U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.6 MiB/s done Bytes transferred = 8204808 (7d3208 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 822.3 KiB/s done Bytes transferred = 68203 (10a6b hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7d3200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a6a Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc4-next-20171012-205980-gdcc70ea (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Thu Oct 12 20:04:52 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c16850c0, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef83000 s39744 r8192 d21696 u69632 [ 0.000000] pcpu-alloc: s39744 r8192 d21696 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993412K/2097148K available (11264K kernel code, 1620K rwdata, 4524K rodata, 2048K init, 403K bss, 38200K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0e00000 (12256 kB) [ 0.000000] .init : 0xc1300000 - 0xc1500000 (2048 kB) [ 0.000000] .data : 0xc1500000 - 0xc1695130 (1621 kB) [ 0.000000] .bss : 0xc1695130 - 0xc16f9efc ( 404 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000017] Switching to timer-based delay loop, resolution 1000ns [ 0.001752] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001759] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001766] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001771] Switching to timer-based delay loop, resolution 83ns [ 0.001990] Console: colour dummy device 80x30 [ 0.002005] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002011] pid_max: default: 32768 minimum: 301 [ 0.002056] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002062] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002266] CPU: Testing write buffer coherency: ok [ 0.002395] /cpus/cpu@0 missing clock-frequency property [ 0.002410] /cpus/cpu@1 missing clock-frequency property [ 0.002425] /cpus/cpu@2 missing clock-frequency property [ 0.002440] /cpus/cpu@3 missing clock-frequency property [ 0.002445] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002560] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003262] Hierarchical SRCU implementation. [ 0.003943] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004208] EFI services will not be available. [ 0.004270] smp: Bringing up secondary CPUs ... [ 0.004557] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012020] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.022025] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031754] smp: Brought up 1 node, 4 CPUs [ 0.031761] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031765] CPU: All CPU(s) started in SVC mode. [ 0.032316] devtmpfs: initialized [ 0.037315] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.037512] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.037520] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038090] pinctrl core: initialized pinctrl subsystem [ 0.038720] DMI not present or invalid. [ 0.038828] NET: Registered protocol family 16 [ 0.039574] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040448] cpuidle: using governor menu [ 0.048870] No ATAGs? [ 0.048925] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048932] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.051718] Serial: AMBA PL011 UART driver [ 0.052158] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.052270] iommu: Adding device reg-dummy to group 0 [ 0.052300] iommu: Adding device 50000000.host1x to group 1 [ 0.052324] iommu: Adding device 54200000.dc to group 2 [ 0.052350] iommu: Adding device 54240000.dc to group 3 [ 0.052362] iommu: Adding device 54280000.hdmi to group 4 [ 0.052373] iommu: Adding device 54540000.sor to group 5 [ 0.052383] iommu: Adding device 545c0000.dpaux to group 6 [ 0.052407] iommu: Adding device 57000000.gpu to group 7 [ 0.052418] iommu: Adding device 60005000.timer to group 8 [ 0.052428] iommu: Adding device 60007000.flow-controller to group 9 [ 0.052439] iommu: Adding device 6000c800.actmon to group 10 [ 0.052454] iommu: Adding device 6000d000.gpio to group 11 [ 0.052465] iommu: Adding device 60020000.dma to group 12 [ 0.052475] iommu: Adding device 70000800.apbmisc to group 13 [ 0.052486] iommu: Adding device 70000868.pinmux to group 14 [ 0.052497] iommu: Adding device 70006000.serial to group 15 [ 0.052508] iommu: Adding device 7000a000.pwm to group 16 [ 0.052519] iommu: Adding device 7000c000.i2c to group 17 [ 0.052531] iommu: Adding device 7000c400.i2c to group 18 [ 0.052542] iommu: Adding device 7000c500.i2c to group 19 [ 0.052554] iommu: Adding device 7000c700.i2c to group 20 [ 0.052565] iommu: Adding device 7000d000.i2c to group 21 [ 0.052578] iommu: Adding device 7000d400.spi to group 22 [ 0.052589] iommu: Adding device 7000da00.spi to group 23 [ 0.052599] iommu: Adding device 7000e000.rtc to group 24 [ 0.052610] iommu: Adding device 7000e400.pmc to group 25 [ 0.052621] iommu: Adding device 7000f800.fuse to group 26 [ 0.052632] iommu: Adding device 70019000.memory-controller to group 27 [ 0.052645] iommu: Adding device 7001b000.emc to group 28 [ 0.052655] iommu: Adding device 70030000.hda to group 