Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.838244711 -0700
+++ /tmp/foob	2017-06-26 08:33:09.842244729 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -40,20 +40,20 @@
 	 #################################################################
 	 #################################################################
 	 #######################
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 7962856 (7980e8 hex)
+Bytes transferred = 7962016 (797da0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7980e8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x797da0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 06:56:51 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993548K/2096128K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37044K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993548K/2096128K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37044K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586230   (1561 kB)
-       .bss : 0xc158fcd4 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586530   (1562 kB)
+       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -321,17 +321,17 @@
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 mmc1: new high speed MMC card at address 0001
-tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 01:34:53 UTC (987730493)
- mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 03:05:15 UTC (987735915)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -345,4 +345,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.409180] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.459113] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.878244882 -0700
+++ /tmp/foob	2017-06-26 08:33:09.882244898 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -40,18 +40,18 @@
 	 ############################
 	 3.2 MiB/s
 done
-Bytes transferred = 6124304 (5d7310 hex)
+Bytes transferred = 6125200 (5d7690 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d7310 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d7690 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 06:57:03 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -70,7 +70,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead640, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998568K/2096128K available (9216K kernel code, 735K rwdata, 2720K rodata, 1024K init, 299K bss, 32024K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998564K/2096128K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32028K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7ca0   ( 736 kB)
-       .bss : 0xc0ec1610 - 0xc0f0c590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
+       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -323,7 +323,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 01:37:34 UTC (987730654)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-20 03:07:56 UTC (987736076)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -339,4 +339,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.666346] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.667227] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.890244933 -0700
+++ /tmp/foob	2017-06-26 08:33:09.894244950 -0700
@@ -37,26 +37,26 @@
 	 #######################
 	 4 MiB/s
 done
-Bytes transferred = 7962856 (7980e8 hex)
+Bytes transferred = 7962016 (797da0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 4 MiB/s
+	 3.8 MiB/s
 done
-Bytes transferred = 67133 (1063d hex)
+Bytes transferred = 67161 (10659 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7980e8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x797da0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
-   Using Device Tree in place at 83000000, end 8301363c
+   Using Device Tree in place at 83000000, end 83013658
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 06:56:51 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -80,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993424K/2096128K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37168K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993424K/2096128K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37168K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,8 +90,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586230   (1561 kB)
-       .bss : 0xc158fcd4 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586530   (1562 kB)
+       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -202,8 +202,8 @@
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
 tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
@@ -323,8 +323,8 @@
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 mmc0: new high speed MMC card at address 0001
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
@@ -364,12 +364,12 @@
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
-tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
-tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
-tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
+tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
@@ -448,8 +448,6 @@
 ata1: SATA link down (SStatus 0 SControl 300)
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
  mmcblk1: p1 p2 p3
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.902244984 -0700
+++ /tmp/foob	2017-06-26 08:33:09.906245001 -0700
@@ -33,9 +33,9 @@
 	 #################################################################
 	 #################################################################
 	 ############################
-	 3.9 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6124304 (5d7310 hex)
+Bytes transferred = 6125200 (5d7690 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -44,18 +44,18 @@
 Loading: *#####
 	 3.8 MiB/s
 done
-Bytes transferred = 67133 (1063d hex)
+Bytes transferred = 67161 (10659 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d7310 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d7690 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
-   Using Device Tree in place at 83000000, end 8301363c
+   Using Device Tree in place at 83000000, end 83013658
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 06:57:03 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -65,7 +65,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead640, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -78,7 +78,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998444K/2096128K available (9216K kernel code, 735K rwdata, 2720K rodata, 1024K init, 299K bss, 32148K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998440K/2096128K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32152K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,8 +88,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7ca0   ( 736 kB)
-       .bss : 0xc0ec1610 - 0xc0f0c590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
+       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -195,8 +195,8 @@
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
 tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
@@ -321,8 +321,8 @@
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
@@ -374,13 +374,13 @@
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 ata1: SATA link down (SStatus 0 SControl 300)
-tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
-tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
-tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
@@ -414,9 +414,9 @@
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
 mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
-pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -433,8 +433,6 @@
 pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
-mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
-mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 393
@@ -443,6 +441,9 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk1: retrying using single block read
 r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0c01000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
@@ -450,7 +451,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:03 UTC (946684923)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:05 UTC (946684925)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
@@ -465,7 +466,6 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
-mmcblk1: retrying using single block read
  mmcblk1: p1 p2 p3
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.926245086 -0700
+++ /tmp/foob	2017-06-26 08:33:09.926245086 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -43,28 +43,28 @@
 	 #################################################################
 	 #################################################################
 	 #######################
-	 3.1 MiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 7962856 (7980e8 hex)
+Bytes transferred = 7962016 (797da0 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 68155 (10a3b hex)
+Bytes transferred = 68183 (10a57 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7980e8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x797da0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
-   Using Device Tree in place at 83000000, end 83013a3a
+   Using Device Tree in place at 83000000, end 83013a56
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 06:56:51 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c157e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -89,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994444K/2097148K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37168K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994444K/2097148K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37168K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,8 +99,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586230   (1561 kB)
-       .bss : 0xc158fcd4 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586530   (1562 kB)
+       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -357,7 +357,7 @@
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:27:46 UTC (946686466)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
@@ -377,17 +377,17 @@
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
+EXT4-fs (mmcblk0p3): recovery complete
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
 GPT:3014591 != 15564799
 GPT:Primary header thinks Alt. header is not at the end of the disk.
