U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 3 MiB/s done Bytes transferred = 8167944 (7ca208 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.7 MiB/s done Bytes transferred = 68203 (10a6b hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7ca200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a6a Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc1-next-20170920-200864-g0b093a5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 19 21:51:39 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c158e380, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef81000 s39552 r8192 d21888 u69632 [ 0.000000] pcpu-alloc: s39552 r8192 d21888 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994376K/2097148K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 37236K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1596828 (1627 kB) [ 0.000000] .bss : 0xc159fbb4 - 0xc1605374 ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000017] Switching to timer-based delay loop, resolution 1000ns [ 0.001911] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001918] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001925] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001930] Switching to timer-based delay loop, resolution 83ns [ 0.002153] Console: colour dummy device 80x30 [ 0.002169] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002176] pid_max: default: 32768 minimum: 301 [ 0.002215] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002221] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002428] CPU: Testing write buffer coherency: ok [ 0.002552] /cpus/cpu@0 missing clock-frequency property [ 0.002568] /cpus/cpu@1 missing clock-frequency property [ 0.002583] /cpus/cpu@2 missing clock-frequency property [ 0.002599] /cpus/cpu@3 missing clock-frequency property [ 0.002604] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002726] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003454] Hierarchical SRCU implementation. [ 0.004163] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004444] EFI services will not be available. [ 0.004505] smp: Bringing up secondary CPUs ... [ 0.004736] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012127] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.022138] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031917] smp: Brought up 1 node, 4 CPUs [ 0.031926] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031929] CPU: All CPU(s) started in SVC mode. [ 0.032480] devtmpfs: initialized [ 0.037470] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.037665] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.037674] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038245] pinctrl core: initialized pinctrl subsystem [ 0.038871] DMI not present or invalid. [ 0.038977] NET: Registered protocol family 16 [ 0.039729] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040615] cpuidle: using governor menu [ 0.049118] No ATAGs? [ 0.049171] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.049178] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.051995] Serial: AMBA PL011 UART driver [ 0.052350] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.052459] iommu: Adding device reg-dummy to group 0 [ 0.052485] iommu: Adding device 50000000.host1x to group 1 [ 0.052510] iommu: Adding device 54200000.dc to group 2 [ 0.052533] iommu: Adding device 54240000.dc to group 3 [ 0.052546] iommu: Adding device 54280000.hdmi to group 4 [ 0.052557] iommu: Adding device 54540000.sor to group 5 [ 0.052570] iommu: Adding device 545c0000.dpaux to group 6 [ 0.052594] iommu: Adding device 57000000.gpu to group 7 [ 0.052606] iommu: Adding device 60005000.timer to group 8 [ 0.052616] iommu: Adding device 60007000.flow-controller to group 9 [ 0.052627] iommu: Adding device 6000c800.actmon to group 10 [ 0.052639] iommu: Adding device 6000d000.gpio to group 11 [ 0.052652] iommu: Adding device 60020000.dma to group 12 [ 0.052662] iommu: Adding device 70000800.apbmisc to group 13 [ 0.052674] iommu: Adding device 70000868.pinmux to group 14 [ 0.052685] iommu: Adding device 70006000.serial to group 15 [ 0.052698] iommu: Adding device 7000a000.pwm to group 16 [ 0.052709] iommu: Adding device 7000c000.i2c to group 17 [ 0.052720] iommu: Adding device 7000c400.i2c to group 18 [ 0.052731] iommu: Adding device 7000c500.i2c to group 19 [ 0.052744] iommu: Adding device 7000c700.i2c to group 20 [ 0.052755] iommu: Adding device 7000d000.i2c to group 21 [ 0.052768] iommu: Adding device 7000d400.spi to group 22 [ 0.052778] iommu: Adding device 7000da00.spi to group 23 [ 0.052788] iommu: Adding device 7000e000.rtc to group 24 [ 0.052799] iommu: Adding device 7000e400.pmc to group 25 [ 0.052810] iommu: Adding device 7000f800.fuse to group 26 [ 0.052824] iommu: Adding device 70019000.memory-controller to group 27 [ 0.052835] iommu: Adding device 7001b000.emc to group 28 [ 0.052848] iommu: Adding device 70030000.hda to group 29 [ 0.052860] iommu: Adding device 70090000.usb to group 30 [ 0.052871] iommu: Adding device 7009f000.padctl to group 31 [ 0.052882] iommu: Adding device 700b0000.sdhci to group 32 [ 