U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################### 3.5 MiB/s done Bytes transferred = 7990432 (79eca0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 68183 (10a57 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x79eca0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a56 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.0-rc7-next-20170627-182753-g89a39f3 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Jun 27 13:42:17 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c157e740, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @eef81000 s39168 r8192 d22272 u69632 [ 0.000000] pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994448K/2097148K available (10240K kernel code, 1561K rwdata, 4440K rodata, 2048K init, 402K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc15864f0 (1562 kB) [ 0.000000] .bss : 0xc158fce0 - 0xc15f453c ( 403 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000011] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001723] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.001730] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001737] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001742] Switching to timer-based delay loop, resolution 83ns [ 0.001956] Console: colour dummy device 80x30 [ 0.001971] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.001978] pid_max: default: 32768 minimum: 301 [ 0.002015] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002212] CPU: Testing write buffer coherency: ok [ 0.002331] /cpus/cpu@0 missing clock-frequency property [ 0.002346] /cpus/cpu@1 missing clock-frequency property [ 0.002361] /cpus/cpu@2 missing clock-frequency property [ 0.002376] /cpus/cpu@3 missing clock-frequency property [ 0.002381] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002498] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.003196] Hierarchical SRCU implementation. [ 0.003877] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004144] EFI services will not be available. [ 0.004203] smp: Bringing up secondary CPUs ... [ 0.004485] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011957] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021972] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031696] smp: Brought up 1 node, 4 CPUs [ 0.031704] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031707] CPU: All CPU(s) started in SVC mode. [ 0.032252] devtmpfs: initialized [ 0.038208] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038403] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038410] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038979] pinctrl core: initialized pinctrl subsystem [ 0.039648] DMI not present or invalid. [ 0.039729] random: get_random_u32 called from bucket_table_alloc+0xe8/0x254 with crng_init=0 [ 0.039764] NET: Registered protocol family 16 [ 0.040519] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041427] cpuidle: using governor menu [ 0.050726] No ATAGs? [ 0.050782] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.050788] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.053630] Serial: AMBA PL011 UART driver [ 0.053997] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.059756] AT91: Could not find identification node [ 0.059970] +5V_SYS: supplied by +VDD_MUX [ 0.060073] +3.3V_SYS: supplied by +VDD_MUX [ 0.060293] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.060299] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.060335] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.060340] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.060374] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.060379] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.060413] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.060417] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.060508] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.060513] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.060547] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.060551] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.061571] vgaarb: loaded [ 0.061871] SCSI subsystem initialized [ 0.061937] libata version 3.00 loaded. [ 0.062031] usbcore: registered new interface driver usbfs [ 0.062054] usbcore: registered new interface driver hub [ 0.062076] usbcore: registered new device driver usb [ 0.063409] pps_core: LinuxPPS API ver. 1 registered [ 0.063413] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.063421] PTP clock support registered [ 0.063488] EDAC MC: Ver: 3.0.0 [ 0.063604] dmi: Firmware registration failed. [ 0.063911] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.063920] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.064364] clocksource: Switched to clocksource arch_sys_counter [ 0.083834] NET: Registered protocol family 2 [ 0.084035] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.084069] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.084132] TCP: Hash tables configured (established 8192 bind 8192) [ 0.084166] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.084181] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.084240] NET: Registered protocol family 1 [ 0.084405] RPC: Registered named UNIX socket transport module. [ 0.084409] RPC: Registered udp transport module. [ 0.084412] RPC: Registered tcp transport module. [ 