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-EXT4-fs (mmcblk0p3): recovery complete
-EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 179:3.
-devtmpfs: mounted
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.950245188 -0700
+++ /tmp/foob	2017-06-26 08:33:09.954245205 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -41,29 +41,29 @@
 	 #################################################################
 	 #################################################################
 	 ############################
-	 3.6 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6124304 (5d7310 hex)
+Bytes transferred = 6125200 (5d7690 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 1.9 MiB/s
 done
-Bytes transferred = 68155 (10a3b hex)
+Bytes transferred = 68183 (10a57 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d7310 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d7690 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
-   Using Device Tree in place at 83000000, end 83013a3a
+   Using Device Tree in place at 83000000, end 83013a56
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 06:57:03 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,7 +74,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0ead640, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -87,7 +87,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999464K/2097148K available (9216K kernel code, 735K rwdata, 2720K rodata, 1024K init, 299K bss, 32148K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999460K/2097148K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32152K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -97,8 +97,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7ca0   ( 736 kB)
-       .bss : 0xc0ec1610 - 0xc0f0c590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
+       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -301,8 +301,8 @@
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 10
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
@@ -362,7 +362,7 @@
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:27:08 UTC (946686428)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -377,8 +377,8 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   #1: GoogleNyanBig
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
@@ -388,8 +388,6 @@
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
@@ -397,4 +395,6 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.016949] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# [    2.670070] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.966245256 -0700
+++ /tmp/foob	2017-06-26 08:33:09.970245273 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801521 us
+Bootloader-Cpu Init at (time stamp): 1800765 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801495  us
-Bootloader (AosInit) time: 733496 us
-Bootloader Main Init time: 180196 us
-BlockDevMgrInit time: 157561 us
+Miscellaneous avp time: 1800739  us
+Bootloader (AosInit) time: 734221 us
+Bootloader Main Init time: 188269 us
+BlockDevMgrInit time: 157642 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 76999 us 
-Display init time: 574538 us
-Kernel read time: 394 msec
+Partition Table load: 76963 us 
+Display init time: 574703 us
+Kernel read time: 396 msec
 Load Kernel Size:   17115136 Bytes
-Bl Kernel ReadSpeed: 43439000 Bytes/sec
-Pre-Kernel Jump time: 1802688 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5926590 us
+Bl Kernel ReadSpeed: 43220000 Bytes/sec
+Pre-Kernel Jump time: 1802035 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5939093 us
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-297312-gb147461 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 07:01:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-297624-ged34efc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 08:31:20 PDT 2017
 Boot CPU: AArch64 Processor [4e0f0000]
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
@@ -88,7 +88,7 @@
 NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ec5fffff]
 NUMA: Adding memblock [0x80000000 - 0xec5fffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0xec5fffff]
-NUMA: NODE_DATA [mem 0xec5bf100-0xec5c0bff]
+NUMA: NODE_DATA [mem 0xec5bf080-0xec5c0b7f]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ec5fffff]
   Normal   empty
@@ -204,7 +204,7 @@
 Freeing initrd memory: 1284K
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.933:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.929:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -272,17 +272,14 @@
 mmc0: new high speed MMC card at address 0001
 NET: Registered protocol family 17
 9pnet: Installing 9P2000 support
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 Key type dns_resolver registered
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 random: init_oops_id+0x38/0x44 get_random_bytes called with crng_init=0
 registered taskstats version 1
 random: key_alloc+0x208/0x484 get_random_bytes called with crng_init=0
 random: prandom_seed_full_state+0x40/0xe0 get_random_bytes called with crng_init=0
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +VDD_LED: supplied by +VDD_MUX
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
@@ -299,11 +296,14 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: arch_align_stack+0x3c/0x54 get_random_u32 called with crng_init=0
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 random: load_elf_binary+0x8f4/0x1030 get_random_bytes called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
@@ -315,38 +315,40 @@
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
-Mounting /proc :[    8.187928] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /proc :[    8.095818] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /sys :[    8.220450] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /sys :[    8.128448] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /dev :[    8.252220] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /dev :[    8.160216] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /dev/pts :[    8.284113] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /dev/pts :[    8.194345] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /sys/kernel/debug :[    8.346117] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /sys/kernel/debug :[    8.256825] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting other filesystems :[    8.377732] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting other filesystems :[    8.288494] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
 Enabling hot-plug :[SUCCESS]
-Populating /dev :[    8.412586] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Populating /dev :[    8.323483] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
@@ -362,17 +364,17 @@
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
-Starting syslogd :[    8.965744] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Starting syslogd :[    8.888085] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Starting telnetd :[    9.000272] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Starting telnetd :[    8.922426] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
 
 System initialization complete.
