U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################### 3.1 MiB/s done Bytes transferred = 8016472 (7a5258 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 68183 (10a57 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7a5258 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a56 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-rc1-next-20170719-186761-gc981f0b (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jul 18 22:03:59 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c157ed80, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @eef81000 s39360 r8192 d22080 u69632 [ 0.000000] pcpu-alloc: s39360 r8192 d22080 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994448K/2097148K available (10240K kernel code, 1562K rwdata, 4460K rodata, 2048K init, 402K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1586ba0 (1563 kB) [ 0.000000] .bss : 0xc158fca4 - 0xc15f46fc ( 403 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001732] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001739] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001746] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001751] Switching to timer-based delay loop, resolution 83ns [ 0.001969] Console: colour dummy device 80x30 [ 0.001983] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.001990] pid_max: default: 32768 minimum: 301 [ 0.002025] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002031] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002217] CPU: Testing write buffer coherency: ok [ 0.002339] /cpus/cpu@0 missing clock-frequency property [ 0.002355] /cpus/cpu@1 missing clock-frequency property [ 0.002369] /cpus/cpu@2 missing clock-frequency property [ 0.002384] /cpus/cpu@3 missing clock-frequency property [ 0.002389] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002505] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003213] Hierarchical SRCU implementation. [ 0.003891] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004161] EFI services will not be available. [ 0.004220] smp: Bringing up secondary CPUs ... [ 0.004444] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011937] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021951] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031727] smp: Brought up 1 node, 4 CPUs [ 0.031735] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031738] CPU: All CPU(s) started in SVC mode. [ 0.032289] devtmpfs: initialized [ 0.037941] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038149] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038717] pinctrl core: initialized pinctrl subsystem [ 0.039373] DMI not present or invalid. [ 0.039453] random: get_random_u32 called from bucket_table_alloc+0xe8/0x254 with crng_init=0 [ 0.039489] NET: Registered protocol family 16 [ 0.040236] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041205] cpuidle: using governor menu [ 0.050237] No ATAGs? [ 0.050289] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.050295] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.053127] Serial: AMBA PL011 UART driver [ 0.053487] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.059000] AT91: Could not find identification node [ 0.059213] +5V_SYS: supplied by +VDD_MUX [ 0.059315] +3.3V_SYS: supplied by +VDD_MUX [ 0.059536] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.059542] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.059576] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.059581] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.059615] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.059620] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.059653] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.059658] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.059749] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.059754] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.059787] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.059791] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.060809] vgaarb: loaded [ 0.061090] SCSI subsystem initialized [ 0.061156] libata version 3.00 loaded. [ 0.061244] usbcore: registered new interface driver usbfs [ 0.061267] usbcore: registered new interface driver hub [ 0.061293] usbcore: registered new device driver usb [ 0.062638] pps_core: LinuxPPS API ver. 1 registered [ 0.062642] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.062650] PTP clock support registered [ 0.062716] EDAC MC: Ver: 3.0.0 [ 0.062845] dmi: Firmware registration failed. [ 0.063146] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.063156] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.063595] clocksource: Switched to clocksource arch_sys_counter [ 0.083135] NET: Registered protocol family 2 [ 0.083324] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.083358] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.083420] TCP: Hash tables configured (established 8192 bind 8192) [ 0.083454] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.083470] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.083526] NET: Registered protocol family 1 [ 0.083713] RPC: Registered named UNIX socket transport module. [ 0.083717] RPC: Registered udp transport module. [ 0.083720] RPC: Registered tcp transport module. [ 0.083723] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.083729] PCI: CLS 0 bytes, default 64 [ 0.084287] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.084964] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.087731] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.087993] NFS: Registering the id_resolver key type [ 0.088008] Key type id_resolver registered [ 0.088011] Key type id_legacy registered [ 0.088029] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.088283] random: fast init done [ 0.088638] bounce: pool size: 64 pages [ 0.088656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.088661] io scheduler noop registered [ 0.088664] io scheduler deadline registered [ 0.088722] io scheduler cfq registered (default) [ 0.088726] io scheduler mq-deadline registered [ 0.088729] io scheduler kyber registered [ 0.089974] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.100636] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.101519] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.119843] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.120901] console [ttyS0] disabled [ 0.120919] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.033489] console [ttyS0] enabled [ 1.037264] SuperH (H)SCI(F) driver initialized [ 1.042150] msm_serial: driver initialized [ 1.046306] STMicroelectronics ASC driver initialized [ 1.053379] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.059920] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.067346] panel-simple panel: panel supply power not found, using dummy regulator [ 1.078049] brd: module loaded [ 1.083524] loop: module loaded [ 1.087630] as3722 4-0040: AS3722 with revision 0x1 found [ 1.097667] as3722-sd2: supplied by +5V_SYS [ 1.102075] as3722-sd3: supplied by +5V_SYS [ 1.106410] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.112576] as3722-sd4: supplied by +5V_SYS [ 1.116959] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.122704] as3722-sd5: supplied by +5V_SYS [ 1.128290] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.134016] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.140022] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.145638] as3722-ldo3: supplied by +3.3V_SYS [ 1.150084] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.157658] as3722-ldo4: supplied by +3.3V_SYS [ 1.162252] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.168267] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.173029] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.179714] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.185736] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.190506] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.197050] as3722-ldo9: