Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.455011211 -0800
+++ /tmp/foob	2017-11-09 21:41:50.459011228 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Nov 9 21:34:52 PST 2017
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -27,15 +27,15 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 258048
 Policy zone: DMA
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-Memory: 998744K/1048576K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 33448K reserved, 16384K cma-reserved)
+Memory: 998740K/1048576K available (9404K kernel code, 1150K rwdata, 4716K rodata, 1088K init, 395K bss, 33452K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
     .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
       .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
-      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
-       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907fa00   (  1151 KB)
+       .bss : 0xffff00000907fa00 - 0xffff0000090e2760   (   396 KB)
     fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -75,7 +75,7 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
 vdso: 2 pages (1 code @ ffff0000089b6000, 1 data @ ffff000008f65000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
@@ -182,7 +182,7 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-11-09 06:56:34 UTC (1510210594)
+rtc-pl031 9010000.pl031: setting system clock to 2017-11-10 05:38:13 UTC (1510292293)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.463011246 -0800
+++ /tmp/foob	2017-11-09 21:41:50.467011262 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 3.1 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 19.5 KiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Nov 9 21:31:48 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c16807c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -85,7 +85,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992548K/2096128K available (11264K kernel code, 1600K rwdata, 4556K rodata, 2048K init, 404K bss, 38044K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992548K/2096128K available (11264K kernel code, 1601K rwdata, 4556K rodata, 2048K init, 404K bss, 38044K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690280   (1601 kB)
-       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
+      .data : 0xc1500000 - 0xc16907b4   (1602 kB)
+       .bss : 0xc16907b4 - 0xc16f5b74   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -375,8 +375,8 @@
 usb2_vbus: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  mmcblk0: p1 p2 p3
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
@@ -393,9 +393,8 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-01 13:45:21 UTC (954596721)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-02 12:30:03 UTC (954678603)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -407,4 +406,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    2.929165] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.471011280 -0800
+++ /tmp/foob	2017-11-09 21:41:50.475011298 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -40,18 +40,18 @@
 	 #########################################
 	 3.2 MiB/s
 done
-Bytes transferred = 6326376 (608868 hex)
+Bytes transferred = 6326032 (608710 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 863.3 KiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x608868 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x608710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Nov 9 21:31:41 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -70,7 +70,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0faf2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0faf300, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
-       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2874   ( 779 kB)
+       .bss : 0xc0fc2874 - 0xc100d4f4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -389,9 +389,8 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-01 13:47:58 UTC (954596878)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-02 12:32:56 UTC (954678776)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -409,4 +408,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    3.191332] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.479011317 -0800
+++ /tmp/foob	2017-11-09 21:41:50.483011334 -0800
@@ -14,7 +14,7 @@
 Out:   serial
 Err:   serial
 Net:   No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Jetson TK1) # 
 Tegra124 (Jetson TK1) # pci enum
 Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 3.6 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -44,7 +44,7 @@
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Nov 9 21:31:48 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c16807c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -80,7 +80,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992440K/2096128K available (11264K kernel code, 1600K rwdata, 4556K rodata, 2048K init, 404K bss, 38152K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992440K/2096128K available (11264K kernel code, 1601K rwdata, 4556K rodata, 2048K init, 404K bss, 38152K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,8 +90,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690280   (1601 kB)