 
-Please press Enter to activate this console. [    9.037274] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Please press Enter to activate this console. [    8.960072] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:09.998245393 -0700
+++ /tmp/foob	2017-06-26 08:33:09.998245393 -0700
@@ -48,9 +48,9 @@
 	 #################################################################
 	 #################################################################
 	 #######################
-	 4.1 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 7962856 (7980e8 hex)
+Bytes transferred = 7962016 (797da0 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,17 +59,17 @@
 Loading: *##
 	 3.4 MiB/s
 done
-Bytes transferred = 21426 (53b2 hex)
+Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7980e8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x797da0 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 024103b1
+   Using Device Tree in place at 02408000, end 024103cd
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 06:56:51 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c157e5c0, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c157e8c0, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -92,7 +92,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954380K/1048576K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 28660K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 954380K/1048576K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 28660K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -102,8 +102,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586230   (1561 kB)
-       .bss : 0xc158fcd4 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586530   (1562 kB)
+       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -197,9 +197,9 @@
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
 io scheduler kyber registered
-tegra-pcie 80003000.pcie-controller: dual-mode configuration
-tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
+tegra-pcie 80003000.pcie: dual-mode configuration
+tegra-pcie 80003000.pcie: probing port 0, using 2 lanes
+tegra-pcie 80003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff]
 pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref]
@@ -341,11 +341,11 @@
 can: netlink gateway (rev 20170425) max_hops=1
 random: key_alloc+0x220/0x394 get_random_bytes called with crng_init=0
 Key type dns_resolver registered
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 random: init_oops_id+0x34/0x40 get_random_bytes called with crng_init=0
 random: key_alloc+0x220/0x394 get_random_bytes called with crng_init=0
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 random: prandom_seed_full_state+0x24/0xac get_random_bytes called with crng_init=0
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:10.014245460 -0700
+++ /tmp/foob	2017-06-26 08:33:10.018245477 -0700
@@ -46,29 +46,29 @@
 	 #################################################################
 	 #################################################################
 	 ############################
-	 3.6 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6124304 (5d7310 hex)
+Bytes transferred = 6125200 (5d7690 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 2.9 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 21426 (53b2 hex)
+Bytes transferred = 21454 (53ce hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5d7310 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5d7690 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 024103b1
+   Using Device Tree in place at 02408000, end 024103cd
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 06:57:03 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -77,7 +77,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0ead640, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0eadd40, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -90,7 +90,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959400K/1048576K available (9216K kernel code, 735K rwdata, 2720K rodata, 1024K init, 299K bss, 23640K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959396K/1048576K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 23644K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -100,8 +100,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7ca0   ( 736 kB)
-       .bss : 0xc0ec1610 - 0xc0f0c590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
+       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 	Tasks RCU enabled.
