U-Boot SPL 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39) U-Boot 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39) TEGRA20 Model: Compulab TrimSlice board DRAM: 1 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 SF: Detected W25Q80BL with page size 256 Bytes, erase size 4 KiB, total 1 MiB tegra-pcie: PCI regions: tegra-pcie: I/O: 0x82000000-0x82010000 tegra-pcie: non-prefetchable memory: 0xa0000000-0xa8000000 tegra-pcie: prefetchable memory: 0xa8000000-0xc0000000 tegra-pcie: dual-mode configuration tegra-pcie: probing port 0, using 2 lanes In: serial Out: serial Err: serial Net: RTL8169#0 Hit any key to stop autoboot: 2  0 Tegra20 (TrimSlice) # Tegra20 (TrimSlice) # usb reset resetting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 1 USB Device(s) found USB2: lowlevel init failed scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra20 (TrimSlice) # setenv ipaddr 192.168.100.103; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra20 (TrimSlice) # tftpboot 0x00408000 zImage.multi_v7_defconfig Using RTL8169#0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.103 Filename 'zImage.multi_v7_defconfig'. Load address: 0x408000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################### 3.2 MiB/s done Bytes transferred = 8139272 (7c3208 hex) Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb Using RTL8169#0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.103 Filename 'tegra20-trimslice.dtb'. Load address: 0x2408000 Loading: *## 2.9 MiB/s done Bytes transferred = 21454 (53ce hex) Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000 Kernel image @ 0x408000 [ 0x000000 - 0x7c3200 ] ## Flattened Device Tree blob at 02408000 Booting using the fdt blob at 0x2408000 Using Device Tree in place at 02408000, end 024103cd Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-rc7-next-20170829-197538-g9458bf6 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 29 02:50:55 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Compulab TrimSlice board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x3c000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c158a700, node_mem_map ef7f8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @ef7c4000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 954328K/1048576K available (10240K kernel code, 1610K rwdata, 4480K rodata, 2048K init, 405K bss, 28712K reserved, 65536K cma-reserved, 196608K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1592a10 (1611 kB) [ 0.000000] .bss : 0xc159bb90 - 0xc16012bc ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 errata 727915 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001 [ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000026] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000036] Switching to timer-based delay loop, resolution 1000ns [ 0.001678] Console: colour dummy device 80x30 [ 0.001707] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.001719] pid_max: default: 32768 minimum: 301 [ 0.001806] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001818] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002256] CPU: Testing write buffer coherency: ok [ 0.002461] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002695] Setting up static identity map for 0x300000 - 0x3000a0 [ 0.003335] Hierarchical SRCU implementation. [ 0.004186] Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2 [ 0.004635] EFI services will not be available. [ 0.004725] smp: Bringing up secondary CPUs ... [ 0.005243] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005317] smp: Brought up 1 node, 2 CPUs [ 0.005328] SMP: Total of 2 processors activated (4.00 BogoMIPS). [ 0.005334] CPU: All CPU(s) started in SVC mode. [ 0.005997] devtmpfs: initialized [ 0.009559] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 0.009767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.009782] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.012784] pinctrl core: initialized pinctrl subsystem [ 0.013701] DMI not present or invalid. [ 0.013940] NET: Registered protocol family 16 [ 0.016039] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.017348] cpuidle: using governor menu [ 0.032858] No ATAGs? [ 0.032941] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.032952] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.037654] Serial: AMBA PL011 UART driver [ 0.047895] AT91: Could not find identification node [ 0.048392] usb1_vbus: Failed to request enable GPIO170: -517 [ 0.048409] reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517 [ 0.051807] vgaarb: loaded [ 0.052352] SCSI subsystem initialized [ 0.052480] libata version 3.00 loaded. [ 0.052660] usbcore: registered new interface driver usbfs [ 0.052700] usbcore: registered new interface driver hub [ 0.052740] usbcore: registered new device driver usb [ 0.054688] pps_core: LinuxPPS API ver. 1 registered [ 0.054696] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.054714] PTP clock support registered [ 0.054856] EDAC MC: Ver: 3.0.0 [ 0.055100] dmi: Firmware registration failed. [ 0.056520] clocksource: Switched to clocksource timer_us [ 0.095169] NET: Registered protocol family 2 [ 0.095597] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.095668] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.095781] TCP: Hash tables configured (established 8192 bind 8192) [ 0.095896] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.095949] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.096111] NET: Registered protocol family 1 [ 0.096403] RPC: Registered named UNIX socket transport module. [ 0.096411] RPC: Registered