-       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
+      .data : 0xc1500000 - 0xc16907b4   (1602 kB)
+       .bss : 0xc16907b4 - 0xc16f5b74   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -345,7 +345,6 @@
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -433,7 +432,6 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-hub 2-0:1.0: config failed, can't get hub status (err 2)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
@@ -512,7 +510,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -522,9 +520,9 @@
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 ata1: SATA link down (SStatus 0 SControl 300)
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
  mmcblk1: p1 p2 p3
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
@@ -536,8 +534,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
-Console: switching to colour frame buffer device 512x135
 Freeing unused kernel memory: 2048K
+Console: switching to colour frame buffer device 512x135
 drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.487011351 -0800
+++ /tmp/foob	2017-11-09 21:41:50.491011368 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 4 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6326376 (608868 hex)
+Bytes transferred = 6326032 (608710 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x608868 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x608710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Nov 9 21:31:41 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -65,7 +65,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0faf2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0faf300, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -88,8 +88,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
-       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2874   ( 779 kB)
+       .bss : 0xc0fc2874 - 0xc100d4f4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -330,7 +330,6 @@
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
@@ -435,7 +434,6 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-hub 2-0:1.0: config failed, can't get hub status (err 2)
 tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
 tegra-xusb 70090000.usb: xHCI Host Controller
 tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3
@@ -443,21 +441,19 @@
 tegra-xusb 70090000.usb: irq 347, io mem 0x70090000
 hub 3-0:1.0: USB hub found
 hub 3-0:1.0: 6 ports detected
-hub 3-0:1.0: config failed, can't get hub status (err 2)
 tegra-xusb 70090000.usb: xHCI Host Controller
 tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4
 usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
 hub 4-0:1.0: USB hub found
 hub 4-0:1.0: 2 ports detected
-hub 4-0:1.0: config failed, can't get hub status (err 2)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
+ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
@@ -490,10 +486,10 @@
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
@@ -511,8 +507,8 @@
 pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
  mmcblk1: p1 p2 p3
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
@@ -534,7 +530,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:25 UTC (946684945)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.495011385 -0800
+++ /tmp/foob	2017-11-09 21:41:50.499011403 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 3.6 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -52,7 +52,7 @@
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Nov 9 21:31:48 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c16807c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -89,7 +89,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993456K/2097148K available (11264K kernel code, 1600K rwdata, 4556K rodata, 2048K init, 404K bss, 38156K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1993456K/2097148K available (11264K kernel code, 1601K rwdata, 4556K rodata, 2048K init, 404K bss, 38156K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,8 +99,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690280   (1601 kB)
-       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
+      .data : 0xc1500000 - 0xc16907b4   (1602 kB)
+       .bss : 0xc16907b4 - 0xc16f5b74   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -369,6 +369,8 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
@@ -386,7 +388,7 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+mmc0: new high speed MMC card at address 0001
 +3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
@@ -408,12 +410,6 @@
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
@@ -421,7 +417,11 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc2: new high speed SDHC card at address 0007
