Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:44.959563504 -0700
+++ /tmp/foob	2017-09-11 21:41:44.959563504 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Sep 10 20:40:51 PDT 2017
+Linux version 4.13.0-next-20170912-317999-g0d71e2d4aa14 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Sep 11 21:39:37 PDT 2017
 Boot CPU: AArch64 Processor [411fd070]
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
@@ -116,7 +116,7 @@
 hw perfevents: enabled with armv8_pmuv3 PMU driver, 1 counters available
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.812:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.788:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -181,7 +181,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-09-11 03:41:26 UTC (1505101286)
+rtc-pl031 9010000.pl031: setting system clock to 2017-09-12 04:40:47 UTC (1505191247)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:44.983563606 -0700
+++ /tmp/foob	2017-09-11 21:41:44.987563624 -0700
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Sep 10 20:36:28 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Sep 11 21:34:26 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c158e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e2c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -86,7 +86,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993480K/2096128K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 37112K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993480K/2096128K available (10240K kernel code, 1625K rwdata, 4508K rodata, 2048K init, 405K bss, 37112K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -96,7 +96,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1596910   (1627 kB)
+      .data : 0xc1400000 - 0xc1596610   (1626 kB)
        .bss : 0xc159fbc0 - 0xc160537c   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -378,14 +378,14 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-mmc0: new high speed SDHC card at address aaaa
 usb1_vbus: supplied by vdd-sys-5v0
+mmc0: new high speed SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+ mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
- mmcblk0: p1 p2 p3
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
@@ -412,7 +412,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-02 10:32:03 UTC (949487523)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-03 11:27:35 UTC (949577255)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -424,5 +424,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.079399] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.069434] usb 1-1: new high-speed USB device number 2 using tegra-ehci
 asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.023563774 -0700
+++ /tmp/foob	2017-09-11 21:41:45.027563792 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -27,31 +27,39 @@
 Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash'
 Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.tegra_defconfig
+Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'zImage.tegra_defconfig'.
 Load address: 0x81000000
-Loading: *#################################################################
+Loading: *EHCI timed out on TD - token=0x8008d80
+T EHCI timed out on TD - token=0x8008d80
+T EHCI timed out on TD - token=0x8008d80
+T EHCI timed out on TD - token=0x8008d80
+T EHCI timed out on TD - token=0x8008d80
+T EHCI timed out on TD - token=0x8008d80
+T #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 3 MiB/s
+	 192.4 KiB/s
 done
-Bytes transferred = 6287232 (5fef80 hex)
+Bytes transferred = 6288104 (5ff2e8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
+Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 35036 (88dc hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5fef80 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ff2e8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8db ... OK
@@ -60,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Sep 10 20:36:12 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Sep 11 21:34:53 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -70,7 +78,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7b80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -84,7 +92,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1997500K/2096128K available (9216K kernel code, 779K rwdata, 2796K rodata, 1024K init, 300K bss, 33092K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997500K/2096128K available (9216K kernel code, 778K rwdata, 2796K rodata, 1024K init, 300K bss, 33092K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,7 +102,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2b48   ( 779 kB)
        .bss : 0xc0fcc52c - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -407,7 +415,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-02 10:29:36 UTC (949487376)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-03 11:30:39 UTC (949577439)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -421,4 +429,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.747939] usb 1-1: new high-spee
\ No newline at end of file
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.035563825 -0700
+++ /tmp/foob	2017-09-11 21:41:45.035563825 -0700
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 3.3 MiB/s
+	 3.7 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -44,7 +44,7 @@
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67173 (10665 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Sep 10 20:36:28 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Sep 11 21:34:26 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c158e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e2c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -81,7 +81,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993360K/2096128K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 37232K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993360K/2096128K available (10240K kernel code, 1625K rwdata, 4508K rodata, 2048K init, 405K bss, 37232K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,7 +91,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1596910   (1627 kB)
