U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) TEGRA114 Board: NVIDIA Dalmore I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra114 (Dalmore) # Tegra114 (Dalmore) # usb reset (Re)start USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash' Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.1 MiB/s done Bytes transferred = 8159752 (7c8208 hex) Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *### 3.3 MiB/s done Bytes transferred = 35036 (88dc hex) Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff4000, end 8ffff8db ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-next-20170911-199739-ga31cc45 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Sep 10 20:36:28 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158e5c0, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef98000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993480K/2096128K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 37112K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1596910 (1627 kB) [ 0.000000] .bss : 0xc159fbc0 - 0xc160537c ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000028] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000044] Switching to timer-based delay loop, resolution 1000ns [ 0.003167] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.003187] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.003206] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.003221] Switching to timer-based delay loop, resolution 83ns [ 0.003636] Console: colour dummy device 80x30 [ 0.003672] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.003690] pid_max: default: 32768 minimum: 301 [ 0.003796] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003812] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004327] CPU: Testing write buffer coherency: ok [ 0.004570] /cpus/cpu@0 missing clock-frequency property [ 0.004602] /cpus/cpu@1 missing clock-frequency property [ 0.004634] /cpus/cpu@2 missing clock-frequency property [ 0.004666] /cpus/cpu@3 missing clock-frequency property [ 0.004679] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004988] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.006220] Hierarchical SRCU implementation. [ 0.007554] Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0 [ 0.008194] EFI services will not be available. [ 0.008348] smp: Bringing up secondary CPUs ... [ 0.008848] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009421] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010001] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010091] smp: Brought up 1 node, 4 CPUs [ 0.010113] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.010123] CPU: All CPU(s) started in SVC mode. [ 0.011625] devtmpfs: initialized [ 0.020596] Built 1 zonelists, mobility grouping on. Total pages: 514754 [ 0.020922] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.021261] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021281] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021466] pinctrl core: initialized pinctrl subsystem [ 0.022689] DMI not present or invalid. [ 0.022936] NET: Registered protocol family 16 [ 0.024966] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027018] cpuidle: using governor menu [ 0.048265] No ATAGs? [ 0.048395] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048412] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.053811] Serial: AMBA PL011 UART driver [ 0.054555] tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered [ 0.054681] iommu: Adding device reg-dummy to group 0 [ 0.054717] iommu: Adding device 50000000.host1x to group 1 [ 0.054756] iommu: Adding device 54140000.gr2d to group 2 [ 0.054790] iommu: Adding device 54180000.gr3d to group 3 [ 0.054857] iommu: Adding device 54200000.dc to group 4 [ 0.054922] iommu: Adding device 54240000.dc to group 5 [ 0.054956] iommu: Adding device 54280000.hdmi to group 6 [ 0.054994] iommu: Adding device 54300000.dsi to group 7 [ 0.055026] iommu: Adding device 60005000.timer to group 8 [ 0.055061] iommu: Adding device 60007000.flow-controller to group 9 [ 0.055093] iommu: Adding device 6000a000.dma to group 10 [ 0.055126] iommu: Adding device 6000c000.ahb to group 11 [ 0.055158] iommu: Adding device 6000d000.gpio to group 12 [ 0.055190] iommu: Adding device 70000800.apbmisc to group 13 [ 0.055221] iommu: Adding device 70000868.pinmux to group 14 [ 0.055253] iommu: Adding device 70006300.serial to group 15 [ 0.055285] iommu: Adding device 7000a000.pwm to group 16 [ 0.055321] iommu: Adding device 7000c000.i2c to group 17 [ 0.055358] iommu: Adding device 7000c700.i2c to group 18 [ 0.055391] iommu: Adding device 7000d000.i2c