@@ -436,7 +436,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-09 16:08:46 UTC (947434126)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-10 14:53:43 UTC (947516023)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.503011421 -0800
+++ /tmp/foob	2017-11-09 21:41:50.507011439 -0800
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 3.6 MiB/s
+	 3 MiB/s
 done
-Bytes transferred = 6326376 (608868 hex)
+Bytes transferred = 6326032 (608710 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x608868 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x608710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Nov 9 21:31:41 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,7 +74,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0faf2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0faf300, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -97,8 +97,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
-       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2874   ( 779 kB)
+       .bss : 0xc0fc2874 - 0xc100d4f4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -314,14 +314,14 @@
 kernel BUG at drivers/platform/chrome/cros_ec_proto.c:34!
 Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8-next-20171109-214194-g5515cf1 #1
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8-next-20171110-214456-gd9e0e63 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 task: ee890740 task.stack: ee8a6000
 PC is at cros_ec_prepare_tx+0x168/0x16c
 LR is at cros_ec_pkt_xfer_spi+0x18/0x474
-pc : [<c06e6360>]    lr : [<c0554d60>]    psr: 20000013
+pc : [<c06e68f8>]    lr : [<c05551e8>]    psr: 20000013
 sp : ee8a7bd8  ip : 00000000  fp : 00000000
-r10: c0554d48  r9 : 00000000  r8 : eefe7fb4
+r10: c05551d0  r9 : 00000000  r8 : eefe7fb4
 r7 : ee28cac0  r6 : ee28cac0  r5 : ee28cac0  r4 : ee270e50
 r3 : 0000ffff  r2 : 00000000  r1 : 0000ffff  r0 : ee270e50
 Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
@@ -329,131 +329,131 @@
 Process swapper/0 (pid: 1, stack limit = 0xee8a6210)
 Stack: (0xee8a7bd8 to 0xee8a8000)
 7bc0:                                                       ee270e50 ee28cac0
-7be0: ee28cb50 c0554d60 c098aaec 00000004 ee8a7c5c ee8a7c5c ee28b800 00000000
-7c00: c05a1368 00000000 00000008 00000008 00000000 ee8a7c14 ee8a7c14 00000000
+7be0: ee28cb50 c05551e8 c098b0dc 00000004 ee8a7c5c ee8a7c5c ee28b800 00000000
+7c00: c05a189c 00000000 00000008 00000008 00000000 ee8a7c14 ee8a7c14 00000000
 7c20: ee8a7c20 ee8a7c20 ee28cb10 ee28ca40 00000008 00000000 00000000 00000000
-7c40: c0e90cd0 c023b458 40002800 00000540 eef94cd0 c023d8bc 002dc6c0 ee8a7bf0
-7c60: ee8a7bf0 00000000 c06e6190 005c5180 3b9aca00 000f4240 00000000 ee8a7ca8
-7c80: 00000001 00000501 c0554d48 c098f428 00000000 ee28ca80 a0000013 c06e6190
-7ca0: ee28cac0 ee270e50 ee28cac0 ee28b800 ee28cac0 eefe7fb4 00000000 c0554d48
-7cc0: 00000000 c06e60ec 0000400b ee270e50 ee28cac0 ee28b800 0000000c eefe7fb4
-7ce0: c0fecebc c06e6508 00000000 ee270e50 ee28b800 00000000 00000000 eefe7fb4
-7d00: c0f6c308 c05547ec ee8a7d14 ee28b800 00000000 00000001 ee28b800 ee270e50
-7d20: ee28cb50 c0554b9c 00000000 00000000 00000000 000007d0 ee28b800 00000000
-7d40: c0f6c2f8 c0ffe168 00000000 c05a1dac ee28b800 c0ffe164 00000000 c0530730
-7d60: 00000000 ee8a7d98 c05308dc 00000001 c0ffe140 00000000 00000000 c052ed38
-7d80: ee9f1170 ee2605b8 ee28b800 ee28b834 c0f72e34 c0530458 ee28b800 00000001
-7da0: 00000000 ee28b800 ee28b800 c0f72e34 ee03a000 c052fa9c ee28b800 00000000
-7dc0: ee28b808 c052e0e0 ee28b800 c05a4d18 00000000 ee28b800 ee28b800 ee03a000
-7de0: 00000000 eea8be10 eefe8004 00000001 00000000 c05a1c00 002dc6c0 ee03a000
-7e00: eefe7fb4 00000000 ee28b800 c05a3ba0 00000000 014000c0 00000000 c05a358c
+7c40: c0e90cd0 c023b10c 40002800 00000540 eef94cd0 c023d570 002dc6c0 ee8a7bf0
+7c60: ee8a7bf0 00000000 c06e6728 005c5180 3b9aca00 000f4240 00000000 ee8a7ca8
+7c80: 00000001 00000501 c05551d0 c098fa18 00000000 ee28ca80 a0000013 c06e6728
+7ca0: ee28cac0 ee270e50 ee28cac0 ee28b800 ee28cac0 eefe7fb4 00000000 c05551d0
+7cc0: 00000000 c06e6684 0000400b ee270e50 ee28cac0 ee28b800 0000000c eefe7fb4
+7ce0: c0fecefc c06e6aa0 00000000 ee270e50 ee28b800 00000000 00000000 eefe7fb4
+7d00: c0f6c308 c0554c74 ee8a7d14 ee28b800 00000000 00000001 ee28b800 ee270e50
+7d20: ee28cb50 c0555024 00000000 00000000 00000000 000007d0 ee28b800 00000000
+7d40: c0f6c2f8 c0ffe1a8 00000000 c05a22e0 ee28b800 c0ffe1a4 00000000 c0530bb0
+7d60: 00000000 ee8a7d98 c0530d5c 00000001 c0ffe180 00000000 00000000 c052f1b8
+7d80: ee9f1170 ee2605b8 ee28b800 ee28b834 c0f72e34 c05308d8 ee28b800 00000001
+7da0: 00000000 ee28b800 ee28b800 c0f72e34 ee03a000 c052ff1c ee28b800 00000000
+7dc0: ee28b808 c052e560 ee28b800 c05a524c 00000000 ee28b800 ee28b800 ee03a000
+7de0: 00000000 eea8be10 eefe8004 00000001 00000000 c05a2134 002dc6c0 ee03a000
+7e00: eefe7fb4 00000000 ee28b800 c05a40d4 00000000 014000c0 00000000 c05a3ac0
 7e20: 00000063 002dc6c0 ee03a000 ee28c610 eea8be00 eea8be10 40000000 00000153
-7e40: 00000000 c05a40c4 eefe7d0c ee03a350 ee03a000 eea8be00 eea8be10 c05a4c50
