Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.497131242 -0700
+++ /tmp/foob	2017-09-05 23:28:34.497131242 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Sep 5 05:21:59 PDT 2017
+Linux version 4.13.0-next-20170906-317673-ge9fcbcd00963 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Sep 5 23:26:29 PDT 2017
 Boot CPU: AArch64 Processor [411fd070]
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
@@ -116,7 +116,7 @@
 hw perfevents: enabled with armv8_pmuv3 PMU driver, 1 counters available
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.820:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.804:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -181,7 +181,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-09-05 12:22:36 UTC (1504614156)
+rtc-pl031 9010000.pl031: setting system clock to 2017-09-06 06:27:34 UTC (1504679254)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.541131419 -0700
+++ /tmp/foob	2017-09-05 23:28:34.541131419 -0700
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 2.8 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35036 (88dc hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 05:18:29 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 23:20:54 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c158e580, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e440, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -86,7 +86,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993480K/2096128K available (10240K kernel code, 1626K rwdata, 4500K rodata, 2048K init, 405K bss, 37112K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993480K/2096128K available (10240K kernel code, 1625K rwdata, 4504K rodata, 2048K init, 405K bss, 37112K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -96,7 +96,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc15968d0   (1627 kB)
+      .data : 0xc1400000 - 0xc1596790   (1626 kB)
        .bss : 0xc159fbc0 - 0xc16052fc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -412,7 +412,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-27 19:15:49 UTC (949000549)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-28 13:13:49 UTC (949065229)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -424,5 +424,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.079519] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.099058] usb 1-1: new high-speed USB device number 2 using tegra-ehci
 asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.557131482 -0700
+++ /tmp/foob	2017-09-05 23:28:34.561131499 -0700
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 3.3 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 6288304 (5ff3b0 hex)
+Bytes transferred = 6288344 (5ff3d8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35036 (88dc hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ff3b0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ff3d8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8db ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 05:19:22 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 23:21:04 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -70,7 +70,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fb8000, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -94,7 +94,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2fc8   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
        .bss : 0xc0fcc538 - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -407,7 +407,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-27 19:13:15 UTC (949000395)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-28 13:16:18 UTC (949065378)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -421,4 +421,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.738712] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.597131643 -0700
+++ /tmp/foob	2017-09-05 23:28:34.601131659 -0700
@@ -28,14 +28,14 @@
 Load address: 0x82000000
 Loading: *#################################################################
 	 #################################################################
-	 ##########################################T T T #######################
+	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 461.9 KiB/s
+	 3.8 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 05:18:29 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 23:20:54 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c158e580, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e440, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -81,7 +81,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993360K/2096128K available (10240K kernel code, 1626K rwdata, 4500K rodata, 2048K init, 405K bss, 37232K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993360K/2096128K available (10240K kernel code, 1625K rwdata, 4504K rodata, 2048K init, 405K bss, 37232K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,7 +91,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc15968d0   (1627 kB)
+      .data : 0xc1400000 - 0xc1596790   (1626 kB)
        .bss : 0xc159fbc0 - 0xc16052fc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -530,7 +530,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:59 UTC (946684979)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.613131707 -0700
+++ /tmp/foob	2017-09-05 23:28:34.617131724 -0700
@@ -33,9 +33,9 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 3.7 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 6288304 (5ff3b0 hex)
+Bytes transferred = 6288344 (5ff3d8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 67173 (10665 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ff3b0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ff3d8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013664
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 05:19:22 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 23:21:04 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -65,7 +65,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fb8000, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -89,7 +89,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2fc8   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
        .bss : 0xc0fcc538 - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -538,7 +538,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:10 UTC (946684930)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.641131820 -0700