@@ -192,9 +192,9 @@
 io scheduler noop registered (default)
 io scheduler mq-deadline registered
 io scheduler kyber registered
-tegra-pcie 80003000.pcie-controller: dual-mode configuration
-tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
+tegra-pcie 80003000.pcie: dual-mode configuration
+tegra-pcie 80003000.pcie: probing port 0, using 2 lanes
+tegra-pcie 80003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff]
 pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref]
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:10.034245546 -0700
+++ /tmp/foob	2017-06-26 08:33:10.038245562 -0700
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 766414 us
-Basic modules init took 348349 us
+Tegraboot started after 772951 us
+Basic modules init took 348609 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14366 us
-Carveout took 252742 us
-CPU initialization took 92316 us
-Total time taken by TegraBoot 707773 us
+Next stage binary read took 14368 us
+Carveout took 252766 us
+CPU initialization took 92310 us
+Total time taken by TegraBoot 708053 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.604] LPDDR4 Training: Number of tables = 10
+64b[0001.611] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -119,19 +119,19 @@
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
 15794688 bytes read in 814 ms (18.5 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-45142 bytes read in 460 ms (95.7 KiB/s)
+45170 bytes read in 459 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 0000000082000000, end 000000008200e055
+   Using Device Tree in place at 0000000082000000, end 000000008200e071
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-297312-gb147461 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 07:01:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-297624-ged34efc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 08:31:20 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
@@ -145,7 +145,7 @@
 NUMA: Adding memblock [0x80000000 - 0xff1fffff] on node 0
 NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0x13fffffff]
-NUMA: NODE_DATA [mem 0x13ffa9a00-0x13ffab4ff]
+NUMA: NODE_DATA [mem 0x13ffa9980-0x13ffab47f]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
@@ -280,7 +280,7 @@
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.563:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.551:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -351,13 +351,14 @@
 random: prandom_seed_full_state+0x40/0xe0 get_random_bytes called with crng_init=0
 hctosys: unable to open rtc device (rtc0)
 ALSA device list:
+  No soundcards found.
+Waiting for root device PARTUUID=00000000-0001-0000-788f-a75600000000...
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
-  No soundcards found.
 EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
 random: ext4_fill_super+0x15d4/0x2b40 get_random_bytes called with crng_init=0
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
@@ -370,6 +371,6 @@
 random: load_elf_binary+0x8f4/0x1030 get_random_bytes called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job contr[    1.419193] random: fast init done
-ol in this shell
+bash: no j[    1.454690] random: fast init done
+ob control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:10.050245613 -0700
+++ /tmp/foob	2017-06-26 08:33:10.054245631 -0700
@@ -1,7 +1,4 @@
- Jun 26 07:01:06 PDT 2017
-Boot CPU: AArch64 Processor [411fd071]
-Machine model: Google Pixel C
-efi: Getting EFI parameters from FDT:
+ Getting EFI parameters from FDT:
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x00000000f5400000
 earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
@@ -11,7 +8,7 @@
 NUMA: Adding memblock [0x80000000 - 0xf65fffff] on node 0
 NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0x13fffffff]
-NUMA: NODE_DATA [mem 0x13ff9d980-0x13ff9f47f]
+NUMA: NODE_DATA [mem 0x13ff9d900-0x13ff9f3ff]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
@@ -79,7 +76,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-297312-gb147461 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 07:01:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-297624-ged34efc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Jun 26 08:31:20 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
@@ -92,7 +89,7 @@
 NUMA: Adding memblock [0x80000000 - 0xf65fffff] on node 0
 NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
 NUMA: Initmem setup node 0 [mem 0x80000000-0x13fffffff]
-NUMA: NODE_DATA [mem 0x13ff9d980-0x13ff9f47f]
+NUMA: NODE_DATA [mem 0x13ff9d900-0x13ff9f3ff]
 Zone ranges:
   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
@@ -242,7 +239,7 @@
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.287:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -283,10 +280,10 @@
 PP1100_SOC_RTC: Bringing 1000000uV into 850000-850000uV
 max77620-ldo5: supplied by regulator-dummy
 PP2800L_FCAM: Bringing 3100000uV into 2800000-2800000uV
-random: fast init done
 max77620-ldo6: supplied by regulator-dummy
 PP_LDO6: Bringing 2800000uV into 1800000-1800000uV
 max77620-ldo7: supplied by regulator-dummy
+random: fast init done
 max77620-ldo8: supplied by regulator-dummy
 hisi_sas: driver version v1.6
 libphy: Fixed MDIO Bus: probed
@@ -347,10 +344,11 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
+max77686-rtc max77620-rtc: setting system clock to 2001-04-06 20:56:51 UTC (986590611)
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-04-06 19:26:46 UTC (986585206)
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -362,7 +360,6 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:10.066245682 -0700
+++ /tmp/foob	2017-06-26 08:33:10.070245699 -0700
@@ -40,9 +40,9 @@
 	 #################################################################
 	 #################################################################
 	 #######################
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 7962856 (7980e8 hex)
