Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:31.928067017 -0800
+++ /tmp/foob	2017-11-08 22:57:31.932067035 -0800
@@ -0,0 +1,197 @@
+Booting Linux on physical CPU 0x0000000000 [0x411fd070]
+Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
+Machine model: linux,dummy-virt
+Memory limited to 1024MB
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 16 MiB at 0x000000007f000000
+NUMA: No NUMA configuration found
+NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
+NUMA: NODE_DATA [mem 0x7efeb000-0x7efecaff]
+Zone ranges:
+  DMA      [mem 0x0000000040000000-0x000000007fffffff]
+  Normal   empty
+Movable zone start for each node
+Early memory node ranges
+  node   0: [mem 0x0000000040000000-0x000000007fffffff]
+Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
+psci: probing for conduit method from DT.
+psci: PSCIv0.2 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: Trusted OS migration not required
+random: fast init done
+percpu: Embedded 23 pages/cpu @ffff80003efcd000 s55936 r8192 d30080 u94208
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists, mobility grouping on.  Total pages: 258048
+Policy zone: DMA
+Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
+Memory: 998744K/1048576K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 33448K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
+    .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
+      .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
+       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0001000000   (    16 MB actual)
+    memory  : 0xffff800000000000 - 0xffff800040000000   (  1024 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
+Preemptible hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
+	Tasks RCU enabled.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
+NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
+arch_timer: cp15 timer(s) running at 62.50MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
+sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
+Console: colour dummy device 80x25
+Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
+Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
+Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
+ASID allocator initialised with 65536 entries
+Hierarchical SRCU implementation.
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+smp: Brought up 1 node, 1 CPU
+SMP: Total of 1 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
+CPU: All CPU(s) started at EL1
+alternatives: patching kernel code
+devtmpfs: initialized
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+futex hash table entries: 256 (order: 3, 32768 bytes)
+pinctrl core: initialized pinctrl subsystem
+DMI not present or invalid.
+NET: Registered protocol family 16
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
+cpuidle: using governor menu
+vdso: 2 pages (1 code @ ffff0000089b6000, 1 data @ ffff000008f65000)
+hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+DMA: preallocated 256 KiB pool for atomic allocations
+Serial: AMBA PL011 UART driver
+9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
+console [ttyAMA0] enabled
+HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+clocksource: Switched to clocksource arch_sys_counter
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 4, 65536 bytes)
+TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+hw perfevents: enabled with armv8_pmuv3 PMU driver, 1 counters available
+kvm [1]: HYP mode not available
+Initialise system trusted keyrings
+workingset: timestamp_bits=44 max_order=18 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+9p: Installing v9fs 9p2000 file system support
+Key type asymmetric registered
+Asymmetric key parser 'x509' registered
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
+io scheduler noop registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+pl061_gpio 9030000.pl061: PL061 GPIO chip @0x0000000009030000 registered
+OF: PCI: host bridge /pcie@10000000 ranges:
+OF: PCI:    IO 0x3eff0000..0x3effffff -> 0x00000000
+OF: PCI:   MEM 0x10000000..0x3efeffff -> 0x10000000
+OF: PCI:   MEM 0x8000000000..0xffffffffff -> 0x8000000000
+pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
+pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [bus 00-0f]
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
+pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
+Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+ vda: vda1 vda2
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+thunder-xcv, ver 1.0
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+usbcore: registered new interface driver usb-storage
+rtc-pl031 9010000.pl031: rtc core: registered pl031 as rtc0
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+Loading compiled-in X.509 certificates
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+rtc-pl031 9010000.pl031: setting system clock to 2017-11-09 06:56:34 UTC (1510210594)
+ALSA device list:
+  No soundcards found.
+uart-pl011 9000000.pl011: no DMA platform data
+EXT4-fs (vda2): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (vda2): recovery complete
+EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 254:2.
+devtmpfs: mounted
+Freeing unused kernel memory: 1088K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:31.960067160 -0800
+++ /tmp/foob	2017-11-08 22:57:31.964067177 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 2.8 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 19.5 KiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Nov 7 23:03:49 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1680380, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690374   (1601 kB)
-       .bss : 0xc1690374 - 0xc16f5734   ( 405 kB)
+      .data : 0xc1500000 - 0xc1690280   (1601 kB)
+       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -375,8 +375,8 @@
 usb2_vbus: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
- mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+ mmcblk0: p1 p2 p3
 [drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
@@ -395,7 +395,7 @@
 hub 1-0:1.0: 1 port detected
 hub 1-0:1.0: config failed, can't get hub status (err 2)
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-03-31 14:04:34 UTC (954511474)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-01 13:45:21 UTC (954596721)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:31.972067212 -0800
+++ /tmp/foob	2017-11-08 22:57:31.972067212 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6326344 (608848 hex)
+Bytes transferred = 6326376 (608868 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 863.3 KiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x608848 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x608868 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Nov 7 23:03:10 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2828   ( 779 kB)
-       .bss : 0xc0fc2828 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
+       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -391,7 +391,7 @@
 hub 1-0:1.0: 1 port detected
 hub 1-0:1.0: config failed, can't get hub status (err 2)
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-03-31 14:02:01 UTC (954511321)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-01 13:47:58 UTC (954596878)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:31.980067248 -0800
+++ /tmp/foob	2017-11-08 22:57:31.984067265 -0800
@@ -14,7 +14,7 @@
 Out:   serial
 Err:   serial
 Net:   No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Jetson TK1) # 
 Tegra124 (Jetson TK1) # pci enum
 Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
@@ -44,7 +44,7 @@
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Nov 7 23:03:49 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1680380, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -90,8 +90,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690374   (1601 kB)
-       .bss : 0xc1690374 - 0xc16f5734   ( 405 kB)
+      .data : 0xc1500000 - 0xc1690280   (1601 kB)
+       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -394,17 +394,12 @@
 +5V_HDMI_CON: supplied by +5V_SYS
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (237:0)
- mmcblk0: p1
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
+mmc0: new high speed MMC card at address 0001
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
@@ -462,7 +457,6 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
@@ -507,23 +501,18 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a77000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a6d000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
- mmcblk1: p1 p2 p3
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
+[drm] Cannot find any crtc or sizes
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 iommu: Adding device cpufreq-dt.0 to group 74
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:45 UTC (946684965)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -532,12 +521,24 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
+ata1: SATA link down (SStatus 0 SControl 300)
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+ mmcblk1: p1 p2 p3
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (237:0)
+ mmcblk0: p1
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
+VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
+Console: switching to colour frame buffer device 512x135
 Freeing unused kernel memory: 2048K
+drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:31.988067282 -0800
+++ /tmp/foob	2017-11-08 22:57:31.992067300 -0800
@@ -33,9 +33,9 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 3.2 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6326344 (608848 hex)
+Bytes transferred = 6326376 (608868 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x608848 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x608868 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Nov 7 23:03:10 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -88,8 +88,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2828   ( 779 kB)
-       .bss : 0xc0fc2828 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
+       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -454,8 +454,8 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
-ata1: SATA link down (SStatus 0 SControl 300)
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
@@ -492,9 +492,9 @@
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -512,8 +512,8 @@
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:01.0: enabling device (0140 -> 0142)
  mmcblk1: p1 p2 p3
+pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:02.0: enabling device (0140 -> 0143)
@@ -538,6 +538,7 @@
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -549,7 +550,6 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
-cfg80211: failed to load regulatory.db
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:31.996067318 -0800
+++ /tmp/foob	2017-11-08 22:57:32.000067336 -0800
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 3.1 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -52,7 +52,7 @@
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Nov 7 23:03:49 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c1680380, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -99,8 +99,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690374   (1601 kB)
-       .bss : 0xc1690374 - 0xc16f5734   ( 405 kB)
+      .data : 0xc1500000 - 0xc1690280   (1601 kB)
+       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -436,7 +436,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-08 16:25:17 UTC (947348717)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-09 16:08:46 UTC (947434126)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.004067354 -0800
+++ /tmp/foob	2017-11-08 22:57:32.008067370 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 3 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 6326344 (608848 hex)
+Bytes transferred = 6326376 (608868 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.8 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x608848 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x608868 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Nov 7 23:03:10 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -97,8 +97,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2828   ( 779 kB)
-       .bss : 0xc0fc2828 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
+       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -314,14 +314,14 @@
 kernel BUG at drivers/platform/chrome/cros_ec_proto.c:34!
 Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
 Modules linked in:
-CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8-next-20171108-213792-g536f8ff #1
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8-next-20171109-214194-g5515cf1 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 task: ee890740 task.stack: ee8a6000
 PC is at cros_ec_prepare_tx+0x168/0x16c
 LR is at cros_ec_pkt_xfer_spi+0x18/0x474
-pc : [<c06e64d4>]    lr : [<c0554dc8>]    psr: 20000013
+pc : [<c06e6360>]    lr : [<c0554d60>]    psr: 20000013
 sp : ee8a7bd8  ip : 00000000  fp : 00000000
-r10: c0554db0  r9 : 00000000  r8 : eefe7fb4
+r10: c0554d48  r9 : 00000000  r8 : eefe7fb4
 r7 : ee28cac0  r6 : ee28cac0  r5 : ee28cac0  r4 : ee270e50
 r3 : 0000ffff  r2 : 00000000  r1 : 0000ffff  r0 : ee270e50
 Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
@@ -329,131 +329,131 @@
 Process swapper/0 (pid: 1, stack limit = 0xee8a6210)
 Stack: (0xee8a7bd8 to 0xee8a8000)
 7bc0:                                                       ee270e50 ee28cac0
-7be0: ee28cb50 c0554dc8 c098ac0c 00000004 ee8a7c5c ee8a7c5c ee28b800 00000000
-7c00: c05a14e8 00000000 00000008 00000008 00000000 ee8a7c14 ee8a7c14 00000000
+7be0: ee28cb50 c0554d60 c098aaec 00000004 ee8a7c5c ee8a7c5c ee28b800 00000000
+7c00: c05a1368 00000000 00000008 00000008 00000000 ee8a7c14 ee8a7c14 00000000
 7c20: ee8a7c20 ee8a7c20 ee28cb10 ee28ca40 00000008 00000000 00000000 00000000
-7c40: c0e90cd0 c023b44c 40002800 00000540 eef94cd0 c023d8b0 002dc6c0 ee8a7bf0
-7c60: ee8a7bf0 00000000 c06e6304 005c5180 3b9aca00 000f4240 00000000 ee8a7ca8
-7c80: 00000001 00000501 c0554db0 c098f548 00000000 ee28ca80 a0000013 c06e6304
-7ca0: ee28cac0 ee270e50 ee28cac0 ee28b800 ee28cac0 eefe7fb4 00000000 c0554db0
-7cc0: 00000000 c06e6260 0000400b ee270e50 ee28cac0 ee28b800 0000000c eefe7fb4
-7ce0: c0fecebc c06e667c 00000000 ee270e50 ee28b800 00000000 00000000 eefe7fb4
-7d00: c0f6c308 c0554854 ee8a7d14 ee28b800 00000000 00000001 ee28b800 ee270e50
-7d20: ee28cb50 c0554c04 00000000 00000000 00000000 000007d0 ee28b800 00000000
-7d40: c0f6c2f8 00000000 00000000 c05a1f2c ee28b800 c0ffe164 c0ffe168 c0530874
-7d60: 00000000 ee8a7d98 c0530a04 00000001 c0ffe140 00000000 00000000 c052ee8c
-7d80: ee9f1170 ee2605b8 ee28b800 ee28b834 c0f72e34 c05305ac ee28b800 00000001
-7da0: 00000000 ee28b800 ee28b800 c0f72e34 ee03a000 c052fbf0 ee28b800 00000000
-7dc0: ee28b808 c052e234 ee28b800 c05a4e98 00000000 ee28b800 ee28b800 ee03a000
-7de0: 00000000 eea8be10 eefe8004 00000001 00000000 c05a1d80 002dc6c0 ee03a000
-7e00: eefe7fb4 00000000 ee28b800 c05a3d20 00000000 014000c0 00000000 c05a370c
+7c40: c0e90cd0 c023b458 40002800 00000540 eef94cd0 c023d8bc 002dc6c0 ee8a7bf0
+7c60: ee8a7bf0 00000000 c06e6190 005c5180 3b9aca00 000f4240 00000000 ee8a7ca8
+7c80: 00000001 00000501 c0554d48 c098f428 00000000 ee28ca80 a0000013 c06e6190
+7ca0: ee28cac0 ee270e50 ee28cac0 ee28b800 ee28cac0 eefe7fb4 00000000 c0554d48
+7cc0: 00000000 c06e60ec 0000400b ee270e50 ee28cac0 ee28b800 0000000c eefe7fb4
+7ce0: c0fecebc c06e6508 00000000 ee270e50 ee28b800 00000000 00000000 eefe7fb4
+7d00: c0f6c308 c05547ec ee8a7d14 ee28b800 00000000 00000001 ee28b800 ee270e50
+7d20: ee28cb50 c0554b9c 00000000 00000000 00000000 000007d0 ee28b800 00000000
+7d40: c0f6c2f8 c0ffe168 00000000 c05a1dac ee28b800 c0ffe164 00000000 c0530730
+7d60: 00000000 ee8a7d98 c05308dc 00000001 c0ffe140 00000000 00000000 c052ed38
+7d80: ee9f1170 ee2605b8 ee28b800 ee28b834 c0f72e34 c0530458 ee28b800 00000001
+7da0: 00000000 ee28b800 ee28b800 c0f72e34 ee03a000 c052fa9c ee28b800 00000000
+7dc0: ee28b808 c052e0e0 ee28b800 c05a4d18 00000000 ee28b800 ee28b800 ee03a000
+7de0: 00000000 eea8be10 eefe8004 00000001 00000000 c05a1c00 002dc6c0 ee03a000
+7e00: eefe7fb4 00000000 ee28b800 c05a3ba0 00000000 014000c0 00000000 c05a358c
 7e20: 00000063 002dc6c0 ee03a000 ee28c610 eea8be00 eea8be10 40000000 00000153
-7e40: 00000000 c05a4244 eefe7d0c ee03a350 ee03a000 eea8be00 eea8be10 c05a4dd0
+7e40: 00000000 c05a40c4 eefe7d0c ee03a350 ee03a000 eea8be00 eea8be10 c05a4c50
 7e60: 00000000 ee03a350 ffffffed eea8be10 fffffdfb c0f73790 00000000 00000000
-7e80: c0f73790 c0532170 c0532120 eea8be10 c0ffe164 c0ffe168 00000000 c0530874
-7ea0: eea8be10 c0f73790 eea8be44 00000000 0000010e c0e6a83c c0e00594 c05309cc
-7ec0: 00000000 c0f73790 c0530920 c052ef28 ee8cc55c eea14934 c0f73790 ee287e80
-7ee0: c0f6a8f8 c052fdc4 c0c21a48 c0f73790 00000006 c0f73790 00000006 c0e386a0
-7f00: 00000000 c053154c c0531dc4 c0e83328 00000006 c0101b8c 00000000 c0cc0100
-7f20: 00000100 efffcc45 c0cc0100 0000010e efffcc53 c013e858 c0cbebe8 00000000
+7e80: c0f73790 c0532048 c0531ff8 eea8be10 c0ffe164 00000000 c0ffe168 c0530730
+7ea0: eea8be10 c0f73790 eea8be44 00000000 0000010e c0e6a83c c0e00594 c05308a4
+7ec0: 00000000 c0f73790 c05307f8 c052edd4 ee8cc55c eea14934 c0f73790 ee287e80
+7ee0: c0f6a8f8 c052fc70 c0c21aa0 c0f73790 00000006 c0f73790 00000006 c0e386a0
+7f00: 00000000 c0531424 c0531c9c c0e83328 00000006 c0101b8c 00000000 c0cc0130
+7f20: 00000100 efffcc45 c0cc0130 0000010e efffcc53 c013e8c8 c0cbec18 00000000
 7f40: 00000006 00000006 efffcc45 efffcc4a 00000000 efffcbc0 00000006 c0e6a82c
 7f60: c0e83328 00000006 c0e6a830 c0fc2840 0000010e c0e00d94 00000006 00000006
-7f80: 00000000 c0e00594 00000000 c0988868 00000000 00000000 00000000 00000000
-7fa0: 00000000 c0988870 00000000 c0107cf0 00000000 00000000 00000000 00000000
+7f80: 00000000 c0e00594 00000000 c0988748 00000000 00000000 00000000 00000000
+7fa0: 00000000 c0988750 00000000 c0107cf0 00000000 00000000 00000000 00000000
 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
-[<c06e64d4>] (cros_ec_prepare_tx) from [<c0554dc8>] (cros_ec_pkt_xfer_spi+0x18/0x474)
-[<c0554dc8>] (cros_ec_pkt_xfer_spi) from [<c06e6260>] (send_command+0x20/0xd8)
-[<c06e6260>] (send_command) from [<c06e667c>] (cros_ec_query_all+0x1a4/0x398)
