U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) TEGRA114 Board: NVIDIA Dalmore I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra114 (Dalmore) # Tegra114 (Dalmore) # usb reset (Re)start USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash' Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################### 3 MiB/s done Bytes transferred = 8167944 (7ca208 hex) Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *### 3.3 MiB/s done Bytes transferred = 35036 (88dc hex) Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7ca200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff4000, end 8ffff8db ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-next-20170914-199953-g31fc38c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Wed Sep 13 20:52:32 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158eb80, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef98000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993476K/2096128K available (10240K kernel code, 1628K rwdata, 4508K rodata, 2048K init, 405K bss, 37116K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1597028 (1629 kB) [ 0.000000] .bss : 0xc15a0bc0 - 0xc160637c ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000028] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000045] Switching to timer-based delay loop, resolution 1000ns [ 0.003200] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.003219] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.003239] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.003253] Switching to timer-based delay loop, resolution 83ns [ 0.003669] Console: colour dummy device 80x30 [ 0.003703] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.003722] pid_max: default: 32768 minimum: 301 [ 0.003824] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003839] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004355] CPU: Testing write buffer coherency: ok [ 0.004598] /cpus/cpu@0 missing clock-frequency property [ 0.004630] /cpus/cpu@1 missing clock-frequency property [ 0.004662] /cpus/cpu@2 missing clock-frequency property [ 0.004695] /cpus/cpu@3 missing clock-frequency property [ 0.004709] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005013] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.006264] Hierarchical SRCU implementation. [ 0.007614] Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0 [ 0.008265] EFI services will not be available. [ 0.008418] smp: Bringing up secondary CPUs ... [ 0.008922] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009497] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010073] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010163] smp: Brought up 1 node, 4 CPUs [ 0.010186] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.010195] CPU: All CPU(s) started in SVC mode. [ 0.011695] devtmpfs: initialized [ 0.020999] Built 1 zonelists, mobility grouping on. Total pages: 514753 [ 0.021356] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.021696] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021716] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021902] pinctrl core: initialized pinctrl subsystem [ 0.023188] DMI not present or invalid. [ 0.023437] NET: Registered protocol family 16 [ 0.025457] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027547] cpuidle: using governor menu [ 0.049419] No ATAGs? [ 0.049552] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.049569] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.055005] Serial: AMBA PL011 UART driver [ 0.055755] tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered [ 0.055881] iommu: Adding device reg-dummy to group 0 [ 0.055918] iommu: Adding device 50000000.host1x to group 1 [ 0.055957] iommu: Adding device 54140000.gr2d to group 2 [ 0.055991] iommu: Adding device 54180000.gr3d to group 3 [ 0.056061] iommu: Adding device 54200000.dc to group 4 [ 0.056128] iommu: Adding device 54240000.dc to group 5 [ 0.056163] iommu: Adding device 54280000.hdmi to group 6 [ 0.056201] iommu: Adding device 54300000.dsi to group 7 [ 0.056234] iommu: Adding device 60005000.timer to group 8 [ 0.056271] iommu: Adding device 60007000.flow-controller to group 9 [ 0.056306] iommu: Adding device 6000a000.dma to group 10 [ 0.056338] iommu: Adding device 6000c000.ahb to group 11 [ 0.056371] iommu: Adding device 6000d000.gpio to group 12 [ 0.056403] iommu: Adding device 70000800.apbmisc to group 13 [ 0.056436] iommu: Adding device 70000868.pinmux to group 14 [ 0.056468] iommu: Adding device 70006300.serial to group 15 [ 0.056500] iommu: Adding device 7000a000.pwm to group 16 [ 0.056538] iommu: Adding device 7000c000.i2c to group 17 [ 0.056574] iommu: Adding device 7000c700.i2c to group 18 [ 0.056607] iommu: Adding device 7000d000.i2c to group 19 [ 0.056639] iommu: Adding device 7000da00.spi to group 20 [ 0.056672] iommu: Adding device 7000e000.rtc to group 21 [ 0.056706] iommu: Adding device 7000e400.pmc to group 22 [ 0.056738] iommu: Adding device 7000f800.fuse to group 23 [ 0.056771] iommu: Adding device 70019000.memory-controller to group 24 [ 0.056805] iommu: Adding device 70080000.ahub to group 25 [ 0.056842] iommu: Adding device 700e3000.mipi to group 26 [ 0.056878] iommu: Adding device 78000400.sdhci to group 27 [ 0.056915] iommu: Adding device 78000600.sdhci to group 28 [ 0.056947] iommu: Adding device 7d000000.usb to group 29 [ 0.056981] iommu: Adding device 7d000000.usb-phy to group 30 [ 0.057015] iommu: Adding device 7d008000.usb to group 31 [ 0.057049] iommu: Adding device 7d008000.usb-phy to group 32 [ 0.057081] iommu: Adding device timer to group 33 [ 0.057117] iommu: Adding device backlight to group 34 [ 0.057150] iommu: Adding device clocks to group 35 [ 0.057182] iommu: Adding device gpio-keys to group 36 [ 0.057216] iommu: Adding device regulators to group 37 [ 0.057249] iommu: Adding device regulators:regulator@0 to group 38 [ 0.057285] iommu: Adding device regulators:regulator@1 to group 39 [ 0.057319] iommu: Adding device regulators:regulator@3 to group 40 [ 0.057351] iommu: Adding device regulators:regulator@4 to group 41 [ 0.057384] iommu: Adding device regulators:regulator@5 to group 42 [ 0.057421] iommu: Adding device regulators:regulator@6 to group 43 [ 0.057456] iommu: Adding device regulators:regulator@7 to group 44 [ 0.057487] iommu: Adding device sound to group 45 [ 0.071446] AT91: Could not find identification node [ 0.071931] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.071953] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.072063] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.072079] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.072185] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.072199] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.072635] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.072650] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.075076] vgaarb: loaded [ 0.075768] SCSI subsystem initialized [ 0.075928] libata version 3.00 loaded. [ 0.076120] usbcore: registered new interface driver usbfs [ 0.076174] usbcore: registered new interface driver hub [ 0.076246] usbcore: registered new device driver usb [ 0.079496] tps65090 2-0048: No cache defaults, reading back from HW [ 0.080505] iommu: Adding device tps65090-pmic to group 46 [ 0.081459] TPS65090_RAILSDCDC1: supplied by vdd_ac_bat [ 0.082517] TPS65090_RAILSDCDC2: supplied by vdd_ac_bat [ 0.083578] TPS65090_RAILSDCDC3: supplied by vdd_ac_bat [ 0.084093] TPS65090_RAILSFET1: supplied by vdd_ac_bat [ 0.084463] TPS65090_RAILSFET2: supplied by vdd_ac_bat [ 0.084803] TPS65090_RAILSFET3: supplied by vdd-sys-3v3 [ 0.085312] TPS65090_RAILSFET4: supplied by vdd-sys-3v3 [ 0.085833] TPS65090_RAILSFET5: supplied by vdd-sys-3v3 [ 0.086345] TPS65090_RAILSFET6: supplied by vdd-sys-3v3 [ 0.087169] TPS65090_RAILSFET7: supplied by vdd-sys-3v3 [ 0.087685] TPS65090_RAILSLDO1: supplied by vdd_ac_bat [ 0.087876] TPS65090_RAILSLDO2: supplied by vdd_ac_bat [ 0.088200] iommu: Adding device tps65090-charger to group 47 [ 0.088805] palmas 2-0058: Irq flag is 0x00000004 [ 0.090756] palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0 [ 0.090996] iommu: Adding device 7000d000.i2c:tps65913@58:gpio to group 48 [ 0.091524] iommu: Adding device 7000d000.i2c:tps65913@58:pmic to group 49 [ 0.093398] SMPS12: supplied by vdd-ao [ 0.094391] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 0.095200] SMPS3: supplied by vdd-ao [ 0.096921] SMPS457: supplied by vdd-sys-3v3 [ 0.098539] SMPS6: supplied by regulator-dummy [ 0.099934] SMPS8: supplied by vdd-sys-3v3 [ 0.101505] SMPS9: supplied by vdd-sys-3v3 [ 0.102020] sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV [ 0.103458] SMPS10_OUT2: supplied by regulator-dummy [ 0.104283] SMPS10_OUT1: supplied by regulator-dummy [ 0.105125] LDO1: supplied by vdd-sys-3v3 [ 0.106221] LDO2: supplied by vdd-sys-3v3 [ 0.107333] LDO3: supplied by vddio-1v8 [ 0.108428] LDO4: supplied by vdd-sys-3v3 [ 0.109527] LDO5: supplied by vdd_ac_bat [ 0.110207] LDO6: supplied by vdd-sys-3v3 [ 0.110719] vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV [ 0.112032] LDO7: supplied by vdd-sys-3v3 [ 0.113658] LDO8: supplied by vdd-ao [ 0.114188] vdd-rtc: Bringing 675000uV into 900000-900000uV [ 0.123936] LDO9: supplied by sdhci-vdd-sd-slot [ 0.134254] LDOLN: supplied by vdd-sys-5v0 [ 0.135362] LDOUSB: supplied