+7e40: 00000000 c05a45f8 eefe7d0c ee03a350 ee03a000 eea8be00 eea8be10 c05a5184
 7e60: 00000000 ee03a350 ffffffed eea8be10 fffffdfb c0f73790 00000000 00000000
-7e80: c0f73790 c0532048 c0531ff8 eea8be10 c0ffe164 00000000 c0ffe168 c0530730
-7ea0: eea8be10 c0f73790 eea8be44 00000000 0000010e c0e6a83c c0e00594 c05308a4
-7ec0: 00000000 c0f73790 c05307f8 c052edd4 ee8cc55c eea14934 c0f73790 ee287e80
-7ee0: c0f6a8f8 c052fc70 c0c21aa0 c0f73790 00000006 c0f73790 00000006 c0e386a0
-7f00: 00000000 c0531424 c0531c9c c0e83328 00000006 c0101b8c 00000000 c0cc0130
-7f20: 00000100 efffcc45 c0cc0130 0000010e efffcc53 c013e8c8 c0cbec18 00000000
+7e80: c0f73790 c05324c8 c0532478 eea8be10 c0ffe1a4 00000000 c0ffe1a8 c0530bb0
+7ea0: eea8be10 c0f73790 eea8be44 00000000 0000010e c0e6a83c c0e00594 c0530d24
+7ec0: 00000000 c0f73790 c0530c78 c052f254 ee8cc55c eea14934 c0f73790 ee287e80
+7ee0: c0f6a8f8 c05300f0 c0c21b7c c0f73790 00000006 c0f73790 00000006 c0e386a0
+7f00: 00000000 c05318a4 c053211c c0e83328 00000006 c0101b8c 00000000 c0cc01c4
+7f20: 00000100 efffcc45 c0cc01c4 0000010e efffcc53 c013e7fc c0cbecac 00000000
 7f40: 00000006 00000006 efffcc45 efffcc4a 00000000 efffcbc0 00000006 c0e6a82c
-7f60: c0e83328 00000006 c0e6a830 c0fc2840 0000010e c0e00d94 00000006 00000006
-7f80: 00000000 c0e00594 00000000 c0988748 00000000 00000000 00000000 00000000
-7fa0: 00000000 c0988750 00000000 c0107cf0 00000000 00000000 00000000 00000000
+7f60: c0e83328 00000006 c0e6a830 c0fc2880 0000010e c0e00d94 00000006 00000006
+7f80: 00000000 c0e00594 00000000 c0988ce8 00000000 00000000 00000000 00000000
+7fa0: 00000000 c0988cf0 00000000 c0107cf0 00000000 00000000 00000000 00000000
 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
-[<c06e6360>] (cros_ec_prepare_tx) from [<c0554d60>] (cros_ec_pkt_xfer_spi+0x18/0x474)
-[<c0554d60>] (cros_ec_pkt_xfer_spi) from [<c06e60ec>] (send_command+0x20/0xd8)
-[<c06e60ec>] (send_command) from [<c06e6508>] (cros_ec_query_all+0x1a4/0x398)
-[<c06e6508>] (cros_ec_query_all) from [<c05547ec>] (cros_ec_register+0x94/0x21c)
-[<c05547ec>] (cros_ec_register) from [<c0554b9c>] (cros_ec_spi_probe+0x108/0x150)
-[<c0554b9c>] (cros_ec_spi_probe) from [<c05a1dac>] (spi_drv_probe+0x7c/0xa8)
-[<c05a1dac>] (spi_drv_probe) from [<c0530730>] (driver_probe_device+0x250/0x318)
-[<c0530730>] (driver_probe_device) from [<c052ed38>] (bus_for_each_drv+0x44/0x8c)
-[<c052ed38>] (bus_for_each_drv) from [<c0530458>] (__device_attach+0x9c/0x100)
-[<c0530458>] (__device_attach) from [<c052fa9c>] (bus_probe_device+0x84/0x8c)
-[<c052fa9c>] (bus_probe_device) from [<c052e0e0>] (device_add+0x380/0x528)
-[<c052e0e0>] (device_add) from [<c05a1c00>] (spi_add_device+0x88/0x130)
-[<c05a1c00>] (spi_add_device) from [<c05a3ba0>] (spi_register_controller+0x428/0x918)
-[<c05a3ba0>] (spi_register_controller) from [<c05a40c4>] (devm_spi_register_controller+0x34/0x70)
-[<c05a40c4>] (devm_spi_register_controller) from [<c05a4c50>] (tegra_spi_probe+0x298/0x35c)
-[<c05a4c50>] (tegra_spi_probe) from [<c0532048>] (platform_drv_probe+0x50/0xb0)
-[<c0532048>] (platform_drv_probe) from [<c0530730>] (driver_probe_device+0x250/0x318)
-[<c0530730>] (driver_probe_device) from [<c05308a4>] (__driver_attach+0xac/0xb0)
-[<c05308a4>] (__driver_attach) from [<c052edd4>] (bus_for_each_dev+0x54/0x88)
-[<c052edd4>] (bus_for_each_dev) from [<c052fc70>] (bus_add_driver+0xe4/0x1f0)
-[<c052fc70>] (bus_add_driver) from [<c0531424>] (driver_register+0x78/0xf4)
-[<c0531424>] (driver_register) from [<c0101b8c>] (do_one_initcall+0x3c/0x168)
+[<c06e68f8>] (cros_ec_prepare_tx) from [<c05551e8>] (cros_ec_pkt_xfer_spi+0x18/0x474)
+[<c05551e8>] (cros_ec_pkt_xfer_spi) from [<c06e6684>] (send_command+0x20/0xd8)
+[<c06e6684>] (send_command) from [<c06e6aa0>] (cros_ec_query_all+0x1a4/0x398)
+[<c06e6aa0>] (cros_ec_query_all) from [<c0554c74>] (cros_ec_register+0x94/0x21c)
+[<c0554c74>] (cros_ec_register) from [<c0555024>] (cros_ec_spi_probe+0x108/0x150)
+[<c0555024>] (cros_ec_spi_probe) from [<c05a22e0>] (spi_drv_probe+0x7c/0xa8)
+[<c05a22e0>] (spi_drv_probe) from [<c0530bb0>] (driver_probe_device+0x250/0x318)
+[<c0530bb0>] (driver_probe_device) from [<c052f1b8>] (bus_for_each_drv+0x44/0x8c)
+[<c052f1b8>] (bus_for_each_drv) from [<c05308d8>] (__device_attach+0x9c/0x100)
+[<c05308d8>] (__device_attach) from [<c052ff1c>] (bus_probe_device+0x84/0x8c)
+[<c052ff1c>] (bus_probe_device) from [<c052e560>] (device_add+0x380/0x528)
+[<c052e560>] (device_add) from [<c05a2134>] (spi_add_device+0x88/0x130)
+[<c05a2134>] (spi_add_device) from [<c05a40d4>] (spi_register_controller+0x428/0x918)
+[<c05a40d4>] (spi_register_controller) from [<c05a45f8>] (devm_spi_register_controller+0x34/0x70)
+[<c05a45f8>] (devm_spi_register_controller) from [<c05a5184>] (tegra_spi_probe+0x298/0x35c)
+[<c05a5184>] (tegra_spi_probe) from [<c05324c8>] (platform_drv_probe+0x50/0xb0)
+[<c05324c8>] (platform_drv_probe) from [<c0530bb0>] (driver_probe_device+0x250/0x318)
+[<c0530bb0>] (driver_probe_device) from [<c0530d24>] (__driver_attach+0xac/0xb0)