udp transport module. [ 0.096416] RPC: Registered tcp transport module. [ 0.096421] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.096431] PCI: CLS 0 bytes, default 64 [ 0.097265] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.097430] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.098550] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.102872] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.103342] NFS: Registering the id_resolver key type [ 0.103367] Key type id_resolver registered [ 0.103373] Key type id_legacy registered [ 0.103405] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.104509] bounce: pool size: 64 pages [ 0.104557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.104566] io scheduler noop registered [ 0.104572] io scheduler deadline registered [ 0.104742] io scheduler cfq registered (default) [ 0.104749] io scheduler mq-deadline registered [ 0.104755] io scheduler kyber registered [ 0.115983] tegra-pcie 80003000.pcie: dual-mode configuration [ 0.116728] tegra-pcie 80003000.pcie: probing port 0, using 2 lanes [ 0.200664] tegra-pcie 80003000.pcie: PCI host bridge to bus 0000:00 [ 0.200676] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.200685] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff] [ 0.200694] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref] [ 0.200702] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.200730] pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000 [ 0.200750] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.200761] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.200780] pci 0000:00:01.0: enabling Extended Tags [ 0.200790] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 0.200815] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 0.200839] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200850] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 0.201001] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.201013] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.201024] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 0.201030] PCI: bus0: Fast back to back transfers disabled [ 0.201040] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.201049] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.201060] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.201165] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.201199] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.201224] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 0.201242] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 0.201255] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.201330] pci 0000:01:00.0: supports D1 D2 [ 0.201338] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.226573] PCI: bus1: Fast back to back transfers disabled [ 0.226586] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.226614] pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff] [ 0.226625] pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref] [ 0.226634] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.226646] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref] [ 0.226655] pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref] [ 0.226675] pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref] [ 0.226694] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 0.226705] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.226712] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.226722] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa00fffff] [ 0.226730] pci 0000:00:01.0: bridge window [mem 0xa8000000-0xa80fffff 64bit pref] [ 0.226752] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 0.226805] Disabling cpuidle LP2 state, since PCIe IRQs are in use [ 0.226840] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 0.227024] pcieport 0000:00:01.0: Signaling PME with IRQ 295 [ 0.232862] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels [ 0.276577] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.278733] console [ttyS0] disabled [ 0.278772] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra [ 1.363085] console [ttyS0] enabled [ 1.367159] SuperH (H)SCI(F) driver initialized [ 1.372428] msm_serial: driver initialized [ 1.376666] STMicroelectronics ASC driver initialized [ 1.386016] tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.397120] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.403719] [drm] No driver support for vblank timestamp query. [ 1.409675] [drm] Cannot find any crtc or sizes [ 1.414212] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 1.422181] [drm] Cannot find any crtc or sizes [ 1.432301] brd: module loaded [ 1.440201] loop: module loaded [ 1.449246] m25p80 spi0.0: found s25fl008k, expected w25q80bl [ 1.455052] m25p80 spi0.0: s25fl008k (1024 Kbytes) [ 1.461722] libphy: Fixed MDIO Bus: probed [ 1.466505] CAN device driver interface [ 1.471005] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.477599] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.483416] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.489381] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.496324] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.502449] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.508044] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 1.514524] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf0a5c000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296 [ 1.524188] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.534942] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.542388] usbcore: registered new interface