U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 3.2 MiB/s done Bytes transferred = 8172040 (7cb208 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 2.9 MiB/s done Bytes transferred = 67173 (10665 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7cb200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013664 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc2-next-20170927-202386-g045c520 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 26 23:51:57 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c1590380, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef84000 s39616 r8192 d21824 u69632 [ 0.000000] pcpu-alloc: s39616 r8192 d21824 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993364K/2096128K available (10240K kernel code, 1634K rwdata, 4508K rodata, 2048K init, 401K bss, 37228K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1598828 (1635 kB) [ 0.000000] .bss : 0xc15a1ba8 - 0xc16061bc ( 402 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000044] Switching to timer-based delay loop, resolution 1000ns [ 0.005602] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.005623] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005643] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005657] Switching to timer-based delay loop, resolution 83ns [ 0.006112] Console: colour dummy device 80x30 [ 0.006145] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.006163] pid_max: default: 32768 minimum: 301 [ 0.006266] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006281] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006780] CPU: Testing write buffer coherency: ok [ 0.007035] /cpus/cpu@0 missing clock-frequency property [ 0.007081] /cpus/cpu@1 missing clock-frequency property [ 0.007126] /cpus/cpu@2 missing clock-frequency property [ 0.007172] /cpus/cpu@3 missing clock-frequency property [ 0.007187] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007486] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.009511] Hierarchical SRCU implementation. [ 0.011458] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.012252] EFI services will not be available. [ 0.012401] smp: Bringing up secondary CPUs ... [ 0.012875] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.016026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.026067] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035595] smp: Brought up 1 node, 4 CPUs [ 0.035616] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.035625] CPU: All CPU(s) started in SVC mode. [ 0.037131] devtmpfs: initialized [ 0.051004] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.051396] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.051416] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.052871] pinctrl core: initialized pinctrl subsystem [ 0.054440] DMI not present or invalid. [ 0.054685] NET: Registered protocol family 16 [ 0.056806] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.059227] cpuidle: using governor menu [ 0.084474] No ATAGs? [ 0.084603] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.084619] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.092006] Serial: AMBA PL011 UART driver [ 0.093206] iommu: Adding device reg-dummy to group 0 [ 0.093244] iommu: Adding device 1003000.pcie to group 1 [ 0.093324] iommu: Adding device 50000000.host1x to group 2 [ 0.093394] iommu: Adding device 54200000.dc to group 3 [ 0.093463] iommu: Adding device 54240000.dc to group 4 [ 0.093499] iommu: Adding device 54280000.hdmi to group 5 [ 0.093572] iommu: Adding device 57000000.gpu to group 6 [ 0.093605] iommu: Adding device 60005000.timer to group 7 [ 0.093636] iommu: Adding device 60007000.flow-controller to group 8 [ 0.093668] iommu: Adding device 6000c800.actmon to group 9 [ 0.093701] iommu: Adding device 6000d000.gpio to group 10 [ 0.093732] iommu: Adding device 60020000.dma to group 11 [ 0.093768] iommu: Adding device 70000800.apbmisc to group 12 [ 0.093803] iommu: Adding device 70000868.pinmux to group 13 [ 0.093836] iommu: Adding device 70006000.serial to group 14 [ 0.093867] iommu: Adding device 70006040.serial to group 15 [ 0.093897] iommu: Adding device 70006300.serial to group 16 [ 0.093927] iommu: Adding device 7000c000.i2c to group 17 [ 0.093958] iommu: Adding device 7000c400.i2c to group 18 [ 0.093989] iommu: Adding device 7000c500.i2c to group 19 [ 0.094020] iommu: Adding device 7000c700.i2c to group 20 [ 0.094052] iommu: Adding device 7000d000.i2c to group 21 [ 0.094091] iommu: Adding device 7000d400.spi to group 22 [ 0.094123] iommu: Adding device 7000da00.spi to group 23 [ 0.094154] iommu: Adding device 7000e000.rtc to group 24 [ 0.094184] iommu: Adding device 7000e400.pmc to group 25 [ 0.094214] iommu: Adding device 7000f800.fuse to group 26 [ 0.094246] iommu: Adding device 70019000.memory-controller to group 27 [ 0.094276] iommu: Adding device 7001b000.emc to group 28 [ 0.094307] iommu: Adding device 70027000.sata to group 29 [ 0.094342] iommu: Adding device 70030000.hda to group 30 [ 0.094375] iommu: Adding device 70090000.usb to group 31 [ 0.094406] iommu: Adding device 7009f000.padctl to group 32 [ 0.094442] iommu: Adding device 