U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) TEGRA114 Board: NVIDIA Dalmore I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra114 (Dalmore) # Tegra114 (Dalmore) # usb reset (Re)start USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash' Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 3.1 MiB/s done Bytes transferred = 8050448 (7ad710 hex) Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *### 3 MiB/s done Bytes transferred = 35044 (88e4 hex) Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7ad710 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 22:34:19 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c157ca80, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @eef98000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993552K/2096128K available (10240K kernel code, 1555K rwdata, 4460K rodata, 2048K init, 405K bss, 37040K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1584c20 (1556 kB) [ 0.000000] .bss : 0xc158dc08 - 0xc15f32bc ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000030] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000045] Switching to timer-based delay loop, resolution 1000ns [ 0.003349] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.003369] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.003388] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.003403] Switching to timer-based delay loop, resolution 83ns [ 0.003824] Console: colour dummy device 80x30 [ 0.003858] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.003876] pid_max: default: 32768 minimum: 301 [ 0.003977] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003993] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004506] CPU: Testing write buffer coherency: ok [ 0.004750] /cpus/cpu@0 missing clock-frequency property [ 0.004781] /cpus/cpu@1 missing clock-frequency property [ 0.004811] /cpus/cpu@2 missing clock-frequency property [ 0.004843] /cpus/cpu@3 missing clock-frequency property [ 0.004856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005163] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.006425] Hierarchical SRCU implementation. [ 0.007793] Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0 [ 0.008450] EFI services will not be available. [ 0.008606] smp: Bringing up secondary CPUs ... [ 0.009115] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009704] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010296] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010385] smp: Brought up 1 node, 4 CPUs [ 0.010408] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.010418] CPU: All CPU(s) started in SVC mode. [ 0.011931] devtmpfs: initialized [ 0.020052] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.020352] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020370] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021827] pinctrl core: initialized pinctrl subsystem [ 0.023097] DMI not present or invalid. [ 0.023285] random: get_random_u32 called from bucket_table_alloc+0xe8/0x254 with crng_init=0 [ 0.023409] NET: Registered protocol family 16 [ 0.025593] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027558] cpuidle: using governor menu [ 0.048517] No ATAGs? [ 0.048647] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048664] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.054049] Serial: AMBA PL011 UART driver [ 0.054772] tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered [ 0.054845] iommu: Adding device reg-dummy to group 0 [ 0.054879] iommu: Adding device 50000000.host1x to group 1 [ 0.054912] iommu: Adding device 54140000.gr2d to group 2 [ 0.054949] iommu: Adding device 54180000.gr3d to group 3 [ 0.055010] iommu: Adding device 54200000.dc to group 4 [ 0.055068] iommu: Adding device 54240000.dc to group 5 [ 0.055099] iommu: Adding device 54280000.hdmi to group 6 [ 0.055131] iommu: Adding device 54300000.dsi to group 7 [ 0.055163] iommu: Adding device 60005000.timer to group 8 [ 0.055194] iommu: Adding device 60007000.flow-controller to group 9 [ 0.055233] iommu: Adding device 6000a000.dma to group 10 [ 0.055273] iommu: Adding device 6000c000.ahb to group 11 [ 0.055304] iommu: Adding device 6000d000.gpio to group 12 [ 0.055334] iommu: Adding device 70000800.apbmisc to group 13 [ 0.055364] iommu: Adding device 