U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################### 3.5 MiB/s done Bytes transferred = 8019696 (7a5ef0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 68183 (10a57 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7a5ef0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a56 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.0-next-20170711-185092-g63fe4f1 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Jul 10 22:21:29 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c157dd40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @eef81000 s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994452K/2097148K available (10240K kernel code, 1558K rwdata, 4452K rodata, 2048K init, 402K bss, 37160K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1585af0 (1559 kB) [ 0.000000] .bss : 0xc158ecbc - 0xc15f37fc ( 403 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000017] Switching to timer-based delay loop, resolution 1000ns [ 0.001740] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001747] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001754] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001758] Switching to timer-based delay loop, resolution 83ns [ 0.001970] Console: colour dummy device 80x30 [ 0.001984] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.001991] pid_max: default: 32768 minimum: 301 [ 0.002026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002032] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002219] CPU: Testing write buffer coherency: ok [ 0.002339] /cpus/cpu@0 missing clock-frequency property [ 0.002354] /cpus/cpu@1 missing clock-frequency property [ 0.002369] /cpus/cpu@2 missing clock-frequency property [ 0.002384] /cpus/cpu@3 missing clock-frequency property [ 0.002389] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002505] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003216] Hierarchical SRCU implementation. [ 0.003901] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004166] EFI services will not be available. [ 0.004225] smp: Bringing up secondary CPUs ... [ 0.004451] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011945] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021957] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031736] smp: Brought up 1 node, 4 CPUs [ 0.031744] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031747] CPU: All CPU(s) started in SVC mode. [ 0.032297] devtmpfs: initialized [ 0.038006] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038196] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038204] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038772] pinctrl core: initialized pinctrl subsystem [ 0.039436] DMI not present or invalid. [ 0.039518] random: get_random_u32 called from bucket_table_alloc+0xe8/0x254 with crng_init=0 [ 0.039552] NET: Registered protocol family 16 [ 0.040305] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041248] cpuidle: using governor menu [ 0.050202] No ATAGs? [ 0.050256] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.050263] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.053083] Serial: AMBA PL011 UART driver [ 0.053448] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.058940] AT91: Could not find identification node [ 0.059150] +5V_SYS: supplied by +VDD_MUX [ 0.059250] +3.3V_SYS: supplied by +VDD_MUX [ 0.059468] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.059474] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.059510] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.059515] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.059549] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.059554] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.059588] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.059592] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.059685] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.059690] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.059724] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.059729] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.060742] vgaarb: loaded [ 0.061022] SCSI subsystem initialized [ 0.061086] libata version 3.00 loaded. [ 0.061172] usbcore: registered new interface driver usbfs [ 0.061194] usbcore: registered new interface driver hub [ 0.061214] usbcore: registered new device driver usb [ 0.062537] pps_core: LinuxPPS API ver. 1 registered [ 0.062541] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.062548] PTP clock support registered [ 0.062613] EDAC MC: Ver: 3.0.0 [ 0.062740] dmi: Firmware registration failed. [ 0.063040] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.063050] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.063490] clocksource: Switched to clocksource arch_sys_counter [ 0.083324] NET: Registered protocol family 2 [ 0.083543] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.083578] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.083640] TCP: Hash tables configured (established 8192 bind 8192) [ 0.083674] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.083689] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.083747] NET: Registered protocol family 1 [ 0.083904] RPC: Registered named UNIX socket transport module. [ 0.083908] RPC: Registered udp transport module. [ 0.083911] RPC: Registered tcp transport module. [ 0.083914] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.083919] PCI: CLS 0 bytes, default 64 [ 0.084479] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.085152] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.087934] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.088201] NFS: Registering the id_resolver key type [ 0.088214] Key type id_resolver registered [ 0.088217] Key type id_legacy registered [ 0.088235] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.088483] random: fast init done [ 0.088827] bounce: pool size: 64 pages [ 0.088845] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.088850] io scheduler noop registered [ 0.088853] io scheduler deadline registered [ 0.088908] io scheduler cfq registered (default) [ 0.088912] io scheduler mq-deadline registered [ 0.088915] io scheduler kyber registered [ 0.090141] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.100748] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.101635] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.120427] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.121488] console [ttyS0] disabled [ 0.121506] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.033727] console [ttyS0] enabled [ 1.037496] SuperH (H)SCI(F) driver initialized [ 1.042375] msm_serial: driver initialized [ 1.046530] STMicroelectronics ASC driver initialized [ 1.053617] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.060149] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.067627] panel-simple panel: panel supply power not found, using dummy regulator [ 1.078331] brd: module loaded [ 1.083831] loop: module loaded [ 1.087895] as3722 4-0040: AS3722 with revision 0x1 found [ 1.097940] as3722-sd2: supplied by +5V_SYS [ 1.102344] as3722-sd3: supplied by +5V_SYS [ 1.106690] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.112855] as3722-sd4: supplied by +5V_SYS [ 1.117223] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.122961] as3722-sd5: supplied by +5V_SYS [ 1.128545] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.134276] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.140279] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.145900] as3722-ldo3: supplied by +3.3V_SYS [ 1.150345] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.157913] as3722-ldo4: supplied by +3.3V_SYS [ 1.162502] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.168509] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.173276] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.179956] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.185977] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.190739] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.197277] as3722-ldo9: