U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.5 MiB/s done Bytes transferred = 6356664 (60feb8 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x60feb8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-next-20171127-216118-gb0a84f1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Nov 26 19:32:14 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef88000 s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997468K/2096128K available (9216K kernel code, 777K rwdata, 2820K rodata, 1024K init, 299K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc0f00000 (1024 kB) [ 0.000000] .data : 0xc0f00000 - 0xc0fc27c4 ( 778 kB) [ 0.000000] .bss : 0xc0fc27c4 - 0xc100d42c ( 300 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007468] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016997] Switching to timer-based delay loop, resolution 1000ns [ 0.024228] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029221] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039967] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047936] Switching to timer-based delay loop, resolution 83ns [ 0.054398] Console: colour dummy device 80x30 [ 0.058352] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068660] pid_max: default: 32768 minimum: 301 [ 0.073739] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079846] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087690] CPU: Testing write buffer coherency: ok [ 0.092015] /cpus/cpu@0 missing clock-frequency property [ 0.097019] /cpus/cpu@1 missing clock-frequency property [ 0.102328] /cpus/cpu@2 missing clock-frequency property [ 0.107593] /cpus/cpu@3 missing clock-frequency property [ 0.112864] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152978] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157730] Hierarchical SRCU implementation. [ 0.173515] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.193002] smp: Bringing up secondary CPUs ... [ 0.243625] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323740] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403856] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413439] smp: Brought up 1 node, 4 CPUs [ 0.432528] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438695] CPU: All CPU(s) started in SVC mode. [ 0.445138] devtmpfs: initialized [ 0.465388] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.471513] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.480946] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.488440] pinctrl core: initialized pinctrl subsystem [ 0.493487] NET: Registered protocol family 16 [ 0.498164] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.504866] cpuidle: using governor menu [ 0.530629] No ATAGs? [ 0.530767] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.539127] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.546830] iommu: Adding device reg-dummy to group 0 [ 0.550035] iommu: Adding device 1003000.pcie to group 1 [ 0.555335] iommu: Adding device 50000000.host1x to group 2 [ 0.560891] iommu: Adding device 54200000.dc to group 3 [ 0.566070] iommu: Adding device 54240000.dc to group 4 [ 0.571257] iommu: Adding device 54280000.hdmi to group 5 [ 0.576644] iommu: Adding device 57000000.gpu to group 6 [ 0.581916] iommu: Adding device 60005000.timer to group 7 [ 0.587350] iommu: Adding device 60007000.flow-controller to group 8 [ 0.593696] iommu: Adding device 6000c800.actmon to group 9 [ 0.599225] iommu: Adding device 6000d000.gpio to group 10 [ 0.604702] iommu: Adding device 60020000.dma to group 11 [ 0.610074] iommu: Adding device 70000800.apbmisc to group 12 [ 0.615797] iommu: Adding device 70000868.pinmux to group 13 [ 0.621417] iommu: Adding device 70006000.serial to group 14 [ 0.627062] iommu: Adding device 70006040.serial to group 15 [ 0.632675] iommu: Adding device 70006300.serial to group 16 [ 0.638331] iommu: Adding device 7000c000.i2c to group 17 [ 0.643683] iommu: Adding device 7000c400.i2c to group 18 [ 0.649075] iommu: Adding device 7000c500.i2c to group 19 [ 0.654431] iommu: Adding device 7000c700.i2c to group 20 [ 0.659829] iommu: Adding device 7000d000.i2c to group 21 [ 0.665176] iommu: Adding device 7000d400.spi to group 22 [ 0.670575] iommu: Adding device 7000da00.spi to group 23 [ 0.675926] iommu: Adding device 7000e000.rtc to group 24 [ 0.681316] iommu: Adding device 7000e400.pmc to group 25 [ 0.686668] iommu: Adding device 7000f800.fuse to group 26 [ 0.692148] iommu: Adding device 70019000.memory-controller to group 27 [ 0.698718] iommu: Adding device 7001b000.emc to group 28 [ 0.704114] iommu: Adding device 70027000.sata to group 29 [ 0.709550] iommu: Adding device 70030000.hda to group 30 [ 0.714945] iommu: Adding device 70090000.usb to group 31 [ 0.720297] iommu: Adding device 7009f000.padctl to group 32 [ 0.725964] iommu: Adding device 700b0400.sdhci to group 33 [ 0.731477] iommu: Adding device 700b0600.sdhci to group 34 [ 0.737042] iommu: Adding device 70015000.cec to group 35 [ 0.742411] iommu: Adding device 700e2000.thermal-sensor to group 36 [ 0.748745] iommu: Adding device 70110000.clock to group 37 [ 0.754270] iommu: Adding device 70300000.ahub to group 38 [ 0.759750] iommu: Adding device 7d000000.usb to group 39 [ 0.765103] iommu: Adding device 7d000000.usb-phy to group 40 [ 0.770842] iommu: