U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.3 MiB/s done Bytes transferred = 8151560 (7c6208 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 2.9 MiB/s done Bytes transferred = 51860 (ca94 hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7c6200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffffa93 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-rc7-next-20170901-198696-g1d53d90 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Fri Sep 1 00:05:43 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158e880, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef88000 s39552 r8192 d21888 u69632 [ 0.000000] pcpu-alloc: s39552 r8192 d21888 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993400K/2096128K available (10240K kernel code, 1626K rwdata, 4488K rodata, 2048K init, 405K bss, 37192K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1596bd0 (1627 kB) [ 0.000000] .bss : 0xc159fbc0 - 0xc16052fc ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000013] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000031] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000040] Switching to timer-based delay loop, resolution 1000ns [ 0.002954] Console: colour dummy device 80x30 [ 0.002985] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.002995] pid_max: default: 32768 minimum: 301 [ 0.003074] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003083] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003487] CPU: Testing write buffer coherency: ok [ 0.003786] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004011] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.005344] Hierarchical SRCU implementation. [ 0.006674] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.007238] EFI services will not be available. [ 0.007339] smp: Bringing up secondary CPUs ... [ 0.010384] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020351] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.030345] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.030397] smp: Brought up 1 node, 4 CPUs [ 0.030410] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.030415] CPU: All CPU(s) started in SVC mode. [ 0.031109] devtmpfs: initialized [ 0.041507] Built 1 zonelists, mobility grouping on. Total pages: 514734 [ 0.041914] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.042560] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.042591] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.042812] pinctrl core: initialized pinctrl subsystem [ 0.043974] DMI not present or invalid. [ 0.044209] NET: Registered protocol family 16 [ 0.046455] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048234] cpuidle: using governor menu [ 0.061747] No ATAGs? [ 0.061843] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.061855] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.066150] Serial: AMBA PL011 UART driver [ 0.066632] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.066733] iommu: Adding device reg-dummy to group 0 [ 0.066768] iommu: Adding device 3000.pcie to group 1 [ 0.066790] iommu: Adding device 50000000.host1x to group 2 [ 0.066808] iommu: Adding device 54040000.mpe to group 3 [ 0.066825] iommu: Adding device 54080000.vi to group 4 [ 0.066844] iommu: Adding device 540c0000.epp to group 5 [ 0.066863] iommu: Adding device 54100000.isp to group 6 [ 0.066880] iommu: Adding device 54140000.gr2d to group 7 [ 0.066898] iommu: Adding device 54180000.gr3d to group 8 [ 0.066968] iommu: Adding device 54200000.dc to group 9 [ 0.067019] iommu: Adding device 54240000.dc to group 10 [ 0.067040] iommu: Adding device 54280000.hdmi to group 11 [ 0.067059] iommu: Adding device 50040600.timer to group 12 [ 0.067077] iommu: Adding device 50043000.cache-controller to group 13 [ 0.067094] iommu: Adding device 60005000.timer to group 14 [ 0.067112] iommu: Adding device 60007000.flow-controller to group 15 [ 0.067131] iommu: Adding device 6000a000.dma to group 16 [ 0.067153] iommu: Adding device 6000c000.ahb to group 17 [ 0.067172] iommu: Adding device 6000d000.gpio to group 18 [ 0.067189] iommu: Adding device 70000800.apbmisc to group 19 [ 0.067213] iommu: Adding device 70000868.pinmux to group 20 [ 0.067232] iommu: Adding device 70006000.serial to group 21 [ 0.067249] iommu: Adding device 7000e000.rtc to group 22 [ 0.067268] iommu: Adding device 7000c000.i2c to group 23 [ 0.067287] iommu: Adding device 7000c400.i2c to group 24 [ 0.067310] iommu: Adding device 7000c500.i2c to group 25 [ 0.067330] iommu: Adding device 7000c700.i2c to group 26 [ 0.067348] iommu: Adding device 7000d000.i2c to group 27 [ 0.067367] iommu: Adding device 7000da00.spi to group 28 [ 0.067385] iommu: Adding device 7000e400.pmc to group 29 [ 0.067403] iommu: Adding device 7000f000.memory-controller to group 30 [ 0.067429] iommu: Adding device 7000f800.fuse to group 31 [ 0.067452] iommu: Adding device 70080000.ahub to group 32 [ 0.067471] iommu: Adding device 78000000.sdhci to group 33 [ 0.067494] iommu: Adding device 78000600.sdhci to group 34 [ 0.067513] iommu: Adding device 7d000000.usb to group 35 [ 0.067533] iommu: Adding device 7d000000.usb-phy to group 36 [ 0.067551] iommu: Adding device 7d004000.usb to group 37 [ 0.067571] iommu: Adding device 7d004000.usb-phy to group 38 [ 0.067589] iommu: Adding device 