to group 19 [ 0.055423] iommu: Adding device 7000da00.spi to group 20 [ 0.055454] iommu: Adding device 7000e000.rtc to group 21 [ 0.055487] iommu: Adding device 7000e400.pmc to group 22 [ 0.055518] iommu: Adding device 7000f800.fuse to group 23 [ 0.055551] iommu: Adding device 70019000.memory-controller to group 24 [ 0.055583] iommu: Adding device 70080000.ahub to group 25 [ 0.055618] iommu: Adding device 700e3000.mipi to group 26 [ 0.055653] iommu: Adding device 78000400.sdhci to group 27 [ 0.055689] iommu: Adding device 78000600.sdhci to group 28 [ 0.055721] iommu: Adding device 7d000000.usb to group 29 [ 0.055754] iommu: Adding device 7d000000.usb-phy to group 30 [ 0.055788] iommu: Adding device 7d008000.usb to group 31 [ 0.055820] iommu: Adding device 7d008000.usb-phy to group 32 [ 0.055851] iommu: Adding device timer to group 33 [ 0.055887] iommu: Adding device backlight to group 34 [ 0.055918] iommu: Adding device clocks to group 35 [ 0.055949] iommu: Adding device gpio-keys to group 36 [ 0.055981] iommu: Adding device regulators to group 37 [ 0.056014] iommu: Adding device regulators:regulator@0 to group 38 [ 0.056050] iommu: Adding device regulators:regulator@1 to group 39 [ 0.056082] iommu: Adding device regulators:regulator@3 to group 40 [ 0.056115] iommu: Adding device regulators:regulator@4 to group 41 [ 0.056147] iommu: Adding device regulators:regulator@5 to group 42 [ 0.056182] iommu: Adding device regulators:regulator@6 to group 43 [ 0.056216] iommu: Adding device regulators:regulator@7 to group 44 [ 0.056247] iommu: Adding device sound to group 45 [ 0.070027] AT91: Could not find identification node [ 0.070501] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.070522] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.070629] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.070644] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.070746] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.070760] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.071182] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.071197] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.073591] vgaarb: loaded [ 0.074269] SCSI subsystem initialized [ 0.074444] libata version 3.00 loaded. [ 0.074634] usbcore: registered new interface driver usbfs [ 0.074685] usbcore: registered new interface driver hub [ 0.074759] usbcore: registered new device driver usb [ 0.077983] tps65090 2-0048: No cache defaults, reading back from HW [ 0.078987] iommu: Adding device tps65090-pmic to group 46 [ 0.079924] TPS65090_RAILSDCDC1: supplied by vdd_ac_bat [ 0.080981] TPS65090_RAILSDCDC2: supplied by vdd_ac_bat [ 0.082028] TPS65090_RAILSDCDC3: supplied by vdd_ac_bat [ 0.082539] TPS65090_RAILSFET1: supplied by vdd_ac_bat [ 0.082905] TPS65090_RAILSFET2: supplied by vdd_ac_bat [ 0.083244] TPS65090_RAILSFET3: supplied by vdd-sys-3v3 [ 0.083762] TPS65090_RAILSFET4: supplied by vdd-sys-3v3 [ 0.084281] TPS65090_RAILSFET5: supplied by vdd-sys-3v3 [ 0.084787] TPS65090_RAILSFET6: supplied by vdd-sys-3v3 [ 0.085619] TPS65090_RAILSFET7: supplied by vdd-sys-3v3 [ 0.086136] TPS65090_RAILSLDO1: supplied by vdd_ac_bat [ 0.086323] TPS65090_RAILSLDO2: supplied by vdd_ac_bat [ 0.086642] iommu: Adding device tps65090-charger to group 47 [ 0.087251] palmas 2-0058: Irq flag is 0x00000004 [ 0.089198] palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0 [ 0.089437] iommu: Adding device 7000d000.i2c:tps65913@58:gpio to group 48 [ 0.089956] iommu: Adding device 7000d000.i2c:tps65913@58:pmic to group 49 [ 0.091765] SMPS12: supplied by vdd-ao [ 0.092759] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 0.093601] SMPS3: supplied by vdd-ao [ 0.095331] SMPS457: supplied by vdd-sys-3v3 [ 0.096956] SMPS6: supplied by regulator-dummy [ 0.098350] SMPS8: supplied by vdd-sys-3v3 [ 0.099926] SMPS9: supplied by vdd-sys-3v3 [ 0.100446] sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV [ 0.101821] SMPS10_OUT2: supplied by regulator-dummy [ 0.102641] SMPS10_OUT1: supplied by regulator-dummy [ 0.103478] LDO1: supplied by vdd-sys-3v3 [ 0.104655] LDO2: supplied by vdd-sys-3v3 [ 0.105778] LDO3: supplied by vddio-1v8 [ 0.106876] LDO4: supplied by vdd-sys-3v3 [ 0.107976] LDO5: supplied by vdd_ac_bat [ 0.108655] LDO6: supplied by vdd-sys-3v3 [ 0.109170] vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV [ 0.110488] LDO7: supplied by vdd-sys-3v3 [ 0.112109] LDO8: supplied by vdd-ao [ 0.112640] vdd-rtc: Bringing 675000uV into 900000-900000uV [ 0.114223] LDO9: supplied by sdhci-vdd-sd-slot [ 0.124550] LDOLN: supplied by vdd-sys-5v0 [ 0.125663] LDOUSB: supplied by vdd-sys-5v0 [ 0.135982] iommu: Adding device 