U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.1 MiB/s done Bytes transferred = 8159752 (7c8208 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 2.6 MiB/s done Bytes transferred = 51860 (ca94 hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffffa93 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 05:18:29 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158e580, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef88000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993400K/2096128K available (10240K kernel code, 1626K rwdata, 4500K rodata, 2048K init, 405K bss, 37192K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc15968d0 (1627 kB) [ 0.000000] .bss : 0xc159fbc0 - 0xc16052fc ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000012] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000030] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000038] Switching to timer-based delay loop, resolution 1000ns [ 0.002980] Console: colour dummy device 80x30 [ 0.003011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.003021] pid_max: default: 32768 minimum: 301 [ 0.003106] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003115] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003515] CPU: Testing write buffer coherency: ok [ 0.003819] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004044] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.005387] Hierarchical SRCU implementation. [ 0.006731] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.007300] EFI services will not be available. [ 0.007404] smp: Bringing up secondary CPUs ... [ 0.010376] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020353] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.030333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.030388] smp: Brought up 1 node, 4 CPUs [ 0.030400] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.030404] CPU: All CPU(s) started in SVC mode. [ 0.031119] devtmpfs: initialized [ 0.041427] Built 1 zonelists, mobility grouping on. Total pages: 514734 [ 0.041824] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.042462] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.042486] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.042710] pinctrl core: initialized pinctrl subsystem [ 0.043872] DMI not present or invalid. [ 0.044101] NET: Registered protocol family 16 [ 0.046888] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048662] cpuidle: using governor menu [ 0.061859] No ATAGs? [ 0.061958] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.061970] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.066214] Serial: AMBA PL011 UART driver [ 0.066689] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.066793] iommu: Adding device reg-dummy to group 0 [ 0.066827] iommu: Adding device 3000.pcie to group 1 [ 0.066847] iommu: Adding device 50000000.host1x to group 2 [ 0.066865] iommu: Adding device 54040000.mpe to group 3 [ 0.066884] iommu: Adding device 54080000.vi to group 4 [ 0.066902] iommu: Adding device 540c0000.epp to group 5 [ 0.066920] iommu: Adding device 54100000.isp to group 6 [ 0.066939] iommu: Adding device 54140000.gr2d to group 7 [ 0.066957] iommu: Adding device 54180000.gr3d to group 8 [ 0.067030] iommu: Adding device 54200000.dc to group 9 [ 0.067078] iommu: Adding device 54240000.dc to group 10 [ 0.067099] iommu: Adding device 54280000.hdmi to group 11 [ 0.067116] iommu: Adding device 50040600.timer to group 12 [ 0.067135] iommu: Adding device 50043000.cache-controller to group 13 [ 0.067152] iommu: Adding device 60005000.timer to group 14 [ 0.067169] iommu: Adding device 60007000.flow-controller to group 15 [ 0.067188] iommu: Adding device 6000a000.dma to group 16 [ 0.067210] iommu: Adding device 6000c000.ahb to group 17 [ 0.067229] iommu: Adding device 6000d000.gpio to group 18 [ 0.067246] iommu: Adding device 70000800.apbmisc to group 19 [ 0.067270] iommu: Adding device 70000868.pinmux to group 20 [ 0.067289] iommu: Adding device 70006000.serial to group 21 [ 0.067306] iommu: Adding device 7000e000.rtc to group 22 [ 0.067325] iommu: Adding device 7000c000.i2c to group 23 [ 0.067343] iommu: Adding device 7000c400.i2c to group 24 [ 0.067368] iommu: Adding device 7000c500.i2c to group 25 [ 0.067387] iommu: Adding device 7000c700.i2c to group 26 [ 0.067405] iommu: Adding device 7000d000.i2c to group 27 [ 0.067422] iommu: Adding device 7000da00.spi to group 28 [ 0.067441] iommu: Adding device 7000e400.pmc to group 29 [ 0.067460] iommu: Adding device 7000f000.memory-controller to group 30 [ 0.067484] iommu: Adding device 7000f800.fuse to group 31 [ 0.067507] iommu: Adding device 70080000.ahub to group 32 [ 0.067524] iommu: Adding device 78000000.sdhci to group 33 [ 0.067546] iommu: Adding device 78000600.sdhci to group 34 [ 0.067564] iommu: Adding device 7d000000.usb to group 35 [ 0.067582] iommu: Adding device 7d000000.usb-phy to group 36 [ 0.067600] iommu: Adding device 7d004000.usb to group 37 [ 0.067619] iommu: Adding device 7d004000.usb-phy to group 38 [ 0.067637] iommu: Adding device 7d008000.usb to group 39 [ 0.067655] iommu: Adding device 7d008000.usb-phy to group 40 [ 0.067672] iommu: Adding device pmu to group 41 [ 0.067699] iommu: Adding device clocks