700b0400.sdhci to group 33 [ 0.094473] iommu: Adding device 700b0600.sdhci to group 34 [ 0.094505] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.094536] iommu: Adding device 70110000.clock to group 36 [ 0.094571] iommu: Adding device 70300000.ahub to group 37 [ 0.094603] iommu: Adding device 7d000000.usb to group 38 [ 0.094639] iommu: Adding device 7d000000.usb-phy to group 39 [ 0.094669] iommu: Adding device 7d004000.usb to group 40 [ 0.094701] iommu: Adding device 7d004000.usb-phy to group 41 [ 0.094732] iommu: Adding device 7d008000.usb to group 42 [ 0.094763] iommu: Adding device 7d008000.usb-phy to group 43 [ 0.094799] iommu: Adding device pmu to group 44 [ 0.094830] iommu: Adding device timer to group 45 [ 0.094861] iommu: Adding device clocks to group 46 [ 0.094896] iommu: Adding device gpio-keys to group 47 [ 0.094928] iommu: Adding device regulators to group 48 [ 0.094959] iommu: Adding device regulators:regulator@0 to group 49 [ 0.094991] iommu: Adding device regulators:regulator@1 to group 50 [ 0.095022] iommu: Adding device regulators:regulator@2 to group 51 [ 0.095053] iommu: Adding device regulators:regulator@3 to group 52 [ 0.095084] iommu: Adding device regulators:regulator@4 to group 53 [ 0.095120] iommu: Adding device regulators:regulator@7 to group 54 [ 0.095156] iommu: Adding device regulators:regulator@8 to group 55 [ 0.095188] iommu: Adding device regulators:regulator@10 to group 56 [ 0.095219] iommu: Adding device regulators:regulator@11 to group 57 [ 0.095250] iommu: Adding device regulators:regulator@12 to group 58 [ 0.095281] iommu: Adding device regulators:regulator@13 to group 59 [ 0.095312] iommu: Adding device regulators:regulator@14 to group 60 [ 0.095342] iommu: Adding device sound to group 61 [ 0.110057] AT91: Could not find identification node [ 0.110622] +5V_SYS: supplied by +VDD_MUX [ 0.110901] +3.3V_SYS: supplied by +VDD_MUX [ 0.111516] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.111533] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.111634] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.111648] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.111833] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.111848] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.111945] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.111958] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.112053] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.112067] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.112161] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.112174] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.115144] vgaarb: loaded [ 0.115914] SCSI subsystem initialized [ 0.116079] libata version 3.00 loaded. [ 0.116278] usbcore: registered new interface driver usbfs [ 0.116327] usbcore: registered new interface driver hub [ 0.116385] usbcore: registered new device driver usb [ 0.119851] pps_core: LinuxPPS API ver. 1 registered [ 0.119862] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.119884] PTP clock support registered [ 0.120074] EDAC MC: Ver: 3.0.0 [ 0.120353] dmi: Firmware registration failed. [ 0.122899] clocksource: Switched to clocksource arch_sys_counter [ 0.176421] NET: Registered protocol family 2 [ 0.176908] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.177009] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.177197] TCP: Hash tables configured (established 8192 bind 8192) [ 0.177278] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.177323] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.177478] NET: Registered protocol family 1 [ 0.177796] RPC: Registered named UNIX socket transport module. [ 0.177807] RPC: Registered udp transport module. [ 0.177816] RPC: Registered tcp transport module. [ 0.177825] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.177837] PCI: CLS 0 bytes, default 64 [ 0.179298] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.180038] iommu: Adding device alarmtimer to group 62 [ 0.180927] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.186761] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.187336] NFS: Registering the id_resolver key type [ 0.187360] Key type id_resolver registered [ 0.187370] Key type id_legacy registered [ 0.187415] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.188804] bounce: pool size: 64 pages [ 0.188853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.188865] io scheduler noop registered [ 0.188875] io scheduler deadline registered [ 0.189098] io scheduler cfq registered (default) [ 0.189109] io scheduler mq-deadline registered [ 0.189118] io scheduler kyber registered [ 0.192858] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 0.193003] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 0.193459] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.212242] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 0.212297] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 0.218493] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 0.225429] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.228495] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.279411] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.279514] iommu: Adding device serial8250 to group 63 [ 0.282029] console [ttyS0] disabled [ 0.282069] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.546722] console [ttyS0] enabled [ 1.551082] SuperH (H)SCI(F) driver initialized [ 1.556739] msm_serial: driver initialized [ 1.561021] STMicroelectronics ASC driver initialized [ 1.566979] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.576246] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.591177] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.607916] brd: module loaded [ 1.616853] loop: module loaded [ 1.621181] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.629521] as3722 4-0040: AS3722 with revision 0x1 found [ 1.636836] iommu: Adding device as3722-pinctrl to group 64 [ 1.643911] iommu: Adding device as3722-regulator to group 65 [ 1.652483] as3722-sd2: supplied by +5V_SYS [ 1.657174] as3722-sd3: supplied by +5V_SYS [ 1.661562] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.667894] as3722-sd4: supplied by +5V_SYS [ 1.672486] as3722-sd5: supplied by +5V_SYS [ 1.678433] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.684486] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.690653] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.696532] as3722-ldo3: supplied by +3.3V_SYS [ 1.701007] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.708774] as3722-ldo4: supplied by +3.3V_SYS [ 1.713453] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.719629] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.724478] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.731355] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.737027] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.743219] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.753804] iommu: Adding device as3722-rtc to group 66 [ 1.759342] iommu: Adding device as3722-adc to group 67 [ 1.764886] iommu: Adding device as3722-power-off to group 68 [ 1.770920] iommu: Adding device as3722-wdt to group 69 [ 1.777995] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.800285] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.807373] iommu: Adding device Fixed MDIO bus.0 to group 70 [ 1.813493] libphy: Fixed MDIO Bus: probed [ 1.818533] CAN device driver interface [ 1.823338] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.830391] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.836266] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.842227] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.849193] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.858616] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.866058] usbcore: registered new interface driver pegasus [ 1.871745] usbcore: registered new interface driver asix [ 1.877187] usbcore: registered new interface driver ax88179_178a [ 1.883316] usbcore: registered new interface driver cdc_ether [ 1.889178] usbcore: registered new interface driver smsc75xx [ 1.894975] usbcore: registered new interface driver smsc95xx [ 1.900740] usbcore: registered new interface driver net1080 [ 1.906434] usbcore: registered new interface driver cdc_subset [ 1.912376] usbcore: registered new interface driver zaurus [ 1.918005] usbcore: registered new interface driver cdc_ncm [ 1.923908] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.929500] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.936923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.943458] ehci-pci: EHCI PCI platform driver [ 1.947929] ehci-platform: EHCI generic platform driver [ 1.953378] ehci-orion: EHCI orion driver [ 1.957547] SPEAr-ehci: EHCI SPEAr driver [ 1.961697] ehci-st: EHCI STMicroelectronics driver [ 1.966724] ehci-exynos: EHCI EXYNOS driver [ 1.971068] ehci-atmel: EHCI Atmel driver [ 1.975230] tegra-ehci: Tegra EHCI driver [ 1.982080] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.987510] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.995259] tegra-ehci 7d004000.usb: irq 355, io mem 0x7d004000 [ 2.022926] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 2.029509] hub 1-0:1.0: USB hub found [ 2.033311] hub 1-0:1.0: 1 port detected [ 2.037791] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.043993] ohci-pci: OHCI PCI platform driver [ 2.048467] ohci-platform: OHCI generic platform driver [ 2.053899] SPEAr-ohci: OHCI SPEAr driver [ 2.058046] ohci-st: OHCI STMicroelectronics driver [ 2.063075] ohci-atmel: OHCI Atmel driver [ 2.067869] usbcore: registered new interface driver usb-storage [ 2.075447] iommu: Adding device ci_hdrc.0 to group 71 [ 2.087671] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 2.094571] as3722-rtc as3722-rtc: RTC interrupt 378 [ 2.102987] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 2.110154] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 2.116910] i2c /dev entries driver [ 2.124366] IR NEC protocol handler initialized [ 2.128892] IR RC5(x/sz) protocol handler initialized [ 2.133956] IR RC6 protocol handler initialized [ 2.138479] IR JVC protocol handler initialized [ 2.143023] IR Sony protocol handler initialized [ 2.147634] IR SANYO protocol handler initialized [ 2.152331] IR Sharp