U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) TEGRA114 Board: NVIDIA Dalmore I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra114 (Dalmore) # Tegra114 (Dalmore) # usb reset (Re)start USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash' Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 2.8 MiB/s done Bytes transferred = 8159752 (7c8208 hex) Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *### 2.6 MiB/s done Bytes transferred = 35036 (88dc hex) Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff4000, end 8ffff8db ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-next-20170905-199264-g744c56de (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Sep 5 05:18:29 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158e580, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef98000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993480K/2096128K available (10240K kernel code, 1626K rwdata, 4500K rodata, 2048K init, 405K bss, 37112K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc15968d0 (1627 kB) [ 0.000000] .bss : 0xc159fbc0 - 0xc16052fc ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000044] Switching to timer-based delay loop, resolution 1000ns [ 0.003110] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.003130] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.003150] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.003164] Switching to timer-based delay loop, resolution 83ns [ 0.003571] Console: colour dummy device 80x30 [ 0.003607] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.003626] pid_max: default: 32768 minimum: 301 [ 0.003729] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003745] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004260] CPU: Testing write buffer coherency: ok [ 0.004505] /cpus/cpu@0 missing clock-frequency property [ 0.004538] /cpus/cpu@1 missing clock-frequency property [ 0.004570] /cpus/cpu@2 missing clock-frequency property [ 0.004602] /cpus/cpu@3 missing clock-frequency property [ 0.004616] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004922] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.006163] Hierarchical SRCU implementation. [ 0.007516] Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0 [ 0.008159] EFI services will not be available. [ 0.008315] smp: Bringing up secondary CPUs ... [ 0.008821] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009398] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009974] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010063] smp: Brought up 1 node, 4 CPUs [ 0.010085] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.010095] CPU: All CPU(s) started in SVC mode. [ 0.011594] devtmpfs: initialized [ 0.020759] Built 1 zonelists, mobility grouping on. Total pages: 514754 [ 0.021084] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.021421] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021440] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021625] pinctrl core: initialized pinctrl subsystem [ 0.022847] DMI not present or invalid. [ 0.023128] NET: Registered protocol family 16 [ 0.025131] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027187] cpuidle: using governor menu [ 0.048347] No ATAGs? [ 0.048478] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048496] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.053934] Serial: AMBA PL011 UART driver [ 0.054687] tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered [ 0.054811] iommu: Adding device reg-dummy to group 0 [ 0.054847] iommu: Adding device 50000000.host1x to group 1 [ 0.054885] iommu: Adding device 54140000.gr2d to group 2 [ 0.054917] iommu: Adding device 54180000.gr3d to group 3 [ 0.054986] iommu: Adding device 54200000.dc to group 4 [ 0.055050] iommu: Adding device 54240000.dc to group 5 [ 0.055084] iommu: Adding device 54280000.hdmi to group 6 [ 0.055123] iommu: Adding device 54300000.dsi to group 7 [ 0.055156] iommu: Adding device 60005000.timer to group 8 [ 0.055192] iommu: Adding device 60007000.flow-controller to group 9 [ 0.055225] iommu: Adding device 6000a000.dma to group 10 [ 0.055257] iommu: Adding device 6000c000.ahb to group 11 [ 0.055291] iommu: Adding device 6000d000.gpio to group 12 [ 0.055322] iommu: Adding device 70000800.apbmisc to group 13 [ 0.055354] iommu: Adding device 70000868.pinmux to group 14 [ 0.055387] iommu: Adding device 70006300.serial to group 15 [ 0.055419] iommu: Adding device 7000a000.pwm to group 16 [ 0.055455] iommu: Adding device 7000c000.i2c to group 17 [ 0.055491] iommu: Adding device 7000c700.i2c to group 18 [ 0.055524] iommu: Adding device 7000d000.i2c to group 19 [ 