+++ /tmp/foob	2017-09-05 23:28:34.641131820 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 2.8 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -52,7 +52,7 @@
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 68203 (10a6b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 05:18:29 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 23:20:54 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c158e580, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e440, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -90,7 +90,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994376K/2097148K available (10240K kernel code, 1626K rwdata, 4500K rodata, 2048K init, 405K bss, 37236K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994376K/2097148K available (10240K kernel code, 1625K rwdata, 4504K rodata, 2048K init, 405K bss, 37236K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -100,7 +100,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc15968d0   (1627 kB)
+      .data : 0xc1400000 - 0xc1596790   (1626 kB)
        .bss : 0xc159fbc0 - 0xc16052fc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -447,7 +447,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 01:14:43 UTC (946689283)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 19:15:15 UTC (946754115)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.661131900 -0700
+++ /tmp/foob	2017-09-05 23:28:34.661131900 -0700
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 3 MiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 6288304 (5ff3b0 hex)
+Bytes transferred = 6288344 (5ff3d8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68203 (10a6b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5ff3b0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ff3d8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a6a
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 05:19:22 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 23:21:04 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,7 +74,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0fb8000, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -98,7 +98,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2fc8   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
        .bss : 0xc0fcc538 - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -380,7 +380,9 @@
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
 NET: Registered protocol family 10
 Segment Routing with IPv6
 mip6: Mobile IPv6
@@ -388,6 +390,7 @@
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20170425 abi 9)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 29
 can: raw protocol (rev 20170425)
 can: broadcast manager protocol (rev 20170425 t)
@@ -438,13 +441,12 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: new high speed SDIO card at address 0001
+mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -454,21 +456,10 @@
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Console: switching to colour frame buffer device 170x48
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input3
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 01:14:06 UTC (946689246)
-alloc_contig_range: [fbcb0, fbcc0) PFNs busy
-alloc_contig_range: [fbcc0, fbcd0) PFNs busy
-alloc_contig_range: [fbcd0, fbce0) PFNs busy
-alloc_contig_range: [fbce0, fbcf0) PFNs busy
-alloc_contig_range: [fbcf0, fbd00) PFNs busy
-alloc_contig_range: [fbd00, fbd10) PFNs busy
-alloc_contig_range: [fbd10, fbd20) PFNs busy
-alloc_contig_range: [fbd20, fbd30) PFNs busy
-alloc_contig_range: [fbd30, fbd40) PFNs busy
-alloc_contig_range: [fbd40, fbd50) PFNs busy
+input: gpio-keys as /devices/soc0/gpio-keys/input/input4
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 19:14:36 UTC (946754076)
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -477,16 +468,26 @@
 +1.8V_RUN_VPP_FUSE: disabling
 +5V_VDD_TS_SW: disabling
 ALSA device list:
+  #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+alloc_contig_range: [fbc77, fbc78) PFNs busy
+alloc_contig_range: [fbc78, fbc79) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc7a, fbc7b) PFNs busy
+alloc_contig_range: [fbc7b, fbc7c) PFNs busy
+alloc_contig_range: [fbc7c, fbc7d) PFNs busy
+alloc_contig_range: [fbc7d, fbc7e) PFNs busy
+alloc_contig_range: [fbc7e, fbc7f) PFNs busy
+alloc_contig_range: [fbc7f, fbc80) PFNs busy
+alloc_contig_range: [fbca1, fbca2) PFNs busy
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    3.588966] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.669131932 -0700
+++ /tmp/foob	2017-09-05 23:28:34.669131932 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801181 us
+Bootloader-Cpu Init at (time stamp): 1800794 us
 
 Pinmux changes applied in kernel way
 
@@ -59,25 +59,25 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 4 us
+Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801154  us
-Bootloader (AosInit) time: 733456 us
-Bootloader Main Init time: 180325 us
-BlockDevMgrInit time: 157532 us
-PartMgrInit time: 8 us
+Miscellaneous avp time: 1800768  us
+Bootloader (AosInit) time: 734254 us
+Bootloader Main Init time: 180094 us
+BlockDevMgrInit time: 157620 us
+PartMgrInit time: 7 us
 StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77078 us 
-Display init time: 574489 us
+Partition Table load: 76732 us 
+Display init time: 574713 us
 Kernel read time: 1346 msec
 Load Kernel Size:   17827840 Bytes
 Bl Kernel ReadSpeed: 13245000 Bytes/sec
-Pre-Kernel Jump time: 3840265 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 8804269 us
+Pre-Kernel Jump time: 3839424 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 8806652 us
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Sep 5 05:21:59 PDT 2017
+Linux version 4.13.0-next-20170906-317673-ge9fcbcd00963 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Sep 5 23:26:29 PDT 2017
 Boot CPU: AArch64 Processor [4e0f0000]
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
@@ -202,7 +202,7 @@
 Freeing initrd memory: 1284K
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.987:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.995:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -273,15 +273,14 @@
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +VDD_LED: supplied by +VDD_MUX
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
 hctosys: unable to open rtc device (rtc0)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
@@ -291,8 +290,9 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   No soundcards found.