+[<c0530d24>] (__driver_attach) from [<c052f254>] (bus_for_each_dev+0x54/0x88)
+[<c052f254>] (bus_for_each_dev) from [<c05300f0>] (bus_add_driver+0xe4/0x1f0)
+[<c05300f0>] (bus_add_driver) from [<c05318a4>] (driver_register+0x78/0xf4)
+[<c05318a4>] (driver_register) from [<c0101b8c>] (do_one_initcall+0x3c/0x168)
 [<c0101b8c>] (do_one_initcall) from [<c0e00d94>] (kernel_init_freeable+0x10c/0x1d0)
-[<c0e00d94>] (kernel_init_freeable) from [<c0988750>] (kernel_init+0x8/0x114)
-[<c0988750>] (kernel_init) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
+[<c0e00d94>] (kernel_init_freeable) from [<c0988cf0>] (kernel_init+0x8/0x114)
+[<c0988cf0>] (kernel_init) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
 Code: e2800008 e8bd8070 e7f001f2 e7f001f2 (e7f001f2) 
----[ end trace 8cf7087b88cef7da ]---
+---[ end trace 0af9e090202af9e0 ]---
 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
 
 CPU3: stopping
-CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
+CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D          4.14.0-rc8-next-20171110-214456-gd9e0e63 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
-[<c0974e1c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
+[<c010c074>] (show_stack) from [<c09753bc>] (dump_stack+0x84/0xa4)
+[<c09753bc>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
 [<c010f5e0>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
 [<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
 Exception stack(0xee8e3f70 to 0xee8e3fb8)
 3f60:                                     00000001 00000000 ee8e3fc8 c011a380
-3f80: 00000008 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
-3fa0: c06cf2a4 ee8e3fc0 c0108758 c010875c 60000013 ffffffff
+3f80: 00000008 c0f04cdc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cec
+3fa0: 00000002 ee8e3fc0 c0108758 c010875c 60000013 ffffffff
 [<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
-[<c010875c>] (arch_cpu_idle) from [<c0162554>] (do_idle+0x140/0x204)
-[<c0162554>] (do_idle) from [<c01628a0>] (cpu_startup_entry+0x18/0x1c)
-[<c01628a0>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+[<c010875c>] (arch_cpu_idle) from [<c0162468>] (do_idle+0x140/0x204)
+[<c0162468>] (do_idle) from [<c01627b4>] (cpu_startup_entry+0x18/0x1c)
+[<c01627b4>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
 CPU1: stopping
-CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
+CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D          4.14.0-rc8-next-20171110-214456-gd9e0e63 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
-[<c0974e1c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
+[<c010c074>] (show_stack) from [<c09753bc>] (dump_stack+0x84/0xa4)
+[<c09753bc>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
 [<c010f5e0>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
 [<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
 Exception stack(0xee8c1f70 to 0xee8c1fb8)
 1f60:                                     00000001 00000000 ee8c1fc8 c011a380
-1f80: 00000002 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
-1fa0: c06cf2a4 ee8c1fc0 c0108758 c010875c 60000013 ffffffff
+1f80: 00000002 c0f04cdc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cec
+1fa0: c06cf810 ee8c1fc0 c0108758 c010875c 60000013 ffffffff
 [<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
-[<c010875c>] (arch_cpu_idle) from [<c0162554>] (do_idle+0x140/0x204)
-[<c0162554>] (do_idle) from [<c01628a0>] (cpu_startup_entry+0x18/0x1c)
-[<c01628a0>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+[<c010875c>] (arch_cpu_idle) from [<c0162468>] (do_idle+0x140/0x204)
+[<c0162468>] (do_idle) from [<c01627b4>] (cpu_startup_entry+0x18/0x1c)
+[<c01627b4>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
 CPU2: stopping
-CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
+CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D          4.14.0-rc8-next-20171110-214456-gd9e0e63 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
-[<c0974e1c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
+[<c010c074>] (show_stack) from [<c09753bc>] (dump_stack+0x84/0xa4)
+[<c09753bc>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
 [<c010f5e0>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
 [<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
 Exception stack(0xee8e1f70 to 0xee8e1fb8)
 1f60:                                     00000001 00000000 ee8e1fc8 c011a380
-1f80: 00000004 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
+1f80: 00000004 c0f04cdc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cec
 1fa0: 00000002 ee8e1fc0 c0108758 c010875c 60000013 ffffffff
 [<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
-[<c010875c>] (arch_cpu_idle) from [<c0162554>] (do_idle+0x140/0x204)
-[<c0162554>] (do_idle) from [<c01628a0>] (cpu_startup_entry+0x18/0x1c)
-[<c01628a0>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+[<c010875c>] (arch_cpu_idle) from [<c0162468>] (do_idle+0x140/0x204)
