Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.331024367 -0700
+++ /tmp/foob	2017-06-13 02:22:02.331024367 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-295948-gfc11440 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jun 8 23:52:57 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-297092-gbc4c75f (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 13 02:20:10 PDT 2017
 Boot CPU: AArch64 Processor [411fd070]
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
@@ -30,7 +30,7 @@
 Policy zone: DMA
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
-Memory: 999676K/1048576K available (8892K kernel code, 1088K rwdata, 4312K rodata, 1088K init, 398K bss, 32516K reserved, 16384K cma-reserved)
+Memory: 999676K/1048576K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 32516K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -38,7 +38,7 @@
     .rodata : 0xffff000008930000 - 0xffff000008d70000   (  4352 KB)
       .init : 0xffff000008d70000 - 0xffff000008e80000   (  1088 KB)
       .data : 0xffff000008e80000 - 0xffff000008f90200   (  1089 KB)
-       .bss : 0xffff000008f90200 - 0xffff000008ff3b30   (   399 KB)
+       .bss : 0xffff000008f90200 - 0xffff000008ff3bc0   (   399 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -120,7 +120,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.718:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.723:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -191,7 +191,7 @@
 random: key_alloc+0x208/0x484 get_random_bytes called with crng_init=0
 random: prandom_seed_full_state+0x40/0xe0 get_random_bytes called with crng_init=0
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-06-09 06:53:45 UTC (1496991225)
+rtc-pl031 9010000.pl031: setting system clock to 2017-06-13 09:20:58 UTC (1497345658)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.367024522 -0700
+++ /tmp/foob	2017-06-13 02:22:02.371024540 -0700
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################
+	 #######################
 	 3.1 MiB/s
 done
-Bytes transferred = 7947552 (794520 hex)
+Bytes transferred = 7963632 (7983f0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3.3 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x794520 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7983f0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jun 8 23:49:00 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 13 02:15:31 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e100, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e680, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993556K/2096128K available (10240K kernel code, 1559K rwdata, 4416K rodata, 2048K init, 402K bss, 37036K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993552K/2096128K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37040K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1585d70   (1560 kB)
-       .bss : 0xc158ecd4 - 0xc15f36cc   ( 403 kB)
+      .data : 0xc1400000 - 0xc15862f0   (1561 kB)
+       .bss : 0xc158fcd4 - 0xc15f4554   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -331,7 +331,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-02 18:26:16 UTC (986235976)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-06 20:53:00 UTC (986590380)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -345,4 +345,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.449084] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.449131] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.399024660 -0700
+++ /tmp/foob	2017-06-13 02:22:02.399024660 -0700
@@ -37,21 +37,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################
-	 3.1 MiB/s
+	 ############################
+	 3.2 MiB/s
 done
-Bytes transferred = 6116744 (5d5588 hex)
+Bytes transferred = 6122352 (5d6b70 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d5588 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d6b70 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jun 8 23:49:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 13 02:15:43 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -70,7 +70,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead140, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0ead480, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998572K/2096128K available (9216K kernel code, 733K rwdata, 2716K rodata, 1024K init, 299K bss, 32020K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998572K/2096128K available (9216K kernel code, 734K rwdata, 2720K rodata, 1024K init, 299K bss, 32020K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7738   ( 734 kB)
-       .bss : 0xc0ec161c - 0xc0f0c57c   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb7a78   ( 735 kB)
+       .bss : 0xc0ec1610 - 0xc0f0c584   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -287,8 +287,8 @@
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
- mmcblk0: p1 p2 p3
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+ mmcblk0: p1 p2 p3
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
@@ -323,7 +323,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-02 18:28:53 UTC (986236133)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-04-06 20:55:40 UTC (986590540)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -339,4 +339,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.667306] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.667411] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.407024695 -0700
+++ /tmp/foob	2017-06-13 02:22:02.411024712 -0700
@@ -34,10 +34,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################
-	 3.9 MiB/s
+	 #######################
+	 4 MiB/s
 done
-Bytes transferred = 7947552 (794520 hex)
+Bytes transferred = 7963632 (7983f0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -48,7 +48,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x794520 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7983f0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jun 8 23:49:00 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 13 02:15:31 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e100, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e680, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -80,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993436K/2096128K available (10240K kernel code, 1559K rwdata, 4416K rodata, 2048K init, 402K bss, 37156K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993432K/2096128K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37160K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,8 +90,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1585d70   (1560 kB)