to group 42 [ 0.067716] iommu: Adding device gpio-leds to group 43 [ 0.067734] iommu: Adding device regulators to group 44 [ 0.067752] iommu: Adding device regulators:regulator@0 to group 45 [ 0.067771] iommu: Adding device regulators:regulator@1 to group 46 [ 0.067789] iommu: Adding device regulators:regulator@2 to group 47 [ 0.067806] iommu: Adding device regulators:regulator@3 to group 48 [ 0.067823] iommu: Adding device regulators:regulator@4 to group 49 [ 0.067840] iommu: Adding device regulators:regulator@5 to group 50 [ 0.067863] iommu: Adding device regulators:regulator@6 to group 51 [ 0.067887] iommu: Adding device regulators:regulator@7 to group 52 [ 0.067906] iommu: Adding device regulators:regulator@8 to group 53 [ 0.067924] iommu: Adding device sound to group 54 [ 0.076284] AT91: Could not find identification node [ 0.076798] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.076812] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.076860] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.076867] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.076916] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.076923] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.077024] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.077032] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.078822] vgaarb: loaded [ 0.079290] SCSI subsystem initialized [ 0.079425] libata version 3.00 loaded. [ 0.079552] usbcore: registered new interface driver usbfs [ 0.079588] usbcore: registered new interface driver hub [ 0.079624] usbcore: registered new device driver usb [ 0.083969] iommu: Adding device tps65910-gpio to group 55 [ 0.084247] iommu: Adding device tps65910-pmic to group 56 [ 0.086721] vrtc: supplied by vdd_5v_in [ 0.090008] vio: supplied by vdd_5v_in [ 0.101809] vdd1: supplied by vdd_5v_in [ 0.103168] vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV [ 0.111861] vdd2: supplied by vdd_5v_in [ 0.131803] ldo1: supplied by vdd_1v5_gen [ 0.134182] ldo2: supplied by vdd_1v5_gen [ 0.134653] vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV [ 0.136875] ldo3: supplied by vdd_5v_in [ 0.139221] ldo4: supplied by vdd_5v_in [ 0.141805] ldo5: supplied by vdd_5v_in [ 0.151807] ldo6: supplied by vdd_1v8_gen [ 0.152280] avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV [ 0.154513] ldo7: supplied by vdd_1v8_gen [ 0.161805] ldo8: supplied by vdd_1v8_gen [ 0.170078] iommu: Adding device tps65910-rtc to group 57 [ 0.170189] iommu: Adding device tps65910-power to group 58 [ 0.171968] pps_core: LinuxPPS API ver. 1 registered [ 0.171975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.171991] PTP clock support registered [ 0.172127] EDAC MC: Ver: 3.0.0 [ 0.172318] dmi: Firmware registration failed. [ 0.173628] clocksource: Switched to clocksource timer_us [ 0.206351] NET: Registered protocol family 2 [ 0.206757] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.206813] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.206898] TCP: Hash tables configured (established 8192 bind 8192) [ 0.207039] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.207108] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.207305] NET: Registered protocol family 1 [ 0.207638] RPC: Registered named UNIX socket transport module. [ 0.207646] RPC: Registered udp transport module. [ 0.207650] RPC: Registered tcp transport module. [ 0.207655] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.207664] PCI: CLS 0 bytes, default 64 [ 0.208510] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.208739] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.209229] iommu: Adding device alarmtimer to group 59 [ 0.209914] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.213170] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.213558] NFS: Registering the id_resolver key type [ 0.213595] Key type id_resolver registered [ 0.213599] Key type id_legacy registered [ 0.213688] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.214639] bounce: pool size: 64 pages [ 0.214676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.214685] io scheduler noop registered [ 0.214690] io scheduler deadline registered [ 0.214830] io scheduler cfq registered (default) [ 0.214836] io scheduler mq-deadline registered [ 0.214841] io scheduler kyber registered [ 0.221111] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.221127] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.221142] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.221151] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.221638] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.221684] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.222046] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.222059] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.222072] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.222115] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.222145] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.222176] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.222218] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.222736] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.222870] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.228166] tegra-pcie 