Adding device 7d004000.usb to group 41 [ 0.776198] iommu: Adding device 7d004000.usb-phy to group 42 [ 0.781940] iommu: Adding device 7d008000.usb to group 43 [ 0.787297] iommu: Adding device 7d008000.usb-phy to group 44 [ 0.793028] iommu: Adding device pmu to group 45 [ 0.797604] iommu: Adding device timer to group 46 [ 0.802370] iommu: Adding device clocks to group 47 [ 0.807241] iommu: Adding device gpio-keys to group 48 [ 0.812339] iommu: Adding device regulators to group 49 [ 0.817565] iommu: Adding device regulators:regulator@0 to group 50 [ 0.823776] iommu: Adding device regulators:regulator@1 to group 51 [ 0.830037] iommu: Adding device regulators:regulator@2 to group 52 [ 0.836257] iommu: Adding device regulators:regulator@3 to group 53 [ 0.842514] iommu: Adding device regulators:regulator@4 to group 54 [ 0.848743] iommu: Adding device regulators:regulator@7 to group 55 [ 0.854996] iommu: Adding device regulators:regulator@8 to group 56 [ 0.861225] iommu: Adding device regulators:regulator@10 to group 57 [ 0.867561] iommu: Adding device regulators:regulator@11 to group 58 [ 0.873870] iommu: Adding device regulators:regulator@12 to group 59 [ 0.880215] iommu: Adding device regulators:regulator@13 to group 60 [ 0.886524] iommu: Adding device regulators:regulator@14 to group 61 [ 0.892867] iommu: Adding device sound to group 62 [ 0.914647] +5V_SYS: supplied by +VDD_MUX [ 0.917137] +3.3V_SYS: supplied by +VDD_MUX [ 0.921690] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.927020] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.935141] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.940866] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.949095] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.955883] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.964083] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.969898] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.978123] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.983677] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.991903] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.997542] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 1.006988] vgaarb: loaded [ 1.009134] SCSI subsystem initialized [ 1.012338] libata version 3.00 loaded. [ 1.016219] usbcore: registered new interface driver usbfs [ 1.021445] usbcore: registered new interface driver hub [ 1.026746] usbcore: registered new device driver usb [ 1.034951] Linux video capture interface: v2.00 [ 1.037732] pps_core: LinuxPPS API ver. 1 registered [ 1.042631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.051737] PTP clock support registered [ 1.057042] Advanced Linux Sound Architecture Driver Initialized. [ 1.062311] Bluetooth: Core ver 2.22 [ 1.065267] NET: Registered protocol family 31 [ 1.069666] Bluetooth: HCI device and connection manager initialized [ 1.075971] Bluetooth: HCI socket layer initialized [ 1.080843] Bluetooth: L2CAP socket layer initialized [ 1.085879] Bluetooth: SCO socket layer initialized [ 1.091362] clocksource: Switched to clocksource arch_sys_counter [ 1.186080] NET: Registered protocol family 2 [ 1.189532] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.195672] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.202156] TCP: Hash tables configured (established 8192 bind 8192) [ 1.208775] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.214241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.220833] NET: Registered protocol family 1 [ 1.225577] RPC: Registered named UNIX socket transport module. [ 1.230735] RPC: Registered udp transport module. [ 1.235441] RPC: Registered tcp transport module. [ 1.240095] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.246971] iommu: Adding device regulatory.0 to group 63 [ 1.252101] PCI: CLS 0 bytes, default 64 [ 1.257598] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.264669] iommu: Adding device alarmtimer to group 64 [ 1.270268] Initialise system trusted keyrings [ 1.273760] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.281321] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.286607] NFS: Registering the id_resolver key type [ 1.290810] Key type id_resolver registered [ 1.294987] Key type id_legacy registered [ 1.303879] Key type asymmetric registered [ 1.306065] Asymmetric key parser 'x509' registered [ 1.311049] bounce: pool size: 64 pages [ 1.314829] io scheduler noop registered (default) [ 1.319499] io scheduler mq-deadline registered [ 1.324050] io scheduler kyber registered [ 1.329832] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.334825] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.341779] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.357847] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.361583] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.371502] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.382206] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.389164] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.394755] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.400537] iommu: Adding device serial8250 to group 65 [ 1.407486] console [ttyS0] disabled [ 1.409224] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.418195] console [ttyS0] enabled [ 1.418195] console [ttyS0] enabled [ 1.424740] bootconsole [earlycon0] disabled [ 1.424740] bootconsole [earlycon0] disabled [ 1.433756] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.444774] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.473444] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.492989] loop: module loaded [ 1.497484] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.504929] as3722 4-0040: AS3722 with revision 0x1 found [ 1.512544] iommu: Adding device as3722-pinctrl to group 66 [ 1.519808] iommu: Adding device as3722-regulator to group 67 [ 1.528497] as3722-sd2: supplied by +5V_SYS [ 1.533191] as3722-sd3: supplied by +5V_SYS [ 1.537618] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.544008] as3722-sd4: supplied by +5V_SYS [ 1.548663] as3722-sd5: supplied by +5V_SYS [ 1.554771] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.560859] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.567121] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.573097] as3722-ldo3: supplied by +3.3V_SYS [ 1.577591] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.585425] as3722-ldo4: supplied by +3.3V_SYS [ 1.590102] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.596369] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.601212] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.608190] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.613865] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.620043] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.630281] iommu: Adding device as3722-rtc to group 68 [ 1.635714] iommu: Adding device as3722-adc to group 69 [ 1.641082] iommu: Adding device as3722-power-off to group 70 [ 1.646999] iommu: Adding device as3722-wdt to group 71 [ 1.653030] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.671749] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.678446] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.684402] libphy: Fixed MDIO Bus: probed [ 1.688495] CAN device driver interface [ 1.692431] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.699382] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.705111] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.712610] usbcore: registered new interface driver pegasus [ 1.718330] usbcore: registered new interface driver asix [ 1.723817] usbcore: registered new interface driver ax88179_178a [ 1.729953] usbcore: registered new interface driver cdc_ether [ 1.735901] usbcore: registered new interface driver smsc75xx [ 1.741733] usbcore: registered new interface driver smsc95xx [ 1.747523] usbcore: registered new interface driver net1080 [ 1.753278] usbcore: registered new interface driver cdc_subset [ 1.759240] usbcore: registered new interface driver zaurus [ 1.764924] usbcore: registered new interface driver cdc_ncm [ 1.770824] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.776497] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.782222] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.788740] ehci-pci: EHCI PCI platform driver [ 1.793264] tegra-ehci: Tegra EHCI driver [ 1.800115] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.805554] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.813372] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.841398] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.848214] hub 1-0:1.0: USB hub found [ 1.852025] hub 1-0:1.0: 1 port detected [ 1.857195] usbcore: registered new interface driver cdc_acm [ 1.862869] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.870927] usbcore: registered new interface driver cdc_wdm [ 1.876686] usbcore: registered new interface driver usb-storage [ 1.884332] iommu: Adding device ci_hdrc.0 to group 73 [ 1.896267] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.903166] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.910936] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.918136] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.924675] i2c /dev entries driver [ 1.929424] usbcore: registered new interface driver uvcvideo [ 1.935187] USB Video Class driver (1.1.1) [ 1.939277] gspca_main: v2.14.0 registered [ 1.944031] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.954305] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.962803] iommu: Adding device cpufreq-tegra124 to group 74 [ 1.969114] sdhci: Secure Digital Host Controller Interface driver [ 1.975308] sdhci: Copyright(c) Pierre Ossman [ 1.979659] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.985653] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.990544] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.011419] mmc0: Unknown controller version (3). You may experience problems. [ 2.018676] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.081436] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.092929] usbcore: registered new interface driver usbhid [ 2.098601] usbhid: USB HID core driver [ 2.105513] iommu: Adding device snd-soc-dummy to group 75 [ 2.157816] mmc0: new high speed MMC card at address 0001 [ 2.163834] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.168762] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.175154] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.181252] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 2.190239] mmcblk0: p1 [ 2.551862] iommu: Adding