-[<c06e667c>] (cros_ec_query_all) from [<c0554854>] (cros_ec_register+0x94/0x21c)
-[<c0554854>] (cros_ec_register) from [<c0554c04>] (cros_ec_spi_probe+0x108/0x150)
-[<c0554c04>] (cros_ec_spi_probe) from [<c05a1f2c>] (spi_drv_probe+0x7c/0xa8)
-[<c05a1f2c>] (spi_drv_probe) from [<c0530874>] (driver_probe_device+0x240/0x2ec)
-[<c0530874>] (driver_probe_device) from [<c052ee8c>] (bus_for_each_drv+0x44/0x8c)
-[<c052ee8c>] (bus_for_each_drv) from [<c05305ac>] (__device_attach+0x9c/0x100)
-[<c05305ac>] (__device_attach) from [<c052fbf0>] (bus_probe_device+0x84/0x8c)
-[<c052fbf0>] (bus_probe_device) from [<c052e234>] (device_add+0x380/0x528)
-[<c052e234>] (device_add) from [<c05a1d80>] (spi_add_device+0x88/0x130)
-[<c05a1d80>] (spi_add_device) from [<c05a3d20>] (spi_register_controller+0x428/0x918)
-[<c05a3d20>] (spi_register_controller) from [<c05a4244>] (devm_spi_register_controller+0x34/0x70)
-[<c05a4244>] (devm_spi_register_controller) from [<c05a4dd0>] (tegra_spi_probe+0x298/0x35c)
-[<c05a4dd0>] (tegra_spi_probe) from [<c0532170>] (platform_drv_probe+0x50/0xb0)
-[<c0532170>] (platform_drv_probe) from [<c0530874>] (driver_probe_device+0x240/0x2ec)
-[<c0530874>] (driver_probe_device) from [<c05309cc>] (__driver_attach+0xac/0xb0)
-[<c05309cc>] (__driver_attach) from [<c052ef28>] (bus_for_each_dev+0x54/0x88)
-[<c052ef28>] (bus_for_each_dev) from [<c052fdc4>] (bus_add_driver+0xe4/0x1f0)
-[<c052fdc4>] (bus_add_driver) from [<c053154c>] (driver_register+0x78/0xf4)
-[<c053154c>] (driver_register) from [<c0101b8c>] (do_one_initcall+0x3c/0x168)
+[<c06e6360>] (cros_ec_prepare_tx) from [<c0554d60>] (cros_ec_pkt_xfer_spi+0x18/0x474)
+[<c0554d60>] (cros_ec_pkt_xfer_spi) from [<c06e60ec>] (send_command+0x20/0xd8)
+[<c06e60ec>] (send_command) from [<c06e6508>] (cros_ec_query_all+0x1a4/0x398)
+[<c06e6508>] (cros_ec_query_all) from [<c05547ec>] (cros_ec_register+0x94/0x21c)
+[<c05547ec>] (cros_ec_register) from [<c0554b9c>] (cros_ec_spi_probe+0x108/0x150)
+[<c0554b9c>] (cros_ec_spi_probe) from [<c05a1dac>] (spi_drv_probe+0x7c/0xa8)
+[<c05a1dac>] (spi_drv_probe) from [<c0530730>] (driver_probe_device+0x250/0x318)
+[<c0530730>] (driver_probe_device) from [<c052ed38>] (bus_for_each_drv+0x44/0x8c)
+[<c052ed38>] (bus_for_each_drv) from [<c0530458>] (__device_attach+0x9c/0x100)
+[<c0530458>] (__device_attach) from [<c052fa9c>] (bus_probe_device+0x84/0x8c)
+[<c052fa9c>] (bus_probe_device) from [<c052e0e0>] (device_add+0x380/0x528)
+[<c052e0e0>] (device_add) from [<c05a1c00>] (spi_add_device+0x88/0x130)
+[<c05a1c00>] (spi_add_device) from [<c05a3ba0>] (spi_register_controller+0x428/0x918)
+[<c05a3ba0>] (spi_register_controller) from [<c05a40c4>] (devm_spi_register_controller+0x34/0x70)
+[<c05a40c4>] (devm_spi_register_controller) from [<c05a4c50>] (tegra_spi_probe+0x298/0x35c)
+[<c05a4c50>] (tegra_spi_probe) from [<c0532048>] (platform_drv_probe+0x50/0xb0)
+[<c0532048>] (platform_drv_probe) from [<c0530730>] (driver_probe_device+0x250/0x318)
+[<c0530730>] (driver_probe_device) from [<c05308a4>] (__driver_attach+0xac/0xb0)
+[<c05308a4>] (__driver_attach) from [<c052edd4>] (bus_for_each_dev+0x54/0x88)
+[<c052edd4>] (bus_for_each_dev) from [<c052fc70>] (bus_add_driver+0xe4/0x1f0)
+[<c052fc70>] (bus_add_driver) from [<c0531424>] (driver_register+0x78/0xf4)
+[<c0531424>] (driver_register) from [<c0101b8c>] (do_one_initcall+0x3c/0x168)
 [<c0101b8c>] (do_one_initcall) from [<c0e00d94>] (kernel_init_freeable+0x10c/0x1d0)
-[<c0e00d94>] (kernel_init_freeable) from [<c0988870>] (kernel_init+0x8/0x114)
-[<c0988870>] (kernel_init) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
+[<c0e00d94>] (kernel_init_freeable) from [<c0988750>] (kernel_init+0x8/0x114)
+[<c0988750>] (kernel_init) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
 Code: e2800008 e8bd8070 e7f001f2 e7f001f2 (e7f001f2) 
----[ end trace ac772a5ddafa52cb ]---
+---[ end trace 8cf7087b88cef7da ]---
 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
 
 CPU3: stopping
-CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D          4.14.0-rc8-next-20171108-213792-g536f8ff #1
+CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974f3c>] (dump_stack+0x84/0xa4)
-[<c0974f3c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
+[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
+[<c0974e1c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
 [<c010f5e0>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
 [<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
 Exception stack(0xee8e3f70 to 0xee8e3fb8)
-3f60:                                     00000001 00000000 ee8e3fc8 c011a360
+3f60:                                     00000001 00000000 ee8e3fc8 c011a380
 3f80: 00000008 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
-3fa0: 00000002 ee8e3fc0 c0108758 c010875c 60000013 ffffffff
+3fa0: c06cf2a4 ee8e3fc0 c0108758 c010875c 60000013 ffffffff
 [<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
-[<c010875c>] (arch_cpu_idle) from [<c0162548>] (do_idle+0x140/0x204)
-[<c0162548>] (do_idle) from [<c0162894>] (cpu_startup_entry+0x18/0x1c)
-[<c0162894>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
-CPU2: stopping
-CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D          4.14.0-rc8-next-20171108-213792-g536f8ff #1
+[<c010875c>] (arch_cpu_idle) from [<c0162554>] (do_idle+0x140/0x204)
+[<c0162554>] (do_idle) from [<c01628a0>] (cpu_startup_entry+0x18/0x1c)
+[<c01628a0>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+CPU1: stopping
+CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974f3c>] (dump_stack+0x84/0xa4)
-[<c0974f3c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
+[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
+[<c0974e1c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
