Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.051897179 -0700
+++ /tmp/foob	2017-08-15 22:42:48.055897195 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################
-	 3.2 MiB/s
+	 #############################
+	 3.1 MiB/s
 done
-Bytes transferred = 8037920 (7aa620 hex)
+Bytes transferred = 8050448 (7ad710 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7aa620 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7ad710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 15:18:23 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 22:34:19 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157c980, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157ca80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993552K/2096128K available (10240K kernel code, 1554K rwdata, 4452K rodata, 2048K init, 405K bss, 37040K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993552K/2096128K available (10240K kernel code, 1555K rwdata, 4460K rodata, 2048K init, 405K bss, 37040K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,7 +95,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1584b20   (1555 kB)
+      .data : 0xc1400000 - 0xc1584c20   (1556 kB)
        .bss : 0xc158dc08 - 0xc15f32bc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -389,7 +389,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-07 05:10:19 UTC (947221819)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-07 12:26:14 UTC (947247974)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.063897229 -0700
+++ /tmp/foob	2017-08-15 22:42:48.063897229 -0700
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 2.8 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 6161104 (5e02d0 hex)
+Bytes transferred = 6162832 (5e0990 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e02d0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e0990 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 15:18:31 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 22:34:29 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998568K/2096128K available (9216K kernel code, 732K rwdata, 2752K rodata, 1024K init, 300K bss, 32024K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998568K/2096128K available (9216K kernel code, 732K rwdata, 2756K rodata, 1024K init, 300K bss, 32024K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -384,7 +384,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-07 05:12:56 UTC (947221976)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-07 12:28:47 UTC (947248127)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -398,4 +398,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.130130] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.129805] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.071897264 -0700
+++ /tmp/foob	2017-08-15 22:42:48.071897264 -0700
@@ -34,21 +34,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################
+	 #############################
 	 3.9 MiB/s
 done
-Bytes transferred = 8037920 (7aa620 hex)
+Bytes transferred = 8050448 (7ad710 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 67181 (1066d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7aa620 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7ad710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301366c
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 15:18:23 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 22:34:19 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157c980, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157ca80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -80,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993432K/2096128K available (10240K kernel code, 1554K rwdata, 4452K rodata, 2048K init, 405K bss, 37160K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993432K/2096128K available (10240K kernel code, 1555K rwdata, 4460K rodata, 2048K init, 405K bss, 37160K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,7 +90,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1584b20   (1555 kB)
+      .data : 0xc1400000 - 0xc1584c20   (1556 kB)
        .bss : 0xc158dc08 - 0xc15f32bc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -451,89 +451,72 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+Unable to handle kernel NULL pointer dereference at virtual address 00000036
+pgd = c0204000
+[00000036] *pgd=00000000
+Internal error: Oops: 5 [#1] SMP ARM
+Modules linked in:
+CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 4.13.0-rc5-next-20170816-193209-g5d51332 #1
 ata1: SATA link down (SStatus 0 SControl 300)
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
-pci 0000:00:02.0: enabling Extended Tags
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
-pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
-pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: events deferred_probe_work_func
+task: ee366600 task.stack: ee640000
+PC is at pci_find_pcie_root_port+0x58/0x78
+LR is at pci_device_add+0x244/0x374
+pc : [<c06a1a28>]    lr : [<c069ffd8>]    psr: 60000113
+sp : ee641cc8  ip : ed0fbb90  fp : ed0eb760
+r10: ee209c10  r9 : ee209c10  r8 : 00000000
+r7 : 00000000  r6 : ed0e2868  r5 : ed0eb800  r4 : ed0e2800
+r3 : ed0eb800  r2 : 00000000  r1 : 60000113  r0 : ed0e2800
+Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
+Control: 10c5387d  Table: 8020406a  DAC: 00000051
+Process kworker/2:1 (pid: 53, stack limit = 0xee640220)
+Stack: (0xee641cc8 to 0xee642000)
+1cc0:                   00000046 00000002 60000113 c069c660 00000002 ed0eb800
+1ce0: ed0e2826 c069c97c ee641cfc c06a3b88 00000046 00000008 00001234 00000000
+1d00: ed0e2800 00000040 00008086 c069fb24 00000e12 00000001 00060400 00000000
+1d20: 01000000 00000000 00000604 c0b60400 ed0eb800 ed0e2800 ed0eb800 00000008
+1d40: ed0e2800 00000000 ee209c10 c06a0198 00000000 0e1210de 77359400 00000010
+1d60: ed0eb800 00000008 ed0fbb90 c06a020c ffff0001 00000010 ed0eb800 00000001
+1d80: ed0fbb90 c06a10f8 00000000 ed0eb800 00000001 ed0fbb90 00000003 c06a13b0
+1da0: ed0eb610 00000000 ed0eb410 c06bbf28 c1057060 ed0eb610 ed0fbc10 ed0fbc20
+1dc0: ed0eb410 ee209c10 ed0eb760 ed0eb610 ed0eb6ac ed0eb410 00000001 eefc863c
+1de0: c30004a4 c30004a4 00000007 00000002 20000000 3fffffff eefc8694 00002200
+1e00: 00000000 00000000 00000000 00000000 64647661 6c6c702d 6572652d 732d6566
+1e20: 6c707075 ed0f0079 00000000 00000000 c2000000 c04beb94 20000000 00000000
+1e40: 20000000 00000000 20000000 00000000 00002200 ee23d780 00000001 fffffffe
+1e60: ee209c10 fffffdfb c14ce9a0 00000000 00000012 c14ce9a0 c1581334 c0865b10
+1e80: c0865ac0 ee209c10 c15d415c c15d4160 00000000 c0864248 00000000 ee641ed0
+1ea0: c08643d8 00000001 c1542180 c15d415c c158dc60 c0862850 ee0ab46c ee4d25b8
+1ec0: ee209c10 ee209c44 c15421d8 c0863f88 ee209c10 00000001 ee366600 ee11d180
+1ee0: ee209c10 c15421d8 c1542164 c08635c4 ee11d180 c1542188 ee209c10 c08639c0
+1f00: ee11d180 c1542188 eefacc00 eefacc00 eefafc00 00000000 00000000 c035a928
+1f20: c0cc038c 2dc60000 ee11d180 ee11d180 ee11d198 00000001 eefacc00 ee11d198
+1f40: eefacc00 00000008 c1402d00 c035ac38 eefafcf5 ee11d180 eefacc18 c035ae60
+1f60: ee0f7ee0 ee0b1300 00000000 ee0b1300 00000000 ee0b12c0 ee0b131c ee11d180
+1f80: ee0f7ee0 c035ac48 00000000 c03601a4 ee0b12c0 c0360084 00000000 00000000
+1fa0: 00000000 00000000 00000000 c03082a0 00000000 00000000 00000000 00000000
+1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 7beffffe f7ddfbff
+[<c06a1a28>] (pci_find_pcie_root_port) from [<c069ffd8>] (pci_device_add+0x244/0x374)
+[<c069ffd8>] (pci_device_add) from [<c06a0198>] (pci_scan_single_device+0x90/0xa8)
+[<c06a0198>] (pci_scan_single_device) from [<c06a020c>] (pci_scan_slot+0x5c/0x10c)
+[<c06a020c>] (pci_scan_slot) from [<c06a10f8>] (pci_scan_child_bus+0x20/0xfc)
+[<c06a10f8>] (pci_scan_child_bus) from [<c06a13b0>] (pci_scan_root_bus_bridge+0x70/0xc0)
+[<c06a13b0>] (pci_scan_root_bus_bridge) from [<c06bbf28>] (tegra_pcie_probe+0x1200/0x1edc)
