Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.608451091 -0700
+++ /tmp/foob	2017-06-27 01:04:28.612451107 -0700
@@ -1 +1,212 @@
-script "/home/jonathanh/workdir/tegra/epmt/test/testscripts/qemu-vexpress64_defc
\ No newline at end of file
+Booting Linux on physical CPU 0x0
+Linux version 4.12.0-rc5-next-20170616-298141-g8234132 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 27 01:02:27 PDT 2017
+Boot CPU: AArch64 Processor [411fd070]
+Machine model: linux,dummy-virt
+Memory limited to 1024MB
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 16 MiB at 0x000000007f000000
+NUMA: No NUMA configuration found
+NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
+NUMA: Adding memblock [0x40000000 - 0x7fffffff] on node 0
+NUMA: Initmem setup node 0 [mem 0x40000000-0x7fffffff]
+NUMA: NODE_DATA [mem 0x7efeae80-0x7efec97f]
+Zone ranges:
+  DMA      [mem 0x0000000040000000-0x000000007fffffff]
+  Normal   empty
+Movable zone start for each node
+Early memory node ranges
+  node   0: [mem 0x0000000040000000-0x000000007fffffff]
+Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
+psci: probing for conduit method from DT.
+psci: PSCIv0.2 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: Trusted OS migration not required
+percpu: Embedded 24 pages/cpu @ffff80003efcf000 s59776 r8192 d30336 u98304
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258048
+Policy zone: DMA
+Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
+PID hash table entries: 4096 (order: 3, 32768 bytes)
+Memory: 999676K/1048576K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 32516K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff000008930000   (  8896 KB)
+    .rodata : 0xffff000008930000 - 0xffff000008d70000   (  4352 KB)
+      .init : 0xffff000008d70000 - 0xffff000008e80000   (  1088 KB)
+      .data : 0xffff000008e80000 - 0xffff000008f90200   (  1089 KB)
+       .bss : 0xffff000008f90200 - 0xffff000008ff3bc0   (   399 KB)
+    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0001000000   (    16 MB actual)
+    memory  : 0xffff800000000000 - 0xffff800040000000   (  1024 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
+Preemptible hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
+	Tasks RCU enabled.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
+NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
+GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
+arch_timer: WARNING: Invalid trigger for IRQ3, assuming level low
+arch_timer: WARNING: Please fix your firmware
+arch_timer: cp15 timer(s) running at 62.50MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
+sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
+Console: colour dummy device 80x25
+Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
+Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
+Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
+ASID allocator initialised with 65536 entries
+Hierarchical SRCU implementation.
+random: crng_initialize+0x4c/0x118 get_random_bytes called with crng_init=0
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+smp: Brought up 1 node, 1 CPU
+SMP: Total of 1 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
+CPU: All CPU(s) started at EL1
+alternatives: patching kernel code
+devtmpfs: initialized
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+futex hash table entries: 256 (order: 3, 32768 bytes)
+pinctrl core: initialized pinctrl subsystem
+DMI not present or invalid.
+random: bucket_table_alloc+0x114/0x29c get_random_u32 called with crng_init=0
+NET: Registered protocol family 16
+cpuidle: using governor menu
+vdso: 2 pages (1 code @ ffff000008937000, 1 data @ ffff000008e85000)
+hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+DMA: preallocated 256 KiB pool for atomic allocations
+Serial: AMBA PL011 UART driver
+9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
+console [ttyAMA0] enabled
+irq: type mismatch, failed to map hwirq-27 for /intc!
+HugeTLB registered 2 MB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+dmi: Firmware registration failed.
+Advanced Linux Sound Architecture Driver Initialized.
+clocksource: Switched to clocksource arch_sys_counter
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
+NET: Registered protocol family 2
+random: neigh_hash_alloc+0x6c/0xd0 get_random_u32 called with crng_init=0
+random: rt_genid_init+0x1c/0x34 get_random_u32 called with crng_init=0
+TCP established hash table entries: 8192 (order: 4, 65536 bytes)
+TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+kvm [1]: HYP mode not available
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(0.726:1): state=initialized audit_enabled=0 res=1
+workingset: timestamp_bits=44 max_order=18 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+random: key_alloc+0x208/0x484 get_random_bytes called with crng_init=0
+Key type id_resolver registered
+Key type id_legacy registered
+nfs4filelayout_init: NFSv4 File Layout Driver Registering...