 [<c010f5e0>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
 [<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
-Exception stack(0xee8e1f70 to 0xee8e1fb8)
-1f60:                                     00000001 00000000 ee8e1fc8 c011a360
-1f80: 00000004 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
-1fa0: 00000002 ee8e1fc0 c0108758 c010875c 60000013 ffffffff
+Exception stack(0xee8c1f70 to 0xee8c1fb8)
+1f60:                                     00000001 00000000 ee8c1fc8 c011a380
+1f80: 00000002 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
+1fa0: c06cf2a4 ee8c1fc0 c0108758 c010875c 60000013 ffffffff
 [<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
-[<c010875c>] (arch_cpu_idle) from [<c0162548>] (do_idle+0x140/0x204)
-[<c0162548>] (do_idle) from [<c0162894>] (cpu_startup_entry+0x18/0x1c)
-[<c0162894>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
-CPU1: stopping
-CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D          4.14.0-rc8-next-20171108-213792-g536f8ff #1
+[<c010875c>] (arch_cpu_idle) from [<c0162554>] (do_idle+0x140/0x204)
+[<c0162554>] (do_idle) from [<c01628a0>] (cpu_startup_entry+0x18/0x1c)
+[<c01628a0>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+CPU2: stopping
+CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974f3c>] (dump_stack+0x84/0xa4)
-[<c0974f3c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
+[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
+[<c0974e1c>] (dump_stack) from [<c010f5e0>] (handle_IPI+0x18c/0x32c)
 [<c010f5e0>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
 [<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
-Exception stack(0xee8c1f70 to 0xee8c1fb8)
-1f60:                                     00000001 00000000 ee8c1fc8 c011a360
-1f80: 00000002 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
-1fa0: c06cf418 ee8c1fc0 c0108758 c010875c 60000013 ffffffff
+Exception stack(0xee8e1f70 to 0xee8e1fb8)
+1f60:                                     00000001 00000000 ee8e1fc8 c011a380
+1f80: 00000004 c0f04ccc 00000000 c0f04c68 00000000 c0e8c2b8 00000000 c0f04cd8
+1fa0: 00000002 ee8e1fc0 c0108758 c010875c 60000013 ffffffff
 [<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
-[<c010875c>] (arch_cpu_idle) from [<c0162548>] (do_idle+0x140/0x204)
-[<c0162548>] (do_idle) from [<c0162894>] (cpu_startup_entry+0x18/0x1c)
-[<c0162894>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+[<c010875c>] (arch_cpu_idle) from [<c0162554>] (do_idle+0x140/0x204)
+[<c0162554>] (do_idle) from [<c01628a0>] (cpu_startup_entry+0x18/0x1c)
+[<c01628a0>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
 ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
 
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 8 at kernel/irq_work.c:68 irq_work_queue_on+0xbc/0xfc
 Modules linked in:
-CPU: 0 PID: 8 Comm: rcu_preempt Tainted: G      D          4.14.0-rc8-next-20171108-213792-g536f8ff #1
+CPU: 0 PID: 8 Comm: rcu_preempt Tainted: G      D          4.14.0-rc8-next-20171109-214194-g5515cf1 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 [<c0111088>] (unwind_backtrace) from [<c010c074>] (show_stack+0x10/0x14)
-[<c010c074>] (show_stack) from [<c0974f3c>] (dump_stack+0x84/0xa4)
-[<c0974f3c>] (dump_stack) from [<c01219e4>] (__warn+0xd8/0x104)
-[<c01219e4>] (__warn) from [<c0121a30>] (warn_slowpath_null+0x20/0x28)
-[<c0121a30>] (warn_slowpath_null) from [<c01d68c8>] (irq_work_queue_on+0xbc/0xfc)
-[<c01d68c8>] (irq_work_queue_on) from [<c0183d4c>] (rcu_implicit_dynticks_qs+0x280/0x2a0)
-[<c0183d4c>] (rcu_implicit_dynticks_qs) from [<c01824bc>] (force_qs_rnp+0x138/0x1d8)
-[<c01824bc>] (force_qs_rnp) from [<c0182ae4>] (rcu_gp_kthread+0x588/0xa50)
-[<c0182ae4>] (rcu_gp_kthread) from [<c013f100>] (kthread+0x11c/0x154)
-[<c013f100>] (kthread) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
----[ end trace ac772a5ddafa52cc ]---
+[<c010c074>] (show_stack) from [<c0974e1c>] (dump_stack+0x84/0xa4)
+[<c0974e1c>] (dump_stack) from [<c0121a24>] (__warn+0xd8/0x104)
+[<c0121a24>] (__warn) from [<c0121a70>] (warn_slowpath_null+0x20/0x28)
+[<c0121a70>] (warn_slowpath_null) from [<c01d68d4>] (irq_work_queue_on+0xbc/0xfc)
+[<c01d68d4>] (irq_work_queue_on) from [<c0183d58>] (rcu_implicit_dynticks_qs+0x280/0x2a0)
+[<c0183d58>] (rcu_implicit_dynticks_qs) from [<c01824c8>] (force_qs_rnp+0x138/0x1d8)
+[<c01824c8>] (force_qs_rnp) from [<c0182af0>] (rcu_gp_kthread+0x588/0xa50)
+[<c0182af0>] (rcu_gp_kthread) from [<c013f170>] (kthread+0x11c/0x154)
+[<c013f170>] (kthread) from [<c0107cf0>] (ret_from_fork+0x14/0x24)
+---[ end trace 8cf7087b88cef7db ]---
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.012067388 -0800
+++ /tmp/foob	2017-11-08 22:57:32.016067406 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801690 us
+Bootloader-Cpu Init at (time stamp): 1801567 us
 
 Pinmux changes applied in kernel way
 
@@ -62,17 +62,252 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801664  us
-Bootloader (AosInit) time: 733425 us
-Bootloader Main Init time: 180286 us
-BlockDevMgrInit time: 157497 us
+Miscellaneous avp time: 1801541  us
+Bootloader (AosInit) time: 733482 us
+Bootloader Main Init time: 180213 us
+BlockDevMgrInit time: 157549 us
 PartMgrInit time: 8 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 77058 us 
-Display init time: 574605 us
+Partition Table load: 77013 us 
+Display init time: 574554 us
 Kernel read time: 1366 msec
 Load Kernel Size:   18094080 Bytes
 Bl Kernel ReadSpeed: 13246000 Bytes/sec
-Pre-Kernel Jump time: 3886313 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 8870303 us
+Pre-Kernel Jump time: 3886661 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 8870645 us
+Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
+Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
+Machine model: NVIDIA Tegra132 Norrin
