U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.9 MiB/s done Bytes transferred = 8081920 (7b5200 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 3.3 MiB/s done Bytes transferred = 51470 (c90e hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7b5200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffff90d ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc1-next-20171128-334872-g5bef2980adef (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Nov 27 20:03:50 PST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef8c000 s39232 r8192 d22208 u69632 [ 0.000000] pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1992476K/2096128K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e00000 (12256 kB) [ 0.000000] .init : 0xc1300000 - 0xc1500000 (2048 kB) [ 0.000000] .data : 0xc1500000 - 0xc1690b70 (1603 kB) [ 0.000000] .bss : 0xc1690b70 - 0xc16f5de4 ( 405 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000013] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000030] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000039] Switching to timer-based delay loop, resolution 1000ns [ 0.002975] Console: colour dummy device 80x30 [ 0.003006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.003017] pid_max: default: 32768 minimum: 301 [ 0.003109] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003118] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003523] CPU: Testing write buffer coherency: ok [ 0.003843] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004068] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.005442] Hierarchical SRCU implementation. [ 0.006787] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.007359] EFI services will not be available. [ 0.007464] smp: Bringing up secondary CPUs ... [ 0.010374] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020352] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.030333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.030390] smp: Brought up 1 node, 4 CPUs [ 0.030403] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.030408] CPU: All CPU(s) started in SVC mode. [ 0.031133] devtmpfs: initialized [ 0.038071] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.038505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038524] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.041962] pinctrl core: initialized pinctrl subsystem [ 0.043370] DMI not present or invalid. [ 0.043630] NET: Registered protocol family 16 [ 0.046476] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048179] cpuidle: using governor menu [ 0.061593] No ATAGs? [ 0.061701] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.061713] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.066055] Serial: AMBA PL011 UART driver [ 0.066660] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.066754] iommu: Adding device reg-dummy to group 0 [ 0.066786] iommu: Adding device 3000.pcie to group 1 [ 0.066806] iommu: Adding device 50000000.host1x to group 2 [ 0.066826] iommu: Adding device 54040000.mpe to group 3 [ 0.066850] iommu: Adding device 54080000.vi to group 4 [ 0.066868] iommu: Adding device 540c0000.epp to group 5 [ 0.066886] iommu: Adding device 54100000.isp to group 6 [ 0.066904] iommu: Adding device 54140000.gr2d to group 7 [ 0.066922] iommu: Adding device 54180000.gr3d to group 8 [ 0.066991] iommu: Adding device 54200000.dc to group 9 [ 0.067032] iommu: Adding device 54240000.dc to group 10 [ 0.067057] iommu: Adding device 54280000.hdmi to group 11 [ 0.067081] iommu: Adding device 50040600.timer to group 12 [ 0.067101] iommu: Adding device 50043000.cache-controller to group 13 [ 0.067118] iommu: Adding device 60005000.timer to group 14 [ 0.067136] iommu: Adding device 60007000.flow-controller to group 15 [ 0.067153] iommu: Adding device 6000a000.dma to group 16 [ 0.067170] iommu: Adding device 6000c000.ahb to group 17 [ 0.067188] iommu: Adding device 6000d000.gpio to group 18 [ 0.067204] iommu: Adding device 70000800.apbmisc to group 19 [ 0.067227] iommu: Adding device 70000868.pinmux to group 20 [ 0.067247] iommu: Adding device 70006000.serial to group 21 [ 0.067270] iommu: Adding device 7000e000.rtc to group 22 [ 0.067289] iommu: Adding device 7000c000.i2c to group 23 [ 0.067307] iommu: Adding device 7000c400.i2c to group 24 [ 0.067326] iommu: Adding device 7000c500.i2c to group 25 [ 0.067348] iommu: Adding device 7000c700.i2c to group 26 [ 0.067366] iommu: Adding device 7000d000.i2c to group 27 [ 0.067388] iommu: Adding device 7000da00.spi to group 28 [ 0.067407] iommu: Adding device 7000e400.pmc to group 29 [ 0.067425] iommu: Adding device 7000f000.memory-controller to group 30 [ 0.067444] iommu: Adding device 7000f800.fuse to group 31 [ 0.067461] iommu: Adding device 70080000.ahub to group 32 [ 0.067487] iommu: Adding device 78000000.sdhci to group 33 [ 0.067505] iommu: Adding device 78000600.sdhci to group 34 [ 0.067523] iommu: Adding device 7d000000.usb to group 35 [ 0.067542] iommu: Adding device 7d000000.usb-phy to group 36 [ 0.067565] iommu: Adding device 7d004000.usb to group 37 [ 0.067583] iommu: Adding device 7d004000.usb-phy to group 38 [ 0.067601] iommu: Adding device 