+      .data : 0xc1400000 - 0xc1596610   (1626 kB)
        .bss : 0xc159fbc0 - 0xc160537c   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -530,7 +530,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:12 UTC (946684932)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.043563858 -0700
+++ /tmp/foob	2017-09-11 21:41:45.047563876 -0700
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 3.3 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 6287232 (5fef80 hex)
+Bytes transferred = 6288104 (5ff2e8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3 MiB/s
+	 3.8 MiB/s
 done
 Bytes transferred = 67173 (10665 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5fef80 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ff2e8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013664
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Sep 10 20:36:12 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Sep 11 21:34:53 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -65,7 +65,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7b80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -79,7 +79,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1997380K/2096128K available (9216K kernel code, 779K rwdata, 2796K rodata, 1024K init, 300K bss, 33212K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997380K/2096128K available (9216K kernel code, 778K rwdata, 2796K rodata, 1024K init, 300K bss, 33212K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,7 +89,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2b48   ( 779 kB)
        .bss : 0xc0fcc52c - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -538,7 +538,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:11 UTC (946684931)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.051563893 -0700
+++ /tmp/foob	2017-09-11 21:41:45.055563909 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 3 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -52,7 +52,7 @@
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.3 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68203 (10a6b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Sep 10 20:36:28 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Sep 11 21:34:26 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c158e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e2c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -90,7 +90,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994376K/2097148K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 37236K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994376K/2097148K available (10240K kernel code, 1625K rwdata, 4508K rodata, 2048K init, 405K bss, 37236K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -100,7 +100,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1596910   (1627 kB)
+      .data : 0xc1400000 - 0xc1596610   (1626 kB)
        .bss : 0xc159fbc0 - 0xc160537c   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -414,11 +414,10 @@
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-elan_i2c 1-0015: failed to read report data: -121
-elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
+elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
@@ -447,7 +446,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 06:26:43 UTC (946708003)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.075563994 -0700
+++ /tmp/foob	2017-09-11 21:41:45.075563994 -0700
@@ -36,25 +36,25 @@
 Load address: 0x82000000
 Loading: *#################################################################
 	 #################################################################
-	 #####T T ############################################################
+	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 460.9 KiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 6287232 (5fef80 hex)
+Bytes transferred = 6288104 (5ff2e8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.8 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68203 (10a6b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5fef80 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ff2e8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a6a
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Sep 10 20:36:12 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Sep 11 21:34:53 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,7 +74,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7b80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -88,7 +88,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998396K/2097148K available (9216K kernel code, 779K rwdata, 2796K rodata, 1024K init, 300K bss, 33216K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1998396K/2097148K available (9216K kernel code, 778K rwdata, 2796K rodata, 1024K init, 300K bss, 33216K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,7 +98,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2b48   ( 779 kB)
        .bss : 0xc0fcc52c - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -309,185 +309,134 @@
 iommu: Adding device as3722-adc to group 66
 iommu: Adding device as3722-power-off to group 67
 iommu: Adding device as3722-wdt to group 68
-cros-ec-spi spi0.0: packet too long (249 bytes, expected 4)
-iommu: Adding device cros-ec-ctl.0.auto to group 69
-iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70
-iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71
-cros-ec-spi spi0.0: Chrome EC device registered
-m25p80 spi1.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 72
-libphy: Fixed MDIO Bus: probed
-CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
-igb: Copyright (c) 2007-2014 Intel Corporation.
-pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
-usbcore: registered new interface driver pegasus
-usbcore: registered new interface driver asix
-usbcore: registered new interface driver ax88179_178a
-usbcore: registered new interface driver cdc_ether
-usbcore: registered new interface driver smsc75xx
-usbcore: registered new interface driver smsc95xx
-usbcore: registered new interface driver net1080
-usbcore: registered new interface driver cdc_subset
-usbcore: registered new interface driver zaurus
-usbcore: registered new interface driver cdc_ncm
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-tegra-ehci: Tegra EHCI driver
-usbcore: registered new interface driver cdc_acm
-cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
-usbcore: registered new interface driver cdc_wdm
-usbcore: registered new interface driver usb-storage
-input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0
-as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 372
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
-tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
-i2c /dev entries driver
-IR NEC protocol handler initialized
-IR RC5(x/sz) protocol handler initialized
-IR RC6 protocol handler initialized
-IR JVC protocol handler initialized
-IR Sony protocol handler initialized
-IR SANYO protocol handler initialized
-IR Sharp protocol handler initialized
-IR MCE Keyboard/mouse protocol handler initialized
-IR XMP protocol handler initialized
-usbcore: registered new interface driver uvcvideo
-USB Video Class driver (1.1.1)
-gspca_main: v2.14.0 registered
-lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
-tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
-iommu: Adding device cpufreq-tegra124 to group 73
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc0: Unknown controller version (3). You may experience problems.
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-iommu: Adding device snd-soc-dummy to group 74
-iommu: Adding device 70301100.i2s to group 75
-tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
-max98090 0-0010: MAX98090 REVID=0x43
-max98090 0-0010: use default 2.8v micbias
-tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
-NET: Registered protocol family 10
-Segment Routing with IPv6
-mip6: Mobile IPv6
-sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
-NET: Registered protocol family 17
-NET: Registered protocol family 15
-can: controller area network core (rev 20170425 abi 9)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-NET: Registered protocol family 29
-can: raw protocol (rev 20170425)
-can: broadcast manager protocol (rev 20170425 t)
-can: netlink gateway (rev 20170425) max_hops=1
-Bluetooth: RFCOMM socket layer initialized
-Bluetooth: RFCOMM ver 1.11
-Bluetooth: BNEP (Ethernet Emulation) ver 1.3
-Bluetooth: BNEP socket layer initialized
-Bluetooth: HIDP (Human Interface Emulation) ver 1.2
-Bluetooth: HIDP socket layer initialized
-Key type dns_resolver registered
-Registering SWP/SWPB emulation handler
-+3.3V_RUN: supplied by +3.3V_SYS
-+VDD_LED: supplied by +VDD_MUX
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-+1.8V_RUN_CAM: supplied by +3.3V_RUN
-+VDDIO_SDMMC3: supplied by +3.3V_RUN
-+1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-+5V_VDD_TS_SW: supplied by +5V_SYS
-+5V_USB_HS: supplied by +5V_SYS
-+5V_USB_SS: supplied by +5V_SYS
-+3.3V_PANEL: supplied by +3.3V_RUN
-+3.3V_LP0: supplied by +3.3V_SYS
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-+5V_HDMI_CON: supplied by +5V_SYS
- usb3-0: usb3-0 supply vbus not found, using dummy regulator
- usb3-1: usb3-1 supply vbus not found, using dummy regulator
-tegra-sor 54540000.sor: failed to probe output: -517
-panel-simple panel: panel supply power not found, using dummy regulator
-tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
-tegra-xusb 70090000.usb: xHCI Host Controller
-tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1
-tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
-tegra-xusb 70090000.usb: irq 344, io mem 0x70090000
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 6 ports detected
-tegra-xusb 70090000.usb: xHCI Host Controller
-tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2
-usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 2 ports detected
-sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
-mmc1: Unknown controller version (3). You may experience problems.
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: Switching to 3.3V signalling voltage failed
-mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc2: Unknown controller version (3). You may experience problems.
-mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
-mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
-mmc2: new high speed SDHC card at address 0007
-mmcblk2: mmc2:0007 SD08G 7.42 GiB 
-GPT:Primary header alternate_lba != Alt. header my_lba
-GPT:3014591 != 15564799
-GPT:Primary header thinks Alt. header is not at the end of the disk.
-GPT:3014591 != 15564799
-GPT: Use GNU Parted to correct GPT errors.