+[<c06bbf28>] (tegra_pcie_probe) from [<c0865b10>] (platform_drv_probe+0x50/0xb0)
+[<c0865b10>] (platform_drv_probe) from [<c0864248>] (driver_probe_device+0x238/0x2e4)
+[<c0864248>] (driver_probe_device) from [<c0862850>] (bus_for_each_drv+0x44/0x8c)
+[<c0862850>] (bus_for_each_drv) from [<c0863f88>] (__device_attach+0x9c/0x100)
+[<c0863f88>] (__device_attach) from [<c08635c4>] (bus_probe_device+0x84/0x8c)
+[<c08635c4>] (bus_probe_device) from [<c08639c0>] (deferred_probe_work_func+0x30/0x130)
+[<c08639c0>] (deferred_probe_work_func) from [<c035a928>] (process_one_work+0x144/0x42c)
+[<c035a928>] (process_one_work) from [<c035ac38>] (process_scheduled_works+0x28/0x38)
+[<c035ac38>] (process_scheduled_works) from [<c035ae60>] (worker_thread+0x218/0x4f0)
+[<c035ae60>] (worker_thread) from [<c03601a4>] (kthread+0x120/0x158)
+[<c03601a4>] (kthread) from [<c03082a0>] (ret_from_fork+0x14/0x34)
+Code: e5923008 e5931008 e3510000 1afffff4 (e1d203b6) 
+---[ end trace 4ac07678bab1a8f6 ]---
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:02:00.0: supports D1 D2
-pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
-PCI: bus2: Fast back to back transfers disabled
-pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
-pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
-pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
-pci 0000:00:01.0: PCI bridge to [bus 01]
-pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
-pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
-pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
-pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:02.0: PCI bridge to [bus 02]
-pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
-pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:01.0: enabling device (0140 -> 0142)
-pcieport 0000:00:01.0: Signaling PME with IRQ 393
-pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:02.0: enabling device (0140 -> 0143)
-pcieport 0000:00:02.0: Signaling PME with IRQ 394
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:02:00.0: enabling device (0140 -> 0143)
  mmcblk1: p1 p2 p3
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a6c000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
-r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-iommu: Adding device cpufreq-dt.0 to group 70
-cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
-cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
-+USB0_VBUS_SW: disabling
-+1.8V_RUN_CAM: disabling
-+2.8V_RUN_CAM: disabling
-+1.2V_RUN_CAM_FRONT: disabling
-+1.05V_RUN_CAM_REAR: disabling
-+3.3V_RUN_TOUCH: disabling
-+2.8V_RUN_CAM_AF: disabling
-+1.8V_RUN_VPP_FUSE: disabling
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.079897297 -0700
+++ /tmp/foob	2017-08-15 22:42:48.083897313 -0700
@@ -35,7 +35,7 @@
 	 ##############################
 	 4 MiB/s
 done
-Bytes transferred = 6161104 (5e02d0 hex)
+Bytes transferred = 6162832 (5e0990 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 67181 (1066d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e02d0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e0990 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301366c
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 15:18:31 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 22:34:29 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -78,7 +78,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998448K/2096128K available (9216K kernel code, 732K rwdata, 2752K rodata, 1024K init, 300K bss, 32144K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998448K/2096128K available (9216K kernel code, 732K rwdata, 2756K rodata, 1024K init, 300K bss, 32144K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -460,91 +460,76 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
-pci 0000:00:02.0: enabling Extended Tags
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
-pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
-pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+Unable to handle kernel NULL pointer dereference at virtual address 00000036
+pgd = c0004000
+[00000036] *pgd=00000000
+Internal error: Oops: 5 [#1] PREEMPT SMP ARM
+Modules linked in:
+CPU: 3 PID: 73 Comm: kworker/3:1 Not tainted 4.13.0-rc5-next-20170816-193209-g5d51332 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: events deferred_probe_work_func
+task: ee033180 task.stack: ee0c4000
+PC is at pci_find_pcie_root_port+0x58/0x78
+LR is at pci_device_add+0x244/0x374
+pc : [<c04070c8>]    lr : [<c0405678>]    psr: 60000113
+sp : ee0c5cc8  ip : ee3f0210  fp : ee396768
+r10: eea12010  r9 : eea12010  r8 : 00000000
+r7 : 00000000  r6 : ee3f4068  r5 : ee396000  r4 : ee3f4000
+r3 : ee396000  r2 : 00000000  r1 : 60000113  r0 : ee3f4000
+Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
+Control: 10c5387d  Table: 8000406a  DAC: 00000051
+Process kworker/3:1 (pid: 73, stack limit = 0xee0c4210)
+Stack: (0xee0c5cc8 to 0xee0c6000)
+5cc0:                   00000046 00000002 60000113 c0401d90 00000002 ee396000
+5ce0: ee3f4026 c04020ac ee0c5cfc c0409210 00000046 00000008 00001234 00000000
+5d00: ee3f4000 00000040 00008086 c04051c4 00000e12 00000001 00060400 00000000
+5d20: 01000000 00000000 00000604 c0680400 ee396000 ee3f4000 ee396000 00000008
+5d40: ee3f4000 00000000 eea12010 c0405838 00000000 0e1210de b2d05e00 00000010
+5d60: ee396000 00000008 ee3f0210 c04058ac ffff0001 00000010 ee396000 00000001
+5d80: ee3f0210 c0406798 00000000 ee396000 00000001 ee3f0210 00000003 c0406a50
+5da0: ee396610 00000000 ee396410 c041f554 c0bf101c ee396610 ee3f0190 ee3f01a0
+5dc0: ee396410 eea12010 ee396768 ee396610 ee3966ac ee396410 00000001 eefc763c
+5de0: c30004a4 c30004a4 00000007 00000002 20000000 3fffffff eefc7694 00002200
+5e00: 00000000 00000000 00000000 00000000 64647661 6c6c702d 6572652d 732d6566
+5e20: 6c707075 00000079 ee3f18c8 c02a665c c2000000 00000000 20000000 00000000
+5e40: 20000000 00000000 20000000 00000000 00002200 ee3f18c8 00000017 ffffffed
+5e60: eea12010 fffffdfb c0e4da40 00000000 00000017 c0e4da40 c0eb27d4 c04ea20c
+5e80: c04ea1bc eea12010 c0efe214 c0efe218 00000000 c04e891c 00000000 ee0c5ed0
+5ea0: c04e8aac 00000001 c0e68c80 c0efe214 c0ec15a0 c04e6f34 ee8c8570 eebf6d38
+5ec0: eea12010 eea12044 c0e68cd8 c04e865c eea12010 00000001 00000000 eebf6e00
+5ee0: eea12010 c0e68cd8 c0e68c60 c04e7c98 eebf6e00 c0e68c88 eea12010 c04e8094
+5f00: eebf6e00 c0e68c88 eefbcac0 eefbcac0 eefbfd00 00000000 00000000 c01395f0
+5f20: c092d51c eefbcac0 eebf6e00 eebf6e00 eebf6e18 00000001 eefbcac0 eebf6e18
+5f40: eefbcac0 00000008 c0e02d00 c0139990 eefbfdf5 eebf6e00 eefbcad8 c0139ba4
+5f60: ee91fee0 eebfc080 00000000 eebfc080 00000000 ee09e900 eebfc09c eebf6e00
+5f80: ee91fee0 c01399a0 00000000 c013ee98 ee09e900 c013ed78 00000000 00000000
+5fa0: 00000000 00000000 00000000 c0107ce0 00000000 00000000 00000000 00000000
+5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
+[<c04070c8>] (pci_find_pcie_root_port) from [<c0405678>] (pci_device_add+0x244/0x374)
+[<c0405678>] (pci_device_add) from [<c0405838>] (pci_scan_single_device+0x90/0xa8)
+[<c0405838>] (pci_scan_single_device) from [<c04058ac>] (pci_scan_slot+0x5c/0x10c)
+[<c04058ac>] (pci_scan_slot) from [<c0406798>] (pci_scan_child_bus+0x20/0xfc)
+[<c0406798>] (pci_scan_child_bus) from [<c0406a50>] (pci_scan_root_bus_bridge+0x70/0xc0)
+[<c0406a50>] (pci_scan_root_bus_bridge) from [<c041f554>] (tegra_pcie_probe+0x1200/0x1edc)
+[<c041f554>] (tegra_pcie_probe) from [<c04ea20c>] (platform_drv_probe+0x50/0xb0)
+[<c04ea20c>] (platform_drv_probe) from [<c04e891c>] (driver_probe_device+0x238/0x2e4)
+[<c04e891c>] (driver_probe_device) from [<c04e6f34>] (bus_for_each_drv+0x44/0x8c)
+[<c04e6f34>] (bus_for_each_drv) from [<c04e865c>] (__device_attach+0x9c/0x100)
+[<c04e865c>] (__device_attach) from [<c04e7c98>] (bus_probe_device+0x84/0x8c)
+[<c04e7c98>] (bus_probe_device) from [<c04e8094>] (deferred_probe_work_func+0x30/0x130)
+[<c04e8094>] (deferred_probe_work_func) from [<c01395f0>] (process_one_work+0x130/0x4a8)