+Memory limited to 1734MB
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 16 MiB at 0x00000000eb400000
+NUMA: No NUMA configuration found
+NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ec5fffff]
+NUMA: NODE_DATA [mem 0xec5c7b00-0xec5c95ff]
+Zone ranges:
+  DMA      [mem 0x0000000080000000-0x00000000ec5fffff]
+  Normal   empty
+Movable zone start for each node
+Early memory node ranges
+  node   0: [mem 0x0000000080000000-0x00000000ec5fffff]
+Initmem setup node 0 [mem 0x0000000080000000-0x00000000ec5fffff]
+/cpus/cpu@1: missing enable-method property
+random: fast init done
+percpu: Embedded 23 pages/cpu @ffff80006c5a7000 s55936 r8192 d30080 u94208
+Detected PIPT I-cache on CPU0
+Built 1 zonelists, mobility grouping on.  Total pages: 436968
+Policy zone: DMA
+Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
+Memory: 1707988K/1775616K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 51244K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
+    .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
+      .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
+       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0001b18000   (    27 MB actual)
+    memory  : 0xffff800000000000 - 0xffff80006c600000   (  1734 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
+Preemptible hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
+	Tasks RCU enabled.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
+NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+Tegra clk 127: register failed with -17
+arch_timer: cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Console: colour dummy device 80x25
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=48000)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
+Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
+Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
+Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
+ASID allocator initialised with 256 entries
+Hierarchical SRCU implementation.
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+smp: Brought up 1 node, 1 CPU
+SMP: Total of 1 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
+CPU: All CPU(s) started at EL1
+devtmpfs: initialized
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+futex hash table entries: 256 (order: 3, 32768 bytes)
+pinctrl core: initialized pinctrl subsystem
+DMI not present or invalid.
+NET: Registered protocol family 16
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
+cpuidle: using governor menu
+vdso: 2 pages (1 code @ ffff0000089b6000, 1 data @ ffff000008f65000)
+hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+DMA: preallocated 256 KiB pool for atomic allocations
+Serial: AMBA PL011 UART driver
+HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
++VDD_LED: Failed to request enable GPIO122: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
++5V_USB_HS: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517
++5V_USB_SS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
++1.05V_RUN_AVDD_HDMI_PLL_AP_GATE: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@9: Failed to register regulator: -517
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@10: Failed to register regulator: -517
++5V_VDD_TS: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+clocksource: Switched to clocksource arch_sys_counter
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
+NET: Registered protocol family 2
+TCP established hash table entries: 16384 (order: 5, 131072 bytes)
+TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
+TCP: Hash tables configured (established 16384 bind 16384)
+UDP hash table entries: 1024 (order: 3, 32768 bytes)
+UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+Unpacking initramfs...
+Freeing initrd memory: 1284K
+kvm [1]: HYP mode not available
+Initialise system trusted keyrings
+workingset: timestamp_bits=44 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+9p: Installing v9fs 9p2000 file system support
+Key type asymmetric registered
+Asymmetric key parser 'x509' registered
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
+io scheduler noop registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-xusb-padctl 7009f000.padctl: deprecated DT, using legacy driver
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 317, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+thunder-xcv, ver 1.0
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+usbcore: registered new interface driver usb-storage
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+cpu cpu0: cpu0 supply vdd-cpu not found, using dummy regulator
+cpufreq-tegra124: probe of cpufreq-tegra124 failed with error -22
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+Loading compiled-in X.509 certificates
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
++VDD_LED: supplied by +VDD_MUX
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
++5V_USB_HS: supplied by +5V_SYS
++5V_USB_SS: supplied by +5V_SYS
++5V_HDMI_CON: supplied by +5V_SYS
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+hctosys: unable to open rtc device (rtc0)
++3.3V_AVDD_HDMI_AP_GATED: disabling
++VDD_LED: disabling
++5V_USB_HS: disabling
++5V_USB_SS: disabling
++1.05V_RUN_AVDD_HDMI_PLL_AP_GATE: disabling
++5V_HDMI_CON: disabling
+ALSA device list:
+  No soundcards found.
+Freeing unused kernel memory: 1088K
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+
+System initialization...
+
+Mounting /proc :[SUCCESS]
+Mounting /sys :[SUCCESS]
+Mounting /dev :[SUCCESS]
+Mounting /dev/pts :[SUCCESS]
+Mounting /sys/kernel/debug :[SUCCESS]
+Mounting other filesystems :[SUCCESS]
+Enabling hot-plug :[SUCCESS]
+Populating /dev :[SUCCESS]
+Starting syslogd :[SUCCESS]
+Starting telnetd :[SUCCESS]
+
+System initialization complete.