device 70301100.i2s to group 76 [ 2.558138] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.578511] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.589260] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.600472] NET: Registered protocol family 10 [ 2.606284] Segment Routing with IPv6 [ 2.610119] mip6: Mobile IPv6 [ 2.613109] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.620511] NET: Registered protocol family 17 [ 2.625030] NET: Registered protocol family 15 [ 2.629482] can: controller area network core (rev 20170425 abi 9) [ 2.635881] NET: Registered protocol family 29 [ 2.640321] can: raw protocol (rev 20170425) [ 2.644603] can: broadcast manager protocol (rev 20170425 t) [ 2.650264] can: netlink gateway (rev 20170425) max_hops=1 [ 2.655997] Bluetooth: RFCOMM socket layer initialized [ 2.661147] Bluetooth: RFCOMM ver 1.11 [ 2.664934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.670246] Bluetooth: BNEP socket layer initialized [ 2.675222] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.681139] Bluetooth: HIDP socket layer initialized [ 2.686370] Key type dns_resolver registered [ 2.691146] Registering SWP/SWPB emulation handler [ 2.696743] Loading compiled-in X.509 certificates [ 2.719035] +3.3V_RUN: supplied by +3.3V_SYS [ 2.724181] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.728881] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.734916] +5V_USB_HS: supplied by +5V_SYS [ 2.740018] +3.3V_LP0: supplied by +3.3V_SYS [ 2.745366] +5V_HDMI_CON: supplied by +5V_SYS [ 2.750139] +5V_SATA: supplied by +5V_SYS [ 2.754818] +12V_SATA: supplied by +VDD_MUX [ 2.760448] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.767327] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.774517] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.782025] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.787639] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.796752] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.805757] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.814267] as3722-sd2: supplied by +5V_SYS [ 2.818755] as3722-sd3: supplied by +5V_SYS [ 2.823290] as3722-sd4: supplied by +5V_SYS [ 2.827776] as3722-sd5: supplied by +5V_SYS [ 2.833722] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.839202] as3722-ldo1: supplied by +3.3V_RUN [ 2.844406] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.849945] as3722-ldo3: supplied by +3.3V_SYS [ 2.855485] as3722-ldo4: supplied by +3.3V_SYS [ 2.860236] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.866049] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.874693] as3722-ldo6: supplied by +3.3V_RUN [ 2.879685] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.885153] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.892275] as3722-ldo9: supplied by +5V_SYS [ 2.897740] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.904498] as3722-ldo10: supplied by +5V_SYS [ 2.909604] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.916473] as3722-ldo11: supplied by +3.3V_RUN [ 2.921759] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.930995] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.940074] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.950616] scsi host0: tegra-ahci [ 2.955069] scsi host1: tegra-ahci [ 2.958774] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.966818] ata2: DUMMY [ 2.970419] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.975901] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.983754] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 3.011495] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.018606] hub 2-0:1.0: USB hub found [ 3.022486] hub 2-0:1.0: 1 port detected [ 3.102168] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 3.109593] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.115040] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 3.125221] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 3.133912] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 3.141305] hub 3-0:1.0: USB hub found [ 3.145181] hub 3-0:1.0: 6 ports detected [ 3.150051] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.155518] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 3.163264] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.172610] hub 4-0:1.0: USB hub found [ 3.176414] hub 4-0:1.0: 2 ports detected [ 3.182486] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.187412] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.200699] mmc1: Unknown controller version (3). You may experience problems. [ 3.208054] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.281768] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 3.289509] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 3.294596] ata1: SATA link down (SStatus 0 SControl 300) [ 3.303616] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 3.314020] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 3.335418] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 3.343751] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 3.357672] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 3.363981] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.370156] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 3.377045] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 