+[<c01395f0>] (process_one_work) from [<c0139990>] (process_scheduled_works+0x28/0x38)
+[<c0139990>] (process_scheduled_works) from [<c0139ba4>] (worker_thread+0x204/0x4b4)
+[<c0139ba4>] (worker_thread) from [<c013ee98>] (kthread+0x120/0x158)
+[<c013ee98>] (kthread) from [<c0107ce0>] (ret_from_fork+0x14/0x34)
+Code: e5923008 e5931008 e3510000 1afffff4 (e1d203b6) 
+---[ end trace e951095fb1afce61 ]---
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
 mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
-pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:02:00.0: supports D1 D2
-pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus2: Fast back to back transfers disabled
-pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
-pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
-pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
-pci 0000:00:01.0: PCI bridge to [bus 01]
-pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk1: retrying using single block read
  mmcblk1: p1 p2 p3
-pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
-pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
-pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:02.0: PCI bridge to [bus 02]
-pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
-pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:01.0: enabling device (0140 -> 0142)
-pcieport 0000:00:01.0: Signaling PME with IRQ 393
-pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:02.0: enabling device (0140 -> 0143)
-pcieport 0000:00:02.0: Signaling PME with IRQ 394
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf09f8000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
-r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-iommu: Adding device cpufreq-dt.0 to group 73
-cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
-cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
-input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:39 UTC (946684899)
-+USB0_VBUS_SW: disabling
-+1.8V_RUN_CAM: disabling
-+2.8V_RUN_CAM: disabling
-+1.2V_RUN_CAM_FRONT: disabling
-+1.05V_RUN_CAM_REAR: disabling
-+3.3V_RUN_TOUCH: disabling
-+2.8V_RUN_CAM_AF: disabling
-+1.8V_RUN_VPP_FUSE: disabling
-ALSA device list:
-  #0: tegra-hda at 0x70038000 irq 346
-  #1: NVIDIA Tegra Jetson TK1
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.087897330 -0700
+++ /tmp/foob	2017-08-15 22:42:48.091897347 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -42,21 +42,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################
-	 3.5 MiB/s
+	 #############################
+	 3 MiB/s
 done
-Bytes transferred = 8037920 (7aa620 hex)
+Bytes transferred = 8050448 (7ad710 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.3 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 68203 (10a6b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7aa620 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7ad710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a6a
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 15:18:23 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 22:34:19 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c157c980, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157ca80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -89,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994448K/2097148K available (10240K kernel code, 1554K rwdata, 4452K rodata, 2048K init, 405K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994448K/2097148K available (10240K kernel code, 1555K rwdata, 4460K rodata, 2048K init, 405K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,7 +99,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1584b20   (1555 kB)
+      .data : 0xc1400000 - 0xc1584c20   (1556 kB)
        .bss : 0xc158dc08 - 0xc15f32bc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -370,9 +370,9 @@
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
 elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 NET: Registered protocol family 10
@@ -396,33 +396,34 @@
 +5V_VDD_TS_SW: supplied by +5V_SYS
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
+mmc0: new high speed MMC card at address 0001
 +3.3V_PANEL: supplied by +3.3V_RUN
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 +3.3V_LP0: supplied by +3.3V_SYS
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
 tegra-sor 54540000.sor: failed to probe output: -517
+elan_i2c 1-0015: failed to read report data: -121
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+elan_i2c 1-0015: failed to read report data: -121
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-elan_i2c 1-0015: invalid report id data (ff)
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+elan_i2c 1-0015: invalid report id data (ff)
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmc1: new high speed SDIO card at address 0001
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc2: new high speed SDHC card at address 0007
@@ -437,7 +438,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 07:17:37 UTC (946711057)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.095897365 -0700
+++ /tmp/foob	2017-08-15 22:42:48.099897382 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -43,18 +43,18 @@
 	 ##############################
 	 3.5 MiB/s
 done
-Bytes transferred = 6161104 (5e02d0 hex)
+Bytes transferred = 6162832 (5e0990 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68203 (10a6b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e02d0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e0990 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a6a
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 15:18:31 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 22:34:29 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -87,7 +87,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999464K/2097148K available (9216K kernel code, 732K rwdata, 2752K rodata, 1024K init, 300K bss, 32148K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999464K/2097148K available (9216K kernel code, 732K rwdata, 2756K rodata, 1024K init, 300K bss, 32148K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -381,7 +381,6 @@
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20170425 abi 9)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 29
 can: raw protocol (rev 20170425)
 can: broadcast manager protocol (rev 20170425 t)
@@ -434,9 +433,9 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -446,10 +445,11 @@
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Console: switching to colour frame buffer device 170x48
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
+input: gpio-keys as /devices/soc0/gpio-keys/input/input3
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 07:14:54 UTC (946710894)
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -459,19 +459,15 @@
 +5V_VDD_TS_SW: disabling
 ALSA device list:
   #1: GoogleNyanBig
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-usb 1-3: new high-speed USB device number 3 using tegra-xusb
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
-asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-usb 1-1: new high-speed USB device number 4 using tegra-xusb
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.617951] usb-storage 1-1:1.0: USB Mass Storage device detected
-scsi host0: usb-storage 1-1:1.0
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.103897398 -0700
+++ /tmp/foob	2017-08-15 22:42:48.107897415 -0700
@@ -47,10 +47,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################
+	 #############################
 	 4.1 MiB/s
 done
-Bytes transferred = 8037920 (7aa620 hex)
+Bytes transferred = 8050448 (7ad710 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -61,322 +61,10 @@
 done
 Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7aa620 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7ad710 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103cd
 
 Starting kernel ...