protocol handler initialized [ 2.157044] IR MCE Keyboard/mouse protocol handler initialized [ 2.162870] IR XMP protocol handler initialized [ 2.170634] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 2.185850] iommu: Adding device cpufreq-tegra124 to group 72 [ 2.194051] sdhci: Secure Digital Host Controller Interface driver [ 2.200221] sdhci: Copyright(c) Pierre Ossman [ 2.206282] Synopsys Designware Multimedia Card Interface Driver [ 2.213675] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.220136] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.225049] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.246289] mmc0: Unknown controller version (3). You may experience problems. [ 2.253569] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.322925] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.332513] ledtrig-cpu: registered to indicate activity on CPUs [ 2.338899] usbcore: registered new interface driver usbhid [ 2.344485] usbhid: USB HID core driver [ 2.352331] NET: Registered protocol family 10 [ 2.357483] Segment Routing with IPv6 [ 2.361277] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.367722] NET: Registered protocol family 17 [ 2.372167] can: controller area network core (rev 20170425 abi 9) [ 2.378417] NET: Registered protocol family 29 [ 2.382857] can: raw protocol (rev 20170425) [ 2.387139] can: broadcast manager protocol (rev 20170425 t) [ 2.392797] can: netlink gateway (rev 20170425) max_hops=1 [ 2.398569] Key type dns_resolver registered [ 2.403373] ThumbEE CPU extension supported. [ 2.407644] Registering SWP/SWPB emulation handler [ 2.426512] +3.3V_RUN: supplied by +3.3V_SYS [ 2.432078] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.436803] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.442746] +5V_USB_HS: supplied by +5V_SYS [ 2.448747] +3.3V_LP0: supplied by +3.3V_SYS [ 2.455283] +5V_HDMI_CON: supplied by +5V_SYS [ 2.460322] +5V_SATA: supplied by +5V_SYS [ 2.465052] +12V_SATA: supplied by +VDD_MUX [ 2.470976] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.471564] mmc0: new high speed MMC card at address 0001 [ 2.472303] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.472825] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.473513] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.478236] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (237:0) [ 2.481125] mmcblk0: p1 [ 2.509507] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.516565] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.524578] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.530210] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.539881] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.550486] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.561172] as3722-sd2: supplied by +5V_SYS [ 2.565738] as3722-sd3: supplied by +5V_SYS [ 2.570135] as3722-sd4: supplied by +5V_SYS [ 2.574666] as3722-sd5: supplied by +5V_SYS [ 2.580524] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.586323] as3722-ldo1: supplied by +3.3V_RUN [ 2.591088] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.596806] as3722-ldo3: supplied by +3.3V_SYS [ 2.602099] as3722-ldo4: supplied by +3.3V_SYS [ 2.606901] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.611767] as3722-ldo6: supplied by +3.3V_RUN [ 2.616459] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.621844] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.628972] as3722-ldo9: supplied by +5V_SYS [ 2.634579] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.641132] as3722-ldo10: supplied by +5V_SYS [ 2.646094] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.652936] as3722-ldo11: supplied by +3.3V_RUN [ 2.658233] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.668288] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.677363] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.688113] scsi host0: tegra-ahci [ 2.692563] scsi host1: tegra-ahci [ 2.696267] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.704304] ata2: DUMMY [ 2.710201] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.715667] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.723444] tegra-ehci 7d008000.usb: irq 356, io mem 0x7d008000 [ 2.753021] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.759745] hub 2-0:1.0: USB hub found [ 2.763600] hub 2-0:1.0: 1 port detected [ 2.770143] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.775095] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.787125] mmc1: Unknown controller version (3). You may experience problems. [ 2.794473] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.863455] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.871607] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.880439] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.888842] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.913027] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.921368] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.935171] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.941449] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.947675] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.954585] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.961898] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.967461] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.973530] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.983229] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.992962] pci 