by vdd-sys-5v0 [ 0.145686] iommu: Adding device 7000d000.i2c:tps65913@58:rtc to group 50 [ 0.146104] iommu: Adding device 7000d000.i2c:tps65913@58:pinmux to group 51 [ 0.146684] pps_core: LinuxPPS API ver. 1 registered [ 0.146695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.146717] PTP clock support registered [ 0.146902] EDAC MC: Ver: 3.0.0 [ 0.147202] dmi: Firmware registration failed. [ 0.149017] clocksource: Switched to clocksource arch_sys_counter [ 0.205985] NET: Registered protocol family 2 [ 0.206489] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.206589] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.206777] TCP: Hash tables configured (established 8192 bind 8192) [ 0.206862] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.206907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.207068] NET: Registered protocol family 1 [ 0.207436] RPC: Registered named UNIX socket transport module. [ 0.207447] RPC: Registered udp transport module. [ 0.207456] RPC: Registered tcp transport module. [ 0.207465] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.207478] PCI: CLS 0 bytes, default 64 [ 0.208927] iommu: Adding device alarmtimer to group 52 [ 0.209805] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.215814] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.216390] NFS: Registering the id_resolver key type [ 0.216418] Key type id_resolver registered [ 0.216427] Key type id_legacy registered [ 0.216470] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.217858] bounce: pool size: 64 pages [ 0.217907] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.217919] io scheduler noop registered [ 0.217929] io scheduler deadline registered [ 0.218147] io scheduler cfq registered (default) [ 0.218158] io scheduler mq-deadline registered [ 0.218168] io scheduler kyber registered [ 0.249577] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.252290] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.303574] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.303677] iommu: Adding device serial8250 to group 53 [ 0.306259] console [ttyS0] disabled [ 0.306302] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra [ 1.629038] console [ttyS0] enabled [ 1.633301] SuperH (H)SCI(F) driver initialized [ 1.638808] msm_serial: driver initialized [ 1.643103] STMicroelectronics ASC driver initialized [ 1.654059] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.675894] brd: module loaded [ 1.685225] loop: module loaded [ 1.705481] m25p80 spi0.0: w25q32dw (4096 Kbytes) [ 1.712376] iommu: Adding device Fixed MDIO bus.0 to group 54 [ 1.718544] libphy: Fixed MDIO Bus: probed [ 1.723616] CAN device driver interface [ 1.728262] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.735247] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.741085] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.747047] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.754016] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.762955] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.770402] usbcore: registered new interface driver pegasus [ 1.776093] usbcore: registered new interface driver asix [ 1.781533] usbcore: registered new interface driver ax88179_178a [ 1.787645] usbcore: registered new interface driver cdc_ether [ 1.793530] usbcore: registered new interface driver smsc75xx [ 1.799324] usbcore: registered new interface driver smsc95xx [ 1.805089] usbcore: registered new interface driver net1080 [ 1.810787] usbcore: registered new interface driver cdc_subset [ 1.816728] usbcore: registered new interface driver zaurus [ 1.822353] usbcore: registered new interface driver cdc_ncm [ 1.828231] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.835614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.842149] ehci-pci: EHCI PCI platform driver [ 1.846619] ehci-platform: EHCI generic platform driver [ 1.852038] ehci-orion: EHCI orion driver [ 1.856185] SPEAr-ehci: EHCI SPEAr driver [ 1.860336] ehci-st: EHCI STMicroelectronics driver [ 1.865334] ehci-exynos: EHCI EXYNOS driver [ 1.869679] ehci-atmel: EHCI Atmel driver [ 1.873805] tegra-ehci: Tegra EHCI driver [ 1.878108] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.884305] ohci-pci: OHCI PCI platform driver [ 1.888778] ohci-platform: OHCI generic platform driver [ 1.894184] SPEAr-ohci: OHCI SPEAr driver [ 1.898313] ohci-st: OHCI STMicroelectronics driver [ 1.903325] ohci-atmel: OHCI Atmel driver [ 1.907991] usbcore: registered new interface driver usb-storage [ 1.917880] iommu: Adding device ci_hdrc.0 to group 55 [ 1.931609] palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps65913@58:rtc as rtc0 [ 