+9p: Installing v9fs 9p2000 file system support
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
+io scheduler noop registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+pl061_gpio 9030000.pl061: PL061 GPIO chip @0x0000000009030000 registered
+OF: PCI: host bridge /pcie@10000000 ranges:
+OF: PCI:    IO 0x3eff0000..0x3effffff -> 0x00000000
+OF: PCI:   MEM 0x10000000..0x3efeffff -> 0x10000000
+OF: PCI:   MEM 0x8000000000..0xffffffffff -> 0x8000000000
+pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
+pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [bus 00-0f]
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
+pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
+xenfs: not registering filesystem on non-xen platform
+Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+cacheinfo: Unable to detect cache hierarchy for CPU 0
+loop: module loaded
+ vda: vda1 vda2
+hisi_sas: driver version v1.6
+libphy: Fixed MDIO Bus: probed
+tun: Universal TUN/TAP device driver, 1.6
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-msm: Qualcomm On-Chip EHCI Host Controller
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-exynos: OHCI EXYNOS driver
+usbcore: registered new interface driver usb-storage
+rtc-pl031 9010000.pl031: rtc core: registered pl031 as rtc0
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+random: init_oops_id+0x38/0x44 get_random_bytes called with crng_init=0
+registered taskstats version 1
+random: key_alloc+0x208/0x484 get_random_bytes called with crng_init=0
+random: prandom_seed_full_state+0x40/0xe0 get_random_bytes called with crng_init=0
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+rtc-pl031 9010000.pl031: setting system clock to 2017-06-27 08:03:11 UTC (1498550591)
+ALSA device list:
+  No soundcards found.
+uart-pl011 9000000.pl011: no DMA platform data
+EXT4-fs (vda2): couldn't mount as ext3 due to feature incompatibilities
+random: ext4_fill_super+0x15d4/0x2b40 get_random_bytes called with crng_init=0
+EXT4-fs (vda2): recovery complete
+EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 254:2.
+devtmpfs: mounted
+Freeing unused kernel memory: 1088K
+random: arch_mmap_rnd+0x18/0x64 get_random_u64 called with crng_init=0
+random: load_elf_binary+0x2c0/0x106c get_random_u64 called with crng_init=0
+random: arch_align_stack+0x3c/0x54 get_random_u32 called with crng_init=0
+random: load_elf_binary+0x8c8/0x106c get_random_bytes called with crng_init=0
+random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.616451123 -0700
+++ /tmp/foob	2017-06-27 01:04:28.620451140 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -42,7 +42,7 @@
 	 #######################
 	 3.2 MiB/s
 done
-Bytes transferred = 7962016 (797da0 hex)
+Bytes transferred = 7967192 (7991d8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -53,7 +53,7 @@
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x797da0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7991d8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 27 00:58:18 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,12 +72,12 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157eb80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef97000 s39296 r8192 d22144 u69632
+percpu: Embedded 17 pages/cpu @eef98000 s39296 r8192 d22144 u69632
 pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993548K/2096128K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37044K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993552K/2096128K available (10240K kernel code, 1562K rwdata, 4424K rodata, 2048K init, 401K bss, 37040K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586530   (1562 kB)
-       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586858   (1563 kB)
+       .bss : 0xc158fce0 - 0xc15f44d4   ( 402 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -331,7 +331,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 03:05:15 UTC (987735915)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 19:36:23 UTC (987795383)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -345,4 +345,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.459113] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.449076] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.624451156 -0700
+++ /tmp/foob	2017-06-27 01:04:28.628451173 -0700
@@ -38,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 ############################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6125200 (5d7690 hex)
+Bytes transferred = 6127384 (5d7f18 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d7690 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d7f18 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 27 00:58:39 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -70,12 +70,12 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadf80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef96000 s39488 r8192 d21952 u69632
+percpu: Embedded 17 pages/cpu @eef97000 s39488 r8192 d21952 u69632
 pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998564K/2096128K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32028K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998568K/2096128K available (9216K kernel code, 737K rwdata, 2716K rodata, 1024K init, 299K bss, 32024K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
-       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb8648   ( 738 kB)
+       .bss : 0xc0ec261c - 0xc0f0d550   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -286,8 +286,8 @@
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
  mmcblk0: p1 p2 p3
+mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
@@ -323,7 +323,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 03:07:56 UTC (987736076)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 19:38:59 UTC (987795539)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -339,4 +339,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.667227] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.667180] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.632451189 -0700
+++ /tmp/foob	2017-06-27 01:04:28.636451205 -0700
@@ -37,18 +37,18 @@
 	 #######################
 	 4 MiB/s
 done
-Bytes transferred = 7962016 (797da0 hex)