-       .bss : 0xc158ecd4 - 0xc15f36cc   ( 403 kB)
+      .data : 0xc1400000 - 0xc15862f0   (1561 kB)
+       .bss : 0xc158fcd4 - 0xc15f4554   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -321,9 +321,14 @@
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+ mmcblk0: p1
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
-mmc0: new high speed MMC card at address 0001
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
@@ -382,6 +387,7 @@
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
@@ -394,6 +400,8 @@
 pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
@@ -402,6 +410,8 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -426,14 +436,14 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b5f000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b72000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:12 UTC (946684812)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
@@ -445,19 +455,14 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
-ata1: SATA link down (SStatus 0 SControl 300)
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk1: retrying using single block read
  mmcblk1: p1 p2 p3
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
+VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.423024759 -0700
+++ /tmp/foob	2017-06-13 02:22:02.423024759 -0700
@@ -32,10 +32,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################
+	 ############################
 	 4 MiB/s
 done
-Bytes transferred = 6116744 (5d5588 hex)
+Bytes transferred = 6122352 (5d6b70 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d5588 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d6b70 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jun 8 23:49:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 13 02:15:43 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -65,7 +65,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead140, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0ead480, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -78,7 +78,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998452K/2096128K available (9216K kernel code, 733K rwdata, 2716K rodata, 1024K init, 299K bss, 32140K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998452K/2096128K available (9216K kernel code, 734K rwdata, 2720K rodata, 1024K init, 299K bss, 32140K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,8 +88,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7738   ( 734 kB)
-       .bss : 0xc0ec161c - 0xc0f0c57c   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb7a78   ( 735 kB)
+       .bss : 0xc0ec1610 - 0xc0f0c584   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -231,8 +231,8 @@
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
 tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
-random: fast init done
 m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+random: dummy_setup+0xa0/0xc4 get_random_bytes called with crng_init=0
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -247,6 +247,7 @@
 usbcore: registered new interface driver net1080
 usbcore: registered new interface driver cdc_subset
 usbcore: registered new interface driver zaurus
+random: usbnet_init+0x14/0x30 get_random_bytes called with crng_init=0
 usbcore: registered new interface driver cdc_ncm
 tegra-phy 7d004000.usb-phy: no vbus regulator
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
@@ -262,6 +263,7 @@
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
+random: fast init done
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
 as3722-rtc as3722-rtc: RTC interrupt 377
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -415,7 +417,8 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- mmcblk1: p1 p2 p3
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -440,6 +443,9 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 7744504, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk1: retrying using single block read
 r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0c01000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
@@ -447,7 +453,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:05 UTC (946684925)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
@@ -462,6 +468,7 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
+ mmcblk1: p1 p2 p3
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.435024814 -0700
+++ /tmp/foob	2017-06-13 02:22:02.439024831 -0700
@@ -42,21 +42,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################
-	 3.6 MiB/s
+	 #######################
+	 3.2 MiB/s
 done
-Bytes transferred = 7947552 (794520 hex)
+Bytes transferred = 7963632 (7983f0 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x794520 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7983f0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jun 8 23:49:00 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 13 02:15:31 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c157e100, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e680, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -89,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994452K/2097148K available (10240K kernel code, 1559K rwdata, 4416K rodata, 2048K init, 402K bss, 37160K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994448K/2097148K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,8 +99,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1585d70   (1560 kB)
-       .bss : 0xc158ecd4 - 0xc15f36cc   ( 403 kB)
+      .data : 0xc1400000 - 0xc15862f0   (1561 kB)
+       .bss : 0xc158fcd4 - 0xc15f4554   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -357,7 +357,7 @@
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:02 UTC (946684862)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.463024934 -0700
+++ /tmp/foob	2017-06-13 02:22:02.467024950 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -40,10 +40,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################
-	 3.5 MiB/s
+	 ############################
+	 3.4 MiB/s
 done
-Bytes transferred = 6116744 (5d5588 hex)
+Bytes transferred = 6122352 (5d6b70 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -54,7 +54,7 @@