3.384416] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.390005] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 3.396079] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.405745] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.415433] pci 0000:00:01.0: enabling Extended Tags [ 3.420397] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.430203] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.440044] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.446717] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.456730] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.462766] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.472466] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.482210] pci 0000:00:02.0: enabling Extended Tags [ 3.487216] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.496988] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.506775] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.513502] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.523675] PCI: bus0: Fast back to back transfers disabled [ 3.529330] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.537412] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.545709] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.551838] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.558953] PCI: bus1: Fast back to back transfers disabled [ 3.564609] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.571528] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.577627] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.583314] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.590294] mmc1: new high speed SDHC card at address aaaa [ 3.596386] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.601518] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.609333] PCI: bus2: Fast back to back transfers disabled [ 3.615028] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.621891] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.628750] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.635729] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.643576] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.649829] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.657268] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.662524] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.669402] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.677450] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.684885] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.691130] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.696204] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.702509] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.709366] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.717347] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.724664] mmcblk1: p1 p2 p3 [ 3.727986] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.734877] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.741447] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.748533] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.755080] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.761258] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.766920] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.772854] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.803215] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a0e000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22 [ 3.812805] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.824971] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.834393] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.841019] [drm] No driver support for vblank timestamp query. [ 3.978001] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 4.224551] Console: switching to colour frame buffer device 512x135 [ 4.320540] drm drm: fb0: frame buffer device [ 4.325081] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 4.332453] iommu: Adding device cpufreq-dt.0 to group 77 [ 4.338116] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 4.345461] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 4.354492] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 4.361607] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815) [ 4.370335] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.380052] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.386703] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.391760] +USB0_VBUS_SW: disabling [ 4.391777] +1.8V_RUN_CAM: disabling [ 4.395350] +2.8V_RUN_CAM: disabling [ 4.399035] +1.2V_RUN_CAM_FRONT: disabling [ 4.402657] +1.05V_RUN_CAM_REAR: disabling [ 4.406244] +3.3V_RUN_TOUCH: disabling [ 4.410347] +2.8V_RUN_CAM_AF: disabling [ 4.414468] +1.8V_RUN_VPP_FUSE: disabling [ 4.418229] ALSA device list: [ 4.418232] #0: tegra-hda at 0x70038000 irq 346 [ 4.418234] #1: NVIDIA Tegra Jetson TK1 [ 4.437717] cfg80211: failed to load regulatory.db [ 4.443503] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.491533] EXT4-fs (mmcblk0p1): recovery complete [ 4.497324] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.505497] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.516683] devtmpfs: mounted [ 4.520062] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#