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-Console: switching to colour frame buffer device 170x48
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:35 UTC (946684835)
-+1.8V_RUN_CAM: disabling
-+1.2V_RUN_CAM_FRONT: disabling
-+1.05V_RUN_CAM_REAR: disabling
-+2.8V_RUN_TOUCH: disabling
-+2.8V_RUN_CAM_AF: disabling
-+1.8V_RUN_VPP_FUSE: disabling
-+5V_VDD_TS_SW: disabling
-ALSA device list:
-  #0: tegra-hda at 0x70038000 irq 343
-  #1: GoogleNyanBig
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-alloc_contig_range: [fbc77, fbc78) PFNs busy
-alloc_contig_range: [fbc78, fbc79) PFNs busy
-alloc_contig_range: [fbc79, fbc7a) PFNs busy
-alloc_contig_range: [fbc7a, fbc7b) PFNs busy
-alloc_contig_range: [fbc7b, fbc7c) PFNs busy
-alloc_contig_range: [fbc7c, fbc7d) PFNs busy
-alloc_contig_range: [fbc7d, fbc7e) PFNs busy
-alloc_contig_range: [fbc7e, fbc7f) PFNs busy
-alloc_contig_range: [fbc7f, fbc80) PFNs busy
-alloc_contig_range: [fbca1, fbca2) PFNs busy
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-EXT4-fs (mmcblk0p3): recovery complete
-EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 179:3.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    3.588700] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+------------[ cut here ]------------
+kernel BUG at drivers/platform/chrome/cros_ec_proto.c:34!
+Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170912-199758-g0d71e2d #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+task: ee891740 task.stack: ee8a6000
+PC is at cros_ec_prepare_tx+0x168/0x16c
+LR is at cros_ec_pkt_xfer_spi+0x18/0x474
+pc : [<c06d6210>]    lr : [<c0543dd8>]    psr: 20000013
+sp : ee8a7bd8  ip : 00000000  fp : 00000000
+r10: c0543dc0  r9 : 00000000  r8 : eefe503c
+r7 : ee293000  r6 : ee293000  r5 : ee293000  r4 : ee249d90
+r3 : 0000ffff  r2 : 00000000  r1 : 0000ffff  r0 : ee249d90
+Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
+Control: 10c5387d  Table: 8000406a  DAC: 00000051
+Process swapper/0 (pid: 1, stack limit = 0xee8a6210)
+Stack: (0xee8a7bd8 to 0xee8a8000)
+7bc0:                                                       ee249d90 ee293000
+7be0: ee293090 c0543dd8 c097537c 00000004 ee8a7c5c ee8a7c5c ee295c00 00000000
+7c00: c059021c 00000000 00000008 00000008 00000000 ee8a7c14 ee8a7c14 00000000
+7c20: ee8a7c20 ee8a7c20 ee293050 ee293780 00000008 00000000 00000000 00000000
+7c40: c0e90c50 c02383d0 40002800 000003e0 eef8cc50 c023a840 002dc6c0 ee8a7bf0
+7c60: ee8a7bf0 00000000 c06d6040 005c5260 3b9aca00 000f4240 00000000 ee8a7ca8
+7c80: 00000001 00000501 c0543dc0 c0979c0c 00000000 ee2937c0 a0000013 c06d6040
+7ca0: ee293000 ee249d90 ee293000 ee295c00 ee293000 eefe503c 00000000 c0543dc0
+7cc0: 00000000 c06d5f9c 0000400b ee249d90 ee293000 ee295c00 0000000c eefe503c
+7ce0: c0ff7e7c c06d63b8 00000010 ee249d90 ee295c00 00000000 00000000 eefe503c
+7d00: c0f6af18 c0543864 ee8a7d14 ee295c00 00000000 00000001 ee295c00 ee249d90
+7d20: ee293090 c0543c14 00000000 00000000 00000000 000007d0 ee295c00 00000000
+7d40: c0f6af08 00000000 00000000 c0590c60 ee295c00 c1009204 c1009208 c051cb20
+7d60: 00000000 ee8a7d98 c051ccb0 00000001 c10091e0 00000000 00000000 c051b140
+7d80: ee9f7170 ee2385b8 ee295c00 ee295c34 c0f71bdc c051c860 ee295c00 00000001
+7da0: 00000000 ee295c00 ee295c00 c0f71bdc ee073000 c051bea4 ee295c00 00000000
+7dc0: ee295c08 c051a4e8 ee295c00 c0593b64 00000010 ee295c00 ee295c00 ee073000
+7de0: 00000000 eea8be10 eefe508c 00000001 00000000 c0590ab4 002dc6c0 ee073000
+7e00: eefe503c 00000000 ee295c00 c0592a50 00000000 014000c0 00000000 c059243c
+7e20: 00000063 002dc6c0 ee073000 ee293350 eea8be00 eea8be10 40000000 00000153
+7e40: 00000000 c0592f10 eefe4d2c ee073348 ee073000 eea8be00 eea8be10 c0593a9c
+7e60: 00000000 ee073348 ffffffed eea8be10 fffffdfb c0f7253c 00000000 00000000
+7e80: c0f7253c c051e410 c051e3c0 eea8be10 c1009204 c1009208 00000000 c051cb20
+7ea0: eea8be10 c0f7253c eea8be44 00000000 00000111 c0e6a83c c0e005a4 c051cc78