+Bytes transferred = 7967192 (7991d8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67161 (10659 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x797da0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7991d8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013658
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 27 00:58:18 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,12 +67,12 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157eb80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef80000 s39296 r8192 d22144 u69632
+percpu: Embedded 17 pages/cpu @eef82000 s39296 r8192 d22144 u69632
 pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
@@ -80,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993424K/2096128K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37168K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993432K/2096128K available (10240K kernel code, 1562K rwdata, 4424K rodata, 2048K init, 401K bss, 37160K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,8 +90,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586530   (1562 kB)
-       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586858   (1563 kB)
+       .bss : 0xc158fce0 - 0xc15f44d4   ( 402 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -433,7 +433,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:12 UTC (946684812)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.640451221 -0700
+++ /tmp/foob	2017-06-27 01:04:28.644451238 -0700
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -35,7 +35,7 @@
 	 ############################
 	 4 MiB/s
 done
-Bytes transferred = 6125200 (5d7690 hex)
+Bytes transferred = 6127384 (5d7f18 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 67161 (10659 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d7690 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d7f18 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013658
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 27 00:58:39 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -65,12 +65,12 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadf80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef7f000 s39488 r8192 d21952 u69632
+percpu: Embedded 17 pages/cpu @eef81000 s39488 r8192 d21952 u69632
 pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
@@ -78,7 +78,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998440K/2096128K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32152K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998448K/2096128K available (9216K kernel code, 737K rwdata, 2716K rodata, 1024K init, 299K bss, 32144K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,8 +88,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
-       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb8648   ( 738 kB)
+       .bss : 0xc0ec261c - 0xc0f0d550   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -415,8 +415,7 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
+ mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -441,9 +440,6 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
-mmcblk1: retrying using single block read
 r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0c01000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
@@ -451,7 +447,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:05 UTC (946684925)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:35 UTC (946684895)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
@@ -466,7 +462,6 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
- mmcblk1: p1 p2 p3
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.648451255 -0700
+++ /tmp/foob	2017-06-27 01:04:28.652451271 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -45,7 +45,7 @@
 	 #######################
 	 3.5 MiB/s
 done
-Bytes transferred = 7962016 (797da0 hex)
+Bytes transferred = 7967192 (7991d8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -56,7 +56,7 @@
 done
 Bytes transferred = 68183 (10a57 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x797da0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7991d8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a56
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 27 00:58:18 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,12 +76,12 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157eb80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327679 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef80000 s39296 r8192 d22144 u69632
+percpu: Embedded 17 pages/cpu @eef81000 s39296 r8192 d22144 u69632
 pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522751
@@ -89,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994444K/2097148K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37168K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994448K/2097148K available (10240K kernel code, 1562K rwdata, 4424K rodata, 2048K init, 401K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,8 +99,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586530   (1562 kB)
-       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586858   (1563 kB)
+       .bss : 0xc158fce0 - 0xc15f44d4   ( 402 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -303,21 +303,13 @@
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 ledtrig-cpu: registered to indicate activity on CPUs
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 NET: Registered protocol family 10
 Segment Routing with IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 can: controller area network core (rev 20170425 abi 9)
 NET: Registered protocol family 29
 can: raw protocol (rev 20170425)
@@ -327,6 +319,8 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 +3.3V_RUN: supplied by +3.3V_SYS
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
@@ -341,23 +335,27 @@
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
-elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:27:46 UTC (946686466)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
@@ -377,17 +375,17 @@
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
-EXT4-fs (mmcblk0p3): recovery complete
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
-EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 179:3.