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 Freeing unused kernel memory: 1152K
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.685131996 -0700
+++ /tmp/foob	2017-09-05 23:28:34.685131996 -0700
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 4 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 05:18:29 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 23:20:54 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c158e580, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c158e440, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -93,7 +93,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954308K/1048576K available (10240K kernel code, 1626K rwdata, 4500K rodata, 2048K init, 405K bss, 28732K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 954308K/1048576K available (10240K kernel code, 1625K rwdata, 4504K rodata, 2048K init, 405K bss, 28732K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -103,7 +103,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc15968d0   (1627 kB)
+      .data : 0xc1400000 - 0xc1596790   (1626 kB)
        .bss : 0xc159fbc0 - 0xc16052fc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.701132060 -0700
+++ /tmp/foob	2017-09-05 23:28:34.701132060 -0700
@@ -46,20 +46,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 3.9 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 6288304 (5ff3b0 hex)
+Bytes transferred = 6288344 (5ff3d8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 2.9 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5ff3b0 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ff3d8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103cd
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 05:19:22 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 23:21:04 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -77,7 +77,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0fb8000, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -101,7 +101,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2fc8   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
        .bss : 0xc0fcc538 - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -325,15 +325,12 @@
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20170425 abi 9)
-NET: Registered protocol family 29
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
+NET: Registered protocol family 29
 can: raw protocol (rev 20170425)
 can: broadcast manager protocol (rev 20170425 t)
 can: netlink gateway (rev 20170425) max_hops=1
 Bluetooth: RFCOMM socket layer initialized
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 Bluetooth: BNEP socket layer initialized
@@ -341,8 +338,11 @@
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
+ mmcblk1: p1 p2
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.717132125 -0700
+++ /tmp/foob	2017-09-05 23:28:34.721132141 -0700
@@ -1,7 +1,7 @@
 [TegraBoot] (version 23.00.2015.14-mobile-1ef66670)
 Processing in cold boot mode Bootloader 2
 A01Q Bootrom Patch rev = 3
-Power-up reason: on button
+Power-up reason: pmu watchdog
 No Battery Present
 Platform has Ddr4 type ram
 max77620 disabling SD1 Remote Sense
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 768027 us
-Basic modules init took 348571 us
+Tegraboot started after 725754 us
+Basic modules init took 350403 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14371 us
-Carveout took 252721 us
-CPU initialization took 92443 us
-Total time taken by TegraBoot 708106 us
+Next stage binary read took 14388 us
+Carveout took 252662 us
+CPU initialization took 92498 us
+Total time taken by TegraBoot 709951 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.606] LPDDR4 Training: Number of tables = 10
+64b[0001.567] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-16507392 bytes read in 836 ms (18.8 MiB/s)
+16507392 bytes read in 852 ms (18.5 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-45170 bytes read in 454 ms (96.7 KiB/s)
+45170 bytes read in 453 ms (96.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 496 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Sep 5 05:21:59 PDT 2017
+Linux version 4.13.0-next-20170906-317673-ge9fcbcd00963 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Sep 5 23:26:29 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.725132156 -0700
+++ /tmp/foob	2017-09-05 23:28:34.729132173 -0700
@@ -1,4 +1,108 @@
-bility grouping on.  Total pages: 713553
+Booting Linux on physical CPU 0x0
+Linux version 4.13.0-next-20170906-317673-ge9fcbcd00963 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Sep 5 23:26:29 PDT 2017
+Boot CPU: AArch64 Processor [411fd071]
+Machine model: Google Pixel C
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 16 MiB at 0x00000000f5400000
+earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
+bootconsole [uart0] enabled
+NUMA: No NUMA configuration found
+NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
+NUMA: NODE_DATA [mem 0x13ffa1c80-0x13ffa377f]
+Zone ranges:
+  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
+  Normal   [mem 0x0000000100000000-0x000000013fffffff]
+Movable zone start for each node
+Early memory node ranges
+  node   0: [mem 0x0000000080000000-0x00000000f65fffff]
+  node   0: [mem 0x0000000100000000-0x000000013fffffff]
+Initmem setup node 0 [mem 0x0000000080000000-0x000000013fffffff]
+psci: probing for conduit method from DT.