+Bytes transferred = 7962016 (797da0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,17 +51,17 @@
 Loading: *####
 	 2.7 MiB/s
 done
-Bytes transferred = 51804 (ca5c hex)
+Bytes transferred = 51848 (ca88 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7980e8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x797da0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
+   Loading Device Tree to 8fff0000, end 8ffffa87 ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 06:56:51 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 26 08:27:13 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e5c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e8c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993464K/2096128K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37128K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993464K/2096128K available (10240K kernel code, 1561K rwdata, 4424K rodata, 2048K init, 402K bss, 37128K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586230   (1561 kB)
-       .bss : 0xc158fcd4 - 0xc15f4514   ( 403 kB)
+      .data : 0xc1400000 - 0xc1586530   (1562 kB)
+       .bss : 0xc158fce0 - 0xc15f4514   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -228,8 +228,8 @@
 tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
-tegra-pcie 3000.pcie-controller: 2x3 configuration
-tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
+tegra-pcie 3000.pcie: 2x3 configuration
+tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -316,23 +316,23 @@
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 mmc1: new high speed MMC card at address 0001
+tegra-pcie 3000.pcie: 2x3 configuration
+tegra-pcie 3000.pcie: probing port 0, using 2 lanes
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
+tegra-pcie 3000.pcie: probing port 2, using 2 lanes
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
-tegra-pcie 3000.pcie-controller: 2x3 configuration
-tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
-tegra-pcie 3000.pcie-controller: link 2 down, retrying
-tegra-pcie 3000.pcie-controller: link 2 down, retrying
-tegra-pcie 3000.pcie-controller: link 2 down, retrying
-tegra-pcie 3000.pcie-controller: link 2 down, ignoring
-tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
+tegra-pcie 3000.pcie: link 2 down, retrying
+tegra-pcie 3000.pcie: link 2 down, retrying
+tegra-pcie 3000.pcie: link 2 down, retrying
+tegra-pcie 3000.pcie: link 2 down, ignoring
+tegra-pcie 3000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
 pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref]
@@ -399,5 +399,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.154116] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.083678] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-26 08:33:10.078245733 -0700
+++ /tmp/foob	2017-06-26 08:33:10.082245750 -0700
@@ -38,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 ############################
-	 3.1 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6124304 (5d7310 hex)
+Bytes transferred = 6125200 (5d7690 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -49,18 +49,18 @@
 Loading: *####
 	 3.1 MiB/s
 done
-Bytes transferred = 51804 (ca5c hex)
+Bytes transferred = 51848 (ca88 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d7310 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d7690 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
+   Loading Device Tree to 8fff0000, end 8ffffa87 ... OK
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc5-next-20170614-179071-gb147461 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 06:57:03 PDT 2017
+Linux version 4.12.0-rc5-next-20170615-179383-ged34efc (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jun 26 08:27:26 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,7 +69,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead640, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eadd40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998484K/2096128K available (9216K kernel code, 735K rwdata, 2720K rodata, 1024K init, 299K bss, 32108K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998480K/2096128K available (9216K kernel code, 736K rwdata, 2720K rodata, 1024K init, 299K bss, 32112K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,8 +92,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7ca0   ( 736 kB)
-       .bss : 0xc0ec1610 - 0xc0f0c590   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb83a0   ( 737 kB)
+       .bss : 0xc0ec261c - 0xc0f0d590   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -221,8 +221,8 @@
 tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
-tegra-pcie 3000.pcie-controller: 2x3 configuration
-tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
+tegra-pcie 3000.pcie: 2x3 configuration
+tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -318,14 +318,14 @@
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-tegra-pcie 3000.pcie-controller: 2x3 configuration
-tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
-tegra-pcie 3000.pcie-controller: link 2 down, retrying
-tegra-pcie 3000.pcie-controller: link 2 down, retrying
-tegra-pcie 3000.pcie-controller: link 2 down, retrying
-tegra-pcie 3000.pcie-controller: link 2 down, ignoring
-tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
+tegra-pcie 3000.pcie: 2x3 configuration
+tegra-pcie 3000.pcie: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie: probing port 2, using 2 lanes
+tegra-pcie 3000.pcie: link 2 down, retrying
+tegra-pcie 3000.pcie: link 2 down, retrying
+tegra-pcie 3000.pcie: link 2 down, retrying
+tegra-pcie 3000.pcie: link 2 down, ignoring
+tegra-pcie 3000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
 pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref]
@@ -394,4 +394,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.410187] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.400195] usb 2-1: new high-speed USB device number 2 using tegra-ehci