 
-Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 15:18:23 PDT 2017
-CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
-CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
-OF: fdt: Machine model: Compulab TrimSlice board
-debug: ignoring loglevel setting.
-Memory policy: Data cache writealloc
-efi: Getting EFI parameters from FDT:
-efi: UEFI not found.
-cma: Reserved 64 MiB at 0x3c000000
-On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c157c980, node_mem_map ef7f8000
-  DMA zone: 1536 pages used for memmap
-  DMA zone: 0 pages reserved
-  DMA zone: 196608 pages, LIFO batch:31
-  HighMem zone: 65536 pages, LIFO batch:15
-percpu: Embedded 17 pages/cpu @ef7c4000 s39424 r8192 d22016 u69632
-pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096
-pcpu-alloc: [0] 0 [0] 1 
-Built 1 zonelists, mobility grouping on.  Total pages: 260608
-Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
-PID hash table entries: 4096 (order: 2, 16384 bytes)
-Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
-Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954384K/1048576K available (10240K kernel code, 1554K rwdata, 4452K rodata, 2048K init, 405K bss, 28656K reserved, 65536K cma-reserved, 196608K highmem)
-Virtual kernel memory layout:
-    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
-    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
-    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
-    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
-    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d00000   (11232 kB)
-      .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1584b20   (1555 kB)
-       .bss : 0xc158dc08 - 0xc15f32bc   ( 406 kB)
-SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
-Hierarchical RCU implementation.
-	RCU event tracing is enabled.
-	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
-NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
-/interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
-L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
-L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
-L2C-310 errata 727915 769419 enabled
-L2C-310 enabling early BRESP for Cortex-A9
-L2C-310: enabling full line of zeros but not enabled in Cortex-A9
-L2C-310 ID prefetch enabled, offset 1 lines
-L2C-310 cache controller enabled, 8 ways, 1024 kB
-L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
-Switching to timer-based delay loop, resolution 1000ns
-Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
-pid_max: default: 32768 minimum: 301
-Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-CPU: Testing write buffer coherency: ok
-CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x300000 - 0x3000a0
-Hierarchical SRCU implementation.
-Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2
-EFI services will not be available.
-smp: Bringing up secondary CPUs ...
-CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-smp: Brought up 1 node, 2 CPUs
-SMP: Total of 2 processors activated (4.00 BogoMIPS).
-CPU: All CPU(s) started in SVC mode.
-devtmpfs: initialized
-VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
-clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
-futex hash table entries: 512 (order: 3, 32768 bytes)
-pinctrl core: initialized pinctrl subsystem
-DMI not present or invalid.
-random: get_random_u32 called from bucket_table_alloc+0xe8/0x254 with crng_init=0
-NET: Registered protocol family 16
-DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor menu
-No ATAGs?
-hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
-hw-breakpoint: maximum watchpoint size is 4 bytes.
-Serial: AMBA PL011 UART driver
-AT91: Could not find identification node
-usb1_vbus: Failed to request enable GPIO170: -517
-reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517
-vgaarb: loaded
-SCSI subsystem initialized
-libata version 3.00 loaded.
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
-pps_core: LinuxPPS API ver. 1 registered
-pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
-PTP clock support registered
-EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
-clocksource: Switched to clocksource timer_us
-NET: Registered protocol family 2
-TCP established hash table entries: 8192 (order: 3, 32768 bytes)
-TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
-TCP: Hash tables configured (established 8192 bind 8192)
-UDP hash table entries: 512 (order: 2, 16384 bytes)
-UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
-NET: Registered protocol family 1
-RPC: Registered named UNIX socket transport module.
-RPC: Registered udp transport module.
-RPC: Registered tcp transport module.
-RPC: Registered tcp NFSv4.1 backchannel transport module.
-PCI: CLS 0 bytes, default 64
-hw perfevents: no interrupt-affinity property for /pmu, guessing.
-hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
-workingset: timestamp_bits=30 max_order=18 bucket_order=0
-squashfs: version 4.0 (2009/01/31) Phillip Lougher
-NFS: Registering the id_resolver key type
-Key type id_resolver registered
-Key type id_legacy registered
-ntfs: driver 2.1.32 [Flags: R/O].
-random: fast init done
-bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
-io scheduler noop registered
-io scheduler deadline registered
-io scheduler cfq registered (default)
-io scheduler mq-deadline registered
-io scheduler kyber registered
-tegra-pcie 80003000.pcie: dual-mode configuration
-tegra-pcie 80003000.pcie: probing port 0, using 2 lanes
-tegra-pcie 80003000.pcie: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
-pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff]
-pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref]
-pci_bus 0000:00: root bus resource [bus 00-ff]
-pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: enabling Extended Tags
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
-pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref]
-pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
-pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:01.0: PCI bridge to [bus 01]
-pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa00fffff]
-pci 0000:00:01.0:   bridge window [mem 0xa8000000-0xa80fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-Disabling cpuidle LP2 state, since PCIe IRQs are in use
-pcieport 0000:00:01.0: enabling device (0140 -> 0143)
-pcieport 0000:00:01.0: Signaling PME with IRQ 295
-tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
-Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-console [ttyS0] disabled
-70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
-console [ttyS0] enabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
-STMicroelectronics ASC driver initialized
-tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-[drm] Cannot find any crtc or sizes
-brd: module loaded
-loop: module loaded
-m25p80 spi32766.0: found s25fl008k, expected w25q80bl
-m25p80 spi32766.0: s25fl008k (1024 Kbytes)
-libphy: Fixed MDIO Bus: probed
-CAN device driver interface
-bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
-e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
-e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
-igb: Copyright (c) 2007-2014 Intel Corporation.
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf0a5c000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
-usbcore: registered new interface driver pegasus
-usbcore: registered new interface driver asix
-usbcore: registered new interface driver ax88179_178a
-usbcore: registered new interface driver cdc_ether
-usbcore: registered new interface driver smsc75xx
-usbcore: registered new interface driver smsc95xx
-usbcore: registered new interface driver net1080
-usbcore: registered new interface driver cdc_subset
-usbcore: registered new interface driver zaurus
-usbcore: registered new interface driver cdc_ncm
-tegra-phy c5004000.usb-phy: no vbus regulator
-tegra-phy c5008000.usb-phy: no vbus regulator
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-ehci-platform: EHCI generic platform driver
-ehci-orion: EHCI orion driver
-SPEAr-ehci: EHCI SPEAr driver
-ehci-st: EHCI STMicroelectronics driver
-ehci-exynos: EHCI EXYNOS driver
-ehci-atmel: EHCI Atmel driver
-tegra-ehci: Tegra EHCI driver
-ulpi_phy_power_on: ulpi write failed
-tegra-ehci c5004000.usb: Failed to power on the phy
-tegra-ehci: probe of c5004000.usb failed with error -110
-tegra-ehci c5008000.usb: EHCI Host Controller
-tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
-tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-ohci-pci: OHCI PCI platform driver
-ohci-platform: OHCI generic platform driver
-SPEAr-ohci: OHCI SPEAr driver
-ohci-st: OHCI STMicroelectronics driver
-ohci-atmel: OHCI Atmel driver
-usbcore: registered new interface driver usb-storage
-rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
-tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
-i2c /dev entries driver
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-Synopsys Designware Multimedia Card Interface Driver
-sdhci-pltfm: SDHCI platform and OF driver helper
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
-sdhci-tegra c8000600.sdhci: Got CD GPIO
-sdhci-tegra c8000600.sdhci: Got WP GPIO
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
-ledtrig-cpu: registered to indicate activity on CPUs
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-NET: Registered protocol family 10
-Segment Routing with IPv6
-sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
-NET: Registered protocol family 17
-can: controller area network core (rev 20170425 abi 9)
-NET: Registered protocol family 29
-can: raw protocol (rev 20170425)
-can: broadcast manager protocol (rev 20170425 t)
-can: netlink gateway (rev 20170425) max_hops=1
-Key type dns_resolver registered
-ThumbEE CPU extension supported.