7000d000.i2c:tps65913@58:rtc to group 50 [ 0.136398] iommu: Adding device 7000d000.i2c:tps65913@58:pinmux to group 51 [ 0.136962] pps_core: LinuxPPS API ver. 1 registered [ 0.136972] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.136994] PTP clock support registered [ 0.137173] EDAC MC: Ver: 3.0.0 [ 0.137448] dmi: Firmware registration failed. [ 0.139228] clocksource: Switched to clocksource arch_sys_counter [ 0.195608] NET: Registered protocol family 2 [ 0.196106] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.196207] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.196395] TCP: Hash tables configured (established 8192 bind 8192) [ 0.196479] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.196524] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.196676] NET: Registered protocol family 1 [ 0.197016] RPC: Registered named UNIX socket transport module. [ 0.197028] RPC: Registered udp transport module. [ 0.197036] RPC: Registered tcp transport module. [ 0.197045] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.197059] PCI: CLS 0 bytes, default 64 [ 0.198498] iommu: Adding device alarmtimer to group 52 [ 0.199365] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.205210] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.205780] NFS: Registering the id_resolver key type [ 0.205806] Key type id_resolver registered [ 0.205816] Key type id_legacy registered [ 0.205859] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.207249] bounce: pool size: 64 pages [ 0.207297] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.207309] io scheduler noop registered [ 0.207319] io scheduler deadline registered [ 0.207532] io scheduler cfq registered (default) [ 0.207542] io scheduler mq-deadline registered [ 0.207552] io scheduler kyber registered [ 0.238613] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.241320] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.293491] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.293594] iommu: Adding device serial8250 to group 53 [ 0.296174] console [ttyS0] disabled [ 0.296214] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra [ 1.618953] console [ttyS0] enabled [ 1.623218] SuperH (H)SCI(F) driver initialized [ 1.628710] msm_serial: driver initialized [ 1.632996] STMicroelectronics ASC driver initialized [ 1.643899] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.665746] brd: module loaded [ 1.675001] loop: module loaded [ 1.695137] m25p80 spi0.0: w25q32dw (4096 Kbytes) [ 1.702013] iommu: Adding device Fixed MDIO bus.0 to group 54 [ 1.708177] libphy: Fixed MDIO Bus: probed [ 1.713301] CAN device driver interface [ 1.717948] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.724810] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.730652] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.736613] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.743576] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.752480] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.759922] usbcore: registered new interface driver pegasus [ 1.765616] usbcore: registered new interface driver asix [ 1.771059] usbcore: registered new interface driver ax88179_178a [ 1.777169] usbcore: registered new interface driver cdc_ether [ 1.783051] usbcore: registered new interface driver smsc75xx [ 1.788827] usbcore: registered new interface driver smsc95xx [ 1.794610] usbcore: registered new interface driver net1080 [ 1.800302] usbcore: registered new interface driver cdc_subset [ 1.806243] usbcore: registered new interface driver zaurus [ 1.811870] usbcore: registered new interface driver cdc_ncm [ 1.817741] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.825105] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.831646] ehci-pci: EHCI PCI platform driver [ 1.836116] ehci-platform: EHCI generic platform driver [ 1.841530] ehci-orion: EHCI orion driver [ 1.845673] SPEAr-ehci: EHCI SPEAr driver [ 1.849828] ehci-st: EHCI STMicroelectronics driver [ 1.854825] ehci-exynos: EHCI EXYNOS driver [ 1.859144] ehci-atmel: EHCI Atmel driver [ 1.863285] tegra-ehci: Tegra EHCI driver [ 1.867587] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.873788] ohci-pci: OHCI PCI platform driver [ 1.878258] ohci-platform: OHCI generic platform driver [ 1.883656] SPEAr-ohci: OHCI SPEAr driver [ 1.887786] ohci-st: OHCI STMicroelectronics driver [ 1.892806] ohci-atmel: OHCI Atmel driver [ 1.897466] usbcore: registered new interface driver usb-storage [ 1.907339] iommu: Adding device ci_hdrc.0 to group 55 [ 1.921145] palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps65913@58:rtc as rtc0 [ 