+7ec0: 00000000 c0f7253c c051cbcc c051b1dc ee8c955c eea1c934 c0f7253c ee28be80
+7ee0: c0f694c8 c051c078 c0c1c8e8 c0f7253c 00000006 c0f7253c 00000006 c0e380d0
+7f00: 00000000 c051d7f0 c051e068 c0e82c84 00000006 c0101b8c 00000000 c0cba2fc
+7f20: 00000100 efffcb45 c0cba2fc 00000111 efffcb53 c013e410 c0cb8da8 00000000
+7f40: 00000006 00000006 efffcb45 efffcb4a c0f0dcd0 efffcac0 00000006 c0e6a82c
+7f60: c0e82c84 00000006 c0e6a830 c0fcc540 00000111 c0e00da8 00000006 00000006
+7f80: 00000000 c0e005a4 00000000 c0973124 00000000 00000000 00000000 00000000
+7fa0: 00000000 c097312c 00000000 c0107ce0 00000000 00000000 00000000 00000000
+7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
+[<c06d6210>] (cros_ec_prepare_tx) from [<c0543dd8>] (cros_ec_pkt_xfer_spi+0x18/0x474)
+[<c0543dd8>] (cros_ec_pkt_xfer_spi) from [<c06d5f9c>] (send_command+0x20/0xd8)
+[<c06d5f9c>] (send_command) from [<c06d63b8>] (cros_ec_query_all+0x1a4/0x398)
+[<c06d63b8>] (cros_ec_query_all) from [<c0543864>] (cros_ec_register+0x94/0x21c)
+[<c0543864>] (cros_ec_register) from [<c0543c14>] (cros_ec_spi_probe+0x108/0x150)
+[<c0543c14>] (cros_ec_spi_probe) from [<c0590c60>] (spi_drv_probe+0x7c/0xa8)
+[<c0590c60>] (spi_drv_probe) from [<c051cb20>] (driver_probe_device+0x238/0x2e4)
+[<c051cb20>] (driver_probe_device) from [<c051b140>] (bus_for_each_drv+0x44/0x8c)
+[<c051b140>] (bus_for_each_drv) from [<c051c860>] (__device_attach+0x9c/0x100)
+[<c051c860>] (__device_attach) from [<c051bea4>] (bus_probe_device+0x84/0x8c)
+[<c051bea4>] (bus_probe_device) from [<c051a4e8>] (device_add+0x380/0x528)
+[<c051a4e8>] (device_add) from [<c0590ab4>] (spi_add_device+0x88/0x130)
+[<c0590ab4>] (spi_add_device) from [<c0592a50>] (spi_register_controller+0x428/0x8b4)
+[<c0592a50>] (spi_register_controller) from [<c0592f10>] (devm_spi_register_controller+0x34/0x70)
+[<c0592f10>] (devm_spi_register_controller) from [<c0593a9c>] (tegra_spi_probe+0x298/0x35c)
+[<c0593a9c>] (tegra_spi_probe) from [<c051e410>] (platform_drv_probe+0x50/0xb0)
+[<c051e410>] (platform_drv_probe) from [<c051cb20>] (driver_probe_device+0x238/0x2e4)
+[<c051cb20>] (driver_probe_device) from [<c051cc78>] (__driver_attach+0xac/0xb0)
+[<c051cc78>] (__driver_attach) from [<c051b1dc>] (bus_for_each_dev+0x54/0x88)
+[<c051b1dc>] (bus_for_each_dev) from [<c051c078>] (bus_add_driver+0xe4/0x1f0)
+[<c051c078>] (bus_add_driver) from [<c051d7f0>] (driver_register+0x78/0xf4)
+[<c051d7f0>] (driver_register) from [<c0101b8c>] (do_one_initcall+0x3c/0x168)
+[<c0101b8c>] (do_one_initcall) from [<c0e00da8>] (kernel_init_freeable+0x10c/0x1d0)
+[<c0e00da8>] (kernel_init_freeable) from [<c097312c>] (kernel_init+0x8/0x114)
+[<c097312c>] (kernel_init) from [<c0107ce0>] (ret_from_fork+0x14/0x34)
+Code: e2800008 e8bd8070 e7f001f2 e7f001f2 (e7f001f2) 
+---[ end trace 4e84febfbc04632e ]---
+Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
+
+CPU2: stopping
+CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D         4.13.0-next-20170912-199758-g0d71e2d #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c01110d0>] (unwind_backtrace) from [<c010c090>] (show_stack+0x10/0x14)
+[<c010c090>] (show_stack) from [<c095fa00>] (dump_stack+0x84/0xa4)
+[<c095fa00>] (dump_stack) from [<c010f61c>] (handle_IPI+0x18c/0x39c)
+[<c010f61c>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
+[<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
+Exception stack(0xee8e1f70 to 0xee8e1fb8)
+1f60:                                     00000001 00000000 ee8e1fc8 c011a380
+1f80: c0f03ccc c0f03c68 c0e8c378 c0f03cd8 c0fbd8a4 00000000 00000001 00000000
+1fa0: 2e11e000 ee8e1fc0 c0108758 c010875c 60000013 ffffffff
+[<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
+[<c010875c>] (arch_cpu_idle) from [<c0160ac8>] (do_idle+0x148/0x204)
+[<c0160ac8>] (do_idle) from [<c0160e0c>] (cpu_startup_entry+0x18/0x1c)
+[<c0160e0c>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+CPU1: stopping
+CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D         4.13.0-next-20170912-199758-g0d71e2d #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c01110d0>] (unwind_backtrace) from [<c010c090>] (show_stack+0x10/0x14)
+[<c010c090>] (show_stack) from [<c095fa00>] (dump_stack+0x84/0xa4)
+[<c095fa00>] (dump_stack) from [<c010f61c>] (handle_IPI+0x18c/0x39c)
+[<c010f61c>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
+[<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
+Exception stack(0xee8dff70 to 0xee8dffb8)
+ff60:                                     00000001 00000000 ee8dffc8 c011a380
+ff80: c0f03ccc c0f03c68 c0e8c378 c0f03cd8 c0fbd8a4 00000000 00000001 00000000
+ffa0: 2e10d000 ee8dffc0 c0108758 c010875c 60000013 ffffffff
+[<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
+[<c010875c>] (arch_cpu_idle) from [<c0160ac8>] (do_idle+0x148/0x204)
+[<c0160ac8>] (do_idle) from [<c0160e0c>] (cpu_startup_entry+0x18/0x1c)
+[<c0160e0c>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+CPU3: stopping
+CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D         4.13.0-next-20170912-199758-g0d71e2d #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c01110d0>] (unwind_backtrace) from [<c010c090>] (show_stack+0x10/0x14)
+[<c010c090>] (show_stack) from [<c095fa00>] (dump_stack+0x84/0xa4)
+[<c095fa00>] (dump_stack) from [<c010f61c>] (handle_IPI+0x18c/0x39c)
+[<c010f61c>] (handle_IPI) from [<c0101430>] (gic_handle_irq+0x88/0x94)
+[<c0101430>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
+Exception stack(0xee8e3f70 to 0xee8e3fb8)
+3f60:                                     00000001 00000000 ee8e3fc8 c011a380
+3f80: c0f03ccc c0f03c68 c0e8c378 c0f03cd8 c0fbd8a4 00000000 00000001 00000000
+3fa0: 2e12f000 ee8e3fc0 c0108758 c010875c 60000013 ffffffff
+[<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
+[<c010875c>] (arch_cpu_idle) from [<c0160ac8>] (do_idle+0x148/0x204)
+[<c0160ac8>] (do_idle) from [<c0160e0c>] (cpu_startup_entry+0x18/0x1c)
+[<c0160e0c>] (cpu_startup_entry) from [<801018ac>] (0x801018ac)
+---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
+
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.083564027 -0700
+++ /tmp/foob	2017-09-11 21:41:45.083564027 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800687 us
+Bootloader-Cpu Init at (time stamp): 1801040 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800661  us
-Bootloader (AosInit) time: 733464 us
-Bootloader Main Init time: 180224 us
-BlockDevMgrInit time: 157502 us
+Miscellaneous avp time: 1801014  us
+Bootloader (AosInit) time: 734234 us
+Bootloader Main Init time: 180084 us
+BlockDevMgrInit time: 157525 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77162 us 
-Display init time: 574492 us
+Partition Table load: 76690 us 
+Display init time: 574794 us
 Kernel read time: 1340 msec
 Load Kernel Size:   17760256 Bytes
 Bl Kernel ReadSpeed: 13253000 Bytes/sec
-Pre-Kernel Jump time: 3827849 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 8784923 us
+Pre-Kernel Jump time: 3826762 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 8787989 us
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Sep 10 20:40:51 PDT 2017
+Linux version 4.13.0-next-20170912-317999-g0d71e2d4aa14 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Sep 11 21:39:37 PDT 2017
 Boot CPU: AArch64 Processor [4e0f0000]
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
@@ -202,7 +202,7 @@
 Freeing initrd memory: 1284K
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.983:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.979:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -281,6 +281,7 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
 hctosys: unable to open rtc device (rtc0)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
@@ -291,7 +292,6 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.099564094 -0700