7d008000.usb to group 39 [ 0.067620] iommu: Adding device 7d008000.usb-phy to group 40 [ 0.067636] iommu: Adding device pmu to group 41 [ 0.067651] iommu: Adding device clocks to group 42 [ 0.067668] iommu: Adding device gpio-leds to group 43 [ 0.067692] iommu: Adding device regulators to group 44 [ 0.067715] iommu: Adding device regulators:regulator@0 to group 45 [ 0.067755] iommu: Adding device regulators:regulator@1 to group 46 [ 0.067773] iommu: Adding device regulators:regulator@2 to group 47 [ 0.067791] iommu: Adding device regulators:regulator@3 to group 48 [ 0.067809] iommu: Adding device regulators:regulator@4 to group 49 [ 0.067827] iommu: Adding device regulators:regulator@5 to group 50 [ 0.067846] iommu: Adding device regulators:regulator@6 to group 51 [ 0.067863] iommu: Adding device regulators:regulator@7 to group 52 [ 0.067887] iommu: Adding device regulators:regulator@8 to group 53 [ 0.067911] iommu: Adding device sound to group 54 [ 0.076489] AT91: Could not find identification node [ 0.076996] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.077011] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.077062] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.077069] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.077117] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.077124] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.077227] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.077235] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.079069] vgaarb: loaded [ 0.079551] SCSI subsystem initialized [ 0.079720] libata version 3.00 loaded. [ 0.079857] usbcore: registered new interface driver usbfs [ 0.079886] usbcore: registered new interface driver hub [ 0.079966] usbcore: registered new device driver usb [ 0.084316] iommu: Adding device tps65910-gpio to group 55 [ 0.084603] iommu: Adding device tps65910-pmic to group 56 [ 0.087082] vrtc: supplied by vdd_5v_in [ 0.090371] vio: supplied by vdd_5v_in [ 0.101812] vdd1: supplied by vdd_5v_in [ 0.103173] vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV [ 0.111819] vdd2: supplied by vdd_5v_in [ 0.131811] ldo1: supplied by vdd_1v5_gen [ 0.134182] ldo2: supplied by vdd_1v5_gen [ 0.134653] vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV [ 0.136876] ldo3: supplied by vdd_5v_in [ 0.139214] ldo4: supplied by vdd_5v_in [ 0.141816] ldo5: supplied by vdd_5v_in [ 0.151799] ldo6: supplied by vdd_1v8_gen [ 0.152270] avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV [ 0.154503] ldo7: supplied by vdd_1v8_gen [ 0.161799] ldo8: supplied by vdd_1v8_gen [ 0.170079] iommu: Adding device tps65910-rtc to group 57 [ 0.170202] iommu: Adding device tps65910-power to group 58 [ 0.171958] pps_core: LinuxPPS API ver. 1 registered [ 0.171966] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.171978] PTP clock support registered [ 0.172118] EDAC MC: Ver: 3.0.0 [ 0.173674] clocksource: Switched to clocksource timer_us [ 0.203601] NET: Registered protocol family 2 [ 0.204046] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.204104] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.204185] TCP: Hash tables configured (established 8192 bind 8192) [ 0.204341] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.204404] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.204579] NET: Registered protocol family 1 [ 0.204922] RPC: Registered named UNIX socket transport module. [ 0.204931] RPC: Registered udp transport module. [ 0.204935] RPC: Registered tcp transport module. [ 0.204939] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.204949] PCI: CLS 0 bytes, default 64 [ 0.205777] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.206020] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.206530] iommu: Adding device alarmtimer to group 59 [ 0.207119] Initialise system trusted keyrings [ 0.207238] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.210958] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.211364] NFS: Registering the id_resolver key type [ 0.211385] Key type id_resolver registered [ 0.211390] Key type id_legacy registered [ 0.211420] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.212423] Key type asymmetric registered [ 0.212431] Asymmetric key parser 'x509' registered [ 0.212465] bounce: pool size: 64 pages [ 0.212516] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.212525] io scheduler noop registered [ 0.212530] io scheduler deadline registered [ 0.212661] io scheduler cfq registered (default) [ 0.212668] io scheduler mq-deadline registered [ 0.212673] io scheduler kyber registered [ 0.219447] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.219469] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.219483] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.219492] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.219931] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.219975] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.220295] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.220307] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.220319] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.220358] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.220387] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.220416] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.220462] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.220940] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.221052] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.226504] tegra-pcie 