7d008000.usb to group 39 [ 0.067609] iommu: Adding device 7d008000.usb-phy to group 40 [ 0.067626] iommu: Adding device pmu to group 41 [ 0.067654] iommu: Adding device clocks to group 42 [ 0.067672] iommu: Adding device gpio-leds to group 43 [ 0.067690] iommu: Adding device regulators to group 44 [ 0.067709] iommu: Adding device regulators:regulator@0 to group 45 [ 0.067727] iommu: Adding device regulators:regulator@1 to group 46 [ 0.067746] iommu: Adding device regulators:regulator@2 to group 47 [ 0.067765] iommu: Adding device regulators:regulator@3 to group 48 [ 0.067783] iommu: Adding device regulators:regulator@4 to group 49 [ 0.067800] iommu: Adding device regulators:regulator@5 to group 50 [ 0.067824] iommu: Adding device regulators:regulator@6 to group 51 [ 0.067849] iommu: Adding device regulators:regulator@7 to group 52 [ 0.067867] iommu: Adding device regulators:regulator@8 to group 53 [ 0.067885] iommu: Adding device sound to group 54 [ 0.076426] AT91: Could not find identification node [ 0.076938] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.076953] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.077003] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.077011] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.077060] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.077068] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.077172] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.077179] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.078963] vgaarb: loaded [ 0.079425] SCSI subsystem initialized [ 0.079560] libata version 3.00 loaded. [ 0.079696] usbcore: registered new interface driver usbfs [ 0.079727] usbcore: registered new interface driver hub [ 0.079762] usbcore: registered new device driver usb [ 0.084187] iommu: Adding device tps65910-gpio to group 55 [ 0.084470] iommu: Adding device tps65910-pmic to group 56 [ 0.086943] vrtc: supplied by vdd_5v_in [ 0.090233] vio: supplied by vdd_5v_in [ 0.101818] vdd1: supplied by vdd_5v_in [ 0.103177] vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV [ 0.111830] vdd2: supplied by vdd_5v_in [ 0.132282] ldo1: supplied by vdd_1v5_gen [ 0.134626] ldo2: supplied by vdd_1v5_gen [ 0.135096] vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV [ 0.137334] ldo3: supplied by vdd_5v_in [ 0.139678] ldo4: supplied by vdd_5v_in [ 0.152278] ldo5: supplied by vdd_5v_in [ 0.162276] ldo6: supplied by vdd_1v8_gen [ 0.162747] avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV [ 0.164971] ldo7: supplied by vdd_1v8_gen [ 0.172288] ldo8: supplied by vdd_1v8_gen [ 0.180565] iommu: Adding device tps65910-rtc to group 57 [ 0.180680] iommu: Adding device tps65910-power to group 58 [ 0.182458] pps_core: LinuxPPS API ver. 1 registered [ 0.182466] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.182479] PTP clock support registered [ 0.182617] EDAC MC: Ver: 3.0.0 [ 0.182806] dmi: Firmware registration failed. [ 0.184151] clocksource: Switched to clocksource timer_us [ 0.215998] NET: Registered protocol family 2 [ 0.216418] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.216473] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.216559] TCP: Hash tables configured (established 8192 bind 8192) [ 0.216698] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.216766] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.216944] NET: Registered protocol family 1 [ 0.217273] RPC: Registered named UNIX socket transport module. [ 0.217281] RPC: Registered udp transport module. [ 0.217285] RPC: Registered tcp transport module. [ 0.217290] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.217299] PCI: CLS 0 bytes, default 64 [ 0.218128] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.218352] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.218837] iommu: Adding device alarmtimer to group 59 [ 0.219512] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.222803] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.223197] NFS: Registering the id_resolver key type [ 0.223224] Key type id_resolver registered [ 0.223229] Key type id_legacy registered [ 0.223259] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.224326] bounce: pool size: 64 pages [ 0.224366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.224374] io scheduler noop registered [ 0.224379] io scheduler deadline registered [ 0.224518] io scheduler cfq registered (default) [ 0.224525] io scheduler mq-deadline registered [ 0.224530] io scheduler kyber registered [ 0.230902] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.230919] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.230933] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.230943] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.231398] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.231442] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.231771] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.231784] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.231796] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.231837] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.231867] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.231897] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.231938] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.232434] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.232548] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.237912] tegra-pcie 