-Registering SWP/SWPB emulation handler
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci c5000000.usb: EHCI Host Controller
-tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: hctosys: unable to read the hardware clock
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
-mmcblk1: retrying using single block read
- mmcblk1: p1 p2
-Waiting for root device PARTUUID=11eb23c1-01...
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
-mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
-asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
-mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
-mmcblk0: retrying using single block read
- mmcblk0: p1
-mmcblk0: r/w command failed, status = 0x80000900
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/#  
-root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.111897433 -0700
+++ /tmp/foob	2017-08-15 22:42:48.115897449 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,18 +48,18 @@
 	 ##############################
 	 3.3 MiB/s
 done
-Bytes transferred = 6161104 (5e02d0 hex)
+Bytes transferred = 6162832 (5e0990 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 74.2 KiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5e02d0 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5e0990 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103cd
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 15:18:31 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 22:34:29 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -90,7 +90,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959396K/1048576K available (9216K kernel code, 732K rwdata, 2752K rodata, 1024K init, 300K bss, 23644K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959396K/1048576K available (9216K kernel code, 732K rwdata, 2756K rodata, 1024K init, 300K bss, 23644K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -202,174 +202,87 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
-pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref]
-pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
-pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:01.0: PCI bridge to [bus 01]
-pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa00fffff]
-pci 0000:00:01.0:   bridge window [mem 0xa8000000-0xa80fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-Disabling cpuidle LP2 state, since PCIe IRQs are in use
-pcieport 0000:00:01.0: enabling device (0140 -> 0143)
-pcieport 0000:00:01.0: Signaling PME with IRQ 295
-tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
-Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-console [ttyS0] disabled
-70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
-console [ttyS0] enabled
-console [ttyS0] enabled
-bootconsole [earlycon0] disabled
-bootconsole [earlycon0] disabled
-tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes
-[drm] Cannot find any crtc or sizes
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-loop: module loaded
-m25p80 spi32766.0: found s25fl008k, expected w25q80bl
-m25p80 spi32766.0: s25fl008k (1024 Kbytes)
-libphy: Fixed MDIO Bus: probed
-CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
-igb: Copyright (c) 2007-2014 Intel Corporation.
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf0863000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
-usbcore: registered new interface driver pegasus
-usbcore: registered new interface driver asix
-usbcore: registered new interface driver ax88179_178a
-usbcore: registered new interface driver cdc_ether
-usbcore: registered new interface driver smsc75xx
-usbcore: registered new interface driver smsc95xx
-usbcore: registered new interface driver net1080
-usbcore: registered new interface driver cdc_subset
-usbcore: registered new interface driver zaurus
-usbcore: registered new interface driver cdc_ncm
-tegra-phy c5004000.usb-phy: no vbus regulator
-tegra-phy c5008000.usb-phy: no vbus regulator
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-tegra-ehci: Tegra EHCI driver
-ulpi_phy_power_on: ulpi write failed
-tegra-ehci c5004000.usb: Failed to power on the phy
-tegra-ehci: probe of c5004000.usb failed with error -110
-tegra-ehci c5008000.usb: EHCI Host Controller
-tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
-tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-usbcore: registered new interface driver cdc_acm
-cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
-usbcore: registered new interface driver cdc_wdm
-usbcore: registered new interface driver usb-storage
-rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
-tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
-i2c /dev entries driver
-usbcore: registered new interface driver uvcvideo
-USB Video Class driver (1.1.1)
-gspca_main: v2.14.0 registered
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-sdhci-pltfm: SDHCI platform and OF driver helper
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
-sdhci-tegra c8000600.sdhci: Got CD GPIO
-sdhci-tegra c8000600.sdhci: Got WP GPIO
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
-NET: Registered protocol family 10
-Segment Routing with IPv6
-mip6: Mobile IPv6
-sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
-NET: Registered protocol family 17
-NET: Registered protocol family 15
-can: controller area network core (rev 20170425 abi 9)
-NET: Registered protocol family 29
-can: raw protocol (rev 20170425)
-can: broadcast manager protocol (rev 20170425 t)
-can: netlink gateway (rev 20170425) max_hops=1
-Bluetooth: RFCOMM socket layer initialized
-Bluetooth: RFCOMM ver 1.11
-Bluetooth: BNEP (Ethernet Emulation) ver 1.3
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-Bluetooth: BNEP socket layer initialized
-Bluetooth: HIDP (Human Interface Emulation) ver 1.2
-Bluetooth: HIDP socket layer initialized
-Key type dns_resolver registered
-Registering SWP/SWPB emulation handler
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci c5000000.usb: EHCI Host Controller
-tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
-tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: hctosys: unable to read the hardware clock
-ALSA device list:
-  #0: tegra-trimslice
-mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
-mmcblk1: retrying using single block read
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
- mmcblk1: p1 p2
-Waiting for root device PARTUUID=11eb23c1-01...
