U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 2.8 MiB/s done Bytes transferred = 8172040 (7cb208 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.6 MiB/s done Bytes transferred = 68203 (10a6b hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7cb200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a6a Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc2-next-20170927-202386-g045c520 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 26 23:51:57 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c1590380, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef83000 s39616 r8192 d21824 u69632 [ 0.000000] pcpu-alloc: s39616 r8192 d21824 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994380K/2097148K available (10240K kernel code, 1634K rwdata, 4508K rodata, 2048K init, 401K bss, 37232K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1598828 (1635 kB) [ 0.000000] .bss : 0xc15a1ba8 - 0xc16061bc ( 402 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001889] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001897] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001905] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001910] Switching to timer-based delay loop, resolution 83ns [ 0.002125] Console: colour dummy device 80x30 [ 0.002141] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002148] pid_max: default: 32768 minimum: 301 [ 0.002189] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002194] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002399] CPU: Testing write buffer coherency: ok [ 0.002523] /cpus/cpu@0 missing clock-frequency property [ 0.002539] /cpus/cpu@1 missing clock-frequency property [ 0.002554] /cpus/cpu@2 missing clock-frequency property [ 0.002569] /cpus/cpu@3 missing clock-frequency property [ 0.002575] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002696] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003416] Hierarchical SRCU implementation. [ 0.004122] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004404] EFI services will not be available. [ 0.004465] smp: Bringing up secondary CPUs ... [ 0.004695] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012107] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.022114] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031890] smp: Brought up 1 node, 4 CPUs [ 0.031898] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031901] CPU: All CPU(s) started in SVC mode. [ 0.032454] devtmpfs: initialized [ 0.037378] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.037569] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.037578] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038157] pinctrl core: initialized pinctrl subsystem [ 0.038791] DMI not present or invalid. [ 0.038897] NET: Registered protocol family 16 [ 0.039652] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040540] cpuidle: using governor menu [ 0.048950] No ATAGs? [ 0.049004] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.049010] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.051823] Serial: AMBA PL011 UART driver [ 0.052195] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.052305] iommu: Adding device reg-dummy to group 0 [ 0.052333] iommu: Adding device 50000000.host1x to group 1 [ 0.052358] iommu: Adding device 54200000.dc to group 2 [ 0.052381] iommu: Adding device 54240000.dc to group 3 [ 0.052395] iommu: Adding device 54280000.hdmi to group 4 [ 0.052406] iommu: Adding device 54540000.sor to group 5 [ 0.052420] iommu: Adding device 545c0000.dpaux to group 6 [ 0.052444] iommu: Adding device 57000000.gpu to group 7 [ 0.052455] iommu: Adding device 60005000.timer to group 8 [ 0.052466] iommu: Adding device 60007000.flow-controller to group 9 [ 0.052477] iommu: Adding device 6000c800.actmon to group 10 [ 0.052488] iommu: Adding device 6000d000.gpio to group 11 [ 0.052501] iommu: Adding device 60020000.dma to group 12 [ 0.052511] iommu: Adding device 70000800.apbmisc to group 13 [ 0.052523] iommu: Adding device 70000868.pinmux to group 14 [ 0.052534] iommu: Adding device 70006000.serial to group 15 [ 0.052547] iommu: Adding device 7000a000.pwm to group 16 [ 0.052558] iommu: Adding device 7000c000.i2c to group 17 [ 0.052569] iommu: Adding device 7000c400.i2c to group 18 [ 0.052580] iommu: Adding device 7000c500.i2c to group 19 [ 0.052592] iommu: Adding device 7000c700.i2c to group 20 [ 0.052603] iommu: Adding device 7000d000.i2c to group 21 [ 0.052615] iommu: Adding device 7000d400.spi to group 22 [ 0.052626] iommu: Adding device 7000da00.spi to group 23 [ 0.052637] iommu: Adding device 7000e000.rtc to group 24 [ 0.052647] iommu: Adding device 7000e400.pmc to group 25 [ 0.052657] iommu: Adding device 7000f800.fuse to group 26 [ 0.052671] iommu: Adding device 70019000.memory-controller to group 27 [ 0.052681] iommu: Adding device 7001b000.emc to group 28 [ 0.052694] iommu: Adding device 70030000.hda to group 29 [ 0.052705] iommu: Adding device 70090000.usb to group 30 [ 0.052716] iommu: Adding device 7009f000.padctl to group 31 [ 0.052727] iommu: Adding device 700b0000.sdhci to group 32 [ 0.052738] iommu: Adding