U-Boot SPL 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39) U-Boot 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39) TEGRA20 Model: Compulab TrimSlice board DRAM: 1 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 SF: Detected W25Q80BL with page size 256 Bytes, erase size 4 KiB, total 1 MiB tegra-pcie: PCI regions: tegra-pcie: I/O: 0x82000000-0x82010000 tegra-pcie: non-prefetchable memory: 0xa0000000-0xa8000000 tegra-pcie: prefetchable memory: 0xa8000000-0xc0000000 tegra-pcie: dual-mode configuration tegra-pcie: probing port 0, using 2 lanes In: serial Out: serial Err: serial Net: RTL8169#0 Hit any key to stop autoboot: 2  0 Tegra20 (TrimSlice) # Tegra20 (TrimSlice) # usb reset resetting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 1 USB Device(s) found USB2: lowlevel init failed scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra20 (TrimSlice) # setenv ipaddr 192.168.100.103; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra20 (TrimSlice) # tftpboot 0x00408000 zImage.multi_v7_defconfig Using RTL8169#0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.103 Filename 'zImage.multi_v7_defconfig'. Load address: 0x408000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################### 4.1 MiB/s done Bytes transferred = 8135176 (7c2208 hex) Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb Using RTL8169#0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.103 Filename 'tegra20-trimslice.dtb'. Load address: 0x2408000 Loading: *## 3.4 MiB/s done Bytes transferred = 21454 (53ce hex) Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000 Kernel image @ 0x408000 [ 0x000000 - 0x7c2200 ] ## Flattened Device Tree blob at 02408000 Booting using the fdt blob at 0x2408000 Using Device Tree in place at 02408000, end 024103cd Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-rc6-next-20170828-197041-gadc4148 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Aug 28 14:34:38 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Compulab TrimSlice board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x3c000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c158a880, node_mem_map ef7f8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @ef7c4000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 954328K/1048576K available (10240K kernel code, 1610K rwdata, 4480K rodata, 2048K init, 405K bss, 28712K reserved, 65536K cma-reserved, 196608K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1592b90 (1611 kB) [ 0.000000] .bss : 0xc159bb90 - 0xc160137c ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 errata 727915 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000025] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000035] Switching to timer-based delay loop, resolution 1000ns [ 0.001636] Console: colour dummy device 80x30 [ 0.001665] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.001676] pid_max: default: 32768 minimum: 301 [ 0.001765] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001776] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002212] CPU: Testing write buffer coherency: ok [ 0.002420] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002656] Setting up static identity map for 0x300000 - 0x3000a0 [ 0.003288] Hierarchical SRCU implementation. [ 0.004125] Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2 [ 0.004573] EFI services will not be available. [ 0.004663] smp: Bringing up secondary CPUs ... [ 0.005179] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005253] smp: Brought up 1 node, 2 CPUs [ 0.005264] SMP: Total of 2 processors activated (4.00 BogoMIPS). [ 0.005270] CPU: All CPU(s) started in SVC mode. [ 0.005927] devtmpfs: initialized [ 0.009449] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 0.009653] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.009668] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.012666] pinctrl core: initialized pinctrl subsystem [ 0.013584] DMI not present or invalid. [ 0.013824] NET: Registered protocol family 16 [ 0.016148] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.017456] cpuidle: using governor menu [ 0.032705] No ATAGs? [ 0.032788] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.032799] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.037495] Serial: AMBA PL011 UART driver [ 0.047781] AT91: Could not find identification node [ 0.048277] usb1_vbus: Failed to request enable GPIO170: -517 [ 0.048293] reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517 [ 0.051690] vgaarb: loaded [ 0.052232] SCSI subsystem initialized [ 0.052361] libata version 3.00 loaded. [ 0.052540] usbcore: registered new interface driver usbfs [ 0.052578] usbcore: registered new interface driver hub [ 0.052618] usbcore: registered new device driver usb [ 0.054562] pps_core: LinuxPPS API ver. 1 registered [ 0.054570] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.054587] PTP clock support registered [ 0.054730] EDAC MC: Ver: 3.0.0 [ 0.054973] dmi: Firmware registration failed. [ 0.056389] clocksource: Switched to clocksource timer_us [ 0.094020] NET: Registered protocol family 2 [ 0.094447] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.094518] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.094631] TCP: Hash tables configured (established 8192 bind 8192) [ 0.094748] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.094800] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.094964] NET: Registered protocol family 1 [ 0.095269] RPC: Registered named UNIX socket transport module. [ 0.095276] RPC: Registered udp transport module. [ 0.095281] RPC: Registered tcp transport module. [ 0.095286] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.095296] PCI: CLS 0 bytes, default 64 [ 0.096088] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.096255] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.097419] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.101646] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.102115] NFS: Registering the id_resolver key type [ 0.102139] Key type id_resolver registered [ 0.102145] Key type id_legacy registered [ 0.102177] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.103271] bounce: pool size: 64 pages [ 0.103318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.103327] io scheduler noop registered [ 0.103333] io scheduler deadline registered [ 0.103498] io scheduler cfq registered (default) [ 0.103505] io scheduler mq-deadline registered [ 0.103511] io scheduler kyber registered [ 0.114762] tegra-pcie 80003000.pcie: dual-mode configuration [ 0.115479] tegra-pcie 80003000.pcie: probing port 0, using 2 lanes [ 0.197971] tegra-pcie 80003000.pcie: PCI host bridge to bus 0000:00 [ 0.197984] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.197992] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff] [ 0.198000] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref] [ 0.198008] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.198037] pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000 [ 0.198058] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.198069] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.198087] pci 0000:00:01.0: enabling Extended Tags [ 0.198097] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 0.198122] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 0.198146] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.198157] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 0.198306] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.198319] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.198329] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 0.198336] PCI: bus0: Fast back to back transfers disabled [ 0.198345] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.198355] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.198366] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.198472] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.198505] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.198530] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 0.198548] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 0.198562] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.198636] pci 0000:01:00.0: supports D1 D2 [ 0.198644] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.226422] PCI: bus1: Fast back to back transfers disabled [ 0.226435] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.226462] pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff] [ 0.226474] pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref] [ 0.226483] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.226495] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref] [ 0.226505] pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref] [ 0.226525] pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref] [ 0.226544] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 0.226555] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.226564] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.226573] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa00fffff] [ 0.226581] pci 0000:00:01.0: bridge window [mem 0xa8000000-0xa80fffff 64bit pref] [ 0.226604] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 0.226656] Disabling cpuidle LP2 state, since PCIe IRQs are in use [ 0.226692] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 0.226875] pcieport 0000:00:01.0: Signaling PME with IRQ 295 [ 0.232694] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels [ 0.276185] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.278351] console [ttyS0] disabled [ 0.278390] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra [ 1.362684] console [ttyS0] enabled [ 1.366750] SuperH (H)SCI(F) driver initialized [ 1.372020] msm_serial: driver initialized [ 1.376234] STMicroelectronics ASC driver initialized [ 1.385606] tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.396714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.403314] [drm] No driver support for vblank timestamp query. [ 1.409269] [drm] Cannot find any crtc or sizes [ 1.413805] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 1.421772] [drm] Cannot find any crtc or sizes [ 1.431828] brd: module loaded [ 1.439579] loop: module loaded [ 1.448654] m25p80 spi0.0: found s25fl008k, expected w25q80bl [ 1.454487] m25p80 spi0.0: s25fl008k (1024 Kbytes) [ 1.461168] libphy: Fixed MDIO Bus: probed [ 1.465970] CAN device driver interface [ 1.470475] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.477147] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.482963] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.488928] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.495871] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.502015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.507615] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 1.514082] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf0a5c000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296 [ 1.523744] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.534473] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.541928] usbcore: registered new interface driver pegasus [ 