+[<c0162468>] (do_idle) from [<c01627b4>] (cpu_startup_entry+0x18/0x1c)
+[<c01627b4>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
 ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
 
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 8 at kernel/irq_work.c:68 irq_work_queue_on+0xbc/0xfc
 Modules linked in:
-CPU: 0 PID: 8 Comm: rcu_preempt Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
+CPU: 0 PID: 8 Comm: rcu_preempt Tainted: G      D          4.14.0-rc8-next-20171110-214456-gd9e0e63 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
-[<c0974e1c>] (dump_stack) from [<c0121a24>] (__warn+0xd8/0x104)
+[<c010c074>] (show_stack) from [<c09753bc>] (dump_stack+0x84/0xa4)
+[<c09753bc>] (dump_stack) from [<c0121a24>] (__warn+0xd8/0x104)
 [<c0121a24>] (__warn) from [<c0121a70>] (warn_slowpath_null+0x20/0x28)
-[<c0121a70>] (warn_slowpath_null) from [<c01d68d4>] (irq_work_queue_on+0xbc/0xfc)
-[<c01d68d4>] (irq_work_queue_on) from [<c0183d58>] (rcu_implicit_dynticks_qs+0x280/0x2a0)
-[<c0183d58>] (rcu_implicit_dynticks_qs) from [<c01824c8>] (force_qs_rnp+0x138/0x1d8)
-[<c01824c8>] (force_qs_rnp) from [<c0182af0>] (rcu_gp_kthread+0x588/0xa50)
-[<c0182af0>] (rcu_gp_kthread) from [<c013f170>] (kthread+0x11c/0x154)
-[<c013f170>] (kthread) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
----[ end trace 8cf7087b88cef7db ]---
+[<c0121a70>] (warn_slowpath_null) from [<c01d6664>] (irq_work_queue_on+0xbc/0xfc)
+[<c01d6664>] (irq_work_queue_on) from [<c0183c6c>] (rcu_implicit_dynticks_qs+0x280/0x2a0)
+[<c0183c6c>] (rcu_implicit_dynticks_qs) from [<c01823dc>] (force_qs_rnp+0x138/0x1d8)
+[<c01823dc>] (force_qs_rnp) from [<c0182a04>] (rcu_gp_kthread+0x588/0xa50)
+[<c0182a04>] (rcu_gp_kthread) from [<c013f0a4>] (kthread+0x11c/0x154)
+[<c013f0a4>] (kthread) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
+---[ end trace 0af9e090202af9e1 ]---
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.511011457 -0800
+++ /tmp/foob	2017-11-09 21:41:50.515011474 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801567 us
+Bootloader-Cpu Init at (time stamp): 1801617 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801541  us
-Bootloader (AosInit) time: 733482 us
-Bootloader Main Init time: 180213 us
-BlockDevMgrInit time: 157549 us
+Miscellaneous avp time: 1801591  us
+Bootloader (AosInit) time: 733491 us
+Bootloader Main Init time: 180188 us
+BlockDevMgrInit time: 157524 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77013 us 
-Display init time: 574554 us
-Kernel read time: 1366 msec
-Load Kernel Size:   18094080 Bytes
-Bl Kernel ReadSpeed: 13246000 Bytes/sec
-Pre-Kernel Jump time: 3886661 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 8870645 us
+Partition Table load: 77110 us 
+Display init time: 574514 us
+Kernel read time: 1365 msec
+Load Kernel Size:   18096128 Bytes
+Bl Kernel ReadSpeed: 13257000 Bytes/sec
+Pre-Kernel Jump time: 3887088 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 8871162 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Nov 9 21:34:52 PST 2017
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -100,15 +100,15 @@
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
 Policy zone: DMA
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
-Memory: 1707988K/1775616K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 51244K reserved, 16384K cma-reserved)
+Memory: 1707984K/1775616K available (9404K kernel code, 1150K rwdata, 4716K rodata, 1088K init, 395K bss, 51248K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
     .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
       .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
-      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
-       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907fa00   (  1151 KB)
+       .bss : 0xffff00000907fa00 - 0xffff0000090e2760   (   396 KB)
     fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.519011491 -0800
+++ /tmp/foob	2017-11-09 21:41:50.523011508 -0800
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 918.9 KiB/s
+	 905.3 KiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Nov 9 21:31:48 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c1680280, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c16807c0, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -92,7 +92,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 953376K/1048576K available (11264K kernel code, 1600K rwdata, 4556K rodata, 2048K init, 404K bss, 29664K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 953376K/1048576K available (11264K kernel code, 1601K rwdata, 4556K rodata, 2048K init, 404K bss, 29664K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -102,8 +102,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690280   (1601 kB)
-       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
+      .data : 0xc1500000 - 0xc16907b4   (1602 kB)
+       .bss : 0xc16907b4 - 0xc16f5b74   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -300,8 +300,6 @@
 tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
-hub 1-0:1.0: activate --> -22
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -313,19 +311,15 @@
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
-hub 1-0:1.0: activate --> -22
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
 sdhci-pltfm: SDHCI platform and OF driver helper
 mmc0: Invalid maximum block size, assuming 512 bytes
-hub 1-0:1.0: activate --> -22
 mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
 sdhci-tegra c8000600.sdhci: Got CD GPIO
 sdhci-tegra c8000600.sdhci: Got WP GPIO
 mmc1: Invalid maximum block size, assuming 512 bytes
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
 mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
@@ -342,181 +336,36 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-hub 1-0:1.0: activate --> -22
 Loading compiled-in X.509 certificates
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-hub 1-0:1.0: activate --> -22
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-hub 2-0:1.0: config failed, can't get hub status (err 2)
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
-Waiting for root device PARTUUID=11eb23c1-01...
 mmc1: new high speed SD card at address b368
-hub 1-0:1.0: activate --> -22
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
  mmcblk1: p1 p2
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
+Waiting for root device PARTUUID=11eb23c1-01...
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
-hub 1-0:1.0: activate --> -22
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
 EXT4-fs (mmcblk0p1): recovery complete
-hub 1-0:1.0: activate --> -22
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
-hub 1-0:1.0: activate --> -22
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-hub 1-0:1.0: activate --> -22
-root@(none):/# [    4.316971] hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
- 
-hub 1-0:1.0: activate --> -22
-root@(none):/# [   10.446888] hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
+root@(none):/#  
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.527011526 -0800
+++ /tmp/foob	2017-11-09 21:41:50.531011544 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -46,20 +46,20 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 905.3 KiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6326376 (608868 hex)
+Bytes transferred = 6326032 (608710 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 898.4 KiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x608868 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x608710 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Nov 9 21:31:41 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -77,7 +77,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0faf2c0, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0faf300, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -100,8 +100,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
-       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2874   ( 779 kB)
+       .bss : 0xc0fc2874 - 0xc100d4f4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 	Tasks RCU enabled.
@@ -286,8 +286,6 @@
 tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
-hub 1-0:1.0: activate --> -22
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
@@ -297,20 +295,16 @@
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
 usbcore: registered new interface driver uvcvideo
-hub 1-0:1.0: activate --> -22
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
 mmc0: Invalid maximum block size, assuming 512 bytes
-hub 1-0:1.0: activate --> -22
 mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
 sdhci-tegra c8000600.sdhci: Got CD GPIO
 sdhci-tegra c8000600.sdhci: Got WP GPIO
-hub 1-0:1.0: activate --> -22
 mmc1: Invalid maximum block size, assuming 512 bytes
-hub 1-0:1.0: activate --> -22
 mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -320,7 +314,6 @@
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
-hub 1-0:1.0: activate --> -22
 NET: Registered protocol family 15
 can: controller area network core (rev 20170425 abi 9)
 NET: Registered protocol family 29
@@ -331,209 +324,46 @@
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 Bluetooth: BNEP socket layer initialized
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
-hub 1-0:1.0: activate --> -22
 Bluetooth: HIDP socket layer initialized
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-hub 1-0:1.0: activate --> -22
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
+mmc1: new high speed SD card at address b368
 tegra-ehci c5000000.usb: EHCI Host Controller
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+ mmcblk1: p1 p2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-hub 1-0:1.0: activate --> -22
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-hub 2-0:1.0: config failed, can't get hub status (err 2)
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 ALSA device list:
   #0: tegra-trimslice
 Waiting for root device PARTUUID=11eb23c1-01...