0.055556] iommu: Adding device 7000da00.spi to group 20 [ 0.055587] iommu: Adding device 7000e000.rtc to group 21 [ 0.055619] iommu: Adding device 7000e400.pmc to group 22 [ 0.055651] iommu: Adding device 7000f800.fuse to group 23 [ 0.055684] iommu: Adding device 70019000.memory-controller to group 24 [ 0.055716] iommu: Adding device 70080000.ahub to group 25 [ 0.055752] iommu: Adding device 700e3000.mipi to group 26 [ 0.055788] iommu: Adding device 78000400.sdhci to group 27 [ 0.055825] iommu: Adding device 78000600.sdhci to group 28 [ 0.055857] iommu: Adding device 7d000000.usb to group 29 [ 0.055889] iommu: Adding device 7d000000.usb-phy to group 30 [ 0.055922] iommu: Adding device 7d008000.usb to group 31 [ 0.055955] iommu: Adding device 7d008000.usb-phy to group 32 [ 0.055987] iommu: Adding device timer to group 33 [ 0.056023] iommu: Adding device backlight to group 34 [ 0.056055] iommu: Adding device clocks to group 35 [ 0.056086] iommu: Adding device gpio-keys to group 36 [ 0.056118] iommu: Adding device regulators to group 37 [ 0.056150] iommu: Adding device regulators:regulator@0 to group 38 [ 0.056186] iommu: Adding device regulators:regulator@1 to group 39 [ 0.056219] iommu: Adding device regulators:regulator@3 to group 40 [ 0.056251] iommu: Adding device regulators:regulator@4 to group 41 [ 0.056282] iommu: Adding device regulators:regulator@5 to group 42 [ 0.056318] iommu: Adding device regulators:regulator@6 to group 43 [ 0.056351] iommu: Adding device regulators:regulator@7 to group 44 [ 0.056384] iommu: Adding device sound to group 45 [ 0.070077] AT91: Could not find identification node [ 0.070559] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.070581] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.070689] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.070705] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.070812] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.070826] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.071259] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.071274] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.073697] vgaarb: loaded [ 0.074378] SCSI subsystem initialized [ 0.074555] libata version 3.00 loaded. [ 0.074745] usbcore: registered new interface driver usbfs [ 0.074799] usbcore: registered new interface driver hub [ 0.074871] usbcore: registered new device driver usb [ 0.078122] tps65090 2-0048: No cache defaults, reading back from HW [ 0.079121] iommu: Adding device tps65090-pmic to group 46 [ 0.080078] TPS65090_RAILSDCDC1: supplied by vdd_ac_bat [ 0.081135] TPS65090_RAILSDCDC2: supplied by vdd_ac_bat [ 0.082182] TPS65090_RAILSDCDC3: supplied by vdd_ac_bat [ 0.082691] TPS65090_RAILSFET1: supplied by vdd_ac_bat [ 0.083058] TPS65090_RAILSFET2: supplied by vdd_ac_bat [ 0.083400] TPS65090_RAILSFET3: supplied by vdd-sys-3v3 [ 0.083938] TPS65090_RAILSFET4: supplied by vdd-sys-3v3 [ 0.084460] TPS65090_RAILSFET5: supplied by vdd-sys-3v3 [ 0.084966] TPS65090_RAILSFET6: supplied by vdd-sys-3v3 [ 0.085792] TPS65090_RAILSFET7: supplied by vdd-sys-3v3 [ 0.086311] TPS65090_RAILSLDO1: supplied by vdd_ac_bat [ 0.086494] TPS65090_RAILSLDO2: supplied by vdd_ac_bat [ 0.086811] iommu: Adding device tps65090-charger to group 47 [ 0.087409] palmas 2-0058: Irq flag is 0x00000004 [ 0.089347] palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0 [ 0.089584] iommu: Adding device 7000d000.i2c:tps65913@58:gpio to group 48 [ 0.090109] iommu: Adding device 7000d000.i2c:tps65913@58:pmic to group 49 [ 0.091937] SMPS12: supplied by vdd-ao [ 0.092927] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 0.093769] SMPS3: supplied by vdd-ao [ 0.095484] SMPS457: supplied by vdd-sys-3v3 [ 0.097101] SMPS6: supplied by regulator-dummy [ 0.098491] SMPS8: supplied by vdd-sys-3v3 [ 0.100059] SMPS9: supplied by vdd-sys-3v3 [ 0.100578] sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV [ 0.101948] SMPS10_OUT2: supplied by regulator-dummy [ 0.102765] SMPS10_OUT1: supplied by regulator-dummy [ 0.103600] LDO1: supplied by vdd-sys-3v3 [ 0.104773] LDO2: supplied by vdd-sys-3v3 [ 0.105886] LDO3: supplied by vddio-1v8 [ 0.106980] LDO4: supplied by vdd-sys-3v3 [ 0.108078] LDO5: supplied by vdd_ac_bat [ 0.108755] LDO6: supplied by vdd-sys-3v3 [ 0.109270] vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV [ 0.110583] LDO7: supplied by vdd-sys-3v3 [ 0.112200] LDO8: supplied by vdd-ao [ 0.112728] vdd-rtc: Bringing 675000uV into 900000-900000uV [ 0.114359] LDO9: supplied by sdhci-vdd-sd-slot [ 0.124681] LDOLN: supplied by vdd-sys-5v0 [ 0.125789] LDOUSB: supplied by vdd-sys-5v0 [ 0.136116] iommu: Adding device 7000d000.i2c:tps65913@58:rtc