3000.pcie: 2x3 configuration [ 0.226678] tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517 [ 0.232448] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.234668] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.264403] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.264491] iommu: Adding device serial8250 to group 60 [ 0.266544] console [ttyS0] disabled [ 0.266585] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.636934] console [ttyS0] enabled [ 1.640949] SuperH (H)SCI(F) driver initialized [ 1.646120] msm_serial: driver initialized [ 1.650311] STMicroelectronics ASC driver initialized [ 1.675339] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.688381] brd: module loaded [ 1.697040] loop: module loaded [ 1.706125] m25p80 spi0.1: w25q32 (4096 Kbytes) [ 1.711930] iommu: Adding device Fixed MDIO bus.0 to group 61 [ 1.718114] libphy: Fixed MDIO Bus: probed [ 1.722780] CAN device driver interface [ 1.727257] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.733679] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.739497] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.745443] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.752385] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.760134] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.767579] usbcore: registered new interface driver pegasus [ 1.773253] usbcore: registered new interface driver asix [ 1.778666] usbcore: registered new interface driver ax88179_178a [ 1.784771] usbcore: registered new interface driver cdc_ether [ 1.790617] usbcore: registered new interface driver smsc75xx [ 1.796381] usbcore: registered new interface driver smsc95xx [ 1.802126] usbcore: registered new interface driver net1080 [ 1.807798] usbcore: registered new interface driver cdc_subset [ 1.813726] usbcore: registered new interface driver zaurus [ 1.819312] usbcore: registered new interface driver cdc_ncm [ 1.825167] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.832967] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.839492] ehci-pci: EHCI PCI platform driver [ 1.843958] ehci-platform: EHCI generic platform driver [ 1.849295] ehci-orion: EHCI orion driver [ 1.853380] SPEAr-ehci: EHCI SPEAr driver [ 1.857466] ehci-st: EHCI STMicroelectronics driver [ 1.862405] ehci-exynos: EHCI EXYNOS driver [ 1.866678] ehci-atmel: EHCI Atmel driver [ 1.870749] tegra-ehci: Tegra EHCI driver [ 1.875066] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.881241] ohci-pci: OHCI PCI platform driver [ 1.885714] ohci-platform: OHCI generic platform driver [ 1.891040] SPEAr-ohci: OHCI SPEAr driver [ 1.895128] ohci-st: OHCI STMicroelectronics driver [ 1.900069] ohci-atmel: OHCI Atmel driver [ 1.904527] usbcore: registered new interface driver usb-storage [ 1.914074] iommu: Adding device ci_hdrc.0 to group 62 [ 1.924840] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.931990] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.950768] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.958367] i2c /dev entries driver [ 1.970208] sdhci: Secure Digital Host Controller Interface driver [ 1.976399] sdhci: Copyright(c) Pierre Ossman [ 1.981738] Synopsys Designware Multimedia Card Interface Driver [ 1.988595] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.994802] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 1.999677] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 2.012826] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.050806] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 2.063252] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.095511] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.104457] ledtrig-cpu: registered to indicate activity on CPUs [ 2.110746] usbcore: registered new interface driver usbhid [ 2.116316] usbhid: USB HID core driver [ 2.122733] NET: Registered protocol family 10 [ 2.127939] Segment Routing with IPv6 [ 2.131636] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.137944] NET: Registered protocol family 17 [ 2.142381] can: controller area network core (rev 20170425 abi 9) [ 2.148610] NET: Registered protocol family 29 [ 2.153042] can: raw protocol (rev 20170425) [ 2.157312] can: broadcast manager protocol (rev 20170425 t) [ 2.162959] can: netlink gateway (rev 20170425) max_hops=1 [ 2.168720] Key type dns_resolver registered [ 2.173357] ThumbEE CPU extension supported. [ 2.177642] Registering SWP/SWPB emulation handler [ 2.182815] Loading compiled-in X.509 certificates [ 2.198662] vdd_ddr: supplied by vdd_5v_in [ 2.203587] vdd_5v_sata: supplied by vdd_5v_in [ 2.208392] usb1_vbus: supplied by vdd_5v_in [ 2.212995] usb3_vbus: supplied by vdd_5v_in [ 2.218525] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 2.224471] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 