+
+Please press Enter to activate this console. 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.020067424 -0800
+++ /tmp/foob	2017-11-08 22:57:32.024067443 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 908.2 KiB/s
+	 918.9 KiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -57,7 +57,7 @@
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 826.2 KiB/s
+	 860.4 KiB/s
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Nov 7 23:03:49 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c1680380, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c1680280, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -102,8 +102,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690374   (1601 kB)
-       .bss : 0xc1690374 - 0xc16f5734   ( 405 kB)
+      .data : 0xc1500000 - 0xc1690280   (1601 kB)
+       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -331,7 +331,6 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 NET: Registered protocol family 10
-hub 1-0:1.0: activate --> -22
 Segment Routing with IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
@@ -343,21 +342,22 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
+hub 1-0:1.0: activate --> -22
 Loading compiled-in X.509 certificates
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-hub 1-0:1.0: activate --> -22
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+hub 1-0:1.0: activate --> -22
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 hub 2-0:1.0: config failed, can't get hub status (err 2)
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-hub 1-0:1.0: activate --> -22
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 Waiting for root device PARTUUID=11eb23c1-01...
 mmc1: new high speed SD card at address b368
+hub 1-0:1.0: activate --> -22
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
  mmcblk1: p1 p2
 hub 1-0:1.0: activate --> -22
@@ -376,9 +376,9 @@
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
+hub 1-0:1.0: activate --> -22
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
@@ -393,9 +393,9 @@
 hub 1-0:1.0: activate --> -22
 EXT4-fs (mmcblk0p1): recovery complete
 hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
+hub 1-0:1.0: activate --> -22
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
 hub 1-0:1.0: activate --> -22
@@ -405,8 +405,7 @@
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 hub 1-0:1.0: activate --> -22
-hub 1-0:1.0: activate --> -22
-root@(none):/# [    4.356745] hub 1-0:1.0: activate --> -22
+root@(none):/# [    4.316971] hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
@@ -508,8 +507,8 @@
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
  
-root@(none):/# [   10.416761] hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
+root@(none):/# [   10.446888] hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.028067460 -0800
+++ /tmp/foob	2017-11-08 22:57:32.032067477 -0800
@@ -46,20 +46,20 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 3.7 MiB/s
+	 905.3 KiB/s
 done
-Bytes transferred = 6326344 (608848 hex)
+Bytes transferred = 6326376 (608868 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 2.9 MiB/s
+	 898.4 KiB/s
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x608848 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x608868 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Nov 7 23:03:10 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -100,8 +100,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2828   ( 779 kB)
-       .bss : 0xc0fc2828 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
+       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 	Tasks RCU enabled.
@@ -330,13 +330,13 @@
 Bluetooth: RFCOMM socket layer initialized
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
-hub 1-0:1.0: activate --> -22
 Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+hub 1-0:1.0: activate --> -22
+Bluetooth: HIDP socket layer initialized
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
  mmcblk1: p1 p2
-Bluetooth: HIDP (Human Interface Emulation) ver 1.2
-Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
@@ -345,8 +345,8 @@
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: activate --> -22
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 hub 2-0:1.0: config failed, can't get hub status (err 2)
@@ -357,9 +357,8 @@
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 ALSA device list:
   #0: tegra-trimslice
-hub 1-0:1.0: activate --> -22
-cfg80211: failed to load regulatory.db
 Waiting for root device PARTUUID=11eb23c1-01...
+cfg80211: failed to load regulatory.db
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
@@ -377,16 +376,16 @@
 hub 1-0:1.0: activate --> -22
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
+hub 1-0:1.0: activate --> -22
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
-hub 1-0:1.0: activate --> -22
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 hub 1-0:1.0: activate --> -22
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
-devtmpfs: mounted
 hub 1-0:1.0: activate --> -22
+devtmpfs: mounted
 Freeing unused kernel memory: 1024K
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
@@ -396,7 +395,7 @@
 bash: no job control in this shell
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
-root@(none):/# [    3.538895] hub 1-0:1.0: activate --> -22
+root@(none):/# [    3.539498] hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
@@ -525,7 +524,7 @@
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
  
-root@(none):/# [   11.218909] hub 1-0:1.0: activate --> -22
+root@(none):/# [   11.219500] hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
 hub 1-0:1.0: activate --> -22
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.040067512 -0800
+++ /tmp/foob	2017-11-08 22:57:32.040067512 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 741906 us
-Basic modules init took 350386 us
+Tegraboot started after 825432 us
+Basic modules init took 348854 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14370 us
-Carveout took 252851 us
-CPU initialization took 92445 us
-Total time taken by TegraBoot 710052 us
+Next stage binary read took 14382 us
+Carveout took 252665 us
+CPU initialization took 92467 us
+Total time taken by TegraBoot 708368 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.583] LPDDR4 Training: Number of tables = 10
+64b[0001.662] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,7 +117,7 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-16773632 bytes read in 842 ms (19 MiB/s)
+16773632 bytes read in 841 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44764 bytes read in 453 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Nov 7 23:06:44 PST 2017
+Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -142,48 +142,220 @@
 NUMA: No NUMA configuration found
 NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
 NUMA: NODE_DATA [mem 0x13ffb6e00-0x13ffb88ff]
-Unable to handle kernel NULL pointer dereference at virtual address 00000000
-Mem abort info:
-  ESR = 0x96000004
-  Exception class = DABT (current EL), IL = 32 bits
-  SET = 0, FnV = 0
-  EA = 0, S1PTW = 0
-Data abort info:
-  ISV = 0, ISS = 0x00000004
-  CM = 0, WnR = 0
-[0000000000000000] user address but active_mm is swapper
-Internal error: Oops: 96000004 [#1] PREEMPT SMP
-Modules linked in:
-CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.0-rc8-next-20171108-213792-g536f8ff #1
-Hardware name: NVIDIA Tegra210 P2371 (P2530/P2595) reference design (DT)
-task: ffff000008f72a80 task.stack: ffff000008f60000
-pstate: 80000085 (Nzcv daIf -PAN -UAO)
-pc : memory_present+0x68/0xf4
-lr : memory_present+0x34/0xf4
-sp : ffff000008f63e80
-x29: ffff000008f63e80 x28: 0000000080e50018 
-x27: 0000000000000000 x26: 0000000000000004 
-x25: 0000000000000002 x24: 0000000000000000 
-x23: 0000000000000000 x22: ffff0000090b7000 
-x21: 0000000000000000 x20: ffff0000090b7000 
-x19: 0000000000080000 x18: ffff0000090b3bc0 
-x17: 0000000000000007 x16: 0000000000000001 
-x15: 0000000100000000 x14: 000000000003b6e4 
-x13: 000000013ffb8918 x12: 0000000000000001 
-x11: 000000000000000b x10: ffff000008f8c858 
-x9 : 0000000000000000 x8 : ffff8000bffb8900 
-x7 : 0000000000000000 x6 : 0000000000000000 
-x5 : fffffffffffffffe x4 : ffffffffffffffff 
-x3 : 0000001000000000 x2 : 00000000000ff200 
-x1 : 0000000000000004 x0 : 0000000000000000 
-Process swapper (pid: 0, stack limit = 0xffff000008f60000)
-Call trace:
- memory_present+0x68/0xf4
- bootmem_init+0x90/0x11c
- setup_arch+0x19c/0x4ec
- start_kernel+0x64/0x3ac
-Code: d35afe78 f941be80 d37df318 d352fe79 (f8786800) 
-random: get_random_bytes called from print_oops_end_marker+0x48/0x64 with crng_init=0
----[ end trace 0000000000000000 ]---
-Kernel panic - not syncing: Attempted to kill the idle task!