0.084415] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.084421] PCI: CLS 0 bytes, default 64 [ 0.084972] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.085660] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.088626] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.088897] NFS: Registering the id_resolver key type [ 0.088911] Key type id_resolver registered [ 0.088915] Key type id_legacy registered [ 0.088932] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.089568] bounce: pool size: 64 pages [ 0.089587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.089592] io scheduler noop registered [ 0.089595] io scheduler deadline registered [ 0.089607] io scheduler cfq registered (default) [ 0.089611] io scheduler mq-deadline registered [ 0.089614] io scheduler kyber registered [ 0.090868] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.101538] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.102427] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.121995] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.123073] console [ttyS0] disabled [ 0.123091] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.032263] console [ttyS0] enabled [ 1.036038] SuperH (H)SCI(F) driver initialized [ 1.040921] msm_serial: driver initialized [ 1.045077] STMicroelectronics ASC driver initialized [ 1.052151] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.058696] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.066168] panel-simple panel: panel supply power not found, using dummy regulator [ 1.076962] brd: module loaded [ 1.082489] loop: module loaded [ 1.086580] as3722 4-0040: AS3722 with revision 0x1 found [ 1.096640] as3722-sd2: supplied by +5V_SYS [ 1.101045] as3722-sd3: supplied by +5V_SYS [ 1.105383] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.111549] as3722-sd4: supplied by +5V_SYS [ 1.115894] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.121637] as3722-sd5: supplied by +5V_SYS [ 1.127209] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.132919] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.138976] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.144595] as3722-ldo3: supplied by +3.3V_SYS [ 1.149039] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.156618] as3722-ldo4: supplied by +3.3V_SYS [ 1.161205] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.167222] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.171985] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.178669] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.184689] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.189457] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.196001] as3722-ldo9: supplied by +5V_SYS [ 1.200560] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.206756] as3722-ldo10: supplied by +5V_SYS [ 1.211257] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.217700] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.230586] random: fast init done [ 1.236089] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.242160] libphy: Fixed MDIO Bus: probed [ 1.246669] CAN device driver interface [ 1.250820] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.256938] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.262754] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.268682] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.275631] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.282496] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.289901] usbcore: registered new interface driver pegasus [ 1.295566] usbcore: registered new interface driver asix [ 1.300964] usbcore: registered new interface driver ax88179_178a [ 1.307057] usbcore: registered new interface driver cdc_ether [ 1.312890] usbcore: registered new interface driver smsc75xx [ 1.318642] usbcore: registered new interface driver smsc95xx [ 1.324389] usbcore: registered new interface driver net1080 [ 1.330043] usbcore: registered new interface driver cdc_subset [ 1.335963] usbcore: registered new interface driver zaurus [ 1.341541] usbcore: registered new interface driver cdc_ncm [ 1.347862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.354382] ehci-pci: EHCI PCI platform driver [ 1.358827] ehci-platform: EHCI generic platform driver [ 1.364106] ehci-orion: EHCI orion driver [ 1.368164] SPEAr-ehci: EHCI SPEAr driver [ 1.372209] ehci-st: EHCI STMicroelectronics driver [ 1.377126] ehci-exynos: EHCI EXYNOS driver [ 1.381351] ehci-atmel: EHCI Atmel driver [ 1.385400] tegra-ehci: Tegra EHCI driver [ 1.389461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.395635] ohci-pci: OHCI PCI platform driver [ 1.400078] ohci-platform: OHCI generic platform driver [ 1.405358] SPEAr-ohci: OHCI SPEAr driver [ 1.409405] ohci-st: OHCI STMicroelectronics driver [ 1.414317] ohci-atmel: OHCI Atmel driver [ 1.418579] usbcore: registered new interface driver usb-storage [ 1.425755] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.427100] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.427103] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.429358] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.429376] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.429636] i2c /dev entries driver [ 1.432897] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.438315] sdhci: Secure Digital Host Controller Interface driver [ 1.438317] sdhci: Copyright(c) Pierre Ossman [ 1.439018] Synopsys Designware Multimedia Card Interface Driver [ 1.439613] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.439975] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.448181] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.448191] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.462532] mmc0: Unknown controller version (3). You may experience problems. [ 1.462573] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.524377] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.532431] ledtrig-cpu: registered to indicate activity on CPUs [ 1.538611] usbcore: registered new interface driver usbhid [ 1.544168] usbhid: USB HID core driver [ 1.549437] NET: Registered protocol family 10 [ 1.554199] Segment Routing with IPv6 [ 1.557897] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.564027] NET: Registered protocol family 17 [ 1.568466] can: controller area network core (rev 20170425 abi 9) [ 1.574655] NET: Registered protocol family 29 [ 1.579087] can: raw protocol (rev 20170425) [ 1.583344] can: broadcast manager protocol (rev 20170425 t) [ 1.588993] can: netlink gateway (rev 20170425) max_hops=1 [ 1.594600] Key type dns_resolver registered [ 1.599080] ThumbEE CPU extension supported. [ 1.603340] Registering SWP/SWPB emulation handler [ 1.613996] +3.3V_RUN: supplied by +3.3V_SYS [ 1.619065] +VDD_LED: supplied by +VDD_MUX [ 1.623318] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.628949] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.633583] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.638328] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.643645] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.648456] +5V_USB_HS: supplied by +5V_SYS [ 1.652975] +5V_USB_SS: supplied by +5V_SYS [ 1.658337] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.663737] +3.3V_LP0: supplied by +3.3V_SYS [ 1.665483] mmc0: new high speed MMC card at address 0001 [ 1.665919] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.666243] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.666343] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.666594] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.673699] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.701856] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.705842] elan_i2c 1-0015: reading cmd (0x0101) fail. [ 1.705846] elan_i2c 1-0015: failed to get product ID: -121 [ 1.718665] +5V_HDMI_CON: supplied by +5V_SYS [ 1.723647] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.730450] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.740752] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.747516] panel-simple panel: panel supply power not found, using dummy regulator [ 1.754862] elan_i2c 1-0015: writing cmd (0x0005) failed: -121 [ 1.754865] elan_i2c 1-0015: device reset failed: -121 [ 1.754869] elan_i2c 1-0015: device initialize failed: -121 [ 1.772764] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.786757] mmc1: Unknown controller version (3). You may experience problems. [ 1.793996] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.800407] mmc1: Switching to 3.3V signalling voltage failed [ 1.864450] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.872567] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.877448] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.888542] mmc2: Unknown controller version (3). You may experience problems. [ 1.895874] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.932719] mmc1: new high speed SDIO card at address 0001 [ 1.964487] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 1.977720] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.985188] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 1.987242] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.987712] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1 [ 2.012082] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.016647] +1.05V_RUN: disabling [ 2.020123] +1.8V_RUN_CAM: disabling [ 2.023859] +3.3V_RUN_CAM: disabling [ 2.027696] +1.2V_RUN_CAM_FRONT: disabling [ 2.031953] +1.05V_RUN_CAM_REAR: disabling [ 2.037228] +2.8V_RUN_TOUCH: disabling [ 2.043108] +2.8V_RUN_CAM_AF: disabling [ 2.047203] +1.8V_RUN_VPP_FUSE: disabling [ 2.051370] +VDD_LED: disabling [ 2.054547] +5V_VDD_TS_SW: disabling [ 2.058122] +5V_USB_HS: disabling [ 2.061428] +5V_USB_SS: disabling [ 2.064759] +3.3V_PANEL: disabling [ 2.068161] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.072681] +5V_HDMI_CON: disabling [ 2.077192] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.086030] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.176240] mmc2: new high speed SDHC card at address 0007 [ 2.182048] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.196896] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.203068] GPT:3014591 != 15564799 [ 2.206576] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.213954] GPT:3014591 != 15564799 [ 2.217435] GPT: Use GNU Parted to correct GPT errors. [ 2.222582] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.547975] EXT4-fs (mmcblk0p3): recovery complete [ 2.553663] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.561800] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.569087] devtmpfs: mounted [ 2.572751] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#