2.226915] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.227277] mmcblk0: mmc0:aaaa SS04G 3.69 GiB [ 2.229866] mmc1: new high speed MMC card at address 0001 [ 2.230514] mmcblk1: mmc1:0001 SEM16G 14.8 GiB [ 2.230825] mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 2.231292] mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 2.231783] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (237:0) [ 2.235296] Primary GPT is invalid, using alternate GPT. [ 2.235313] mmcblk1: p1 p2 p3 p4 p5 [ 2.252187] mmcblk0: p1 p2 p3 [ 2.281885] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 2.288095] tegra-pcie 3000.pcie: 2x3 configuration [ 2.296170] tegra-pcie 3000.pcie: probing port 0, using 2 lanes [ 2.360363] tegra-pcie 3000.pcie: probing port 2, using 2 lanes [ 2.770178] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.179298] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.588415] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.595640] tegra-pcie 3000.pcie: link 2 down, ignoring [ 3.600956] tegra-pcie 3000.pcie: PCI host bridge to bus 0000:00 [ 3.606971] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.613136] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.620003] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.627304] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.632800] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.638814] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.648457] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.658111] pci 0000:00:01.0: enabling Extended Tags [ 3.663065] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.672813] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.682566] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.689177] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.699040] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.708773] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.718416] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 3.728054] PCI: bus0: Fast back to back transfers disabled [ 3.733614] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.741608] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.751338] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.761139] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.767161] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.772735] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.779958] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.787274] PCI: bus1: Fast back to back transfers disabled [ 3.792836] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.799470] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.807206] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.813288] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.821032] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.828773] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.834863] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.839815] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.845903] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.853645] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.860692] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.867002] pcieport 0000:00:01.0: Signaling PME with IRQ 375 [ 3.872986] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.878584] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.884438] r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.893043] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0a2a000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18 [ 3.902961] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.916015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.922618] [drm] No driver support for vblank timestamp query. [ 3.928583] [drm] Cannot find any crtc or sizes [ 3.933118] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.942487] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.947910] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.955687] tegra-ehci 7d004000.usb: irq 344, io mem 0x7d004000 [ 3.961634] [drm] Cannot find any crtc or sizes [ 3.984068] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.991302] hub 1-0:1.0: USB hub found [ 3.995085] hub 1-0:1.0: 1 port detected [ 4.000252] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.005669] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.013410] tegra-ehci 7d008000.usb: irq 345, io mem 0x7d008000 [ 4.044067] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.051190] hub 2-0:1.0: USB hub found [ 4.054966] hub 2-0:1.0: 1 port detected [ 4.064573] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 4.074100] vdd_sata,avdd_plle: disabling [ 4.078844] usb1_vbus: disabling [ 4.083625] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 4.155250] EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended [ 4.165459] EXT4-fs (mmcblk1p1): recovery complete [ 4.171446] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.179576] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 4.195837] devtmpfs: mounted [ 4.201316] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.424096] usb 2-1: new high-speed USB device number 2 using tegra-ehci