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
-mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
-asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
-mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
-mmcblk0: retrying using single block read
- mmcblk0: p1
-mmcblk0: r/w command failed, status = 0x80000900
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/#  
-root@(none):/# 
\ No newline at end of file
+Unable to handle kernel NULL pointer dereference at virtual address 00000036
+pgd = c0004000
+[00000036] *pgd=00000000
+Internal error: Oops: 5 [#1] PREEMPT SMP ARM
+Modules linked in:
+CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc5-next-20170816-193209-g5d51332 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+task: ef085740 task.stack: ef098000
+PC is at pci_find_pcie_root_port+0x58/0x78
+LR is at pci_device_add+0x244/0x374
+pc : [<c04070c8>]    lr : [<c0405678>]    psr: 60000013
+sp : ef099cd0  ip : ef3a7510  fp : ef39ef68
+r10: ef1b5010  r9 : ef1b5010  r8 : 00000000
+r7 : 00000000  r6 : ef39f068  r5 : ef39e800  r4 : ef39f000
+r3 : ef39e800  r2 : 00000000  r1 : 60000013  r0 : ef39f000
+Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
+Control: 10c5387d  Table: 0000404a  DAC: 00000051
+Process swapper/0 (pid: 1, stack limit = 0xef098210)
+Stack: (0xef099cd0 to 0xef09a000)
+9cc0:                                     00000046 00000002 60000013 c0401d90
+9ce0: 00000002 ef39e800 ef39f026 c04020ac ef099d04 c0409210 00000046 00000008
+9d00: 00001234 00000000 ef39f000 00000040 00008086 c04051c4 00000bf0 00000001
+9d20: 00060000 00000000 01000000 00000000 00000604 c0680400 ef39e800 ef39f000
+9d40: ef39e800 00000008 ef39f000 00000000 ef1b5010 c0405838 00000000 0bf010de
+9d60: 00000000 00000010 ef39e800 00000008 ef3a7510 c04058ac ffff0001 00000010
+9d80: ef39e800 00000001 ef3a7510 c0406798 00000000 ef39e800 00000001 ef3a7510
+9da0: 00000003 c0406a50 ef39ee10 00000000 ef39ec10 c041f554 c0bf101c ef39ee10
+9dc0: ef3a7510 00000000 ef39ec10 ef1b5010 ef39ef68 ef39ee10 ef39eeac ef39ec10
+9de0: 00000002 ef7f2ed0 c240bac8 c240bac8 00000006 00000001 a8000000 bfffffff
+9e00: ef7f2f28 00002200 00000000 00000000 00000000 00000000 69646476 65702d6f
+9e20: 6c632d78 75732d6b 796c7070 00000000 ef3a8468 c02a665c c2000000 00000000
+9e40: a8000000 00000000 a8000000 00000000 18000000 00000000 00002200 ef3a8468
+9e60: 00000000 ffffffed ef1b5010 fffffdfb c0e4da40 00000000 00000000 c0e4da40
+9e80: 00000000 c04ea20c c04ea1bc ef1b5010 c0efe214 c0efe218 00000000 c04e891c
+9ea0: ef1b5010 c0e4da40 ef1b5044 00000000 0000010f c0d6983c c0d005a4 c04e8a74
+9ec0: 00000000 c0e4da40 c04e89c8 c04e6fd0 ef020a5c ef1b1fb4 c0e4da40 ef3a7580
+9ee0: c0e68cd8 c04e7e74 c0bf0ee8 c0e4da40 00000006 c0e4da40 00000006 c0d2be98
+9f00: 00000000 c04e95ec c04e9e64 c0d81e34 00000006 c0101b8c 00000000 c0cb0114
+9f20: 00000100 efffcd2c c0cb0114 0000010f efffcd3a c013e5ec c0caebe8 00000000
+9f40: 00000006 00000006 efffcd2c efffcd31 c0e0dcd0 efffccc0 00000006 c0d6982c
+9f60: c0d81e34 00000006 c0d69830 c0ec1580 0000010f c0d00d90 00000006 00000006
+9f80: 00000000 c0d005a4 00000000 c092b2bc 00000000 00000000 00000000 00000000
+9fa0: 00000000 c092b2c4 00000000 c0107ce0 00000000 00000000 00000000 00000000
+9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 40000801 00442000
+[<c04070c8>] (pci_find_pcie_root_port) from [<c0405678>] (pci_device_add+0x244/0x374)
+[<c0405678>] (pci_device_add) from [<c0405838>] (pci_scan_single_device+0x90/0xa8)
+[<c0405838>] (pci_scan_single_device) from [<c04058ac>] (pci_scan_slot+0x5c/0x10c)
+[<c04058ac>] (pci_scan_slot) from [<c0406798>] (pci_scan_child_bus+0x20/0xfc)
+[<c0406798>] (pci_scan_child_bus) from [<c0406a50>] (pci_scan_root_bus_bridge+0x70/0xc0)
+[<c0406a50>] (pci_scan_root_bus_bridge) from [<c041f554>] (tegra_pcie_probe+0x1200/0x1edc)
+[<c041f554>] (tegra_pcie_probe) from [<c04ea20c>] (platform_drv_probe+0x50/0xb0)
+[<c04ea20c>] (platform_drv_probe) from [<c04e891c>] (driver_probe_device+0x238/0x2e4)
+[<c04e891c>] (driver_probe_device) from [<c04e8a74>] (__driver_attach+0xac/0xb0)
+[<c04e8a74>] (__driver_attach) from [<c04e6fd0>] (bus_for_each_dev+0x54/0x88)
+[<c04e6fd0>] (bus_for_each_dev) from [<c04e7e74>] (bus_add_driver+0xec/0x1f8)
+[<c04e7e74>] (bus_add_driver) from [<c04e95ec>] (driver_register+0x78/0xf4)
+[<c04e95ec>] (driver_register) from [<c0101b8c>] (do_one_initcall+0x3c/0x168)
+[<c0101b8c>] (do_one_initcall) from [<c0d00d90>] (kernel_init_freeable+0x10c/0x1d0)
+[<c0d00d90>] (kernel_init_freeable) from [<c092b2c4>] (kernel_init+0x8/0x114)
+[<c092b2c4>] (kernel_init) from [<c0107ce0>] (ret_from_fork+0x14/0x34)
+Code: e5923008 e5931008 e3510000 1afffff4 (e1d203b6) 
+---[ end trace 5012144829e1eb89 ]---
+Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
+
+CPU0: stopping
+CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D         4.13.0-rc5-next-20170816-193209-g5d51332 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c01110d0>] (unwind_backtrace) from [<c010c094>] (show_stack+0x10/0x14)
+[<c010c094>] (show_stack) from [<c0917cb8>] (dump_stack+0x84/0xa4)
+[<c0917cb8>] (dump_stack) from [<c010f620>] (handle_IPI+0x18c/0x39c)
+[<c010f620>] (handle_IPI) from [<c010142c>] (gic_handle_irq+0x84/0x90)
+[<c010142c>] (gic_handle_irq) from [<c010cc4c>] (__irq_svc+0x6c/0xa8)
+Exception stack(0xc0e01f38 to 0xc0e01f80)
+1f20:                                                       00000001 00000000
+1f40: c0e01f90 c011a3e0 c0e03ccc c0e03c68 c0d8b378 c0e03cd8 c0eb230c 00000000
+1f60: 00000001 00000000 2ea40000 c0e01f88 c0108758 c010875c 60000013 ffffffff
+[<c010cc4c>] (__irq_svc) from [<c010875c>] (arch_cpu_idle+0x30/0x3c)
+[<c010875c>] (arch_cpu_idle) from [<c0160d9c>] (do_idle+0x148/0x204)
+[<c0160d9c>] (do_idle) from [<c01610e0>] (cpu_startup_entry+0x18/0x1c)
+[<c01610e0>] (cpu_startup_entry) from [<c0d00c1c>] (start_kernel+0x348/0x3b0)
+[<c0d00c1c>] (start_kernel) from [<0000807c>] (0x807c)
+---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
+
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.119897465 -0700
+++ /tmp/foob	2017-08-15 22:42:48.123897483 -0700
@@ -39,10 +39,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################
+	 #############################
 	 3.3 MiB/s
 done
-Bytes transferred = 8037920 (7aa620 hex)
+Bytes transferred = 8050448 (7ad710 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -53,7 +53,7 @@
 done