supplied by +5V_SYS [ 1.201610] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.207804] as3722-ldo10: supplied by +5V_SYS [ 1.212305] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.218751] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.237376] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.243427] libphy: Fixed MDIO Bus: probed [ 1.247922] CAN device driver interface [ 1.252067] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.258185] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.264007] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.269928] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.276877] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.283753] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.291150] usbcore: registered new interface driver pegasus [ 1.296817] usbcore: registered new interface driver asix [ 1.302212] usbcore: registered new interface driver ax88179_178a [ 1.308307] usbcore: registered new interface driver cdc_ether [ 1.314146] usbcore: registered new interface driver smsc75xx [ 1.319891] usbcore: registered new interface driver smsc95xx [ 1.325638] usbcore: registered new interface driver net1080 [ 1.331292] usbcore: registered new interface driver cdc_subset [ 1.337211] usbcore: registered new interface driver zaurus [ 1.342789] usbcore: registered new interface driver cdc_ncm [ 1.349109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.355628] ehci-pci: EHCI PCI platform driver [ 1.360072] ehci-platform: EHCI generic platform driver [ 1.365358] ehci-orion: EHCI orion driver [ 1.369410] SPEAr-ehci: EHCI SPEAr driver [ 1.373454] ehci-st: EHCI STMicroelectronics driver [ 1.378370] ehci-exynos: EHCI EXYNOS driver [ 1.382593] ehci-atmel: EHCI Atmel driver [ 1.386642] tegra-ehci: Tegra EHCI driver [ 1.390702] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.396876] ohci-pci: OHCI PCI platform driver [ 1.401318] ohci-platform: OHCI generic platform driver [ 1.406598] SPEAr-ohci: OHCI SPEAr driver [ 1.410642] ohci-st: OHCI STMicroelectronics driver [ 1.415559] ohci-atmel: OHCI Atmel driver [ 1.419811] usbcore: registered new interface driver usb-storage [ 1.426957] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.435623] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.442483] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.449447] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.456587] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.462934] i2c /dev entries driver [ 1.468859] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.480302] sdhci: Secure Digital Host Controller Interface driver [ 1.486484] sdhci: Copyright(c) Pierre Ossman [ 1.491368] Synopsys Designware Multimedia Card Interface Driver [ 1.497810] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.503749] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.517548] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.522418] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.541715] mmc0: Unknown controller version (3). You may experience problems. [ 1.548957] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.604539] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.613609] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.621866] ledtrig-cpu: registered to indicate activity on CPUs [ 1.621974] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.636049] usbcore: registered new interface driver usbhid [ 1.641605] usbhid: USB HID core driver [ 1.646862] NET: Registered protocol family 10 [ 1.652642] Segment Routing with IPv6 [ 1.656324] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.662448] NET: Registered protocol family 17 [ 1.666888] can: controller area network core (rev 20170425 abi 9) [ 1.673072] NET: Registered protocol family 29 [ 1.677508] can: raw protocol (rev 20170425) [ 1.681765] can: broadcast manager protocol (rev 20170425 t) [ 1.687414] can: netlink gateway (rev 20170425) max_hops=1 [ 1.693013] Key type dns_resolver registered [ 1.697511] ThumbEE CPU extension supported. [ 1.701770] Registering SWP/SWPB emulation handler [ 1.713426] +3.3V_RUN: supplied by +3.3V_SYS [ 1.718622] +VDD_LED: supplied by +VDD_MUX [ 1.722822] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.728470] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.733164] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.737835] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.743147] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.747968] +5V_USB_HS: supplied by +5V_SYS [ 1.752368] +5V_USB_SS: supplied by +5V_SYS [ 1.757567] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.763027] +3.3V_LP0: supplied by +3.3V_SYS [ 1.768304] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.768405] elan_i2c 1-0015: failed to read report data: -121 [ 1.780091] +5V_HDMI_CON: supplied by +5V_SYS [ 1.785253] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.791982] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.805259] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.811784] panel-simple panel: panel supply power not found, using dummy regulator [ 1.820516] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.833802] mmc1: Unknown controller version (3). You may experience problems. [ 1.841102] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.847552] mmc1: Switching to 3.3V signalling voltage failed [ 1.858996] mmc0: new high speed MMC card at address 0001 [ 1.864808] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.869481] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.875743] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.881791] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.892346] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.903647] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.906260] elan_i2c 1-0015: invalid report id data (ff) [ 1.917091] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.921961] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.933756] mmc2: Unknown controller version (3). You may experience problems. [ 1.941052] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.977524] mmc1: new high speed SDIO card at address 0001 [ 2.003713] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.017081] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.024948] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.033946] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.038471] +1.05V_RUN: disabling [ 2.041932] +1.8V_RUN_CAM: disabling [ 2.045779] +3.3V_RUN_CAM: disabling [ 2.049515] +1.2V_RUN_CAM_FRONT: disabling [ 2.054772] +1.05V_RUN_CAM_REAR: disabling [ 2.061001] +2.8V_RUN_TOUCH: disabling [ 2.064996] +2.8V_RUN_CAM_AF: disabling [ 2.068992] +1.8V_RUN_VPP_FUSE: disabling [ 2.073161] +VDD_LED: disabling [ 2.076334] +5V_VDD_TS_SW: disabling [ 2.079910] +5V_USB_HS: disabling [ 2.083216] +5V_USB_SS: disabling [ 2.086556] +3.3V_PANEL: disabling [ 2.089957] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.094519] +5V_HDMI_CON: disabling [ 2.098962] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.107767] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.205471] mmc2: new high speed SDHC card at address 0007 [ 2.211124] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.224676] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.230848] GPT:3014591 != 15564799 [ 2.234354] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.241743] GPT:3014591 != 15564799 [ 2.245245] GPT: Use GNU Parted to correct GPT errors. [ 2.250400] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.414809] EXT4-fs (mmcblk0p3): recovery complete [ 2.419598] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.427720] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.434692] devtmpfs: mounted [ 2.438353] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#