-devtmpfs: mounted
 GPT:3014591 != 15564799
 GPT:Primary header thinks Alt. header is not at the end of the disk.
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+EXT4-fs (mmcblk0p3): recovery complete
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.656451288 -0700
+++ /tmp/foob	2017-06-27 01:04:28.660451304 -0700
@@ -38,23 +38,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################################################
+	 #########################################################EHCI timed out on TD - token=0x8008d80
+T T ########
 	 #################################################################
 	 ############################
-	 3.2 MiB/s
+	 408.2 KiB/s
 done
-Bytes transferred = 6125200 (5d7690 hex)
+Bytes transferred = 6127384 (5d7f18 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 1.9 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68183 (10a57 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d7690 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d7f18 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a56
@@ -63,7 +64,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 27 00:58:39 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,12 +75,12 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadf80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327679 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef7f000 s39488 r8192 d21952 u69632
+percpu: Embedded 17 pages/cpu @eef80000 s39488 r8192 d21952 u69632
 pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522751
@@ -87,7 +88,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999460K/2097148K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32152K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999464K/2097148K available (9216K kernel code, 737K rwdata, 2716K rodata, 1024K init, 299K bss, 32148K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -97,8 +98,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
-       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb8648   ( 738 kB)
+       .bss : 0xc0ec261c - 0xc0f0d550   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -301,8 +302,8 @@
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
-NET: Registered protocol family 10
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+NET: Registered protocol family 10
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
@@ -362,7 +363,7 @@
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:27:08 UTC (946686428)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:35 UTC (946684835)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -377,8 +378,8 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
@@ -388,6 +389,8 @@
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
@@ -395,6 +398,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.670070] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# [    3.007391] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.668451336 -0700
+++ /tmp/foob	2017-06-27 01:04:28.668451336 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800765 us
+Bootloader-Cpu Init at (time stamp): 1801044 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800739  us
-Bootloader (AosInit) time: 734221 us
-Bootloader Main Init time: 188269 us
-BlockDevMgrInit time: 157642 us
-PartMgrInit time: 8 us
-StorMgrInit time: 31 us
+Miscellaneous avp time: 1801018  us
+Bootloader (AosInit) time: 734238 us
+Bootloader Main Init time: 180088 us
+BlockDevMgrInit time: 157536 us
+PartMgrInit time: 9 us
+StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 76963 us 
-Display init time: 574703 us
-Kernel read time: 396 msec
+Partition Table load: 76682 us 
+Display init time: 574790 us
+Kernel read time: 395 msec
 Load Kernel Size:   17115136 Bytes
-Bl Kernel ReadSpeed: 43220000 Bytes/sec
-Pre-Kernel Jump time: 1802035 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5939093 us
+Bl Kernel ReadSpeed: 43329000 Bytes/sec
+Pre-Kernel Jump time: 1802566 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5974507 us
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-297624-ged34efc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 08:31:20 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-298141-g8234132 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 27 01:02:27 PDT 2017
 Boot CPU: AArch64 Processor [4e0f0000]
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
@@ -88,7 +88,7 @@
 NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ec5fffff]
 NUMA: Adding memblock [0x80000000 - 0xec5fffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0xec5fffff]
-NUMA: NODE_DATA [mem 0xec5bf080-0xec5c0b7f]
+NUMA: NODE_DATA [mem 0xec5bfd80-0xec5c187f]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ec5fffff]
   Normal   empty
@@ -204,7 +204,7 @@
 Freeing initrd memory: 1284K
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.929:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.939:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -269,23 +269,27 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-mmc0: new high speed MMC card at address 0001
 NET: Registered protocol family 17
 9pnet: Installing 9P2000 support
 Key type dns_resolver registered
+mmc0: new high speed MMC card at address 0001
 random: init_oops_id+0x38/0x44 get_random_bytes called with crng_init=0
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 registered taskstats version 1
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 random: key_alloc+0x208/0x484 get_random_bytes called with crng_init=0
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
 random: prandom_seed_full_state+0x40/0xe0 get_random_bytes called with crng_init=0
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +VDD_LED: supplied by +VDD_MUX
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