to group 50 [ 0.136530] iommu: Adding device 7000d000.i2c:tps65913@58:pinmux to group 51 [ 0.137093] pps_core: LinuxPPS API ver. 1 registered [ 0.137104] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.137126] PTP clock support registered [ 0.137309] EDAC MC: Ver: 3.0.0 [ 0.137584] dmi: Firmware registration failed. [ 0.139355] clocksource: Switched to clocksource arch_sys_counter [ 0.195886] NET: Registered protocol family 2 [ 0.196388] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.196490] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.196678] TCP: Hash tables configured (established 8192 bind 8192) [ 0.196761] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.196806] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.196961] NET: Registered protocol family 1 [ 0.197305] RPC: Registered named UNIX socket transport module. [ 0.197317] RPC: Registered udp transport module. [ 0.197326] RPC: Registered tcp transport module. [ 0.197335] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.197349] PCI: CLS 0 bytes, default 64 [ 0.198791] iommu: Adding device alarmtimer to group 52 [ 0.199650] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.205556] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.206131] NFS: Registering the id_resolver key type [ 0.206173] Key type id_resolver registered [ 0.206184] Key type id_legacy registered [ 0.206228] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.207621] bounce: pool size: 64 pages [ 0.207671] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.207683] io scheduler noop registered [ 0.207693] io scheduler deadline registered [ 0.207907] io scheduler cfq registered (default) [ 0.207919] io scheduler mq-deadline registered [ 0.207929] io scheduler kyber registered [ 0.239020] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.241614] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.292444] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.292545] iommu: Adding device serial8250 to group 53 [ 0.295116] console [ttyS0] disabled [ 0.295159] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra [ 1.617950] console [ttyS0] enabled [ 1.622226] SuperH (H)SCI(F) driver initialized [ 1.627720] msm_serial: driver initialized [ 1.632002] STMicroelectronics ASC driver initialized [ 1.642907] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.664692] brd: module loaded [ 1.673946] loop: module loaded [ 1.693986] m25p80 spi0.0: w25q32dw (4096 Kbytes) [ 1.700857] iommu: Adding device Fixed MDIO bus.0 to group 54 [ 1.707024] libphy: Fixed MDIO Bus: probed [ 1.712145] CAN device driver interface [ 1.716789] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.723654] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.729497] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.735459] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.742423] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.751341] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.758768] usbcore: registered new interface driver pegasus [ 1.764478] usbcore: registered new interface driver asix [ 1.769922] usbcore: registered new interface driver ax88179_178a [ 1.776034] usbcore: registered new interface driver cdc_ether [ 1.781914] usbcore: registered new interface driver smsc75xx [ 1.787691] usbcore: registered new interface driver smsc95xx [ 1.793475] usbcore: registered new interface driver net1080 [ 1.799151] usbcore: registered new interface driver cdc_subset [ 1.805109] usbcore: registered new interface driver zaurus [ 1.810738] usbcore: registered new interface driver cdc_ncm [ 1.816613] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.823985] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.830526] ehci-pci: EHCI PCI platform driver [ 1.834996] ehci-platform: EHCI generic platform driver [ 1.840412] ehci-orion: EHCI orion driver [ 1.844560] SPEAr-ehci: EHCI SPEAr driver [ 1.848696] ehci-st: EHCI STMicroelectronics driver [ 1.853714] ehci-exynos: EHCI EXYNOS driver [ 1.858034] ehci-atmel: EHCI Atmel driver [ 1.862176] tegra-ehci: Tegra EHCI driver [ 1.866479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.872680] ohci-pci: OHCI PCI platform driver [ 1.877152] ohci-platform: OHCI generic platform driver [ 1.882550] SPEAr-ohci: OHCI SPEAr driver [ 1.886682] ohci-st: OHCI STMicroelectronics driver [ 1.891702] ohci-atmel: OHCI Atmel driver [ 1.896364] usbcore: registered new interface driver usb-storage [ 1.906243] iommu: Adding device ci_hdrc.0 to group 55 [ 1.919998] palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps65913@58:rtc as rtc0 [ 