1.943372] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.950566] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.957245] i2c /dev entries driver [ 1.964089] IR NEC protocol handler initialized [ 1.968615] IR RC5(x/sz) protocol handler initialized [ 1.973684] IR RC6 protocol handler initialized [ 1.978208] IR JVC protocol handler initialized [ 1.982749] IR Sony protocol handler initialized [ 1.987360] IR SANYO protocol handler initialized [ 1.992071] IR Sharp protocol handler initialized [ 1.996767] IR MCE Keyboard/mouse protocol handler initialized [ 2.002605] IR XMP protocol handler initialized [ 2.010269] sbs-battery 0-000b: sbs_probe: Failed to get device status [ 2.016802] sbs-battery: probe of 0-000b failed with error -121 [ 2.033011] sdhci: Secure Digital Host Controller Interface driver [ 2.039207] sdhci: Copyright(c) Pierre Ossman [ 2.045019] Synopsys Designware Multimedia Card Interface Driver [ 2.052226] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.058600] sdhci-tegra 78000400.sdhci: Got CD GPIO [ 2.063517] sdhci-tegra 78000400.sdhci: Got WP GPIO [ 2.076620] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.139165] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 2.155837] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.219060] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.228446] ledtrig-cpu: registered to indicate activity on CPUs [ 2.234833] usbcore: registered new interface driver usbhid [ 2.240419] usbhid: USB HID core driver [ 2.248054] NET: Registered protocol family 10 [ 2.253410] Segment Routing with IPv6 [ 2.257128] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.263586] NET: Registered protocol family 17 [ 2.268031] can: controller area network core (rev 20170425 abi 9) [ 2.274285] NET: Registered protocol family 29 [ 2.278725] can: raw protocol (rev 20170425) [ 2.283015] can: broadcast manager protocol (rev 20170425 t) [ 2.288674] can: netlink gateway (rev 20170425) max_hops=1 [ 2.294448] Key type dns_resolver registered [ 2.299248] ThumbEE CPU extension supported. [ 2.303519] Registering SWP/SWPB emulation handler [ 2.322034] usb1_vbus: supplied by vdd-sys-5v0 [ 2.324871] mmc0: new high speed SDHC card at address aaaa [ 2.325578] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 2.337617] usb2_vbus: supplied by vdd-sys-5v0 [ 2.345188] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.355893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.356482] mmcblk0: p1 p2 p3 [ 2.365630] [drm] No driver support for vblank timestamp query. [ 2.375940] mmc1: new high speed MMC card at address 0001 [ 2.382077] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.386901] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.393181] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.399585] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.404205] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.468234] Console: switching to colour frame buffer device 240x75 [ 2.518000] drm drm: fb0: frame buffer device [ 2.522590] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.532652] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.538074] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.545948] alloc_contig_range: [fb84b, fb84c) PFNs busy [ 2.551544] alloc_contig_range: [fb850, fb851) PFNs busy [ 2.557035] alloc_contig_range: [fb851, fb852) PFNs busy [ 2.562543] alloc_contig_range: [fb852, fb853) PFNs busy [ 2.568096] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.573625] alloc_contig_range: [fb854, fb855) PFNs busy [ 2.579130] alloc_contig_range: [fb855, fb856) PFNs busy [ 2.584682] alloc_contig_range: [fb856, fb857) PFNs busy [ 2.590208] alloc_contig_range: [fb857, fb858) PFNs busy [ 2.595693] alloc_contig_range: [fb858, fb859) PFNs busy [ 3.664514] tegra-ehci 7d008000.usb: irq 340, io mem 0x7d008000 [ 3.699148] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.706171] hub 1-0:1.0: USB hub found [ 3.710037] hub 1-0:1.0: 1 port detected [ 3.715800] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.724808] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-05 10:47:45 UTC (949747665) [ 3.741085] dvdd_ts: disabling [ 3.744144] usb1_vbus: disabling [ 3.747380] vdd_cam_1v8_reg: disabling [ 3.752950] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 3.825463] EXT4-fs (mmcblk1p1): recovery complete [ 3.831990] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.840173] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 3.850864] devtmpfs: mounted [ 3.855696] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.089170] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.773095] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16