0.052894] iommu: Adding device 700b0400.sdhci to group 33 [ 0.052905] iommu: Adding device 700b0600.sdhci to group 34 [ 0.052916] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.052928] iommu: Adding device 70300000.ahub to group 36 [ 0.052940] iommu: Adding device pmu to group 37 [ 0.052953] iommu: Adding device timer to group 38 [ 0.052964] iommu: Adding device sdhci0_pwrseq to group 39 [ 0.052975] iommu: Adding device backlight to group 40 [ 0.052986] iommu: Adding device clocks to group 41 [ 0.052996] iommu: Adding device gpio-keys to group 42 [ 0.053007] iommu: Adding device regulators to group 43 [ 0.053018] iommu: Adding device regulators:regulator@0 to group 44 [ 0.053029] iommu: Adding device regulators:regulator@1 to group 45 [ 0.053042] iommu: Adding device regulators:regulator@2 to group 46 [ 0.053053] iommu: Adding device regulators:regulator@3 to group 47 [ 0.053066] iommu: Adding device regulators:regulator@4 to group 48 [ 0.053076] iommu: Adding device regulators:regulator@5 to group 49 [ 0.053087] iommu: Adding device regulators:regulator@6 to group 50 [ 0.053098] iommu: Adding device regulators:regulator@7 to group 51 [ 0.053109] iommu: Adding device regulators:regulator@8 to group 52 [ 0.053122] iommu: Adding device regulators:regulator@9 to group 53 [ 0.053135] iommu: Adding device regulators:regulator@10 to group 54 [ 0.053146] iommu: Adding device regulators:regulator@11 to group 55 [ 0.053156] iommu: Adding device regulators:regulator@12 to group 56 [ 0.053167] iommu: Adding device sound to group 57 [ 0.053178] iommu: Adding device gpio-restart to group 58 [ 0.053191] iommu: Adding device panel to group 59 [ 0.058324] AT91: Could not find identification node [ 0.058534] +5V_SYS: supplied by +VDD_MUX [ 0.058632] +3.3V_SYS: supplied by +VDD_MUX [ 0.058845] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.058850] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058884] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058889] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058923] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058927] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058961] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058966] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.059056] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.059061] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.059096] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.059100] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.060087] vgaarb: loaded [ 0.060345] SCSI subsystem initialized [ 0.060415] libata version 3.00 loaded. [ 0.060491] usbcore: registered new interface driver usbfs [ 0.060507] usbcore: registered new interface driver hub [ 0.060534] usbcore: registered new device driver usb [ 0.061817] pps_core: LinuxPPS API ver. 1 registered [ 0.061821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.061829] PTP clock support registered [ 0.061895] EDAC MC: Ver: 3.0.0 [ 0.062016] dmi: Firmware registration failed. [ 0.062314] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.062324] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062749] clocksource: Switched to clocksource arch_sys_counter [ 0.082087] NET: Registered protocol family 2 [ 0.082281] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.082315] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.082378] TCP: Hash tables configured (established 8192 bind 8192) [ 0.082412] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.082427] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.082485] NET: Registered protocol family 1 [ 0.082638] RPC: Registered named UNIX socket transport module. [ 0.082643] RPC: Registered udp transport module. [ 0.082646] RPC: Registered tcp transport module. [ 0.082649] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.082654] PCI: CLS 0 bytes, default 64 [ 0.083245] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.083524] iommu: Adding device alarmtimer to group 60 [ 0.083882] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.085910] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.086126] NFS: Registering the id_resolver key type [ 0.086139] Key type id_resolver registered [ 0.086142] Key type id_legacy registered [ 0.086158] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.086678] bounce: pool size: 64 pages [ 0.086699] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.086704] io scheduler noop registered [ 0.086707] io scheduler deadline registered [ 0.086781] io scheduler cfq registered (default) [ 0.086785] io scheduler mq-deadline registered [ 0.086788] io scheduler kyber registered [ 0.088055] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.098548] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.099609] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.116459] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.116504] iommu: Adding device serial8250 to group 61 [ 0.117524] console [ttyS0] disabled [ 0.117541] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.366472] console [ttyS0] enabled [ 1.370255] SuperH (H)SCI(F) driver initialized [ 1.375146] msm_serial: driver initialized [ 1.379291] STMicroelectronics ASC driver initialized [ 1.386668] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.393220] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.400639] panel-simple panel: panel supply power not found, using dummy regulator [ 1.410942] brd: module loaded [ 1.416222] loop: module loaded [ 1.420264] as3722 4-0040: AS3722 with revision 0x1 found [ 1.426789] iommu: Adding device as3722-pinctrl to group 62 [ 1.433680] iommu: Adding device as3722-regulator to group 63 [ 1.441528] as3722-sd2: supplied by +5V_SYS [ 1.445986] as3722-sd3: supplied by +5V_SYS [ 1.450315] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.456486] as3722-sd4: supplied by +5V_SYS [ 1.460816] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.466554] as3722-sd5: supplied by +5V_SYS [ 1.472100] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.477825] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.483831] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.489424] as3722-ldo3: supplied by +3.3V_SYS [ 1.493877] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.501435] as3722-ldo4: supplied by +3.3V_SYS [ 1.506033] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.512032] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.516805] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.523483] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.529492] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.534271] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.540797] as3722-ldo9: supplied by +5V_SYS [ 1.545365] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.551549] as3722-ldo10: supplied by +5V_SYS [ 1.556059] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.562484] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.568978] iommu: Adding device as3722-rtc to group 64 [ 1.574339] iommu: Adding device as3722-adc to group 65 [ 1.579653] iommu: Adding device as3722-power-off to group 66 [ 1.585502] iommu: Adding device as3722-wdt to group 67 [ 1.602438] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.607932] iommu: Adding device Fixed MDIO bus.0 to group 68 [ 1.613817] libphy: Fixed MDIO Bus: probed [ 1.618232] CAN device driver interface [ 1.622368] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.628480] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.634305] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.640225] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.647174] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.653997] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.661394] usbcore: registered new interface driver pegasus [ 1.667064] usbcore: registered new interface driver asix [ 1.672458] usbcore: registered new interface driver ax88179_178a [ 1.678553] usbcore: registered new interface driver cdc_ether [ 1.684392] usbcore: registered new interface driver smsc75xx [ 1.690135] usbcore: registered new interface driver smsc95xx [ 1.695882] usbcore: registered new interface driver net1080 [ 1.701537] usbcore: registered new interface driver cdc_subset [ 1.707457] usbcore: registered new interface driver zaurus [ 1.713039] usbcore: registered new interface driver cdc_ncm [ 1.719341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.725861] ehci-pci: EHCI PCI platform driver [ 1.730302] ehci-platform: EHCI generic platform driver [ 1.735590] ehci-orion: EHCI orion driver [ 1.739640] SPEAr-ehci: EHCI SPEAr driver [ 1.743694] ehci-st: EHCI STMicroelectronics driver [ 1.748604] ehci-exynos: EHCI EXYNOS driver [ 1.752836] ehci-atmel: EHCI Atmel driver [ 1.756879] tegra-ehci: Tegra EHCI driver [ 1.760940] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.767114] ohci-pci: OHCI PCI platform driver [ 1.771557] ohci-platform: OHCI generic platform driver [ 1.776838] SPEAr-ohci: OHCI SPEAr driver [ 1.780881] ohci-st: OHCI STMicroelectronics driver [ 1.785799] ohci-atmel: OHCI Atmel driver [ 1.790047] usbcore: registered new interface driver usb-storage [ 1.797057] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.798721] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.798724] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.801017] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.801040] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.801302] i2c /dev entries driver [ 1.803109] IR NEC protocol handler initialized [ 1.803111] IR RC5(x/sz) protocol handler initialized [ 1.803113] IR RC6 protocol handler initialized [ 1.803115] IR JVC protocol handler initialized [ 1.803117] IR Sony protocol handler initialized [ 1.803119] IR SANYO protocol handler initialized [ 1.803120] IR Sharp protocol handler initialized [ 1.803122] IR MCE Keyboard/mouse protocol handler initialized [ 1.803124] IR XMP protocol handler initialized [ 1.804640] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.808701] iommu: Adding device cpufreq-tegra124 to group 69 [ 1.810021] sdhci: Secure Digital Host Controller Interface driver [ 1.810024] sdhci: Copyright(c) Pierre Ossman [ 1.810729] Synopsys Designware Multimedia Card Interface Driver [ 