1.931815] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.938982] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.945685] i2c /dev entries driver [ 1.952523] IR NEC protocol handler initialized [ 1.957048] IR RC5(x/sz) protocol handler initialized [ 1.962115] IR RC6 protocol handler initialized [ 1.966640] IR JVC protocol handler initialized [ 1.971177] IR Sony protocol handler initialized [ 1.975788] IR SANYO protocol handler initialized [ 1.980498] IR Sharp protocol handler initialized [ 1.985194] IR MCE Keyboard/mouse protocol handler initialized [ 1.991030] IR XMP protocol handler initialized [ 1.998656] sbs-battery 0-000b: sbs_probe: Failed to get device status [ 2.005210] sbs-battery: probe of 0-000b failed with error -121 [ 2.021352] sdhci: Secure Digital Host Controller Interface driver [ 2.027524] sdhci: Copyright(c) Pierre Ossman [ 2.033352] Synopsys Designware Multimedia Card Interface Driver [ 2.040559] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.046922] sdhci-tegra 78000400.sdhci: Got CD GPIO [ 2.051838] sdhci-tegra 78000400.sdhci: Got WP GPIO [ 2.064944] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.129508] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 2.146195] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.209399] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.218773] ledtrig-cpu: registered to indicate activity on CPUs [ 2.225158] usbcore: registered new interface driver usbhid [ 2.230744] usbhid: USB HID core driver [ 2.238234] NET: Registered protocol family 10 [ 2.243584] Segment Routing with IPv6 [ 2.247304] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.253768] NET: Registered protocol family 17 [ 2.258214] can: controller area network core (rev 20170425 abi 9) [ 2.264461] NET: Registered protocol family 29 [ 2.268901] can: raw protocol (rev 20170425) [ 2.273190] can: broadcast manager protocol (rev 20170425 t) [ 2.278847] can: netlink gateway (rev 20170425) max_hops=1 [ 2.284624] Key type dns_resolver registered [ 2.289423] ThumbEE CPU extension supported. [ 2.293695] Registering SWP/SWPB emulation handler [ 2.312317] usb1_vbus: supplied by vdd-sys-5v0 [ 2.315047] mmc0: new high speed SDHC card at address aaaa [ 2.315473] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 2.327767] usb2_vbus: supplied by vdd-sys-5v0 [ 2.335901] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.342544] mmcblk0: p1 p2 p3 [ 2.348694] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.355347] [drm] No driver support for vblank timestamp query. [ 2.366247] mmc1: new high speed MMC card at address 0001 [ 2.372303] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.377123] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.383343] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.389584] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.393863] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.457890] Console: switching to colour frame buffer device 240x75 [ 2.507664] drm drm: fb0: frame buffer device [ 2.512258] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.522300] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.527721] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.535612] alloc_contig_range: [fb84b, fb84c) PFNs busy [ 2.541206] alloc_contig_range: [fb850, fb851) PFNs busy [ 2.546698] alloc_contig_range: [fb851, fb852) PFNs busy [ 2.552219] alloc_contig_range: [fb852, fb853) PFNs busy [ 2.557770] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.563303] alloc_contig_range: [fb854, fb855) PFNs busy [ 2.568791] alloc_contig_range: [fb855, fb856) PFNs busy [ 2.574376] alloc_contig_range: [fb856, fb857) PFNs busy [ 2.579890] alloc_contig_range: [fb857, fb858) PFNs busy [ 2.585378] alloc_contig_range: [fb858, fb859) PFNs busy [ 3.667242] tegra-ehci 7d008000.usb: irq 340, io mem 0x7d008000 [ 3.699487] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.706552] hub 1-0:1.0: USB hub found [ 3.710419] hub 1-0:1.0: 1 port detected [ 3.716133] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.725150] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-27 19:15:49 UTC (949000549) [ 3.741128] dvdd_ts: disabling [ 3.744188] usb1_vbus: disabling [ 3.747413] vdd_cam_1v8_reg: disabling [ 3.752969] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 3.820617] EXT4-fs (mmcblk1p1): recovery complete [ 3.826748] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.834921] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 3.845776] devtmpfs: mounted [ 3.850665] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.079519] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.764078] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16