 hctosys: unable to open rtc device (rtc0)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
@@ -296,14 +300,10 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: arch_align_stack+0x3c/0x54 get_random_u32 called with crng_init=0
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 random: load_elf_binary+0x8f4/0x1030 get_random_bytes called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
@@ -315,40 +315,38 @@
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
-Mounting /proc :[    8.095818] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /proc :[    8.199300] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /sys :[    8.128448] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /sys :[    8.231976] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /dev :[    8.160216] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /dev :[    8.263832] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /dev/pts :[    8.194345] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /dev/pts :[    8.298018] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /sys/kernel/debug :[    8.256825] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /sys/kernel/debug :[    8.360533] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting other filesystems :[    8.288494] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting other filesystems :[    8.394779] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
 Enabling hot-plug :[SUCCESS]
-Populating /dev :[    8.323483] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Populating /dev :[    8.430130] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
@@ -364,17 +362,17 @@
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
-Starting syslogd :[    8.888085] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Starting syslogd :[    8.986620] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Starting telnetd :[    8.922426] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Starting telnetd :[    9.021574] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
 
 System initialization complete.
 
-Please press Enter to activate this console. [    8.960072] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Please press Enter to activate this console. [    9.058803] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.676451369 -0700
+++ /tmp/foob	2017-06-27 01:04:28.680451386 -0700
@@ -48,20 +48,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################
-	 4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 7962016 (797da0 hex)
+Bytes transferred = 7967192 (7991d8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4.1 MiB/s
 done
 Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x797da0 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7991d8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103cd
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 27 00:58:18 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c157e8c0, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c157eb80, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -92,7 +92,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954380K/1048576K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 28660K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 954380K/1048576K available (10240K kernel code, 1562K rwdata, 4424K rodata, 2048K init, 401K bss, 28660K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -102,8 +102,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586530   (1562 kB)
-       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586858   (1563 kB)
+       .bss : 0xc158fce0 - 0xc15f44d4   ( 402 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -270,7 +270,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08fc000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08f9000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -341,11 +341,11 @@
 can: netlink gateway (rev 20170425) max_hops=1
 random: key_alloc+0x220/0x394 get_random_bytes called with crng_init=0
 Key type dns_resolver registered
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 random: init_oops_id+0x34/0x40 get_random_bytes called with crng_init=0
 random: key_alloc+0x220/0x394 get_random_bytes called with crng_init=0
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 random: prandom_seed_full_state+0x24/0xac get_random_bytes called with crng_init=0
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.684451402 -0700
+++ /tmp/foob	2017-06-27 01:04:28.688451418 -0700
@@ -46,9 +46,9 @@
 	 #################################################################
 	 #################################################################
 	 ############################
-	 4 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 6125200 (5d7690 hex)
+Bytes transferred = 6127384 (5d7f18 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5d7690 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5d7f18 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103cd
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 27 00:58:39 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -77,7 +77,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0eadd40, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0eadf80, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -90,7 +90,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959396K/1048576K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 23644K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959396K/1048576K available (9216K kernel code, 737K rwdata, 2716K rodata, 1024K init, 299K bss, 23644K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -100,8 +100,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
-       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb8648   ( 738 kB)
+       .bss : 0xc0ec261c - 0xc0f0d550   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 	Tasks RCU enabled.