1.547625] usbcore: registered new interface driver asix [ 1.553033] usbcore: registered new interface driver ax88179_178a [ 1.559150] usbcore: registered new interface driver cdc_ether [ 1.564997] usbcore: registered new interface driver smsc75xx [ 1.570784] usbcore: registered new interface driver smsc95xx [ 1.576554] usbcore: registered new interface driver net1080 [ 1.582221] usbcore: registered new interface driver cdc_subset [ 1.588167] usbcore: registered new interface driver zaurus [ 1.593761] usbcore: registered new interface driver cdc_ncm [ 1.599692] tegra-phy c5004000.usb-phy: no vbus regulator [ 1.606185] tegra-phy c5008000.usb-phy: no vbus regulator [ 1.612894] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.619425] ehci-pci: EHCI PCI platform driver [ 1.623885] ehci-platform: EHCI generic platform driver [ 1.629260] ehci-orion: EHCI orion driver [ 1.633368] SPEAr-ehci: EHCI SPEAr driver [ 1.637481] ehci-st: EHCI STMicroelectronics driver [ 1.642439] ehci-exynos: EHCI EXYNOS driver [ 1.646737] ehci-atmel: EHCI Atmel driver [ 1.650827] tegra-ehci: Tegra EHCI driver [ 1.707595] ulpi_phy_power_on: ulpi write failed [ 1.712203] tegra-ehci c5004000.usb: Failed to power on the phy [ 1.718138] tegra-ehci: probe of c5004000.usb failed with error -110 [ 1.727113] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.732516] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.740248] tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000 [ 1.766408] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 1.772844] hub 1-0:1.0: USB hub found [ 1.776627] hub 1-0:1.0: 1 port detected [ 1.780846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.787039] ohci-pci: OHCI PCI platform driver [ 1.791509] ohci-platform: OHCI generic platform driver [ 1.796901] SPEAr-ohci: OHCI SPEAr driver [ 1.800999] ohci-st: OHCI STMicroelectronics driver [ 1.805959] ohci-atmel: OHCI Atmel driver [ 1.810524] usbcore: registered new interface driver usb-storage [ 1.819525] rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0 [ 1.827148] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.834300] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.840888] i2c /dev entries driver [ 1.846951] IR NEC protocol handler initialized [ 1.851468] IR RC5(x/sz) protocol handler initialized [ 1.856521] IR RC6 protocol handler initialized [ 1.861037] IR JVC protocol handler initialized [ 1.865552] IR Sony protocol handler initialized [ 1.870164] IR SANYO protocol handler initialized [ 1.874852] IR Sharp protocol handler initialized [ 1.879551] IR MCE Keyboard/mouse protocol handler initialized [ 1.885366] IR XMP protocol handler initialized [ 1.896663] sdhci: Secure Digital Host Controller Interface driver [ 1.902828] sdhci: Copyright(c) Pierre Ossman [ 1.908295] Synopsys Designware Multimedia Card Interface Driver [ 1.915213] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.929627] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.996564] mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA [ 2.004443] sdhci-tegra c8000600.sdhci: Got CD GPIO [ 2.009507] sdhci-tegra c8000600.sdhci: Got WP GPIO [ 2.022909] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.087019] mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA [ 2.102365] ledtrig-cpu: registered to indicate activity on CPUs [ 2.108661] usbcore: registered new interface driver usbhid [ 2.114219] usbhid: USB HID core driver [ 2.121440] NET: Registered protocol family 10 [ 2.129145] Segment Routing with IPv6 [ 2.132849] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.139190] NET: Registered protocol family 17 [ 2.143629] can: controller area network core (rev 20170425 abi 9) [ 2.149858] NET: Registered protocol family 29 [ 2.154290] can: raw protocol (rev 20170425) [ 2.158566] can: broadcast manager protocol (rev 20170425 t) [ 2.164214] can: netlink gateway (rev 20170425) max_hops=1 [ 2.169980] Key type dns_resolver registered [ 2.174598] ThumbEE CPU extension supported. [ 2.178883] Registering SWP/SWPB emulation handler [ 2.186730] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 2.191921] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 2.191948] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.191969] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2 [ 2.192194] tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000 [ 2.226412] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.232871] hub 2-0:1.0: USB hub found [ 2.236667] hub 2-0:1.0: 1 port detected [ 2.241414] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.248896] rtc-em3027 2-0056: hctosys: unable to read the hardware clock [ 2.255502] mmc1: new high speed SD card at address b368 [ 2.261930] mmcblk1: mmc1:b368 NCard 1.83 GiB (ro) [ 2.269068] mmcblk1: p1 p2 [ 2.272881] Waiting for root device PARTUUID=11eb23c1-01... [ 2.428892] hub 1-1:1.0: USB hub found [ 2.432977] hub 1-1:1.0: 4 ports detected [ 2.756537] usb 1-1.2: new high-speed USB device number 3 using tegra-ehci [ 3.274348] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.284296] mmc0: new high speed SDHC card at address b368 [ 3.290101] mmcblk0: mmc0:b368 NCard 3.70 GiB [ 3.296941] mmcblk0: p1 [ 3.380273] asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68 [ 3.392567] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.125014] EXT4-fs (mmcblk0p1): recovery complete [ 4.199556] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.207759] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 4.217560] devtmpfs: mounted [ 4.222082] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# root@(none):/#