1.811344] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.811697] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.819904] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.819914] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.834931] mmc0: Unknown controller version (3). You may experience problems. [ 1.834970] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.892761] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.946656] ledtrig-cpu: registered to indicate activity on CPUs [ 1.952801] usbcore: registered new interface driver usbhid [ 1.958365] usbhid: USB HID core driver [ 1.963615] NET: Registered protocol family 10 [ 1.968370] Segment Routing with IPv6 [ 1.972061] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.978171] NET: Registered protocol family 17 [ 1.982604] can: controller area network core (rev 20170425 abi 9) [ 1.988803] NET: Registered protocol family 29 [ 1.993243] can: raw protocol (rev 20170425) [ 1.997500] can: broadcast manager protocol (rev 20170425 t) [ 2.003153] can: netlink gateway (rev 20170425) max_hops=1 [ 2.008737] Key type dns_resolver registered [ 2.013205] ThumbEE CPU extension supported. [ 2.017464] Registering SWP/SWPB emulation handler [ 2.027078] +3.3V_RUN: supplied by +3.3V_SYS [ 2.031807] +VDD_LED: supplied by +VDD_MUX [ 2.036174] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.041777] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 2.046471] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.051178] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 2.056592] +5V_VDD_TS_SW: supplied by +5V_SYS [ 2.061276] +5V_USB_HS: supplied by +5V_SYS [ 2.065896] +5V_USB_SS: supplied by +5V_SYS [ 2.070675] +3.3V_PANEL: supplied by +3.3V_RUN [ 2.075973] +3.3V_LP0: supplied by +3.3V_SYS [ 2.080702] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.086744] elan_i2c 1-0015: fetching report descriptor failed.: -121 [ 2.086790] +5V_HDMI_CON: supplied by +5V_SYS [ 2.087667] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.087729] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 2.087814] mmc0: new high speed MMC card at address 0001 [ 2.088059] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 2.088340] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 2.088598] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 2.090173] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 2.092715] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.093935] panel-simple panel: panel supply power not found, using dummy regulator [ 2.095831] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.099892] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.102932] mmc1: Unknown controller version (3). You may experience problems. [ 2.103042] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.103429] mmc1: Switching to 3.3V signalling voltage failed [ 2.162884] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.164068] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.164080] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.172587] mmc2: Unknown controller version (3). You may experience problems. [ 2.172643] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.200392] mmc1: new high speed SDIO card at address 0001 [ 2.218367] elan_i2c 1-0015: device initialize failed: -121 [ 2.233089] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.336545] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.343180] [drm] No driver support for vblank timestamp query. [ 2.383420] mmc2: new high speed SDHC card at address 0007 [ 2.383736] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.393183] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.393187] GPT:3014591 != 15564799 [ 2.393188] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.393189] GPT:3014591 != 15564799 [ 2.393191] GPT: Use GNU Parted to correct GPT errors. [ 2.393215] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.431614] Console: switching to colour frame buffer device 170x48 [ 2.446883] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 2.447367] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 2.513917] drm drm: fb0: frame buffer device [ 2.518413] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.525863] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.533237] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 16:54:50 UTC (946745690) [ 2.542182] +1.8V_RUN_CAM: disabling [ 2.545960] +3.3V_RUN_CAM: disabling [ 2.549634] +1.2V_RUN_CAM_FRONT: disabling [ 2.553891] +1.05V_RUN_CAM_REAR: disabling [ 2.558094] +2.8V_RUN_TOUCH: disabling [ 2.561942] +2.8V_RUN_CAM_AF: disabling [ 2.565936] +1.8V_RUN_VPP_FUSE: disabling [ 2.570059] +5V_VDD_TS_SW: disabling [ 2.573685] +5V_USB_HS: disabling [ 2.576999] +5V_USB_SS: disabling [ 2.581096] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.589782] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.874881] EXT4-fs (mmcblk0p3): recovery complete [ 2.880509] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.888656] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.896169] devtmpfs: mounted [ 2.899825] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#