device 700b0400.sdhci to group 33 [ 0.052749] iommu: Adding device 700b0600.sdhci to group 34 [ 0.052759] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.052770] iommu: Adding device 70300000.ahub to group 36 [ 0.052782] iommu: Adding device pmu to group 37 [ 0.052795] iommu: Adding device timer to group 38 [ 0.052806] iommu: Adding device sdhci0_pwrseq to group 39 [ 0.052817] iommu: Adding device backlight to group 40 [ 0.052828] iommu: Adding device clocks to group 41 [ 0.052838] iommu: Adding device gpio-keys to group 42 [ 0.052849] iommu: Adding device regulators to group 43 [ 0.052860] iommu: Adding device regulators:regulator@0 to group 44 [ 0.052871] iommu: Adding device regulators:regulator@1 to group 45 [ 0.052884] iommu: Adding device regulators:regulator@2 to group 46 [ 0.052895] iommu: Adding device regulators:regulator@3 to group 47 [ 0.052908] iommu: Adding device regulators:regulator@4 to group 48 [ 0.052918] iommu: Adding device regulators:regulator@5 to group 49 [ 0.052929] iommu: Adding device regulators:regulator@6 to group 50 [ 0.052940] iommu: Adding device regulators:regulator@7 to group 51 [ 0.052952] iommu: Adding device regulators:regulator@8 to group 52 [ 0.052965] iommu: Adding device regulators:regulator@9 to group 53 [ 0.052977] iommu: Adding device regulators:regulator@10 to group 54 [ 0.052988] iommu: Adding device regulators:regulator@11 to group 55 [ 0.052999] iommu: Adding device regulators:regulator@12 to group 56 [ 0.053009] iommu: Adding device sound to group 57 [ 0.053020] iommu: Adding device gpio-restart to group 58 [ 0.053033] iommu: Adding device panel to group 59 [ 0.058099] AT91: Could not find identification node [ 0.058309] +5V_SYS: supplied by +VDD_MUX [ 0.058407] +3.3V_SYS: supplied by +VDD_MUX [ 0.058619] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.058625] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058659] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058664] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058697] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058702] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058734] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058739] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.058830] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.058835] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.058868] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.058872] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.059862] vgaarb: loaded [ 0.060123] SCSI subsystem initialized [ 0.060193] libata version 3.00 loaded. [ 0.060270] usbcore: registered new interface driver usbfs [ 0.060288] usbcore: registered new interface driver hub [ 0.060308] usbcore: registered new device driver usb [ 0.061587] pps_core: LinuxPPS API ver. 1 registered [ 0.061591] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.061599] PTP clock support registered [ 0.061665] EDAC MC: Ver: 3.0.0 [ 0.061769] dmi: Firmware registration failed. [ 0.062083] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.062093] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062513] clocksource: Switched to clocksource arch_sys_counter [ 0.081633] NET: Registered protocol family 2 [ 0.081824] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.081857] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.081920] TCP: Hash tables configured (established 8192 bind 8192) [ 0.081953] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.081968] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.082028] NET: Registered protocol family 1 [ 0.082178] RPC: Registered named UNIX socket transport module. [ 0.082181] RPC: Registered udp transport module. [ 0.082184] RPC: Registered tcp transport module. [ 0.082187] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.082193] PCI: CLS 0 bytes, default 64 [ 0.082785] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.083068] iommu: Adding device alarmtimer to group 60 [ 0.083432] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.085457] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.085673] NFS: Registering the id_resolver key type [ 0.085686] Key type id_resolver registered [ 0.085690] Key type id_legacy registered [ 0.085706] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.086242] bounce: pool size: 64 pages [ 0.086261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.086265] io scheduler noop registered [ 0.086269] io scheduler deadline registered [ 0.086343] io scheduler cfq registered (default) [ 0.086347] io scheduler mq-deadline registered [ 0.086351] io scheduler kyber registered [ 0.087630] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.098125] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.099199] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.116323] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.116364] iommu: Adding device serial8250 to group 61 [ 0.117384] console [ttyS0] disabled [ 0.117401] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.366197] console [ttyS0] enabled [ 1.369985] SuperH (H)SCI(F) driver initialized [ 1.374873] msm_serial: driver initialized [ 1.379018] STMicroelectronics ASC driver initialized [ 1.386409] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.392955] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.400367] panel-simple panel: panel supply power not found, using dummy regulator [ 1.410682] brd: module loaded [ 1.415962] loop: module loaded [ 1.420008] as3722 4-0040: AS3722 with revision 0x1 found [ 1.426530] iommu: Adding device as3722-pinctrl to group 62 [ 1.433428] iommu: Adding device as3722-regulator to group 63 [ 1.441278] as3722-sd2: supplied by +5V_SYS [ 1.445736] as3722-sd3: supplied by +5V_SYS [ 1.450067] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.456233] as3722-sd4: supplied by +5V_SYS [ 1.460562] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.466295] as3722-sd5: supplied by +5V_SYS [ 1.471841] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.477569] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.483568] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.489163] as3722-ldo3: supplied by +3.3V_SYS [ 1.493614] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.501173] as3722-ldo4: supplied by +3.3V_SYS [ 1.505771] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.511765] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.516535] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.523211] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.529217] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.533994] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.540523] as3722-ldo9: supplied by +5V_SYS [ 1.545092] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.551277] as3722-ldo10: supplied by +5V_SYS [ 1.555787] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.562212] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.568703] iommu: Adding device as3722-rtc to group 64 [ 1.574067] iommu: Adding device as3722-adc to group 65 [ 1.579382] iommu: Adding device as3722-power-off to group 66 [ 1.585219] iommu: Adding device as3722-wdt to group 67 [ 1.602023] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.607524] iommu: Adding device Fixed MDIO bus.0 to group 68 [ 1.613412] libphy: Fixed MDIO Bus: probed [ 1.617829] CAN device driver interface [ 1.621965] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.628076] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.633898] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.639821] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.646770] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.653600] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.660996] usbcore: registered new interface driver pegasus [ 1.666660] usbcore: registered new interface driver asix [ 1.672056] usbcore: registered new interface driver ax88179_178a [ 1.678150] usbcore: registered new interface driver cdc_ether [ 1.683986] usbcore: registered new interface driver smsc75xx [ 1.689729] usbcore: registered new interface driver smsc95xx [ 1.695478] usbcore: registered new interface driver net1080 [ 1.701132] usbcore: registered new interface driver cdc_subset [ 1.707053] usbcore: registered new interface driver zaurus [ 1.712633] usbcore: registered new interface driver cdc_ncm [ 1.718939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.725457] ehci-pci: EHCI PCI platform driver [ 1.729900] ehci-platform: EHCI generic platform driver [ 1.735185] ehci-orion: EHCI orion driver [ 1.739236] SPEAr-ehci: EHCI SPEAr driver [ 1.743286] ehci-st: EHCI STMicroelectronics driver [ 1.748198] ehci-exynos: EHCI EXYNOS driver [ 1.752421] ehci-atmel: EHCI Atmel driver [ 1.756470] tegra-ehci: Tegra EHCI driver [ 1.760530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.766703] ohci-pci: OHCI PCI platform driver [ 1.771146] ohci-platform: OHCI generic platform driver [ 1.776422] SPEAr-ohci: OHCI SPEAr driver [ 1.780466] ohci-st: OHCI STMicroelectronics driver [ 1.785382] ohci-atmel: OHCI Atmel driver [ 1.789629] usbcore: registered new interface driver usb-storage [ 1.796646] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.798293] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.798296] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.800606] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.800628] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.800889] i2c /dev entries driver [ 1.802677] IR NEC protocol handler initialized [ 1.802678] IR RC5(x/sz) protocol handler initialized [ 1.802680] IR RC6 protocol handler initialized [ 1.802681] IR JVC protocol handler initialized [ 1.802683] IR Sony protocol handler initialized [ 1.802685] IR SANYO protocol handler initialized [ 1.802686] IR Sharp protocol handler initialized [ 1.802688] IR MCE Keyboard/mouse protocol handler initialized [ 1.802690] IR XMP protocol handler initialized [ 1.804200] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.808277] iommu: Adding device cpufreq-tegra124 to group 69 [ 1.809588] sdhci: Secure Digital Host Controller Interface driver [ 1.809590] sdhci: Copyright(c) Pierre Ossman [ 1.810290] Synopsys Designware Multimedia Card Interface Driver [ 