----[ end Kernel panic - not syncing: Attempted to kill the idle task!
+Zone ranges:
+  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
+  Normal   [mem 0x0000000100000000-0x000000013fffffff]
+Movable zone start for each node
+Early memory node ranges
+  node   0: [mem 0x0000000080000000-0x00000000ff1fffff]
+  node   0: [mem 0x0000000100000000-0x000000013fffffff]
+Initmem setup node 0 [mem 0x0000000080000000-0x000000013fffffff]
+On node 0 totalpages: 782848
+  DMA zone: 8192 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 520704 pages, LIFO batch:31
+  Normal zone: 4096 pages used for memmap
+  Normal zone: 262144 pages, LIFO batch:31
+psci: probing for conduit method from DT.
+psci: PSCIv0.2 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: MIGRATE_INFO_TYPE not supported.
+random: fast init done
+percpu: Embedded 23 pages/cpu @ffff8000bff53000 s55936 r8192 d30080 u94208
+pcpu-alloc: s55936 r8192 d30080 u94208 alloc=23*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists, mobility grouping on.  Total pages: 770560
+Policy zone: Normal
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
+software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
+Memory: 2982368K/3131392K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 132640K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
+    .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
+      .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
+       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
+    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Preemptible hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
+	Tasks RCU enabled.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+GIC: Using split EOI/Deactivate mode
+/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000
+boot misc1 0x0: expected 0x20
+ (comparison mask = 0xffffff)
+PLL_X already enabled. Postponing set full defaults
+arch_timer: cp15 timer(s) running at 19.20MHz (phys).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
+sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
+Console: colour dummy device 80x25
+Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
+ASID allocator initialised with 65536 entries
+Hierarchical SRCU implementation.
+Speedo Revision 4
+Tegra Revision: A01 SKU: 1 CPU Process: -22 SoC Process: -22
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+Detected PIPT I-cache on CPU1
+CPU1: Booted secondary processor 0x0000000001 [0x411fd071]
+Detected PIPT I-cache on CPU2
+CPU2: Booted secondary processor 0x0000000002 [0x411fd071]
+Detected PIPT I-cache on CPU3
+CPU3: Booted secondary processor 0x0000000003 [0x411fd071]
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
+CPU: All CPU(s) started at EL2
+alternatives: patching kernel code
+devtmpfs: initialized
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+futex hash table entries: 1024 (order: 5, 131072 bytes)
+pinctrl core: initialized pinctrl subsystem
+DMI not present or invalid.
+NET: Registered protocol family 16
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
+cpuidle: using governor menu
+vdso: 2 pages (1 code @ ffff0000089b6000, 1 data @ ffff000008f65000)
+hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+DMA: preallocated 256 KiB pool for atomic allocations
+Serial: AMBA PL011 UART driver
+HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+clocksource: Switched to clocksource arch_sys_counter
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
+NET: Registered protocol family 2
+TCP established hash table entries: 32768 (order: 6, 262144 bytes)
+TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
+TCP: Hash tables configured (established 32768 bind 32768)
+UDP hash table entries: 2048 (order: 4, 65536 bytes)
+UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 128
+kvm [1]: 8-bit VMID
+kvm [1]: IDMAP page: 8099b000
+kvm [1]: HYP VA range: 800000000000:ffffffffffff
+kvm [1]: vgic-v2@50044000
+kvm [1]: vgic interrupt IRQ1
+kvm [1]: virtual timer IRQ4
+kvm [1]: Hyp mode initialized successfully
+Initialise system trusted keyrings
+workingset: timestamp_bits=44 max_order=20 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+9p: Installing v9fs 9p2000 file system support
+Key type asymmetric registered
+Asymmetric key parser 'x509' registered
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
+io scheduler noop registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 313, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [uart8250] disabled
+bootconsole [uart8250] disabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+thunder-xcv, ver 1.0
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+usbcore: registered new interface driver usb-storage
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+Loading compiled-in X.509 certificates
+hctosys: unable to open rtc device (rtc0)
+ALSA device list:
+  No soundcards found.
+Waiting for root device PARTUUID=00000000-0001-0000-788f-a75600000000...
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB, chardev (240:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
+EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 1088K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.044067531 -0800
+++ /tmp/foob	2017-11-08 22:57:32.048067548 -0800
@@ -0,0 +1,298 @@
+Booting Linux on physical CPU 0x0000000000 [0x411fd071]
+Linux version 4.14.0-rc8-next-20171109-332435-g5515cf16e270 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Wed Nov 8 22:50:34 PST 2017
+Machine model: Google Pixel C
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 16 MiB at 0x00000000f5400000
+earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
+bootconsole [uart0] enabled
+NUMA: No NUMA configuration found
+NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
+NUMA: NODE_DATA [mem 0x13fface80-0x13ffae97f]
+Zone ranges:
+  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
+  Normal   [mem 0x0000000100000000-0x000000013fffffff]
+Movable zone start for each node
+Early memory node ranges
+  node   0: [mem 0x0000000080000000-0x00000000f65fffff]
+  node   0: [mem 0x0000000100000000-0x000000013fffffff]
+Initmem setup node 0 [mem 0x0000000080000000-0x000000013fffffff]
+Reserved but unavailable: 39424 pages
+psci: probing for conduit method from DT.
+psci: PSCIv1.0 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
+percpu: Embedded 23 pages/cpu @ffff8000bff49000 s55936 r8192 d30080 u94208
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists, mobility grouping on.  Total pages: 735336
+Policy zone: Normal
+Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
+software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
+Memory: 2837644K/2988032K available (9404K kernel code, 1148K rwdata, 4716K rodata, 1088K init, 395K bss, 134004K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
+    .rodata : 0xffff0000089b0000 - 0xffff000008e50000   (  4736 KB)
+      .init : 0xffff000008e50000 - 0xffff000008f60000   (  1088 KB)
+      .data : 0xffff000008f60000 - 0xffff00000907f200   (  1149 KB)
+       .bss : 0xffff00000907f200 - 0xffff0000090e1f60   (   396 KB)
+    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
+    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Preemptible hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
+	Tasks RCU enabled.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+GIC: Using split EOI/Deactivate mode
+/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000
+boot misc0 0x0: expected 0x80000
+ (comparison mask = 0x400ffffb)
+boot misc2 0x1f720005: expected 0x1f720f05
+ (comparison mask = 0xffffff17)
+PLL_C already enabled. Postponing set full defaults
+boot misc0 0x0: expected 0x20
+ (comparison mask = 0x7ffffff)
+boot misc1 0x10000000: expected 0xc0000000
+ (comparison mask = 0xf8000000)
+boot misc2 0x0: expected 0xf400f0da
+ (comparison mask = 0xffffffff)
+boot misc3 0x0: expected 0x2004f400
+ (comparison mask = 0xffffffff)
+PLL_DP already enabled. Postponing set full defaults
+boot misc1 0x0: expected 0x20
+ (comparison mask = 0xffffff)
+PLL_X already enabled. Postponing set full defaults
+arch_timer: cp15 timer(s) running at 19.20MHz (phys).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
+sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
+Console: colour dummy device 80x25
+console [tty0] enabled
+bootconsole [uart0] disabled
+Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
+ASID allocator initialised with 65536 entries
+Hierarchical SRCU implementation.