3000.pcie: 2x3 configuration [ 0.238065] tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517 [ 0.243745] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.245733] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.274081] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.274230] iommu: Adding device serial8250 to group 60 [ 0.276226] console [ttyS0] disabled [ 0.276266] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.657697] console [ttyS0] enabled [ 1.661700] SuperH (H)SCI(F) driver initialized [ 1.666864] msm_serial: driver initialized [ 1.671057] STMicroelectronics ASC driver initialized [ 1.680028] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.692884] brd: module loaded [ 1.701294] loop: module loaded [ 1.710283] m25p80 spi0.1: w25q32 (4096 Kbytes) [ 1.716175] iommu: Adding device Fixed MDIO bus.0 to group 61 [ 1.722341] libphy: Fixed MDIO Bus: probed [ 1.727022] CAN device driver interface [ 1.731384] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.737803] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.743619] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.749571] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.756527] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.764176] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.771602] usbcore: registered new interface driver pegasus [ 1.777282] usbcore: registered new interface driver asix [ 1.782683] usbcore: registered new interface driver ax88179_178a [ 1.788790] usbcore: registered new interface driver cdc_ether [ 1.794644] usbcore: registered new interface driver smsc75xx [ 1.800403] usbcore: registered new interface driver smsc95xx [ 1.806164] usbcore: registered new interface driver net1080 [ 1.811823] usbcore: registered new interface driver cdc_subset [ 1.817756] usbcore: registered new interface driver zaurus [ 1.823344] usbcore: registered new interface driver cdc_ncm [ 1.829191] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.836935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.843448] ehci-pci: EHCI PCI platform driver [ 1.847921] ehci-platform: EHCI generic platform driver [ 1.853256] ehci-orion: EHCI orion driver [ 1.857361] SPEAr-ehci: EHCI SPEAr driver [ 1.861432] ehci-st: EHCI STMicroelectronics driver [ 1.866392] ehci-exynos: EHCI EXYNOS driver [ 1.870651] ehci-atmel: EHCI Atmel driver [ 1.874740] tegra-ehci: Tegra EHCI driver [ 1.879035] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.885228] ohci-pci: OHCI PCI platform driver [ 1.889692] ohci-platform: OHCI generic platform driver [ 1.895033] SPEAr-ohci: OHCI SPEAr driver [ 1.899107] ohci-st: OHCI STMicroelectronics driver [ 1.904044] ohci-atmel: OHCI Atmel driver [ 1.908484] usbcore: registered new interface driver usb-storage [ 1.916752] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.923251] iommu: Adding device ci_hdrc.0 to group 62 [ 1.933905] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.941089] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.959840] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.967432] i2c /dev entries driver [ 1.973075] IR NEC protocol handler initialized [ 1.977612] IR RC5(x/sz) protocol handler initialized [ 1.982649] IR RC6 protocol handler initialized [ 1.987175] IR JVC protocol handler initialized [ 1.991690] IR Sony protocol handler initialized [ 1.996301] IR SANYO protocol handler initialized [ 2.000990] IR Sharp protocol handler initialized [ 2.005696] IR MCE Keyboard/mouse protocol handler initialized [ 2.011511] IR XMP protocol handler initialized [ 2.022078] sdhci: Secure Digital Host Controller Interface driver [ 2.028270] sdhci: Copyright(c) Pierre Ossman [ 2.033522] Synopsys Designware Multimedia Card Interface Driver [ 2.040298] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.046483] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 2.051356] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 2.064522] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.134249] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 2.148261] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.214158] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.222935] ledtrig-cpu: registered to indicate activity on CPUs [ 2.229151] usbcore: registered new interface driver usbhid [ 2.234724] usbhid: USB HID core driver [ 2.241001] NET: Registered protocol family 10 [ 2.246102] Segment Routing with IPv6 [ 2.249796] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.256100] NET: Registered protocol family 17 [ 2.260538] can: controller area network core (rev 20170425 abi 9) [ 2.266769] NET: Registered protocol family 29 [ 2.271200] can: raw protocol (rev 20170425) [ 2.275468] can: broadcast manager protocol (rev 20170425 t) [ 2.281116] can: netlink gateway (rev 20170425) max_hops=1 [ 2.286886] Key type dns_resolver registered [ 2.291523] ThumbEE CPU extension supported. [ 2.295813] Registering SWP/SWPB emulation handler [ 2.312845] vdd_ddr: supplied by vdd_5v_in [ 2.317842] vdd_5v_sata: supplied by vdd_5v_in [ 2.322589] usb1_vbus: supplied by vdd_5v_in [ 2.327199] usb3_vbus: supplied by vdd_5v_in [ 2.332701] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 