+psci: PSCIv1.0 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
+percpu: Embedded 23 pages/cpu @ffff8000bff42000 s55552 r8192 d30464 u94208
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists, mobility grouping on.  Total pages: 735336
+Policy zone: Normal
+Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
+PID hash table entries: 4096 (order: 3, 32768 bytes)
+software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
+Memory: 2837828K/2988032K available (9212K kernel code, 1144K rwdata, 4572K rodata, 1152K init, 404K bss, 133820K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff000008980000   (  9216 KB)
+    .rodata : 0xffff000008980000 - 0xffff000008e00000   (  4608 KB)
+      .init : 0xffff000008e00000 - 0xffff000008f20000   (  1152 KB)
+      .data : 0xffff000008f20000 - 0xffff00000903e200   (  1145 KB)
+       .bss : 0xffff00000903e200 - 0xffff0000090a3470   (   405 KB)
+    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
+    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Preemptible hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
+	Tasks RCU enabled.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+GIC: Using split EOI/Deactivate mode
+/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000
+boot misc0 0x0: expected 0x80000
+ (comparison mask = 0x400ffffb)
+boot misc2 0x1f720005: expected 0x1f720f05
+ (comparison mask = 0xffffff17)
+PLL_C already enabled. Postponing set full defaults
+boot misc0 0x0: expected 0x20
+ (comparison mask = 0x7ffffff)
+boot misc1 0x10000000: expected 0xc0000000
+ (comparison mask = 0xf8000000)
+boot misc2 0x0: expected 0xf400f0da
+ (comparison mask = 0xffffffff)
+boot misc3 0x0: expected 0x2004f400
+ (comparison mask = 0xffffffff)
+PLL_DP already enabled. Postponing set full defaults
+boot misc1 0x0: expected 0x20
+ (comparison mask = 0xffffff)
+PLL_X already enabled. Postponing set full defaults
+arch_timer: cp15 timer(s) running at 19.20MHz (phys).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
+sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
+Console: colour dummy device 80x25
+console [tty0] enabled
+bootconsole [uart0] disabled
+Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
+ASID allocator initialised with 65536 entries
+Hierarchical SRCU implementation.
+Speedo Revision 4
+random: fast init done
+Tegra Revision: A02 SKU: 19 CPU Process: 0 SoC Process: 0
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+Detected PIPT I-cache on CPU1
+CPU1: Booted secondary processor [411fd071]
+Detected PIPT I-cache on CPU2
+CPU2: Booted secondary processor [411fd071]
+Detected PIPT I-cache on CPU3
+CPU3: Booted secondary processor [411fd071]
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
+CPU: All CPU(s) started at EL2
+alternatives: patching kernel code
+devtmpfs: initialized
+Built 1 zonelists, mobility grouping on.  Total pages: 713553
 Policy zone: Normal
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 1024 (order: 5, 131072 bytes)
@@ -156,10 +260,8 @@
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2001-06-16 17:46:18 UTC (992713578)
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+max77686-rtc max77620-rtc: setting system clock to 2001-06-17 11:51:11 UTC (992778671)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -168,6 +270,8 @@
 PPLCD_VDD: disabling
 PP1800_LCDIO: disabling
 PP1800_CAM: disabling
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1152K
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.733132189 -0700
+++ /tmp/foob	2017-09-05 23:28:34.737132205 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra30 (Beaver) # 
 Tegra30 (Beaver) # usb reset
 (Re)start USB...
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ####################################
-	 3.1 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8159752 (7c8208 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.6 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51860 (ca94 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 05:18:29 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 23:20:54 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c158e580, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c158e440, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993400K/2096128K available (10240K kernel code, 1626K rwdata, 4500K rodata, 2048K init, 405K bss, 37192K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993400K/2096128K available (10240K kernel code, 1625K rwdata, 4504K rodata, 2048K init, 405K bss, 37192K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,7 +95,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc15968d0   (1627 kB)
+      .data : 0xc1400000 - 0xc1596790   (1626 kB)
        .bss : 0xc159fbc0 - 0xc16052fc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -474,4 +474,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.554426] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.554053] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-09-05 23:28:34.745132237 -0700
+++ /tmp/foob	2017-09-05 23:28:34.745132237 -0700
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################################
-	 1.9 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6288304 (5ff3b0 hex)
+Bytes transferred = 6288344 (5ff3d8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 51860 (ca94 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5ff3b0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ff3d8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa93 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 05:19:22 PDT 2017
+Linux version 4.13.0-next-20170906-199432-ge9fcbcd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Sep 5 23:21:04 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,7 +69,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fb8000, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0fb7e80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -93,7 +93,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0e00000 - 0xc0f00000   (1024 kB)
-      .data : 0xc0f00000 - 0xc0fc2fc8   ( 780 kB)
+      .data : 0xc0f00000 - 0xc0fc2e48   ( 780 kB)
        .bss : 0xc0fcc538 - 0xc10176bc   ( 301 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
@@ -471,4 +471,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.804448] usb 2-1: new high-speed USB device number 2 using tegra-ehci
\ No newline at end of file
+root@(none):/# [    4.804425] usb 2-1: new high-speed USB devic
\ No newline at end of file