3000.pcie: 2x3 configuration [ 0.228338] tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517 [ 0.233996] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.235915] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.264291] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.264377] iommu: Adding device serial8250 to group 60 [ 0.266417] console [ttyS0] disabled [ 0.266454] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.647294] console [ttyS0] enabled [ 1.651319] SuperH (H)SCI(F) driver initialized [ 1.656465] msm_serial: driver initialized [ 1.660661] STMicroelectronics ASC driver initialized [ 1.669647] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.682547] brd: module loaded [ 1.690939] loop: module loaded [ 1.699815] m25p80 spi0.1: w25q32 (4096 Kbytes) [ 1.705613] iommu: Adding device Fixed MDIO bus.0 to group 61 [ 1.711765] libphy: Fixed MDIO Bus: probed [ 1.716425] CAN device driver interface [ 1.720791] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.727274] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.733091] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.739037] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.745989] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.753596] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.761034] usbcore: registered new interface driver pegasus [ 1.766712] usbcore: registered new interface driver asix [ 1.772114] usbcore: registered new interface driver ax88179_178a [ 1.778216] usbcore: registered new interface driver cdc_ether [ 1.784073] usbcore: registered new interface driver smsc75xx [ 1.789827] usbcore: registered new interface driver smsc95xx [ 1.795583] usbcore: registered new interface driver net1080 [ 1.801243] usbcore: registered new interface driver cdc_subset [ 1.807174] usbcore: registered new interface driver zaurus [ 1.812761] usbcore: registered new interface driver cdc_ncm [ 1.818607] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.826353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.832865] ehci-pci: EHCI PCI platform driver [ 1.837328] ehci-platform: EHCI generic platform driver [ 1.842660] ehci-orion: EHCI orion driver [ 1.846762] SPEAr-ehci: EHCI SPEAr driver [ 1.850835] ehci-st: EHCI STMicroelectronics driver [ 1.855783] ehci-exynos: EHCI EXYNOS driver [ 1.860041] ehci-atmel: EHCI Atmel driver [ 1.864125] tegra-ehci: Tegra EHCI driver [ 1.868422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.874607] ohci-pci: OHCI PCI platform driver [ 1.879064] ohci-platform: OHCI generic platform driver [ 1.884403] SPEAr-ohci: OHCI SPEAr driver [ 1.888479] ohci-st: OHCI STMicroelectronics driver [ 1.893415] ohci-atmel: OHCI Atmel driver [ 1.897859] usbcore: registered new interface driver usb-storage [ 1.906126] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.912624] iommu: Adding device ci_hdrc.0 to group 62 [ 1.923268] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.930441] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.949190] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.956785] i2c /dev entries driver [ 1.962449] IR NEC protocol handler initialized [ 1.966982] IR RC5(x/sz) protocol handler initialized [ 1.972018] IR RC6 protocol handler initialized [ 1.976541] IR JVC protocol handler initialized [ 1.981057] IR Sony protocol handler initialized [ 1.985665] IR SANYO protocol handler initialized [ 1.990354] IR Sharp protocol handler initialized [ 1.995049] IR MCE Keyboard/mouse protocol handler initialized [ 2.000864] IR XMP protocol handler initialized [ 2.011456] sdhci: Secure Digital Host Controller Interface driver [ 2.017642] sdhci: Copyright(c) Pierre Ossman [ 2.022908] Synopsys Designware Multimedia Card Interface Driver [ 2.029663] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.035845] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 2.040719] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 2.053884] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.123722] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 2.140121] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.203647] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.212541] ledtrig-cpu: registered to indicate activity on CPUs [ 2.218829] usbcore: registered new interface driver usbhid [ 2.224400] usbhid: USB HID core driver [ 2.230631] NET: Registered protocol family 10 [ 2.235771] Segment Routing with IPv6 [ 2.239469] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.245776] NET: Registered protocol family 17 [ 2.250213] can: controller area network core (rev 20170425 abi 9) [ 2.256436] NET: Registered protocol family 29 [ 2.260866] can: raw protocol (rev 20170425) [ 2.265139] can: broadcast manager protocol (rev 20170425 t) [ 2.270786] can: netlink gateway (rev 20170425) max_hops=1 [ 2.276546] Key type dns_resolver registered [ 2.281182] ThumbEE CPU extension supported. [ 2.285464] Registering SWP/SWPB emulation handler [ 2.301047] vdd_ddr: supplied by vdd_5v_in [ 2.305978] vdd_5v_sata: supplied by vdd_5v_in [ 2.310755] usb1_vbus: supplied by vdd_5v_in [ 2.315341] usb3_vbus: supplied by vdd_5v_in [ 2.320839] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 2.326771] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 