supplied by +5V_SYS [ 1.201841] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.208038] as3722-ldo10: supplied by +5V_SYS [ 1.212542] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.218977] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.237592] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.243655] libphy: Fixed MDIO Bus: probed [ 1.248136] CAN device driver interface [ 1.252274] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.258389] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.264211] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.270131] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.277081] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.283948] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.291346] usbcore: registered new interface driver pegasus [ 1.297011] usbcore: registered new interface driver asix [ 1.302405] usbcore: registered new interface driver ax88179_178a [ 1.308497] usbcore: registered new interface driver cdc_ether [ 1.314337] usbcore: registered new interface driver smsc75xx [ 1.320082] usbcore: registered new interface driver smsc95xx [ 1.325828] usbcore: registered new interface driver net1080 [ 1.331481] usbcore: registered new interface driver cdc_subset [ 1.337400] usbcore: registered new interface driver zaurus [ 1.342974] usbcore: registered new interface driver cdc_ncm [ 1.349295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.355812] ehci-pci: EHCI PCI platform driver [ 1.360259] ehci-platform: EHCI generic platform driver [ 1.365546] ehci-orion: EHCI orion driver [ 1.369597] SPEAr-ehci: EHCI SPEAr driver [ 1.373646] ehci-st: EHCI STMicroelectronics driver [ 1.378556] ehci-exynos: EHCI EXYNOS driver [ 1.382780] ehci-atmel: EHCI Atmel driver [ 1.386829] tegra-ehci: Tegra EHCI driver [ 1.390888] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.397067] ohci-pci: OHCI PCI platform driver [ 1.401512] ohci-platform: OHCI generic platform driver [ 1.406795] SPEAr-ohci: OHCI SPEAr driver [ 1.410838] ohci-st: OHCI STMicroelectronics driver [ 1.415754] ohci-atmel: OHCI Atmel driver [ 1.420005] usbcore: registered new interface driver usb-storage [ 1.427147] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.435811] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.442669] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.449622] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.456760] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.463106] i2c /dev entries driver [ 1.469024] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.480459] sdhci: Secure Digital Host Controller Interface driver [ 1.486643] sdhci: Copyright(c) Pierre Ossman [ 1.491524] Synopsys Designware Multimedia Card Interface Driver [ 1.497966] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.503905] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.517629] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.522500] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.541610] mmc0: Unknown controller version (3). You may experience problems. [ 1.548853] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.604427] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.613504] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.621747] ledtrig-cpu: registered to indicate activity on CPUs [ 1.621861] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.635929] usbcore: registered new interface driver usbhid [ 1.641486] usbhid: USB HID core driver [ 1.646750] NET: Registered protocol family 10 [ 1.652535] Segment Routing with IPv6 [ 1.656217] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.662337] NET: Registered protocol family 17 [ 1.666775] can: controller area network core (rev 20170425 abi 9) [ 1.672960] NET: Registered protocol family 29 [ 1.677394] can: raw protocol (rev 20170425) [ 1.681651] can: broadcast manager protocol (rev 20170425 t) [ 1.687301] can: netlink gateway (rev 20170425) max_hops=1 [ 1.692899] Key type dns_resolver registered [ 1.697396] ThumbEE CPU extension supported. [ 1.701656] Registering SWP/SWPB emulation handler [ 1.713335] +3.3V_RUN: supplied by +3.3V_SYS [ 1.718530] +VDD_LED: supplied by +VDD_MUX [ 1.722726] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.728376] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.733068] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.737740] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.743052] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.747868] +5V_USB_HS: supplied by +5V_SYS [ 1.752265] +5V_USB_SS: supplied by +5V_SYS [ 1.757503] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.762954] +3.3V_LP0: supplied by +3.3V_SYS [ 1.768234] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.768341] elan_i2c 1-0015: failed to read report data: -121 [ 1.780030] +5V_HDMI_CON: supplied by +5V_SYS [ 1.785192] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.791920] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.805196] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.811726] panel-simple panel: panel supply power not found, using dummy regulator [ 1.820450] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.833697] mmc1: Unknown controller version (3). You may experience problems. [ 1.840994] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.847505] mmc1: Switching to 3.3V signalling voltage failed [ 1.858959] mmc0: new high speed MMC card at address 0001 [ 1.864743] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.869387] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.875728] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.881895] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.891677] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.903551] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.906250] elan_i2c 1-0015: invalid report id data (ff) [ 1.916999] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.921871] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.933662] mmc2: Unknown controller version (3). You may experience problems. [ 1.940960] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.977161] mmc1: new high speed SDIO card at address 0001 [ 2.003605] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.016862] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.024683] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824) [ 2.033660] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.038189] +1.05V_RUN: disabling [ 2.041656] +1.8V_RUN_CAM: disabling [ 2.045507] +3.3V_RUN_CAM: disabling [ 2.049242] +1.2V_RUN_CAM_FRONT: disabling [ 2.054471] +1.05V_RUN_CAM_REAR: disabling [ 2.060694] +2.8V_RUN_TOUCH: disabling [ 2.064688] +2.8V_RUN_CAM_AF: disabling [ 2.068684] +1.8V_RUN_VPP_FUSE: disabling [ 2.072851] +VDD_LED: disabling [ 2.076027] +5V_VDD_TS_SW: disabling [ 2.079601] +5V_USB_HS: disabling [ 2.082907] +5V_USB_SS: disabling [ 2.086249] +3.3V_PANEL: disabling [ 2.089648] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.094206] +5V_HDMI_CON: disabling [ 2.098587] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.107282] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.195457] mmc2: new high speed SDHC card at address 0007 [ 2.201105] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.214676] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.220848] GPT:3014591 != 15564799 [ 2.224357] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.231735] GPT:3014591 != 15564799 [ 2.235216] GPT: Use GNU Parted to correct GPT errors. [ 2.240362] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.466416] EXT4-fs (mmcblk0p3): recovery complete [ 2.471204] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.479328] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.486367] devtmpfs: mounted [ 2.490018] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# echo "Found devices in /dev" Found devices in /dev root@(none):/#