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d5588 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d6b70 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jun 8 23:49:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 13 02:15:43 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,7 +74,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0ead140, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0ead480, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -87,7 +87,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999468K/2097148K available (9216K kernel code, 733K rwdata, 2716K rodata, 1024K init, 299K bss, 32144K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999468K/2097148K available (9216K kernel code, 734K rwdata, 2720K rodata, 1024K init, 299K bss, 32144K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -97,8 +97,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7738   ( 734 kB)
-       .bss : 0xc0ec161c - 0xc0f0c57c   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb7a78   ( 735 kB)
+       .bss : 0xc0ec1610 - 0xc0f0c584   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -388,13 +388,13 @@
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
-input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.027445] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# [    3.017498] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.471024966 -0700
+++ /tmp/foob	2017-06-13 02:22:02.475024983 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800916 us
+Bootloader-Cpu Init at (time stamp): 1800812 us
 
 Pinmux changes applied in kernel way
 
@@ -59,25 +59,25 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 3 us
+Board Id Read Time: 4 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800890  us
-Bootloader (AosInit) time: 734244 us
-Bootloader Main Init time: 180090 us
-BlockDevMgrInit time: 157529 us
+Miscellaneous avp time: 1800785  us
+Bootloader (AosInit) time: 734240 us
+Bootloader Main Init time: 180088 us
+BlockDevMgrInit time: 157531 us
 PartMgrInit time: 8 us
-StorMgrInit time: 31 us
+StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 77187 us 
-Display init time: 574350 us
-Kernel read time: 393 msec
+Partition Table load: 76771 us 
+Display init time: 574690 us
+Kernel read time: 394 msec
 Load Kernel Size:   17115136 Bytes
-Bl Kernel ReadSpeed: 43549000 Bytes/sec
-Pre-Kernel Jump time: 1802454 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5926508 us
+Bl Kernel ReadSpeed: 43439000 Bytes/sec
+Pre-Kernel Jump time: 1802780 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5973841 us
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-295948-gfc11440 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jun 8 23:52:57 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-297092-gbc4c75f (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 13 02:20:10 PDT 2017
 Boot CPU: AArch64 Processor [4e0f0000]
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
@@ -103,7 +103,7 @@
 Policy zone: DMA
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
 PID hash table entries: 4096 (order: 3, 32768 bytes)
-Memory: 1708892K/1775616K available (8892K kernel code, 1088K rwdata, 4312K rodata, 1088K init, 398K bss, 50340K reserved, 16384K cma-reserved)
+Memory: 1708892K/1775616K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 50340K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -111,7 +111,7 @@
     .rodata : 0xffff000008930000 - 0xffff000008d70000   (  4352 KB)
       .init : 0xffff000008d70000 - 0xffff000008e80000   (  1088 KB)
       .data : 0xffff000008e80000 - 0xffff000008f90200   (  1089 KB)
-       .bss : 0xffff000008f90200 - 0xffff000008ff3b30   (   399 KB)
+       .bss : 0xffff000008f90200 - 0xffff000008ff3bc0   (   399 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -204,7 +204,7 @@
 Freeing initrd memory: 1284K
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.925:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.923:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -280,8 +280,8 @@
 registered taskstats version 1
 random: key_alloc+0x208/0x484 get_random_bytes called with crng_init=0
 random: prandom_seed_full_state+0x40/0xe0 get_random_bytes called with crng_init=0
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
 +VDD_LED: supplied by +VDD_MUX
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
@@ -290,6 +290,8 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 hctosys: unable to open rtc device (rtc0)
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
 +5V_USB_HS: disabling
@@ -300,8 +302,6 @@
   No soundcards found.
 Freeing unused kernel memory: 1088K
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: arch_align_stack+0x3c/0x54 get_random_u32 called with crng_init=0
 random: load_elf_binary+0x8f4/0x1030 get_random_bytes called with crng_init=0
@@ -318,35 +318,35 @@
 
 System initialization...
 
-Mounting /proc :[    8.185323] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /proc :[    8.186808] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /sys :[    8.217838] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /sys :[    8.219444] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /dev :[    8.249419] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /dev :[    8.251071] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /dev/pts :[    8.281106] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /dev/pts :[    8.282831] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting /sys/kernel/debug :[    8.342631] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting /sys/kernel/debug :[    8.344891] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Mounting other filesystems :[    8.374150] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Mounting other filesystems :[    8.376692] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
 Enabling hot-plug :[SUCCESS]
-Populating /dev :[    8.408963] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Populating /dev :[    8.411626] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
@@ -362,17 +362,17 @@
 random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
-Starting syslogd :[    8.959767] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Starting syslogd :[    8.965888] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
-Starting telnetd :[    8.994083] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Starting telnetd :[    9.000138] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 [SUCCESS]
 
 System initialization complete.