1.810891] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.811238] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.819443] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.819453] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.834695] mmc0: Unknown controller version (3). You may experience problems. [ 1.834732] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.892523] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.946268] ledtrig-cpu: registered to indicate activity on CPUs [ 1.952398] usbcore: registered new interface driver usbhid [ 1.957973] usbhid: USB HID core driver [ 1.963189] NET: Registered protocol family 10 [ 1.967912] Segment Routing with IPv6 [ 1.971602] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.977710] NET: Registered protocol family 17 [ 1.982144] can: controller area network core (rev 20170425 abi 9) [ 1.988340] NET: Registered protocol family 29 [ 1.992776] can: raw protocol (rev 20170425) [ 1.997033] can: broadcast manager protocol (rev 20170425 t) [ 2.002685] can: netlink gateway (rev 20170425) max_hops=1 [ 2.008274] Key type dns_resolver registered [ 2.012737] ThumbEE CPU extension supported. [ 2.016996] Registering SWP/SWPB emulation handler [ 2.026599] +3.3V_RUN: supplied by +3.3V_SYS [ 2.031324] +VDD_LED: supplied by +VDD_MUX [ 2.035683] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.041288] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 2.046031] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.050739] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 2.056123] +5V_VDD_TS_SW: supplied by +5V_SYS [ 2.060811] +5V_USB_HS: supplied by +5V_SYS [ 2.065408] +5V_USB_SS: supplied by +5V_SYS [ 2.070185] +3.3V_PANEL: supplied by +3.3V_RUN [ 2.075490] +3.3V_LP0: supplied by +3.3V_SYS [ 2.080315] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.086413] elan_i2c 1-0015: fetching report descriptor failed.: -121 [ 2.086510] +5V_HDMI_CON: supplied by +5V_SYS [ 2.087373] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.087436] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 2.089353] mmc0: new high speed MMC card at address 0001 [ 2.090753] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 2.091707] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.092479] panel-simple panel: panel supply power not found, using dummy regulator [ 2.093188] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.094479] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.094545] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.094679] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0) [ 2.099174] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.102671] mmc1: Unknown controller version (3). You may experience problems. [ 2.102728] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.112781] mmc1: Switching to 3.3V signalling voltage failed [ 2.172632] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.173694] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.173703] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.182230] mmc2: Unknown controller version (3). You may experience problems. [ 2.182287] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.209604] mmc1: new high speed SDIO card at address 0001 [ 2.219286] elan_i2c 1-0015: device initialize failed: -121 [ 2.242862] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.345459] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.352062] [drm] No driver support for vblank timestamp query. [ 2.393282] mmc2: new high speed SDHC card at address 0007 [ 2.393647] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.403787] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.403791] GPT:3014591 != 15564799 [ 2.403792] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.403793] GPT:3014591 != 15564799 [ 2.403795] GPT: Use GNU Parted to correct GPT errors. [ 2.403820] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.440517] Console: switching to colour frame buffer device 170x48 [ 2.446684] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 2.447012] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 2.522491] drm drm: fb0: frame buffer device [ 2.527003] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.534571] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.541873] as3722-rtc as3722-rtc: setting system clock to 2000-01-02 15:49:29 UTC (946828169) [ 2.550863] +1.8V_RUN_CAM: disabling [ 2.554625] +3.3V_RUN_CAM: disabling [ 2.558302] +1.2V_RUN_CAM_FRONT: disabling [ 2.562487] +1.05V_RUN_CAM_REAR: disabling [ 2.566715] +2.8V_RUN_TOUCH: disabling [ 2.570588] +2.8V_RUN_CAM_AF: disabling [ 2.574602] +1.8V_RUN_VPP_FUSE: disabling [ 2.578714] +5V_VDD_TS_SW: disabling [ 2.582280] +5V_USB_HS: disabling [ 2.585630] +5V_USB_SS: disabling [ 2.589741] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.598363] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.690291] EXT4-fs (mmcblk0p3): recovery complete [ 2.695947] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.704097] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.711270] devtmpfs: mounted [ 2.714967] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#