2.339423] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 2.344965] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 2.351001] tegra-pcie 3000.pcie: 2x3 configuration [ 2.351759] mmc1: new high speed MMC card at address 0001 [ 2.352525] mmcblk1: mmc1:0001 SEM16G 14.8 GiB [ 2.353441] mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 2.353973] mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 2.354506] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB [ 2.386483] tegra-pcie 3000.pcie: probing port 0, using 2 lanes [ 2.388290] Primary GPT is invalid, using alternate GPT. [ 2.388305] mmcblk1: p1 p2 p3 p4 p5 [ 2.402927] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.409744] mmcblk0: mmc0:aaaa SS04G 3.69 GiB [ 2.436246] mmcblk0: p1 p2 p3 [ 2.453442] tegra-pcie 3000.pcie: probing port 2, using 2 lanes [ 2.863173] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.272225] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.681273] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.688514] tegra-pcie 3000.pcie: link 2 down, ignoring [ 3.693826] tegra-pcie 3000.pcie: PCI host bridge to bus 0000:00 [ 3.699838] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.706022] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.712883] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.720190] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.725706] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.731711] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.741359] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.751019] pci 0000:00:01.0: enabling Extended Tags [ 3.755985] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.765741] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.775487] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.782091] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.791953] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.801690] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.811337] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 3.820981] PCI: bus0: Fast back to back transfers disabled [ 3.826554] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.834554] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.844289] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.854094] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.860126] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.865715] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.872931] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.880219] pci 0000:01:00.0: supports D1 D2 [ 3.884491] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.914568] PCI: bus1: Fast back to back transfers disabled [ 3.920132] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.926769] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.934510] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.940594] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.948345] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.956095] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.962178] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.967143] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.973225] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.980983] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.988043] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.994340] pcieport 0000:00:01.0: Signaling PME with IRQ 375 [ 4.000313] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.005918] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 4.012632] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0a2a000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376 [ 4.022640] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.036105] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.042707] [drm] No driver support for vblank timestamp query. [ 4.048665] [drm] Cannot find any crtc or sizes [ 4.053200] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 4.062520] tegra-ehci 7d004000.usb: EHCI Host Controller [ 4.067946] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 4.075723] tegra-ehci 7d004000.usb: irq 344, io mem 0x7d004000 [ 4.081670] [drm] Cannot find any crtc or sizes [ 4.104550] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 4.111734] hub 1-0:1.0: USB hub found [ 4.115513] hub 1-0:1.0: 1 port detected [ 4.120656] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.126070] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.133810] tegra-ehci 7d008000.usb: irq 345, io mem 0x7d008000 [ 4.164548] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.171654] hub 2-0:1.0: USB hub found [ 4.175427] hub 2-0:1.0: 1 port detected [ 4.185761] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 4.195266] vdd_sata,avdd_plle: disabling [ 4.200011] usb1_vbus: disabling [ 4.204758] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 4.241907] EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended [ 4.252552] EXT4-fs (mmcblk1p1): recovery complete [ 4.258930] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.267053] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.276800] devtmpfs: mounted [ 4.282301] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.544567] usb 2-1: new high-speed USB device number 2 using tegra-ehci