 Bytes transferred = 51848 (ca88 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7aa620 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7ad710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa87 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 15:18:23 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Aug 15 22:34:19 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157c980, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157ca80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993472K/2096128K available (10240K kernel code, 1554K rwdata, 4452K rodata, 2048K init, 405K bss, 37120K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993472K/2096128K available (10240K kernel code, 1555K rwdata, 4460K rodata, 2048K init, 405K bss, 37120K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,7 +94,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1584b20   (1555 kB)
+      .data : 0xc1400000 - 0xc1584c20   (1556 kB)
        .bss : 0xc158dc08 - 0xc15f32bc   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -398,67 +398,68 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
-pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:01.0: PCI bridge to [bus 01]
-pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:01.0: enabling device (0140 -> 0143)
-pcieport 0000:00:01.0: Signaling PME with IRQ 374
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0a16000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
-[drm] Cannot find any crtc or sizes
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
-vdd_sata,avdd_plle: disabling
-usb1_vbus: disabling
-EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
-EXT4-fs (mmcblk1p1): recovery complete
-EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    4.464006] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Unable to handle kernel NULL pointer dereference at virtual address 00000036
+pgd = c0204000
+[00000036] *pgd=00000000
+Internal error: Oops: 5 [#1] SMP ARM
+Modules linked in:
+CPU: 2 PID: 54 Comm: kworker/2:1 Not tainted 4.13.0-rc5-next-20170816-193209-g5d51332 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: events deferred_probe_work_func
+task: ee3d5a00 task.stack: ee636000
+PC is at pci_find_pcie_root_port+0x58/0x78
+LR is at pci_device_add+0x244/0x374
+pc : [<c06a1a28>]    lr : [<c069ffd8>]    psr: 60000113
+sp : ee637cc8  ip : ee11ad10  fp : ee142360
+r10: 00000000  r9 : ee217c10  r8 : 00000000
+r7 : 00000000  r6 : ed0e0868  r5 : ee142400  r4 : ed0e0800
+r3 : ee142400  r2 : 00000000  r1 : 60000113  r0 : ed0e0800
+Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
+Control: 10c5387d  Table: 8020404a  DAC: 00000051
+Process kworker/2:1 (pid: 54, stack limit = 0xee636220)
+Stack: (0xee637cc8 to 0xee638000)
+7cc0:                   00000046 00000002 60000113 c069c660 00000002 ee142400
+7ce0: ed0e0826 c069c97c ee637cfc c06a3b88 00000046 00000008 00001234 00000000
+7d00: ed0e0800 00000040 00008086 c069fb24 00000e1c 00000001 00060400 00000000
+7d20: 01000000 00000000 00000604 c0b60400 ee142400 ed0e0800 ee142400 00000008
+7d40: ed0e0800 00000000 00000000 c06a0198 00000139 0e1c10de ee11ad90 00000010
+7d60: ee142400 00000008 ee11ad10 c06a020c ffff0001 00000010 ee142400 00000001
+7d80: ee11ad10 c06a10f8 00000000 ee142400 00000001 ee11ad10 ee217c10 c06a13b0
+7da0: ee142210 00000000 ee142010 c06bbf28 c1057060 ee142210 ee11ad90 00000000
+7dc0: ee142010 ee217c10 ee142360 ee142210 ee1422ac ee142010 00000002 eefce79c
+7de0: cfff043c cfff043c 00000006 00000001 28000000 3fffffff eefce7f4 00002200
+7e00: 00000000 00000000 00000000 00000000 2d646476 62786570 7075732d 00796c70
+7e20: 796c7000 ee125700 00000000 00000000 c2000000 c04beb94 28000000 00000000
+7e40: 28000000 00000000 18000000 00000000 00002200 ee1fb780 00000001 fffffffe
+7e60: ee217c10 fffffdfb c14ce9a0 00000000 0000000a c14ce9a0 c1581334 c0865b10
+7e80: c0865ac0 ee217c10 c15d415c c15d4160 00000000 c0864248 00000000 ee637ed0
+7ea0: c08643d8 00000001 c1542180 c15d415c c158dc60 c0862850 ee091f6c ee4d5cb8
+7ec0: ee217c10 ee217c44 c15421d8 c0863f88 ee217c10 00000001 eefb0c80 ee11a180
+7ee0: ee217c10 c15421d8 c1542164 c08635c4 ee11a180 c1542188 ee217c10 c08639c0
+7f00: ee11a180 c1542188 eefb2c00 eefb2c00 eefb5c00 00000000 00000000 c035a928
+7f20: ee11a180 c0cc0334 ee11a180 ee11a180 ee11a198 00000001 eefb2c00 ee11a198
+7f40: eefb2c00 00000008 c1402d00 c035ac38 eefb5cf5 ee11a180 eefb2c18 c035ae60
+7f60: ee0fbee0 ee118300 00000000 ee118300 00000000 ee1182c0 ee11831c ee11a180
+7f80: ee0fbee0 c035ac48 00000000 c03601a4 ee1182c0 c0360084 00000000 00000000
+7fa0: 00000000 00000000 00000000 c03082a0 00000000 00000000 00000000 00000000
+7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 fffffffd ffff7dff
+[<c06a1a28>] (pci_find_pcie_root_port) from [<c069ffd8>] (pci_device_add+0x244/0x374)
+[<c069ffd8>] (pci_device_add) from [<c06a0198>] (pci_scan_single_device+0x90/0xa8)
+[<c06a0198>] (pci_scan_single_device) from [<c06a020c>] (pci_scan_slot+0x5c/0x10c)
+[<c06a020c>] (pci_scan_slot) from [<c06a10f8>] (pci_scan_child_bus+0x20/0xfc)
+[<c06a10f8>] (pci_scan_child_bus) from [<c06a13b0>] (pci_scan_root_bus_bridge+0x70/0xc0)
+[<c06a13b0>] (pci_scan_root_bus_bridge) from [<c06bbf28>] (tegra_pcie_probe+0x1200/0x1edc)
+[<c06bbf28>] (tegra_pcie_probe) from [<c0865b10>] (platform_drv_probe+0x50/0xb0)
+[<c0865b10>] (platform_drv_probe) from [<c0864248>] (driver_probe_device+0x238/0x2e4)
+[<c0864248>] (driver_probe_device) from [<c0862850>] (bus_for_each_drv+0x44/0x8c)
+[<c0862850>] (bus_for_each_drv) from [<c0863f88>] (__device_attach+0x9c/0x100)
+[<c0863f88>] (__device_attach) from [<c08635c4>] (bus_probe_device+0x84/0x8c)
+[<c08635c4>] (bus_probe_device) from [<c08639c0>] (deferred_probe_work_func+0x30/0x130)
+[<c08639c0>] (deferred_probe_work_func) from [<c035a928>] (process_one_work+0x144/0x42c)
+[<c035a928>] (process_one_work) from [<c035ac38>] (process_scheduled_works+0x28/0x38)
+[<c035ac38>] (process_scheduled_works) from [<c035ae60>] (worker_thread+0x218/0x4f0)
+[<c035ae60>] (worker_thread) from [<c03601a4>] (kthread+0x120/0x158)
+[<c03601a4>] (kthread) from [<c03082a0>] (ret_from_fork+0x14/0x34)
+Code: e5923008 e5931008 e3510000 1afffff4 (e1d203b6) 
+---[ end trace 1db0f32c9af8149d ]---
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-08-15 22:42:48.127897500 -0700
+++ /tmp/foob	2017-08-15 22:42:48.131897518 -0700
@@ -27,7 +27,6 @@
 Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
 Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.tegra_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'zImage.tegra_defconfig'.