70000868.pinmux to group 14 [ 0.055395] iommu: Adding device 70006300.serial to group 15 [ 0.055426] iommu: Adding device 7000a000.pwm to group 16 [ 0.055458] iommu: Adding device 7000c000.i2c to group 17 [ 0.055490] iommu: Adding device 7000c700.i2c to group 18 [ 0.055524] iommu: Adding device 7000d000.i2c to group 19 [ 0.055555] iommu: Adding device 7000da00.spi to group 20 [ 0.055590] iommu: Adding device 7000e000.rtc to group 21 [ 0.055620] iommu: Adding device 7000e400.pmc to group 22 [ 0.055650] iommu: Adding device 7000f800.fuse to group 23 [ 0.055681] iommu: Adding device 70019000.memory-controller to group 24 [ 0.055712] iommu: Adding device 70080000.ahub to group 25 [ 0.055741] iommu: Adding device 700e3000.mipi to group 26 [ 0.055771] iommu: Adding device 78000400.sdhci to group 27 [ 0.055807] iommu: Adding device 78000600.sdhci to group 28 [ 0.055838] iommu: Adding device 7d008000.usb to group 29 [ 0.055871] iommu: Adding device 7d008000.usb-phy to group 30 [ 0.055903] iommu: Adding device timer to group 31 [ 0.055938] iommu: Adding device backlight to group 32 [ 0.055969] iommu: Adding device clocks to group 33 [ 0.055998] iommu: Adding device gpio-keys to group 34 [ 0.056028] iommu: Adding device regulators to group 35 [ 0.056063] iommu: Adding device regulators:regulator@0 to group 36 [ 0.056093] iommu: Adding device regulators:regulator@1 to group 37 [ 0.056124] iommu: Adding device regulators:regulator@3 to group 38 [ 0.056155] iommu: Adding device regulators:regulator@4 to group 39 [ 0.056187] iommu: Adding device regulators:regulator@5 to group 40 [ 0.056222] iommu: Adding device regulators:regulator@6 to group 41 [ 0.056260] iommu: Adding device regulators:regulator@7 to group 42 [ 0.056289] iommu: Adding device sound to group 43 [ 0.069997] AT91: Could not find identification node [ 0.070476] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.070499] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.070605] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.070619] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.070720] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.070734] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.071149] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.071164] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.073502] vgaarb: loaded [ 0.074224] SCSI subsystem initialized [ 0.074393] libata version 3.00 loaded. [ 0.074588] usbcore: registered new interface driver usbfs [ 0.074637] usbcore: registered new interface driver hub [ 0.074708] usbcore: registered new device driver usb [ 0.077901] tps65090 2-0048: No cache defaults, reading back from HW [ 0.078899] iommu: Adding device tps65090-pmic to group 44 [ 0.079840] TPS65090_RAILSDCDC1: supplied by vdd_ac_bat [ 0.080890] TPS65090_RAILSDCDC2: supplied by vdd_ac_bat [ 0.081938] TPS65090_RAILSDCDC3: supplied by vdd_ac_bat [ 0.082444] TPS65090_RAILSFET1: supplied by vdd_ac_bat [ 0.082806] TPS65090_RAILSFET2: supplied by vdd_ac_bat [ 0.083144] TPS65090_RAILSFET3: supplied by vdd-sys-3v3 [ 0.083419] random: fast init done [ 0.083664] TPS65090_RAILSFET4: supplied by vdd-sys-3v3 [ 0.084208] TPS65090_RAILSFET5: supplied by vdd-sys-3v3 [ 0.084708] TPS65090_RAILSFET6: supplied by vdd-sys-3v3 [ 0.085537] TPS65090_RAILSFET7: supplied by vdd-sys-3v3 [ 0.086044] TPS65090_RAILSLDO1: supplied by vdd_ac_bat [ 0.086242] TPS65090_RAILSLDO2: supplied by vdd_ac_bat [ 0.086560] iommu: Adding device tps65090-charger to group 45 [ 0.087156] palmas 2-0058: Irq flag is 0x00000004 [ 0.089085] palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0 [ 0.089320] iommu: Adding device 7000d000.i2c:tps65913@58:gpio to group 46 [ 0.089855] iommu: Adding device 7000d000.i2c:tps65913@58:pmic to group 47 [ 0.091657] SMPS12: supplied by vdd-ao [ 0.092641] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 0.093451] SMPS3: supplied by vdd-ao [ 0.095161] SMPS457: supplied by vdd-sys-3v3 [ 0.096779] SMPS6: supplied by regulator-dummy [ 0.098166] SMPS8: supplied by vdd-sys-3v3 [ 0.099742] SMPS9: supplied by vdd-sys-3v3 [ 0.100258] sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV [ 0.101621] SMPS10_OUT2: supplied by regulator-dummy [ 0.102440] SMPS10_OUT1: supplied by regulator-dummy [ 0.103268] LDO1: supplied by vdd-sys-3v3 [ 0.104408] LDO2: supplied by vdd-sys-3v3 [ 0.105516] LDO3: supplied by vddio-1v8 [ 0.106597] LDO4: supplied by vdd-sys-3v3 [ 0.107698] LDO5: supplied by vdd_ac_bat [ 0.108367] LDO6: supplied by vdd-sys-3v3 [ 0.108879] vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV [ 0.110199] LDO7: supplied by vdd-sys-3v3 [ 0.111816] LDO8: supplied by vdd-ao [ 0.112343] vdd-rtc: Bringing 675000uV into 900000-900000uV [ 0.114474] LDO9: supplied by sdhci-vdd-sd-slot [ 0.124778] LDOLN: supplied by vdd-sys-5v0 [ 0.125883] LDOUSB: supplied by vdd-sys-5v0 [ 0.136191] iommu: Adding device 7000d000.i2c:tps65913@58:rtc to group 48 [ 0.136598] iommu: Adding device 7000d000.i2c:tps65913@58:pinmux to group 49 [ 0.137150] pps_core: LinuxPPS API ver. 1 registered [ 0.137160] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.137182] PTP clock support registered [ 0.137363] EDAC MC: Ver: 3.0.0 [ 0.137642] dmi: Firmware registration failed. [ 0.139396] clocksource: Switched to clocksource arch_sys_counter [ 0.195152] NET: Registered protocol family 2 [ 0.195660] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.195760] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.195948] TCP: Hash tables configured (established 8192 bind 8192) [ 0.196033] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.196078] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.196236] NET: Registered protocol family 1 [ 0.196569] RPC: Registered named UNIX socket transport module. [ 0.196580] RPC: Registered udp transport module. [ 0.196590] RPC: Registered tcp transport module. [ 0.196599] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.196612] PCI: CLS 0 bytes, default 64 [ 0.198031] iommu: Adding device alarmtimer to group 50 [ 0.198838] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.204700] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.205271] NFS: Registering the id_resolver key type [ 0.205296] Key type id_resolver registered [ 0.205306] Key type id_legacy registered [ 0.205350] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.206723] bounce: pool size: 64 pages [ 0.206775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.206787] io scheduler noop registered [ 0.206797] io scheduler deadline registered [ 0.207014] io scheduler cfq registered (default) [ 0.207025] io scheduler mq-deadline registered [ 0.207034] io scheduler kyber registered [ 0.237137] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.239646] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.291007] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.291107] iommu: Adding device serial8250 to group 51 [ 0.293647] console [ttyS0] disabled [ 0.293689] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra [ 1.607337] console [ttyS0] enabled [ 1.611565] SuperH (H)SCI(F) driver initialized [ 1.617031] msm_serial: driver initialized [ 1.621318] STMicroelectronics ASC driver initialized [ 1.632135] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.653839] brd: module loaded [ 1.663019] loop: module loaded [ 1.683129] m25p80 spi32766.0: w25q32dw (4096 Kbytes) [ 1.690319] iommu: Adding device Fixed MDIO bus.0 to group 52 [ 1.696484] libphy: Fixed MDIO Bus: probed [ 1.701603] CAN device driver interface [ 1.706225] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.713074] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.718899] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.724873] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.731836] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.740743] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.748170] usbcore: registered new interface driver pegasus [ 1.753884] usbcore: registered new interface driver asix [ 1.759303] usbcore: registered new interface driver ax88179_178a [ 1.765439] usbcore: registered new interface driver cdc_ether [ 1.771316] usbcore: registered new interface driver smsc75xx [ 1.777091] usbcore: registered new interface driver smsc95xx [ 1.782879] usbcore: registered new interface driver net1080 [ 1.788557] usbcore: registered new interface driver cdc_subset [ 1.794510] usbcore: registered new interface driver zaurus [ 1.800139] usbcore: registered new interface driver cdc_ncm [ 1.807652] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.814188] ehci-pci: EHCI PCI platform driver [ 