+++ /tmp/foob	2017-09-11 21:41:45.103564111 -0700
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 3.3 MiB/s
+	 3.9 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -57,7 +57,7 @@
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 2.9 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Sep 10 20:36:28 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Sep 11 21:34:26 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c158e5c0, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c158e2c0, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -93,7 +93,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954308K/1048576K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 28732K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 954308K/1048576K available (10240K kernel code, 1625K rwdata, 4508K rodata, 2048K init, 405K bss, 28732K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -103,7 +103,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1596910   (1627 kB)
+      .data : 0xc1400000 - 0xc1596610   (1626 kB)
        .bss : 0xc159fbc0 - 0xc160537c   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
@@ -346,10 +346,10 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.127564213 -0700
+++ /tmp/foob	2017-09-11 21:41:45.131564230 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -46,20 +46,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 3.3 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6287232 (5fef80 hex)
+Bytes transferred = 6288104 (5ff2e8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 2.9 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5fef80 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ff2e8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103cd
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Sep 10 20:36:12 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Sep 11 21:34:53 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -77,7 +77,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0fb7b80, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -91,7 +91,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 958328K/1048576K available (9216K kernel code, 779K rwdata, 2796K rodata, 1024K init, 300K bss, 24712K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 958328K/1048576K available (9216K kernel code, 778K rwdata, 2796K rodata, 1024K init, 300K bss, 24712K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -101,7 +101,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2b48   ( 779 kB)
        .bss : 0xc0fcc52c - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -325,9 +325,9 @@
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20170425 abi 9)
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 NET: Registered protocol family 29
 can: raw protocol (rev 20170425)
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 can: broadcast manager protocol (rev 20170425 t)
 can: netlink gateway (rev 20170425) max_hops=1
 Bluetooth: RFCOMM socket layer initialized
@@ -339,12 +339,12 @@
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
 mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
- mmcblk1: p1 p2
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.155564331 -0700
+++ /tmp/foob	2017-09-11 21:41:45.155564331 -0700
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 745750 us
-Basic modules init took 348748 us
-Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14376 us
+Tegraboot started after 837495 us
+Basic modules init took 349254 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 14382 us
 Carveout took 252666 us
-CPU initialization took 92444 us
-Total time taken by TegraBoot 708234 us
+CPU initialization took 92435 us
+Total time taken by TegraBoot 708737 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.585] LPDDR4 Training: Number of tables = 10
+64b[0001.675] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-16439808 bytes read in 828 ms (18.9 MiB/s)