0000:00:01.0: enabling Extended Tags [ 2.997942] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.007748] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.017559] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.024220] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.034273] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.036701] ata1: SATA link down (SStatus 0 SControl 300) [ 3.045734] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.055430] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.065148] pci 0000:00:02.0: enabling Extended Tags [ 3.070115] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.079884] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.089667] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.096292] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.106319] PCI: bus0: Fast back to back transfers disabled [ 3.111900] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.119955] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.128199] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.134288] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.141264] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.162492] mmc1: new high speed SDHC card at address aaaa [ 3.168699] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.173516] PCI: bus1: Fast back to back transfers disabled [ 3.179116] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.185994] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.192048] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.197708] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.204559] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.211919] pci 0000:02:00.0: supports D1 D2 [ 3.216204] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.236658] mmcblk1: p1 p2 p3 [ 3.253059] PCI: bus2: Fast back to back transfers disabled [ 3.258637] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.265353] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.272153] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.278991] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.286770] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.292867] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.300214] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.305218] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.312017] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.319791] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.327152] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.333267] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.338227] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.344359] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.351142] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.358927] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.366064] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.372394] pcieport 0000:00:01.0: Signaling PME with IRQ 394 [ 3.378296] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.385430] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.391769] pcieport 0000:00:02.0: Signaling PME with IRQ 395 [ 3.397875] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.403514] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.434564] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b81000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 396 [ 3.444240] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.456627] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.464929] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.471537] [drm] No driver support for vblank timestamp query. [ 3.601445] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.848736] Console: switching to colour frame buffer device 512x135 [ 3.947329] drm drm: fb0: frame buffer device [ 3.951857] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.959556] iommu: Adding device cpufreq-dt.0 to group 73 [ 3.965340] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.972655] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.981879] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.989185] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:15 UTC (946684935) [ 3.998129] +USB0_VBUS_SW: disabling [ 4.001704] +1.8V_RUN_CAM: disabling [ 4.005543] +2.8V_RUN_CAM: disabling [ 4.009312] +1.2V_RUN_CAM_FRONT: disabling [ 4.013654] +1.05V_RUN_CAM_REAR: disabling [ 4.017894] +3.3V_RUN_TOUCH: disabling [ 4.021822] +2.8V_RUN_CAM_AF: disabling [ 4.025938] +1.8V_RUN_VPP_FUSE: disabling [ 4.031014] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.075334] EXT4-fs (mmcblk0p1): recovery complete [ 4.081368] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.089500] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.099578] devtmpfs: mounted [ 4.103302] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#