 
-Please press Enter to activate this console. [    9.031415] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
+Please press Enter to activate this console. [    9.037819] random: arch_mmap_rnd+0x40/0x64 get_random_u64 called with crng_init=0
 random: load_elf_binary+0x6d0/0x1030 get_random_u64 called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.495025068 -0700
+++ /tmp/foob	2017-06-13 02:22:02.499025086 -0700
@@ -47,10 +47,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################
-	 4.1 MiB/s
+	 #######################
+	 4 MiB/s
 done
-Bytes transferred = 7947552 (794520 hex)
+Bytes transferred = 7963632 (7983f0 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -61,7 +61,7 @@
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x794520 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7983f0 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jun 8 23:49:00 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 13 02:15:31 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c157e100, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c157e680, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -92,7 +92,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954384K/1048576K available (10240K kernel code, 1559K rwdata, 4416K rodata, 2048K init, 402K bss, 28656K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 954380K/1048576K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 28660K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -102,8 +102,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1585d70   (1560 kB)
-       .bss : 0xc158ecd4 - 0xc15f36cc   ( 403 kB)
+      .data : 0xc1400000 - 0xc15862f0   (1561 kB)
+       .bss : 0xc158fcd4 - 0xc15f4554   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -344,34 +344,44 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 random: init_oops_id+0x34/0x40 get_random_bytes called with crng_init=0
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 random: key_alloc+0x220/0x394 get_random_bytes called with crng_init=0
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 random: prandom_seed_full_state+0x24/0xac get_random_bytes called with crng_init=0
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
-Waiting for root device PARTUUID=11eb23c1-01...
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk1: retrying using single block read
+ mmcblk1: p1 p2
+Waiting for root device PARTUUID=11eb23c1-01...
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
+mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
 random: ipv6_regen_rndid+0x1c/0xc4 get_random_bytes called with crng_init=0
 asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-random: ext4_fill_super+0x1cec/0x34fc get_random_bytes called with crng_init=0
 random: fast init done
+mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk0: retrying using single block read
+ mmcblk0: p1
+mmcblk0: r/w command failed, status = 0x80000900
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.519025171 -0700
+++ /tmp/foob	2017-06-13 02:22:02.523025188 -0700
@@ -45,10 +45,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################
+	 ############################
 	 4 MiB/s
 done
-Bytes transferred = 6116744 (5d5588 hex)
+Bytes transferred = 6122352 (5d6b70 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5d5588 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5d6b70 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jun 8 23:49:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 13 02:15:43 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -77,7 +77,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0x3c000000
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0ead140, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0ead480, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -90,7 +90,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959400K/1048576K available (9216K kernel code, 733K rwdata, 2716K rodata, 1024K init, 299K bss, 23640K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959400K/1048576K available (9216K kernel code, 734K rwdata, 2720K rodata, 1024K init, 299K bss, 23640K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -100,8 +100,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7738   ( 734 kB)
-       .bss : 0xc0ec161c - 0xc0f0c57c   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb7a78   ( 735 kB)
+       .bss : 0xc0ec1610 - 0xc0f0c584   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 	Tasks RCU enabled.
@@ -340,33 +340,42 @@
 mmc1: new high speed SD card at address b368
 random: init_oops_id+0x34/0x40 get_random_bytes called with crng_init=0
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
 random: key_alloc+0x1d4/0x368 get_random_bytes called with crng_init=0
 random: prandom_seed_full_state+0x24/0xac get_random_bytes called with crng_init=0
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmcblk1: error -5 sending stop command, original cmd response 0x900, card status 0x900
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 ALSA device list:
   #0: tegra-trimslice
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+mmcblk1: error -5 transferring data, sector 3839992, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk1: retrying using single block read
+ mmcblk1: p1 p2
 Waiting for root device PARTUUID=11eb23c1-01...