-cfg80211: failed to load regulatory.db
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
-hub 1-0:1.0: activate --> -22
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-hub 1-0:1.0: activate --> -22
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
-hub 1-0:1.0: activate --> -22
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-root@(none):/# [    3.539498] hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
- 
-root@(none):/# [   11.219500] hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
+root@(none):/#  
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.535011562 -0800
+++ /tmp/foob	2017-11-09 21:41:50.539011579 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 825432 us
-Basic modules init took 348854 us
+Tegraboot started after 767735 us
+Basic modules init took 348471 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14382 us
-Carveout took 252665 us
-CPU initialization took 92467 us
-Total time taken by TegraBoot 708368 us
+Next stage binary read took 14368 us
+Carveout took 252672 us
+CPU initialization took 92433 us
+Total time taken by TegraBoot 707944 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.662] LPDDR4 Training: Number of tables = 10
+64b[0001.606] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-16773632 bytes read in 841 ms (19 MiB/s)
+16775680 bytes read in 841 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44764 bytes read in 453 ms (95.7 KiB/s)
+44764 bytes read in 455 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 494 ms (3.1 MiB/s)
+1627787 bytes read in 496 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Nov 9 21:34:52 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,15 +171,15 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2982368K/3131392K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 132640K reserved, 16384K cma-reserved)
+Memory: 2982364K/3131392K available (9404K kernel code, 1150K rwdata, 4716K rodata, 1088K init, 395K bss, 132644K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
     .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
       .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
-      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
-       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907fa00   (  1151 KB)
+       .bss : 0xffff00000907fa00 - 0xffff0000090e2760   (   396 KB)
     fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -267,7 +267,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8099b000
+kvm [1]: IDMAP page: 8099c000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.543011597 -0800
+++ /tmp/foob	2017-11-09 21:41:50.543011597 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Thu Nov 9 21:34:52 PST 2017
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -30,15 +30,15 @@
 Policy zone: Normal
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2837644K/2988032K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 134004K reserved, 16384K cma-reserved)
+Memory: 2837636K/2988032K available (9404K kernel code, 1150K rwdata, 4716K rodata, 1088K init, 395K bss, 134012K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
     .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
       .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
-      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
-       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907fa00   (  1151 KB)
+       .bss : 0xffff00000907fa00 - 0xffff0000090e2760   (   396 KB)
     fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -148,9 +148,9 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 Unpacking initramfs...
-Freeing initrd memory: 1280K
+Freeing initrd memory: 1284K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8099b000
+kvm [1]: IDMAP page: 8099c000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -230,13 +230,11 @@
 tegra-xusb 70090000.usb: irq 320, io mem 0x70090000
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 5 ports detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
 tegra-xusb 70090000.usb: xHCI Host Controller
 tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2
 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 4 ports detected
-hub 2-0:1.0: config failed, can't get hub status (err 2)
 usbcore: registered new interface driver usb-storage
 max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -258,16 +256,16 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
+max77686-rtc max77620-rtc: setting system clock to 2001-08-21 11:01:05 UTC (998391665)
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-input: gpio-keys as /devices/platform/gpio-keys/input/input0
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-max77686-rtc max77620-rtc: setting system clock to 2001-08-20 12:19:18 UTC (998309958)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.551011630 -0800
+++ /tmp/foob	2017-11-09 21:41:50.551011630 -0800
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Nov 9 21:31:48 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c16807c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -84,7 +84,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992476K/2096128K available (11264K kernel code, 1600K rwdata, 4556K rodata, 2048K init, 404K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992476K/2096128K available (11264K kernel code, 1601K rwdata, 4556K rodata, 2048K init, 404K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690280   (1601 kB)
-       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
+      .data : 0xc1500000 - 0xc16907b4   (1602 kB)
+       .bss : 0xc16907b4 - 0xc16f5b74   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -446,14 +446,12 @@
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci 7d008000.usb: irq 345, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-hub 2-0:1.0: config failed, can't get hub status (err 2)
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 vdd_sata,avdd_plle: disabling
 usb1_vbus: disabling
@@ -466,4 +464,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    4.504028] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-09 21:41:50.559011666 -0800
+++ /tmp/foob	2017-11-09 21:41:50.563011685 -0800
@@ -38,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 3.3 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 6326376 (608868 hex)
+Bytes transferred = 6326032 (608710 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x608868 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x608710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
+Linux version 4.14.0-rc8-next-20171110-214456-gd9e0e63 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Thu Nov 9 21:31:41 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,7 +69,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0faf2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0faf300, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -92,8 +92,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
-       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2874   ( 779 kB)
+       .bss : 0xc0fc2874 - 0xc100d4f4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -442,23 +442,21 @@
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-hub 1-0:1.0: config failed, can't get hub status (err 2)
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci 7d008000.usb: irq 345, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-hub 2-0:1.0: config failed, can't get hub status (err 2)
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 vdd_sata,avdd_plle: disabling
 usb1_vbus: disabling
 ALSA device list:
   #0: NVIDIA Tegra Beaver
+cfg80211: failed to load regulatory.db
 EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT4-fs (mmcblk1p1): recovery complete
@@ -468,4 +466,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    4.737635] usb 2-1: new high-speed USB device number 2 using
\ No newline at end of file