29 [ 0.052667] iommu: Adding device 70090000.usb to group 30 [ 0.052678] iommu: Adding device 7009f000.padctl to group 31 [ 0.052692] iommu: Adding device 700b0000.sdhci to group 32 [ 0.052703] iommu: Adding device 700b0400.sdhci to group 33 [ 0.052713] iommu: Adding device 700b0600.sdhci to group 34 [ 0.052724] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.052737] iommu: Adding device 70300000.ahub to group 36 [ 0.052748] iommu: Adding device pmu to group 37 [ 0.052758] iommu: Adding device timer to group 38 [ 0.052769] iommu: Adding device sdhci0_pwrseq to group 39 [ 0.052780] iommu: Adding device backlight to group 40 [ 0.052791] iommu: Adding device clocks to group 41 [ 0.052802] iommu: Adding device gpio-keys to group 42 [ 0.052815] iommu: Adding device regulators to group 43 [ 0.052826] iommu: Adding device regulators:regulator@0 to group 44 [ 0.052839] iommu: Adding device regulators:regulator@1 to group 45 [ 0.052850] iommu: Adding device regulators:regulator@2 to group 46 [ 0.052861] iommu: Adding device regulators:regulator@3 to group 47 [ 0.052872] iommu: Adding device regulators:regulator@4 to group 48 [ 0.052885] iommu: Adding device regulators:regulator@5 to group 49 [ 0.052896] iommu: Adding device regulators:regulator@6 to group 50 [ 0.052906] iommu: Adding device regulators:regulator@7 to group 51 [ 0.052918] iommu: Adding device regulators:regulator@8 to group 52 [ 0.052930] iommu: Adding device regulators:regulator@9 to group 53 [ 0.052943] iommu: Adding device regulators:regulator@10 to group 54 [ 0.052954] iommu: Adding device regulators:regulator@11 to group 55 [ 0.052965] iommu: Adding device regulators:regulator@12 to group 56 [ 0.052976] iommu: Adding device sound to group 57 [ 0.052987] iommu: Adding device gpio-restart to group 58 [ 0.052997] iommu: Adding device panel to group 59 [ 0.058071] AT91: Could not find identification node [ 0.058280] +5V_SYS: supplied by +VDD_MUX [ 0.058381] +3.3V_SYS: supplied by +VDD_MUX [ 0.058592] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.058598] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058633] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058638] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058670] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058675] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058707] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058712] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.058801] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.058806] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.058839] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.058843] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.059828] vgaarb: loaded [ 0.060096] SCSI subsystem initialized [ 0.060163] libata version 3.00 loaded. [ 0.060242] usbcore: registered new interface driver usbfs [ 0.060260] usbcore: registered new interface driver hub [ 0.060281] usbcore: registered new device driver usb [ 0.061563] pps_core: LinuxPPS API ver. 1 registered [ 0.061567] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.061575] PTP clock support registered [ 0.061641] EDAC MC: Ver: 3.0.0 [ 0.061763] dmi: Firmware registration failed. [ 0.062064] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.062074] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062517] clocksource: Switched to clocksource arch_sys_counter [ 0.082044] NET: Registered protocol family 2 [ 0.082235] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.082269] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.082332] TCP: Hash tables configured (established 8192 bind 8192) [ 0.082366] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.082381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.082443] NET: Registered protocol family 1 [ 0.082621] RPC: Registered named UNIX socket transport module. [ 0.082625] RPC: Registered udp transport module. [ 0.082628] RPC: Registered tcp transport module. [ 0.082631] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.082637] PCI: CLS 0 bytes, default 64 [ 0.083207] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.083497] iommu: Adding device alarmtimer to group 60 [ 0.083814] Initialise system trusted keyrings [ 0.083875] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.086205] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.086433] NFS: Registering the id_resolver key type [ 0.086442] Key type id_resolver registered [ 0.086446] Key type id_legacy registered [ 0.086462] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.087006] Key type asymmetric registered [ 0.087011] Asymmetric key parser 'x509' registered [ 0.087032] bounce: pool size: 64 pages [ 0.087050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.087055] io scheduler noop registered [ 0.087058] io scheduler deadline registered [ 0.087135] io scheduler cfq registered (default) [ 0.087139] io scheduler mq-deadline registered [ 0.087142] io scheduler kyber registered [ 