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
-random: ipv6_regen_rndid+0x1c/0xc4 get_random_bytes called with crng_init=0
+mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
+mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
+random: fast init done
+mmcblk0: error -5 sending stop command, original cmd response 0x900, card status 0x900
 asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+mmcblk0: error -5 transferring data, sector 7759864, nr 8, cmd response 0x900, card status 0x80000b00
+mmcblk0: retrying using single block read
+ mmcblk0: p1
+mmcblk0: r/w command failed, status = 0x80000900
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-random: ext4_fill_super+0x1c94/0x346c get_random_bytes called with crng_init=0
-random: fast init done
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.555025328 -0700
+++ /tmp/foob	2017-06-13 02:22:02.555025328 -0700
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 751237 us
-Basic modules init took 350123 us
-Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 14393 us
-Carveout took 253601 us
-CPU initialization took 92294 us
-Total time taken by TegraBoot 710411 us
+Tegraboot started after 837627 us
+Basic modules init took 349497 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14365 us
+Carveout took 252733 us
+CPU initialization took 92298 us
+Total time taken by TegraBoot 708893 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.592] LPDDR4 Training: Number of tables = 10
+64b[0001.675] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -119,9 +119,9 @@
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
 15794688 bytes read in 814 ms (18.5 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-45142 bytes read in 459 ms (95.7 KiB/s)
+45142 bytes read in 461 ms (94.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 493 ms (3.1 MiB/s)
+1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-295948-gfc11440 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jun 8 23:52:57 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-297092-gbc4c75f (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 13 02:20:10 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
@@ -175,7 +175,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2983248K/3131392K available (8892K kernel code, 1088K rwdata, 4312K rodata, 1088K init, 398K bss, 131760K reserved, 16384K cma-reserved)
+Memory: 2983248K/3131392K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 131760K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -183,7 +183,7 @@
     .rodata : 0xffff000008930000 - 0xffff000008d70000   (  4352 KB)
       .init : 0xffff000008d70000 - 0xffff000008e80000   (  1088 KB)
       .data : 0xffff000008e80000 - 0xffff000008f90200   (  1089 KB)
-       .bss : 0xffff000008f90200 - 0xffff000008ff3b30   (   399 KB)
+       .bss : 0xffff000008f90200 - 0xffff000008ff3bc0   (   399 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -273,7 +273,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8091a000
+kvm [1]: IDMAP page: 8091f000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -371,6 +371,6 @@
 random: load_elf_binary+0x8f4/0x1030 get_random_bytes called with crng_init=0
 random: randomize_page+0x40/0x5c get_random_u64 called with crng_init=0
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in th[    1.461015] random: fast init done
-is shell
+bash: no job contr[    1.443043] random: fast init done
+ol in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.563025360 -0700
+++ /tmp/foob	2017-06-13 02:22:02.563025360 -0700
@@ -1,7 +1,4 @@
-5400000
-earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
-bootconsole [uart0] enabled
-NUMA: No NUMA configuration found
+ration found
 NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
 NUMA: Adding memblock [0x80000000 - 0xf65fffff] on node 0
 NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
@@ -28,7 +25,7 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2838516K/2988032K available (8892K kernel code, 1088K rwdata, 4312K rodata, 1088K init, 398K bss, 133132K reserved, 16384K cma-reserved)
+Memory: 2838516K/2988032K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 133132K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -36,7 +33,7 @@
     .rodata : 0xffff000008930000 - 0xffff000008d70000   (  4352 KB)
       .init : 0xffff000008d70000 - 0xffff000008e80000   (  1088 KB)
       .data : 0xffff000008e80000 - 0xffff000008f90200   (  1089 KB)
-       .bss : 0xffff000008f90200 - 0xffff000008ff3b30   (   399 KB)
+       .bss : 0xffff000008f90200 - 0xffff000008ff3bc0   (   399 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -62,7 +59,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x8c9: expected 0x2004f400
+boot misc3 0x8ca: expected 0x2004f400
  (comparison mask = 0xffffffff)
 boot misc1 0x0: expected 0x20
  (comparison mask = 0xffffff)
@@ -74,7 +71,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-295948-gfc11440 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jun 8 23:52:57 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-297092-gbc4c75f (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 13 02:20:10 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
@@ -109,7 +106,7 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2838516K/2988032K available (8892K kernel code, 1088K rwdata, 4312K rodata, 1088K init, 398K bss, 133132K reserved, 16384K cma-reserved)
+Memory: 2838516K/2988032K available (8892K kernel code, 1088K rwdata, 4320K rodata, 1088K init, 398K bss, 133132K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -117,7 +114,7 @@
     .rodata : 0xffff000008930000 - 0xffff000008d70000   (  4352 KB)
       .init : 0xffff000008d70000 - 0xffff000008e80000   (  1088 KB)
       .data : 0xffff000008e80000 - 0xffff000008f90200   (  1089 KB)
-       .bss : 0xffff000008f90200 - 0xffff000008ff3b30   (   399 KB)
+       .bss : 0xffff000008f90200 - 0xffff000008ff3bc0   (   399 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -143,7 +140,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x8c9: expected 0x2004f400
+boot misc3 0x8ca: expected 0x2004f400
  (comparison mask = 0xffffffff)
 boot misc1 0x0: expected 0x20
  (comparison mask = 0xffffff)
@@ -230,14 +227,14 @@
 Unpacking initramfs...