1.932940] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.940135] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.946814] i2c /dev entries driver [ 1.953629] IR NEC protocol handler initialized [ 1.958154] IR RC5(x/sz) protocol handler initialized [ 1.963216] IR RC6 protocol handler initialized [ 1.967739] IR JVC protocol handler initialized [ 1.972274] IR Sony protocol handler initialized [ 1.976884] IR SANYO protocol handler initialized [ 1.981596] IR Sharp protocol handler initialized [ 1.986293] IR MCE Keyboard/mouse protocol handler initialized [ 1.992129] IR XMP protocol handler initialized [ 1.999780] sbs-battery 0-000b: sbs_probe: Failed to get device status [ 2.006314] sbs-battery: probe of 0-000b failed with error -121 [ 2.022495] sdhci: Secure Digital Host Controller Interface driver [ 2.028668] sdhci: Copyright(c) Pierre Ossman [ 2.034508] Synopsys Designware Multimedia Card Interface Driver [ 2.041717] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.048091] sdhci-tegra 78000400.sdhci: Got CD GPIO [ 2.053004] sdhci-tegra 78000400.sdhci: Got WP GPIO [ 2.066111] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.129377] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 2.146074] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.209271] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.218646] ledtrig-cpu: registered to indicate activity on CPUs [ 2.224984] usbcore: registered new interface driver usbhid [ 2.230567] usbhid: USB HID core driver [ 2.238179] NET: Registered protocol family 10 [ 2.243504] Segment Routing with IPv6 [ 2.247302] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.253780] NET: Registered protocol family 17 [ 2.258226] can: controller area network core (rev 20170425 abi 9) [ 2.264475] NET: Registered protocol family 29 [ 2.268913] can: raw protocol (rev 20170425) [ 2.273202] can: broadcast manager protocol (rev 20170425 t) [ 2.278859] can: netlink gateway (rev 20170425) max_hops=1 [ 2.284626] Key type dns_resolver registered [ 2.289421] ThumbEE CPU extension supported. [ 2.293693] Registering SWP/SWPB emulation handler [ 2.315329] mmc0: new high speed SDHC card at address aaaa [ 2.315459] usb1_vbus: supplied by vdd-sys-5v0 [ 2.316362] usb2_vbus: supplied by vdd-sys-5v0 [ 2.318058] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.335110] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 2.341640] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.348250] [drm] No driver support for vblank timestamp query. [ 2.363733] mmcblk0: p1 p2 p3 [ 2.372624] mmc1: new high speed MMC card at address 0001 [ 2.378555] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.383678] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.383994] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.384377] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.388971] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.452529] Console: switching to colour frame buffer device 240x75 [ 2.514252] drm drm: fb0: frame buffer device [ 2.518798] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.528495] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.533995] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.541878] alloc_contig_range: [fb84b, fb84c) PFNs busy [ 2.547367] alloc_contig_range: [fb850, fb851) PFNs busy [ 2.552888] alloc_contig_range: [fb851, fb852) PFNs busy [ 2.558375] alloc_contig_range: [fb852, fb853) PFNs busy [ 2.563881] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.569400] alloc_contig_range: [fb854, fb855) PFNs busy [ 2.574885] alloc_contig_range: [fb855, fb856) PFNs busy [ 2.580390] alloc_contig_range: [fb856, fb857) PFNs busy [ 2.585889] alloc_contig_range: [fb857, fb858) PFNs busy [ 2.591414] alloc_contig_range: [fb858, fb859) PFNs busy [ 3.657789] tegra-ehci 7d008000.usb: irq 340, io mem 0x7d008000 [ 3.689359] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.696370] hub 1-0:1.0: USB hub found [ 3.700271] hub 1-0:1.0: 1 port detected [ 3.705894] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.714602] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-02 10:32:03 UTC (949487523) [ 3.730055] dvdd_ts: disabling [ 3.733131] usb1_vbus: disabling [ 3.736356] vdd_cam_1v8_reg: disabling [ 3.742244] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 3.818548] EXT4-fs (mmcblk1p1): recovery complete [ 3.824991] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.833203] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 3.843707] devtmpfs: mounted [ 3.848602] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.079399] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.761722] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16