@@ -39,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 3.3 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 6161104 (5e02d0 hex)
+Bytes transferred = 6162832 (5e0990 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -52,7 +51,7 @@
 done
 Bytes transferred = 51848 (ca88 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e02d0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e0990 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa87 ... OK
@@ -61,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.13.0-rc5-next-20170815-193001-g4972470 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 15:18:31 PDT 2017
+Linux version 4.13.0-rc5-next-20170816-193209-g5d51332 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Aug 15 22:34:29 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998488K/2096128K available (9216K kernel code, 732K rwdata, 2752K rodata, 1024K init, 300K bss, 32104K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998488K/2096128K available (9216K kernel code, 732K rwdata, 2756K rodata, 1024K init, 300K bss, 32104K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -394,69 +393,68 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
-pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:01.0: PCI bridge to [bus 01]
-pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:01.0: enabling device (0140 -> 0143)
-pcieport 0000:00:01.0: Signaling PME with IRQ 374
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
-[drm] Cannot find any crtc or sizes
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
-vdd_sata,avdd_plle: disabling
-usb1_vbus: disabling
-ALSA device list:
-  #0: NVIDIA Tegra Beaver
-EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
-EXT4-fs (mmcblk1p1): recovery complete
-EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    4.724397] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Unable to handle kernel NULL pointer dereference at virtual address 00000036
+pgd = c0004000
+[00000036] *pgd=00000000
+Internal error: Oops: 5 [#1] PREEMPT SMP ARM
+Modules linked in:
+CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 4.13.0-rc5-next-20170816-193209-g5d51332 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: events deferred_probe_work_func
+task: ee9f4740 task.stack: eea0e000
+PC is at pci_find_pcie_root_port+0x58/0x78
+LR is at pci_device_add+0x244/0x374
+pc : [<c04070c8>]    lr : [<c0405678>]    psr: 60000013
+sp : eea0fcc8  ip : ee30de10  fp : ee318b68
+r10: 00000000  r9 : ee9fae10  r8 : 00000000
+r7 : 00000000  r6 : ee322068  r5 : ee318400  r4 : ee322000
+r3 : ee318400  r2 : 00000000  r1 : 60000013  r0 : ee322000
+Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
+Control: 10c5387d  Table: 8000404a  DAC: 00000051
+Process kworker/0:1 (pid: 30, stack limit = 0xeea0e210)
+Stack: (0xeea0fcc8 to 0xeea10000)
+fcc0:                   00000046 00000002 60000013 c0401d90 00000002 ee318400
+fce0: ee322026 c04020ac eea0fcfc c0409210 00000046 00000008 00001234 00000000
+fd00: ee322000 00000040 00008086 c04051c4 00000e1c 00000001 00060400 00000000
+fd20: 01000000 00000000 00000604 c0680400 ee318400 ee322000 ee318400 00000008
+fd40: ee322000 00000000 00000000 c0405838 eea0fd9c 0e1c10de 00000001 00000010
+fd60: ee318400 00000008 ee30de10 c04058ac ffff0001 00000010 ee318400 00000001
+fd80: ee30de10 c0406798 00000000 ee318400 00000001 ee30de10 ee9fae10 c0406a50
+fda0: ee318a10 00000000 ee318810 c041f554 c0bf101c ee318a10 ee30dd90 00000000
+fdc0: ee318810 ee9fae10 ee318b68 ee318a10 ee318aac ee318810 00000002 eefcd79c
+fde0: cfff043c cfff043c 00000006 00000001 28000000 3fffffff eefcd7f4 00002200
+fe00: 00000000 00000000 00000000 00000000 2d646476 62786570 7075732d 00796c70
+fe20: 796c7000 00000000 ee319238 c02a665c c2000000 00000000 28000000 00000000
+fe40: 28000000 00000000 18000000 00000000 00002200 ee319238 00000008 ffffffed
+fe60: ee9fae10 fffffdfb c0e4da40 00000000 00000008 c0e4da40 c0eb27d4 c04ea20c
+fe80: c04ea1bc ee9fae10 c0efe214 c0efe218 00000000 c04e891c 00000000 eea0fed0
+fea0: c04e8aac 00000001 c0e68c80 c0efe214 c0ec15a0 c04e6f34 ee8fea70 ee0972b8
+fec0: ee9fae10 ee9fae44 c0e68cd8 c04e865c ee9fae10 00000001 00000000 ee9f0b80
+fee0: ee9fae10 c0e68cd8 c0e68c60 c04e7c98 ee9f0b80 c0e68c88 ee9fae10 c04e8094
+ff00: ee9f0b80 c0e68c88 eef8fac0 eef8fac0 eef92d00 00000000 00000000 c01395f0
+ff20: c092d51c 00000000 ee9f0b80 ee9f0b80 ee9f0b98 00000001 eef8fac0 ee9f0b98
+ff40: eef8fac0 00000008 c0e02d00 c0139990 eef92df5 ee9f0b80 eef8fad8 c0139ba4
+ff60: ee8a7ee0 ee917380 00000000 ee917380 00000000 ee9de140 ee91739c ee9f0b80
+ff80: ee8a7ee0 c01399a0 00000000 c013ee98 ee9de140 c013ed78 00000000 00000000
+ffa0: 00000000 00000000 00000000 c0107ce0 00000000 00000000 00000000 00000000
+ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
+[<c04070c8>] (pci_find_pcie_root_port) from [<c0405678>] (pci_device_add+0x244/0x374)
+[<c0405678>] (pci_device_add) from [<c0405838>] (pci_scan_single_device+0x90/0xa8)
+[<c0405838>] (pci_scan_single_device) from [<c04058ac>] (pci_scan_slot+0x5c/0x10c)
+[<c04058ac>] (pci_scan_slot) from [<c0406798>] (pci_scan_child_bus+0x20/0xfc)
+[<c0406798>] (pci_scan_child_bus) from [<c0406a50>] (pci_scan_root_bus_bridge+0x70/0xc0)
+[<c0406a50>] (pci_scan_root_bus_bridge) from [<c041f554>] (tegra_pcie_probe+0x1200/0x1edc)
+[<c041f554>] (tegra_pcie_probe) from [<c04ea20c>] (platform_drv_probe+0x50/0xb0)
+[<c04ea20c>] (platform_drv_probe) from [<c04e891c>] (driver_probe_device+0x238/0x2e4)
+[<c04e891c>] (driver_probe_device) from [<c04e6f34>] (bus_for_each_drv+0x44/0x8c)
+[<c04e6f34>] (bus_for_each_drv) from [<c04e865c>] (__device_attach+0x9c/0x100)
+[<c04e865c>] (__device_attach) from [<c04e7c98>] (bus_probe_device+0x84/0x8c)
+[<c04e7c98>] (bus_probe_device) from [<c04e8094>] (deferred_probe_work_func+0x30/0x130)
+[<c04e8094>] (deferred_probe_work_func) from [<c01395f0>] (process_one_work+0x130/0x4a8)
+[<c01395f0>] (process_one_work) from [<c0139990>] (process_scheduled_works+0x28/0x38)
+[<c0139990>] (process_scheduled_works) from [<c0139ba4>] (worker_thread+0x204/0x4b4)
+[<c0139ba4>] (worker_thread) from [<c013ee98>] (kthread+0x120/0x158)
+[<c013ee98>] (kthread) from [<c0107ce0>] (ret_from_fork+0x14/0x34)
+Code: e5923008 e5931008 e3510000 1afffff4 (e1d203b6) 
+---[ end trace 54b28eeeb262cd41 ]---