@@ -262,7 +262,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08e1000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08e7000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -337,27 +337,27 @@
 random: key_alloc+0x1d4/0x368 get_random_bytes called with crng_init=0
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
-mmc1: new high speed SD card at address b368
 random: init_oops_id+0x34/0x40 get_random_bytes called with crng_init=0
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
 random: key_alloc+0x1d4/0x368 get_random_bytes called with crng_init=0
 random: prandom_seed_full_state+0x24/0xac get_random_bytes called with crng_init=0
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 ALSA device list:
   #0: tegra-trimslice
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
 mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
 mmcblk1: retrying using single block read
  mmcblk1: p1 p2
@@ -369,8 +369,8 @@
 mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
 mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
 random: fast init done
-mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
 asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
 mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
 mmcblk0: retrying using single block read
  mmcblk0: p1
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.692451435 -0700
+++ /tmp/foob	2017-06-27 01:04:28.696451452 -0700
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 772951 us
-Basic modules init took 348609 us
+Tegraboot started after 884733 us
+Basic modules init took 349209 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
 Next stage binary read took 14368 us
-Carveout took 252766 us
-CPU initialization took 92310 us
-Total time taken by TegraBoot 708053 us
+Carveout took 252739 us
+CPU initialization took 92307 us
+Total time taken by TegraBoot 708623 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.611] LPDDR4 Training: Number of tables = 10
+64b[0001.721] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-15794688 bytes read in 814 ms (18.5 MiB/s)
+15794688 bytes read in 815 ms (18.5 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-45170 bytes read in 459 ms (95.7 KiB/s)
+45170 bytes read in 460 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-297624-ged34efc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 08:31:20 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-298141-g8234132 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 27 01:02:27 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
@@ -145,7 +145,7 @@
 NUMA: Adding memblock [0x80000000 - 0xff1fffff] on node 0
 NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0x13fffffff]
-NUMA: NODE_DATA [mem 0x13ffa9980-0x13ffab47f]
+NUMA: NODE_DATA [mem 0x13ffaca80-0x13ffae57f]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
@@ -164,7 +164,7 @@
 psci: PSCIv0.2 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
-percpu: Embedded 24 pages/cpu @ffff8000bff46000 s59776 r8192 d30336 u98304
+percpu: Embedded 24 pages/cpu @ffff8000bff49000 s59776 r8192 d30336 u98304
 pcpu-alloc: s59776 r8192 d30336 u98304 alloc=24*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
@@ -175,7 +175,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2983236K/3131392K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 131772K reserved, 16384K cma-reserved)
+Memory: 2983248K/3131392K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 131760K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -273,14 +273,14 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8091f000
+kvm [1]: IDMAP page: 80920000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.551:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.559:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -371,6 +371,6 @@
 random: load_elf_binary+0x8f4/0x1030 get_random_bytes called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no j[    1.454690] random: fast init done
-ob control in this shell
+bash: no job contr[    1.429266] random: fast init done
+ol in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.700451468 -0700
+++ /tmp/foob	2017-06-27 01:04:28.704451483 -0700
@@ -1,4 +1,4 @@
- Getting EFI parameters from FDT:
+
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x00000000f5400000
 earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
@@ -8,7 +8,7 @@
 NUMA: Adding memblock [0x80000000 - 0xf65fffff] on node 0
 NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0x13fffffff]
-NUMA: NODE_DATA [mem 0x13ff9d900-0x13ff9f3ff]
+NUMA: NODE_DATA [mem 0x13ffa0c80-0x13ffa277f]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
@@ -21,7 +21,7 @@
 psci: PSCIv1.0 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
-percpu: Embedded 24 pages/cpu @ffff8000bff3a000 s59776 r8192 d30336 u98304
+percpu: Embedded 24 pages/cpu @ffff8000bff3d000 s59776 r8192 d30336 u98304
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -30,7 +30,7 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2838504K/2988032K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 133144K reserved, 16384K cma-reserved)
+Memory: 2838516K/2988032K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 133132K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -76,7 +76,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-297624-ged34efc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 08:31:20 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-298141-g8234132 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 27 01:02:27 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