+16439808 bytes read in 835 ms (18.8 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 45170 bytes read in 454 ms (96.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 496 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Sep 10 20:40:51 PDT 2017
+Linux version 4.13.0-next-20170912-317999-g0d71e2d4aa14 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Sep 11 21:39:37 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.163564364 -0700
+++ /tmp/foob	2017-09-11 21:41:45.167564382 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Sep 10 20:40:51 PDT 2017
+Linux version 4.13.0-next-20170912-317999-g0d71e2d4aa14 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Sep 11 21:39:37 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
@@ -260,9 +260,8 @@
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
+max77686-rtc max77620-rtc: setting system clock to 2001-06-23 10:04:19 UTC (993290659)
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-06-22 09:04:59 UTC (993200699)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -270,11 +269,12 @@
 PP_LDO6: disabling
 PPLCD_VDD: disabling
 PP1800_LCDIO: disabling
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.171564398 -0700
+++ /tmp/foob	2017-09-11 21:41:45.175564415 -0700
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 2.9 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 51860 (ca94 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Sep 10 20:36:28 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Sep 11 21:34:26 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c158e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e2c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993400K/2096128K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 37192K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993400K/2096128K available (10240K kernel code, 1625K rwdata, 4508K rodata, 2048K init, 405K bss, 37192K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,7 +95,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1596910   (1627 kB)
+      .data : 0xc1400000 - 0xc1596610   (1626 kB)
        .bss : 0xc159fbc0 - 0xc160537c   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -474,4 +474,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.554429] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.544422] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-11 21:41:45.183564448 -0700
+++ /tmp/foob	2017-09-11 21:41:45.187564466 -0700
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 2.9 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6287232 (5fef80 hex)
+Bytes transferred = 6288104 (5ff2e8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51860 (ca94 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5fef80 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ff2e8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa93 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Sep 10 20:36:12 PDT 2017
+Linux version 4.13.0-next-20170912-199758-g0d71e2d (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Sep 11 21:34:53 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,7 +69,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7b80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1997420K/2096128K available (9216K kernel code, 779K rwdata, 2796K rodata, 1024K init, 300K bss, 33172K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997420K/2096128K available (9216K kernel code, 778K rwdata, 2796K rodata, 1024K init, 300K bss, 33172K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,7 +93,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2b48   ( 779 kB)
        .bss : 0xc0fcc52c - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -471,4 +471,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.804436] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.804442] usb 2-1: new high-speed USB device number 2 using tegra-ehci