1.818657] ehci-platform: EHCI generic platform driver [ 1.824077] ehci-orion: EHCI orion driver [ 1.828221] SPEAr-ehci: EHCI SPEAr driver [ 1.832365] ehci-st: EHCI STMicroelectronics driver [ 1.837357] ehci-exynos: EHCI EXYNOS driver [ 1.841692] ehci-atmel: EHCI Atmel driver [ 1.845813] tegra-ehci: Tegra EHCI driver [ 1.850125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.856317] ohci-pci: OHCI PCI platform driver [ 1.860810] ohci-platform: OHCI generic platform driver [ 1.866191] SPEAr-ohci: OHCI SPEAr driver [ 1.870335] ohci-st: OHCI STMicroelectronics driver [ 1.875332] ohci-atmel: OHCI Atmel driver [ 1.880004] usbcore: registered new interface driver usb-storage [ 1.892226] palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps65913@58:rtc as rtc0 [ 1.904014] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.911200] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.917863] i2c /dev entries driver [ 1.927567] sbs-battery 0-000b: sbs_probe: Failed to get device status [ 1.934131] sbs-battery: probe of 0-000b failed with error -121 [ 1.950147] sdhci: Secure Digital Host Controller Interface driver [ 1.956320] sdhci: Copyright(c) Pierre Ossman [ 1.962091] Synopsys Designware Multimedia Card Interface Driver [ 1.969242] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.975629] sdhci-tegra 78000400.sdhci: Got CD GPIO [ 1.980541] sdhci-tegra 78000400.sdhci: Got WP GPIO [ 1.993654] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.059538] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 2.076226] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.139438] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.148611] ledtrig-cpu: registered to indicate activity on CPUs [ 2.154997] usbcore: registered new interface driver usbhid [ 2.160583] usbhid: USB HID core driver [ 2.168018] NET: Registered protocol family 10 [ 2.173375] Segment Routing with IPv6 [ 2.177089] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.183535] NET: Registered protocol family 17 [ 2.187981] can: controller area network core (rev 20170425 abi 9) [ 2.194227] NET: Registered protocol family 29 [ 2.198665] can: raw protocol (rev 20170425) [ 2.202953] can: broadcast manager protocol (rev 20170425 t) [ 2.208611] can: netlink gateway (rev 20170425) max_hops=1 [ 2.214375] Key type dns_resolver registered [ 2.219147] ThumbEE CPU extension supported. [ 2.223441] Registering SWP/SWPB emulation handler [ 2.242080] usb1_vbus: supplied by vdd-sys-5v0 [ 2.244842] mmc0: new high speed SDHC card at address aaaa [ 2.245556] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 2.257520] usb2_vbus: supplied by vdd-sys-5v0 [ 2.264310] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.270119] mmcblk0: p1 p2 p3 [ 2.275444] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.282106] [drm] No driver support for vblank timestamp query. [ 2.290640] mmc1: new high speed MMC card at address 0001 [ 2.296487] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.301623] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.307795] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.314120] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.324565] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.400009] Console: switching to colour frame buffer device 240x75 [ 2.444002] drm drm: fb0: frame buffer device [ 2.448555] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.460938] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.466372] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.474219] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.509524] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.516598] hub 1-0:1.0: USB hub found [ 2.520469] hub 1-0:1.0: 1 port detected [ 2.526123] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.535162] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-07 12:26:14 UTC (947247974) [ 2.551271] dvdd_ts: disabling [ 2.554330] usb1_vbus: disabling [ 2.557555] vdd_cam_1v8_reg: disabling [ 2.563013] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 2.652352] EXT4-fs (mmcblk1p1): recovery complete [ 2.658870] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.667058] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 2.677838] devtmpfs: mounted [ 2.682718] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#