+Speedo Revision 4
+random: fast init done
+Tegra Revision: A02 SKU: 19 CPU Process: 0 SoC Process: 0
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+Detected PIPT I-cache on CPU1
+CPU1: Booted secondary processor 0x0000000001 [0x411fd071]
+Detected PIPT I-cache on CPU2
+CPU2: Booted secondary processor 0x0000000002 [0x411fd071]
+Detected PIPT I-cache on CPU3
+CPU3: Booted secondary processor 0x0000000003 [0x411fd071]
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
+CPU: All CPU(s) started at EL2
+alternatives: patching kernel code
+devtmpfs: initialized
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+futex hash table entries: 1024 (order: 5, 131072 bytes)
+pinctrl core: initialized pinctrl subsystem
+DMI not present or invalid.
+NET: Registered protocol family 16
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
+cpuidle: using governor menu
+vdso: 2 pages (1 code @ ffff0000089b6000, 1 data @ ffff000008f65000)
+hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+DMA: preallocated 256 KiB pool for atomic allocations
+Serial: AMBA PL011 UART driver
+HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
+PPLCD_VDD: Failed to request enable GPIO172: -517
+reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
+PP1800_LCDIO: Failed to request enable GPIO171: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+PP1800_CAM: Failed to request enable GPIO83: -517
+reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+clocksource: Switched to clocksource arch_sys_counter
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
+NET: Registered protocol family 2
+TCP established hash table entries: 32768 (order: 6, 262144 bytes)
+TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
+TCP: Hash tables configured (established 32768 bind 32768)
+UDP hash table entries: 2048 (order: 4, 65536 bytes)
+UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+Unpacking initramfs...
+Freeing initrd memory: 1280K
+kvm [1]: 8-bit VMID
+kvm [1]: IDMAP page: 8099b000
+kvm [1]: HYP VA range: 800000000000:ffffffffffff
+kvm [1]: vgic-v2@50044000
+kvm [1]: vgic interrupt IRQ1
+kvm [1]: virtual timer IRQ4
+kvm [1]: Hyp mode initialized successfully
+Initialise system trusted keyrings
+workingset: timestamp_bits=44 max_order=20 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+9p: Installing v9fs 9p2000 file system support
+Key type asymmetric registered
+Asymmetric key parser 'x509' registered
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
+io scheduler noop registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 314, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+cros-ec-i2c 0-001e: Chrome EC device registered
+max77620 1-003c: PMIC Version OTP:0x35 and ES:0x8
+max77620-sd0: supplied by regulator-dummy
+max77620-sd1: supplied by regulator-dummy
+max77620-sd2: supplied by regulator-dummy
+max77620-sd3: supplied by regulator-dummy
+max77620-ldo0: supplied by regulator-dummy
+max77620-ldo1: supplied by regulator-dummy
+PP1200_RCAM: Bringing 1050000uV into 1200000-1200000uV
+max77620-ldo2: supplied by regulator-dummy
+max77620-ldo3: supplied by regulator-dummy
+PP2800L_RCAM: Bringing 3100000uV into 2800000-2800000uV
+max77620-ldo4: supplied by regulator-dummy
+PP1100_SOC_RTC: Bringing 1000000uV into 850000-850000uV
+max77620-ldo5: supplied by regulator-dummy
+PP2800L_FCAM: Bringing 3100000uV into 2800000-2800000uV
+max77620-ldo6: supplied by regulator-dummy
+PP_LDO6: Bringing 2800000uV into 1800000-1800000uV
+max77620-ldo7: supplied by regulator-dummy
+max77620-ldo8: supplied by regulator-dummy
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+thunder-xcv, ver 1.0
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+tegra-xusb 70090000.usb: Firmware timestamp: 2015-08-10 09:47:54 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 320, io mem 0x70090000
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 5 ports detected
+hub 1-0:1.0: config failed, can't get hub status (err 2)
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2
+usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 4 ports detected
+hub 2-0:1.0: config failed, can't get hub status (err 2)
+usbcore: registered new interface driver usb-storage
+max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+Loading compiled-in X.509 certificates
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
+mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+max77686-rtc max77620-rtc: setting system clock to 2001-08-20 12:19:18 UTC (998309958)
+PP1200_AVDD: disabling
+PP1200_RCAM: disabling
+PP2800L_RCAM: disabling
+PP2800L_FCAM: disabling
+PP_LDO6: disabling
+PPLCD_VDD: disabling
+PP1800_LCDIO: disabling
+PP1800_CAM: disabling
+ALSA device list:
+  No soundcards found.
+Freeing unused kernel memory: 1088K
+
+System initialization...
+
+Mounting /proc :[SUCCESS]
+Mounting /sys :[SUCCESS]
+Mounting /dev :[SUCCESS]
+Mounting /dev/pts :[SUCCESS]
+Mounting /sys/kernel/debug :[SUCCESS]
+Mounting other filesystems :[SUCCESS]
+Enabling hot-plug :[SUCCESS]
+Populating /dev :[SUCCESS]
+Starting syslogd :[SUCCESS]
+Starting telnetd :[SUCCESS]
+
+System initialization complete.
+
+Please press Enter to activate this console. 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.052067565 -0800
+++ /tmp/foob	2017-11-08 22:57:32.056067583 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ########################################
-	 2.9 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8217088 (7d6200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Nov 7 23:03:49 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Nov 8 22:47:05 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1680380, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1680280, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0e00000   (12256 kB)
       .init : 0xc1300000 - 0xc1500000   (2048 kB)
-      .data : 0xc1500000 - 0xc1690374   (1601 kB)
-       .bss : 0xc1690374 - 0xc16f5734   ( 405 kB)
+      .data : 0xc1500000 - 0xc1690280   (1601 kB)
+       .bss : 0xc1690280 - 0xc16f5634   ( 405 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-11-08 22:57:32.060067601 -0800
+++ /tmp/foob	2017-11-08 22:57:32.064067619 -0800
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #########################################
-	 2.8 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6326344 (608848 hex)
+Bytes transferred = 6326376 (608868 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x608848 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x608868 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.14.0-rc8-next-20171108-213792-g536f8ff (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Nov 7 23:03:10 PST 2017
+Linux version 4.14.0-rc8-next-20171109-214194-g5515cf1 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Wed Nov 8 22:46:51 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -92,8 +92,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2828   ( 779 kB)
-       .bss : 0xc0fc2828 - 0xc100d4b4   ( 300 kB)
+      .data : 0xc0f00000 - 0xc0fc2840   ( 779 kB)
+       .bss : 0xc0fc2840 - 0xc100d4b4   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