 Freeing initrd memory: 1280K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8091a000
+kvm [1]: IDMAP page: 8091f000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.287:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.286:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -278,9 +275,9 @@
 PP1100_SOC_RTC: Bringing 1000000uV into 850000-850000uV
 max77620-ldo5: supplied by regulator-dummy
 PP2800L_FCAM: Bringing 3100000uV into 2800000-2800000uV
-random: fast init done
 max77620-ldo6: supplied by regulator-dummy
 PP_LDO6: Bringing 2800000uV into 1800000-1800000uV
+random: fast init done
 max77620-ldo7: supplied by regulator-dummy
 max77620-ldo8: supplied by regulator-dummy
 hisi_sas: driver version v1.6
@@ -337,22 +334,22 @@
 Key type dns_resolver registered
 registered taskstats version 1
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-input: gpio-keys as /devices/platform/gpio-keys/input/input0
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2001-03-20 12:18:48 UTC (985090728)
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+max77686-rtc max77620-rtc: setting system clock to 2001-03-24 14:45:57 UTC (985445157)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
 PP2800L_FCAM: disabling
 PP_LDO6: disabling
 PPLCD_VDD: disabling
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1800_LCDIO: disabling
 PP1800_CAM: disabling
 ALSA device list:
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.595025496 -0700
+++ /tmp/foob	2017-06-13 02:22:02.595025496 -0700
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################
-	 3.2 MiB/s
+	 #######################
+	 3.1 MiB/s
 done
-Bytes transferred = 7947552 (794520 hex)
+Bytes transferred = 7963632 (7983f0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x794520 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7983f0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jun 8 23:49:00 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 13 02:15:31 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 efi: UEFI not found.
 cma: Reserved 64 MiB at 0xfb800000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157e100, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157e680, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993476K/2096128K available (10240K kernel code, 1559K rwdata, 4416K rodata, 2048K init, 402K bss, 37116K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993472K/2096128K available (10240K kernel code, 1560K rwdata, 4424K rodata, 2048K init, 402K bss, 37120K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1585d70   (1560 kB)
-       .bss : 0xc158ecd4 - 0xc15f36cc   ( 403 kB)
+      .data : 0xc1400000 - 0xc15862f0   (1561 kB)
+       .bss : 0xc158fcd4 - 0xc15f4554   ( 403 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -319,8 +319,8 @@
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
@@ -399,5 +399,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.154096] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.154034] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-06-13 02:22:02.603025533 -0700
+++ /tmp/foob	2017-06-13 02:22:02.603025533 -0700
@@ -37,21 +37,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################
-	 3.3 MiB/s
+	 ############################
+	 3.1 MiB/s
 done
-Bytes transferred = 6116744 (5d5588 hex)
+Bytes transferred = 6122352 (5d6b70 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 711.9 KiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d5588 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d6b70 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc4-next-20170609-177707-gfc11440 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jun 8 23:49:06 PDT 2017
+Linux version 4.12.0-rc5-next-20170613-178851-gbc4c75f (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 13 02:15:43 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,7 +69,7 @@
 Memory policy: Data cache writealloc
 cma: Reserved 64 MiB at 0xfbc00000
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead140, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0ead480, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998492K/2096128K available (9216K kernel code, 733K rwdata, 2716K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998492K/2096128K available (9216K kernel code, 734K rwdata, 2720K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,8 +92,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7738   ( 734 kB)
-       .bss : 0xc0ec161c - 0xc0f0c57c   ( 300 kB)
+      .data : 0xc0e00000 - 0xc0eb7a78   ( 735 kB)
+       .bss : 0xc0ec1610 - 0xc0f0c584   ( 300 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -394,4 +394,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.410193] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.420161] usb 2-1: new high-speed USB device number 2 using tegra-ehci