0.088506] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.099125] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.100195] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.117516] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.117559] iommu: Adding device serial8250 to group 61 [ 0.118591] console [ttyS0] disabled [ 0.118610] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.380751] console [ttyS0] enabled [ 1.384543] SuperH (H)SCI(F) driver initialized [ 1.389418] msm_serial: driver initialized [ 1.393572] STMicroelectronics ASC driver initialized [ 1.400892] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.407442] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.414862] panel-simple panel: panel supply power not found, using dummy regulator [ 1.425181] brd: module loaded [ 1.430582] loop: module loaded [ 1.434654] as3722 4-0040: AS3722 with revision 0x1 found [ 1.441158] iommu: Adding device as3722-pinctrl to group 62 [ 1.448064] iommu: Adding device as3722-regulator to group 63 [ 1.455915] as3722-sd2: supplied by +5V_SYS [ 1.460319] as3722-sd3: supplied by +5V_SYS [ 1.464708] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.470871] as3722-sd4: supplied by +5V_SYS [ 1.475208] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.480932] as3722-sd5: supplied by +5V_SYS [ 1.486497] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.492213] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.498220] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.503828] as3722-ldo3: supplied by +3.3V_SYS [ 1.508274] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.515834] as3722-ldo4: supplied by +3.3V_SYS [ 1.520430] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.526434] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.531197] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.537871] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.543886] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.548651] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.555193] as3722-ldo9: supplied by +5V_SYS [ 1.559755] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.565945] as3722-ldo10: supplied by +5V_SYS [ 1.570447] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.576875] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.583373] iommu: Adding device as3722-rtc to group 64 [ 1.588734] iommu: Adding device as3722-adc to group 65 [ 1.594059] iommu: Adding device as3722-power-off to group 66 [ 1.599890] iommu: Adding device as3722-wdt to group 67 [ 1.616687] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.622182] iommu: Adding device Fixed MDIO bus.0 to group 68 [ 1.628064] libphy: Fixed MDIO Bus: probed [ 1.632490] CAN device driver interface [ 1.636634] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.642743] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.648559] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.654484] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.661427] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.668261] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.675666] usbcore: registered new interface driver pegasus [ 1.681323] usbcore: registered new interface driver asix [ 1.686722] usbcore: registered new interface driver ax88179_178a [ 1.692814] usbcore: registered new interface driver cdc_ether [ 1.698646] usbcore: registered new interface driver smsc75xx [ 1.704396] usbcore: registered new interface driver smsc95xx [ 1.710136] usbcore: registered new interface driver net1080 [ 1.715795] usbcore: registered new interface driver cdc_subset [ 1.721707] usbcore: registered new interface driver zaurus [ 1.727286] usbcore: registered new interface driver cdc_ncm [ 1.733607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.740118] ehci-pci: EHCI PCI platform driver [ 1.744566] ehci-platform: EHCI generic platform driver [ 1.749845] ehci-orion: EHCI orion driver [ 1.753901] SPEAr-ehci: EHCI SPEAr driver [ 1.757945] ehci-st: EHCI STMicroelectronics driver [ 1.762861] ehci-exynos: EHCI EXYNOS driver [ 1.767084] ehci-atmel: EHCI Atmel driver [ 1.771126] tegra-ehci: Tegra EHCI driver [ 1.775193] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.781360] ohci-pci: OHCI PCI platform driver [ 1.785808] ohci-platform: OHCI generic platform driver [ 1.791079] SPEAr-ohci: OHCI SPEAr driver [ 1.795128] ohci-st: OHCI STMicroelectronics driver [ 1.800038] ohci-atmel: OHCI Atmel driver [ 1.804303] usbcore: registered new interface driver usb-storage [ 1.811378] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.818748] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.825622] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.832575] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.839709] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.846065] i2c /dev entries driver [ 1.851933] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.862238] iommu: Adding device cpufreq-tegra124 to group 69 [ 1.869056] sdhci: Secure Digital Host Controller Interface driver [ 1.875230] sdhci: Copyright(c) Pierre Ossman [ 1.880124] Synopsys Designware Multimedia Card Interface Driver [ 