@@ -89,7 +89,7 @@
 NUMA: Adding memblock [0x80000000 - 0xf65fffff] on node 0
 NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0x13fffffff]
-NUMA: NODE_DATA [mem 0x13ff9d900-0x13ff9f3ff]
+NUMA: NODE_DATA [mem 0x13ffa0c80-0x13ffa277f]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
@@ -102,7 +102,7 @@
 psci: PSCIv1.0 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
-percpu: Embedded 24 pages/cpu @ffff8000bff3a000 s59776 r8192 d30336 u98304
+percpu: Embedded 24 pages/cpu @ffff8000bff3d000 s59776 r8192 d30336 u98304
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -111,7 +111,7 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2838504K/2988032K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 133144K reserved, 16384K cma-reserved)
+Memory: 2838516K/2988032K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 133132K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -232,7 +232,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 1280K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8091f000
+kvm [1]: IDMAP page: 80920000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -278,12 +278,12 @@
 PP2800L_RCAM: Bringing 3100000uV into 2800000-2800000uV
 max77620-ldo4: supplied by regulator-dummy
 PP1100_SOC_RTC: Bringing 1000000uV into 850000-850000uV
+random: fast init done
 max77620-ldo5: supplied by regulator-dummy
 PP2800L_FCAM: Bringing 3100000uV into 2800000-2800000uV
 max77620-ldo6: supplied by regulator-dummy
 PP_LDO6: Bringing 2800000uV into 1800000-1800000uV
 max77620-ldo7: supplied by regulator-dummy
-random: fast init done
 max77620-ldo8: supplied by regulator-dummy
 hisi_sas: driver version v1.6
 libphy: Fixed MDIO Bus: probed
@@ -344,11 +344,10 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2001-04-06 20:56:51 UTC (986590611)
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+max77686-rtc max77620-rtc: setting system clock to 2001-04-07 13:27:56 UTC (986650076)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -359,6 +358,7 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 Freeing unused kernel memory: 1088K
 
 System initialization...
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.708451500 -0700
+++ /tmp/foob	2017-06-27 01:04:28.712451516 -0700
@@ -42,18 +42,18 @@
 	 #######################
 	 3.2 MiB/s
 done
-Bytes transferred = 7962016 (797da0 hex)
+Bytes transferred = 7967192 (7991d8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51848 (ca88 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x797da0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7991d8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa87 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 27 00:58:18 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,12 +71,12 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157eb80, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef86000 s39296 r8192 d22144 u69632
+percpu: Embedded 17 pages/cpu @eef88000 s39296 r8192 d22144 u69632
 pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993464K/2096128K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37128K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993472K/2096128K available (10240K kernel code, 1562K rwdata, 4424K rodata, 2048K init, 401K bss, 37120K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586530   (1562 kB)
-       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586858   (1563 kB)
+       .bss : 0xc158fce0 - 0xc15f44d4   ( 402 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -399,5 +399,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.083678] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.083701] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-27 01:04:28.716451533 -0700
+++ /tmp/foob	2017-06-27 01:04:28.720451550 -0700
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 ############################
-	 3.3 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6125200 (5d7690 hex)
+Bytes transferred = 6127384 (5d7f18 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51848 (ca88 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d7690 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d7f18 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa87 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
+Linux version 4.12.0-rc5-next-20170616-179900-g8234132 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 27 00:58:39 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,12 +69,12 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadf80, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 17 pages/cpu @eef85000 s39488 r8192 d21952 u69632
+percpu: Embedded 17 pages/cpu @eef87000 s39488 r8192 d21952 u69632
 pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998480K/2096128K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32112K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998488K/2096128K available (9216K kernel code, 737K rwdata, 2716K rodata, 1024K init, 299K bss, 32104K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,8 +92,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
-       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb8648   ( 738 kB)
+       .bss : 0xc0ec261c - 0xc0f0d550   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -394,4 +394,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.400195] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.410163] usb 2-1: new high-speed USB device number 2 using tegra-ehci
