U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################### 2.8 MiB/s done Bytes transferred = 8024824 (7a72f8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.7 MiB/s done Bytes transferred = 68183 (10a57 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7a72f8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a56 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-rc1-next-20170718-186190-gac3a2da (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jul 17 21:19:30 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c157eec0, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @eef81000 s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994448K/2097148K available (10240K kernel code, 1563K rwdata, 4464K rodata, 2048K init, 402K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1586ca8 (1564 kB) [ 0.000000] .bss : 0xc158fcbc - 0xc15f473c ( 403 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000017] Switching to timer-based delay loop, resolution 1000ns [ 0.001753] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001760] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001767] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001772] Switching to timer-based delay loop, resolution 83ns [ 0.001987] Console: colour dummy device 80x30 [ 0.002000] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002007] pid_max: default: 32768 minimum: 301 [ 0.002043] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002049] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002236] CPU: Testing write buffer coherency: ok [ 0.002354] /cpus/cpu@0 missing clock-frequency property [ 0.002369] /cpus/cpu@1 missing clock-frequency property [ 0.002384] /cpus/cpu@2 missing clock-frequency property [ 0.002399] /cpus/cpu@3 missing clock-frequency property [ 0.002404] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002520] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003227] Hierarchical SRCU implementation. [ 0.003909] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004182] EFI services will not be available. [ 0.004240] smp: Bringing up secondary CPUs ... [ 0.004468] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011962] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021973] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031748] smp: Brought up 1 node, 4 CPUs [ 0.031756] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031760] CPU: All CPU(s) started in SVC mode. [ 0.032308] devtmpfs: initialized [ 0.038076] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038265] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038272] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038849] pinctrl core: initialized pinctrl subsystem [ 0.039512] DMI not present or invalid. [ 0.039595] random: get_random_u32 called from bucket_table_alloc+0xe8/0x254 with crng_init=0 [ 0.039630] NET: Registered protocol family 16 [ 0.040375] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041351] cpuidle: using governor menu [ 0.050378] No ATAGs? [ 0.050432] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.050438] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.053275] Serial: AMBA PL011 UART driver [ 0.053638] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.059221] AT91: Could not find identification node [ 0.059431] +5V_SYS: supplied by +VDD_MUX [ 0.059532] +3.3V_SYS: supplied by +VDD_MUX [ 0.059754] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.059760] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.059796] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.059801] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.059836] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.059840] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.059873] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.059878] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.059970] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.059975] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.060009] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.060013] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.061034] vgaarb: loaded [ 0.061317] SCSI subsystem initialized [ 0.061384] libata version 3.00 loaded. [ 0.061473] usbcore: registered new interface driver usbfs [ 0.061496] usbcore: registered new interface driver hub [ 0.061521] usbcore: registered new device driver usb [ 0.062862] pps_core: LinuxPPS API ver. 1 registered [ 0.062866] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.062874] PTP clock support registered [ 0.062939] EDAC MC: Ver: 3.0.0 [ 0.063066] dmi: Firmware registration failed. [ 0.063372] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.063382] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.063822] clocksource: Switched to clocksource arch_sys_counter [ 0.083173] NET: Registered protocol family 2 [ 0.083370] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.083404] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.083467] TCP: Hash tables configured (established 8192 bind 8192) [ 0.083501] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.083516] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.083571] NET: Registered protocol family 1 [ 0.083733] RPC: Registered named UNIX socket transport module. [ 0.083737] RPC: Registered udp transport module. [ 0.083740] RPC: Registered tcp transport module. [ 0.083743] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.083749] PCI: CLS 0 bytes, default 64 [ 0.084325] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.085003] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.087907] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.088177] NFS: Registering the id_resolver key type [ 0.088189] Key type id_resolver registered [ 0.088192] Key type id_legacy registered [ 0.088210] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.088464] random: fast init done [ 0.088809] bounce: pool size: 64 pages [ 0.088829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.088833] io scheduler noop registered [ 0.088836] io scheduler deadline registered [ 0.088893] io scheduler cfq registered (default) [ 0.088897] io scheduler mq-deadline registered [ 0.088900] io scheduler kyber registered [ 0.090134] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.100784] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.101675] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.120671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.121736] console [ttyS0] disabled [ 0.121753] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.034310] console [ttyS0] enabled [ 1.038080] SuperH (H)SCI(F) driver initialized [ 1.042962] msm_serial: driver initialized [ 1.047118] STMicroelectronics ASC driver initialized [ 1.054207] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.060741] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.068218] panel-simple panel: panel supply power not found, using dummy regulator [ 1.078946] brd: module loaded [ 1.084467] loop: module loaded [ 1.088546] as3722 4-0040: AS3722 with revision 0x1 found [ 1.098595] as3722-sd2: supplied by +5V_SYS [ 1.103006] as3722-sd3: supplied by +5V_SYS [ 1.107348] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.113513] as3722-sd4: supplied by +5V_SYS [ 1.117887] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.123626] as3722-sd5: supplied by +5V_SYS [ 1.129213] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.134950] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.140955] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.146576] as3722-ldo3: supplied by +3.3V_SYS [ 1.151022] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.158591] as3722-ldo4: supplied by +3.3V_SYS [ 1.163183] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.169195] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.173965] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.180635] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.186659] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.191423] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.197968] as3722-ldo9: supplied by +5V_SYS [ 1.202528] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.208726] as3722-ldo10: supplied by +5V_SYS [ 1.213228] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.219664] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.238337] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.244414] libphy: Fixed MDIO Bus: probed [ 1.248903] CAN device driver interface [ 1.253048] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.259169] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.264991] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.270913] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.277861] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.284734] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.292135] usbcore: registered new interface driver pegasus [ 1.297801] usbcore: registered new interface driver asix [ 1.303196] usbcore: registered new interface driver ax88179_178a [ 1.309290] usbcore: registered new interface driver cdc_ether [ 1.315131] usbcore: registered new interface driver smsc75xx [ 1.320876] usbcore: registered new interface driver smsc95xx [ 1.326627] usbcore: registered new interface driver net1080 [ 1.332281] usbcore: registered new interface driver cdc_subset [ 1.338201] usbcore: registered new interface driver zaurus [ 1.343776] usbcore: registered new interface driver cdc_ncm [ 1.350102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.356620] ehci-pci: EHCI PCI platform driver [ 1.361066] ehci-platform: EHCI generic platform driver [ 1.366355] ehci-orion: EHCI orion driver [ 1.370407] SPEAr-ehci: EHCI SPEAr driver [ 1.374455] ehci-st: EHCI STMicroelectronics driver [ 1.379366] ehci-exynos: EHCI EXYNOS driver [ 1.383591] ehci-atmel: EHCI Atmel driver [ 1.387639] tegra-ehci: Tegra EHCI driver [ 1.391700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.397871] ohci-pci: OHCI PCI platform driver [ 1.402315] ohci-platform: OHCI generic platform driver [ 1.407595] SPEAr-ohci: OHCI SPEAr driver [ 1.411640] ohci-st: OHCI STMicroelectronics driver [ 1.416557] ohci-atmel: OHCI Atmel driver [ 1.420813] usbcore: registered new interface driver usb-storage [ 1.427963] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.436627] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.443486] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.450447] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.457588] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.463943] i2c /dev entries driver [ 1.469866] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.481312] sdhci: Secure Digital Host Controller Interface driver [ 1.487494] sdhci: Copyright(c) Pierre Ossman [ 1.492379] Synopsys Designware Multimedia Card Interface Driver [ 1.498827] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.504768] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.517960] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.522830] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.541941] mmc0: Unknown controller version (3). You may experience problems. [ 1.549183] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.604769] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.613835] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.622090] ledtrig-cpu: registered to indicate activity on CPUs [ 1.622208] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.636273] usbcore: registered new interface driver usbhid [ 1.641829] usbhid: USB HID core driver [ 1.647101] NET: Registered protocol family 10 [ 1.652890] Segment Routing with IPv6 [ 1.656571] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.662696] NET: Registered protocol family 17 [ 1.667136] can: controller area network core (rev 20170425 abi 9) [ 1.673318] NET: Registered protocol family 29 [ 1.677754] can: raw protocol (rev 20170425) [ 1.682011] can: broadcast manager protocol (rev 20170425 t) [ 1.687660] can: netlink gateway (rev 20170425) max_hops=1 [ 1.693257] Key type dns_resolver registered [ 1.697754] ThumbEE CPU extension supported. [ 1.702013] Registering SWP/SWPB emulation handler [ 1.713686] +3.3V_RUN: supplied by +3.3V_SYS [ 1.718894] +VDD_LED: supplied by +VDD_MUX [ 1.723090] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.728739] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.733431] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.738168] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.743484] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.748304] +5V_USB_HS: supplied by +5V_SYS [ 1.752703] +5V_USB_SS: supplied by +5V_SYS [ 1.758144] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.763604] +3.3V_LP0: supplied by +3.3V_SYS [ 1.768908] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.768980] elan_i2c 1-0015: failed to read report data: -121 [ 1.780670] +5V_HDMI_CON: supplied by +5V_SYS [ 1.785807] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.792535] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.805980] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.812509] panel-simple panel: panel supply power not found, using dummy regulator [ 1.821287] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.833971] mmc1: Unknown controller version (3). You may experience problems. [ 1.841223] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.847711] mmc1: Switching to 3.3V signalling voltage failed [ 1.859550] mmc0: new high speed MMC card at address 0001 [ 1.865333] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.869977] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.876315] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.882478] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.892249] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.903889] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.906949] elan_i2c 1-0015: invalid report id data (ff) [ 1.917360] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.922229] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.934000] mmc2: Unknown controller version (3). You may experience problems. [ 1.941299] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.977435] mmc1: new high speed SDIO card at address 0001 [ 2.003935] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.017218] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.025025] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.034012] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.038541] +1.05V_RUN: disabling [ 2.042004] +1.8V_RUN_CAM: disabling [ 2.045848] +3.3V_RUN_CAM: disabling [ 2.049585] +1.2V_RUN_CAM_FRONT: disabling [ 2.054815] +1.05V_RUN_CAM_REAR: disabling [ 2.061042] +2.8V_RUN_TOUCH: disabling [ 2.065036] +2.8V_RUN_CAM_AF: disabling [ 2.069032] +1.8V_RUN_VPP_FUSE: disabling [ 2.073200] +VDD_LED: disabling [ 2.076375] +5V_VDD_TS_SW: disabling [ 2.079950] +5V_USB_HS: disabling [ 2.083256] +5V_USB_SS: disabling [ 2.086596] +3.3V_PANEL: disabling [ 2.089997] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.094555] +5V_HDMI_CON: disabling [ 2.098941] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.107631] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.195706] mmc2: new high speed SDHC card at address 0007 [ 2.201355] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.214904] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.221076] GPT:3014591 != 15564799 [ 2.224584] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.231962] GPT:3014591 != 15564799 [ 2.235443] GPT: Use GNU Parted to correct GPT errors. [ 2.240588] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.372689] EXT4-fs (mmcblk0p3): recovery complete [ 2.377507] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.385603] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.392561] devtmpfs: mounted [ 2.396238] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#