1.886626] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.892562] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.906367] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.911237] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.930644] mmc0: Unknown controller version (3). You may experience problems. [ 1.937884] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.995378] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 2.002528] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.012692] ledtrig-cpu: registered to indicate activity on CPUs [ 2.012732] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 2.026882] usbcore: registered new interface driver usbhid [ 2.032438] usbhid: USB HID core driver [ 2.037660] NET: Registered protocol family 10 [ 2.042678] Segment Routing with IPv6 [ 2.046350] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.052450] NET: Registered protocol family 17 [ 2.056895] can: controller area network core (rev 20170425 abi 9) [ 2.063086] NET: Registered protocol family 29 [ 2.067517] can: raw protocol (rev 20170425) [ 2.071774] can: broadcast manager protocol (rev 20170425 t) [ 2.077426] can: netlink gateway (rev 20170425) max_hops=1 [ 2.083024] Key type dns_resolver registered [ 2.087484] ThumbEE CPU extension supported. [ 2.091753] Registering SWP/SWPB emulation handler [ 2.092690] mmc0: new high speed MMC card at address 0001 [ 2.092932] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 2.093000] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.093069] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.096838] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0) [ 2.100778] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.131927] Loading compiled-in X.509 certificates [ 2.141576] +3.3V_RUN: supplied by +3.3V_SYS [ 2.146698] +VDD_LED: supplied by +VDD_MUX [ 2.150862] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.156565] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 2.161260] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.165991] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 2.171256] +5V_VDD_TS_SW: supplied by +5V_SYS [ 2.176051] +5V_USB_HS: supplied by +5V_SYS [ 2.180401] +5V_USB_SS: supplied by +5V_SYS [ 2.185457] +3.3V_PANEL: supplied by +3.3V_RUN [ 2.190882] +3.3V_LP0: supplied by +3.3V_SYS [ 2.196014] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.196246] elan_i2c 1-0015: failed to read report data: -121 [ 2.207763] +5V_HDMI_CON: supplied by +5V_SYS [ 2.212854] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.219590] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 2.229977] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.236763] panel-simple panel: panel supply power not found, using dummy regulator [ 2.245591] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.259471] mmc1: Unknown controller version (3). You may experience problems. [ 2.266955] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.273372] mmc1: Switching to 3.3V signalling voltage failed [ 2.332587] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.333145] elan_i2c 1-0015: invalid report id data (ff) [ 2.346059] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.350930] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.364329] mmc2: Unknown controller version (3). You may experience problems. [ 2.371628] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.405813] mmc1: new high speed SDIO card at address 0001 [ 2.442683] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.546362] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.552990] [drm] No driver support for vblank timestamp query. [ 2.594230] mmc2: new high speed SDHC card at address 0007 [ 2.594564] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.604363] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.604367] GPT:3014591 != 15564799 [ 2.604368] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.604369] GPT:3014591 != 15564799 [ 2.604370] GPT: Use GNU Parted to correct GPT errors. [ 2.604396] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.641652] Console: switching to colour frame buffer device 170x48 [ 2.705768] drm drm: fb0: frame buffer device [ 2.710252] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.717732] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.725363] as3722-rtc as3722-rtc: setting system clock to 2000-01-03 16:45:19 UTC (946917919) [ 2.734380] +1.8V_RUN_CAM: disabling [ 2.738158] +3.3V_RUN_CAM: disabling [ 2.741890] +1.2V_RUN_CAM_FRONT: disabling [ 2.746266] +1.05V_RUN_CAM_REAR: disabling [ 2.750518] +2.8V_RUN_TOUCH: disabling [ 2.754507] +2.8V_RUN_CAM_AF: disabling [ 2.758500] +1.8V_RUN_VPP_FUSE: disabling [ 2.762751] +5V_VDD_TS_SW: disabling [ 2.766324] +5V_USB_HS: disabling [ 2.769628] +5V_USB_SS: disabling [ 2.773858] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.782456] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 3.092148] EXT4-fs (mmcblk0p3): recovery complete [ 3.097692] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.105820] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 3.113038] devtmpfs: mounted [ 3.116705] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#