2.332278] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 2.337327] mmc1: new high speed MMC card at address 0001 [ 2.338099] mmcblk1: mmc1:0001 SEM16G 14.8 GiB [ 2.339003] mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 2.339563] mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 2.340466] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB [ 2.341263] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.341896] mmcblk0: mmc0:aaaa SS04G 3.69 GiB [ 2.353224] Primary GPT is invalid, using alternate GPT. [ 2.353241] mmcblk1: p1 p2 p3 p4 p5 [ 2.369814] mmcblk0: p1 p2 p3 [ 2.388821] tegra-pcie 3000.pcie: 2x3 configuration [ 2.396149] tegra-pcie 3000.pcie: probing port 0, using 2 lanes [ 2.460337] tegra-pcie 3000.pcie: probing port 2, using 2 lanes [ 2.870128] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.279202] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.688279] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.695504] tegra-pcie 3000.pcie: link 2 down, ignoring [ 3.700819] tegra-pcie 3000.pcie: PCI host bridge to bus 0000:00 [ 3.706833] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.712998] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.719865] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.727165] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.732660] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.738674] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.748316] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.757968] pci 0000:00:01.0: enabling Extended Tags [ 3.762920] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.772667] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.782417] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.789028] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.798891] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.808625] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.818265] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 3.827903] PCI: bus0: Fast back to back transfers disabled [ 3.833462] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.841454] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.851182] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.860988] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.867016] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.872589] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.879813] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.887096] pci 0000:01:00.0: supports D1 D2 [ 3.891353] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.923657] PCI: bus1: Fast back to back transfers disabled [ 3.929219] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.935850] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.943575] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.949666] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.957411] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.965153] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.971235] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.976194] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.982273] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.990022] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.997070] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 4.003344] pcieport 0000:00:01.0: Signaling PME with IRQ 375 [ 4.009342] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.014933] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 4.021637] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0a2a000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376 [ 4.031639] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.043907] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.050508] [drm] No driver support for vblank timestamp query. [ 4.056457] [drm] Cannot find any crtc or sizes [ 4.060991] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 4.070262] tegra-ehci 7d004000.usb: EHCI Host Controller [ 4.075687] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 4.083455] tegra-ehci 7d004000.usb: irq 344, io mem 0x7d004000 [ 4.089409] [drm] Cannot find any crtc or sizes [ 4.114026] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 4.121216] hub 1-0:1.0: USB hub found [ 4.124998] hub 1-0:1.0: 1 port detected [ 4.130142] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.135555] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.143296] tegra-ehci 7d008000.usb: irq 345, io mem 0x7d008000 [ 4.174023] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.181132] hub 2-0:1.0: USB hub found [ 4.184906] hub 2-0:1.0: 1 port detected [ 4.195247] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 4.204749] vdd_sata,avdd_plle: disabling [ 4.209492] usb1_vbus: disabling [ 4.215048] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 4.269447] EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended [ 4.280854] EXT4-fs (mmcblk1p1): recovery complete [ 4.288130] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.296249] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.314220] devtmpfs: mounted [ 4.319753] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.554426] usb 2-1: new high-speed USB device number 2 using tegra-ehci