driver pegasus [ 1.548087] usbcore: registered new interface driver asix [ 1.553494] usbcore: registered new interface driver ax88179_178a [ 1.559614] usbcore: registered new interface driver cdc_ether [ 1.565462] usbcore: registered new interface driver smsc75xx [ 1.571244] usbcore: registered new interface driver smsc95xx [ 1.577018] usbcore: registered new interface driver net1080 [ 1.582686] usbcore: registered new interface driver cdc_subset [ 1.588629] usbcore: registered new interface driver zaurus [ 1.594222] usbcore: registered new interface driver cdc_ncm [ 1.600149] tegra-phy c5004000.usb-phy: no vbus regulator [ 1.606664] tegra-phy c5008000.usb-phy: no vbus regulator [ 1.613347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.619875] ehci-pci: EHCI PCI platform driver [ 1.624343] ehci-platform: EHCI generic platform driver [ 1.629721] ehci-orion: EHCI orion driver [ 1.633831] SPEAr-ehci: EHCI SPEAr driver [ 1.637940] ehci-st: EHCI STMicroelectronics driver [ 1.642899] ehci-exynos: EHCI EXYNOS driver [ 1.647197] ehci-atmel: EHCI Atmel driver [ 1.651288] tegra-ehci: Tegra EHCI driver [ 1.707731] ulpi_phy_power_on: ulpi write failed [ 1.712339] tegra-ehci c5004000.usb: Failed to power on the phy [ 1.718275] tegra-ehci: probe of c5004000.usb failed with error -110 [ 1.727248] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.732650] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.740372] tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000 [ 1.766544] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 1.772987] hub 1-0:1.0: USB hub found [ 1.776781] hub 1-0:1.0: 1 port detected [ 1.781003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.787195] ohci-pci: OHCI PCI platform driver [ 1.791666] ohci-platform: OHCI generic platform driver [ 1.797056] SPEAr-ohci: OHCI SPEAr driver [ 1.801155] ohci-st: OHCI STMicroelectronics driver [ 1.806120] ohci-atmel: OHCI Atmel driver [ 1.810689] usbcore: registered new interface driver usb-storage [ 1.819704] rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0 [ 1.827340] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.834497] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.841081] i2c /dev entries driver [ 1.847117] IR NEC protocol handler initialized [ 1.851635] IR RC5(x/sz) protocol handler initialized [ 1.856689] IR RC6 protocol handler initialized [ 1.861205] IR JVC protocol handler initialized [ 1.865720] IR Sony protocol handler initialized [ 1.870332] IR SANYO protocol handler initialized [ 1.875021] IR Sharp protocol handler initialized [ 1.879719] IR MCE Keyboard/mouse protocol handler initialized [ 1.885534] IR XMP protocol handler initialized [ 1.896902] sdhci: Secure Digital Host Controller Interface driver [ 1.903066] sdhci: Copyright(c) Pierre Ossman [ 1.908543] Synopsys Designware Multimedia Card Interface Driver [ 1.915462] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.929876] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.996700] mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA [ 2.004578] sdhci-tegra c8000600.sdhci: Got CD GPIO [ 2.009644] sdhci-tegra c8000600.sdhci: Got WP GPIO [ 2.023024] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.087060] mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA [ 2.100546] ledtrig-cpu: registered to indicate activity on CPUs [ 2.107652] usbcore: registered new interface driver usbhid [ 2.113239] usbhid: USB HID core driver [ 2.130678] NET: Registered protocol family 10 [ 2.138583] Segment Routing with IPv6 [ 2.142299] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.148657] NET: Registered protocol family 17 [ 2.153095] can: controller area network core (rev 20170425 abi 9) [ 2.159328] NET: Registered protocol family 29 [ 2.163760] can: raw protocol (rev 20170425) [ 2.168031] can: broadcast manager protocol (rev 20170425 t) [ 2.173680] can: netlink gateway (rev 20170425) max_hops=1 [ 2.179449] Key type dns_resolver registered [ 2.184059] ThumbEE CPU extension supported. [ 2.188343] Registering SWP/SWPB emulation handler [ 2.201546] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 2.208051] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.213454] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2 [ 2.221077] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 2.227980] tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000 [ 2.256603] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.263709] hub 2-0:1.0: USB hub found [ 2.267623] hub 2-0:1.0: 1 port detected [ 2.273241] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.280500] rtc-em3027 2-0056: hctosys: unable to read the hardware clock [ 2.288280] Waiting for root device PARTUUID=11eb23c1-01... [ 2.300387] mmc1: new high speed SD card at address b368 [ 2.306032] mmcblk1: mmc1:b368 NCard 1.83 GiB (ro) [ 2.313409] mmcblk1: p1 p2 [ 2.458874] hub 1-1:1.0: USB hub found [ 2.462969] hub 1-1:1.0: 4 ports detected [ 2.786676] usb 1-1.2: new high-speed USB device number 3 using tegra-ehci [ 3.274360] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.284374] mmc0: new high speed SDHC card at address b368 [ 3.290253] mmcblk0: mmc0:b368 NCard 3.70 GiB [ 3.296969] mmcblk0: p1 [ 3.410043] asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68 [ 3.427453] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.160580] EXT4-fs (mmcblk0p1): recovery complete [ 4.234542] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.242859] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 4.252850] devtmpfs: mounted [ 4.257404] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# root@(none):/#