Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.290070485 -0700
+++ /tmp/foob	2017-05-22 21:56:20.290070485 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-291841-gc696b44 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 21 23:38:31 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-292075-gf482797 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon May 22 21:54:36 PDT 2017
 Boot CPU: AArch64 Processor [411fd070]
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
@@ -30,7 +30,7 @@
 Policy zone: DMA
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
-Memory: 999804K/1048576K available (8828K kernel code, 1090K rwdata, 4260K rodata, 1088K init, 396K bss, 32388K reserved, 16384K cma-reserved)
+Memory: 999804K/1048576K available (8828K kernel code, 1090K rwdata, 4264K rodata, 1088K init, 396K bss, 32388K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -115,7 +115,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.710:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.747:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -182,7 +182,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-05-22 06:39:16 UTC (1495435156)
+rtc-pl031 9010000.pl031: setting system clock to 2017-05-23 04:55:22 UTC (1495515322)
 ALSA device list:
   No soundcards found.
 EXT4-fs (vda2): couldn't mount as ext3 due to feature incompatibilities
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.334070672 -0700
+++ /tmp/foob	2017-05-22 21:56:20.338070690 -0700
@@ -42,21 +42,305 @@
 	 ####################
 	 3.1 MiB/s
 done
-Bytes transferred = 7919272 (78d6a8 hex)
+Bytes transferred = 7921024 (78dd80 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x78d6a8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x78dd80 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
 
 Starting kernel ...
 
+Booting Linux on physical CPU 0x0
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 22 21:50:36 PDT 2017
+CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+OF: fdt: Machine model: NVIDIA Tegra114 Dalmore evaluation board
+debug: ignoring loglevel setting.
+Memory policy: Data cache writealloc
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 64 MiB at 0xfb800000
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c1581480, node_mem_map eeff8000
+  DMA zone: 1536 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 196608 pages, LIFO batch:31
+  HighMem zone: 327424 pages, LIFO batch:31
+percpu: Embedded 17 pages/cpu @eef98000 s39168 r8192 d22272 u69632
+pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1993540K/2096128K available (10240K kernel code, 1572K rwdata, 4388K rodata, 2048K init, 401K bss, 37052K reserved, 65536K cma-reserved, 1244160K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0d00000   (11232 kB)
+      .init : 0xc1200000 - 0xc1400000   (2048 kB)
+      .data : 0xc1400000 - 0xc15890f0   (1573 kB)
+       .bss : 0xc1592cc8 - 0xc15f7418   ( 402 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	RCU event tracing is enabled.
+	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+Tegra clk 127: register failed with -17
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+arch_timer: cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80300000 - 0x803000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+Serial: AMBA PL011 UART driver
+tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered
+AT91: Could not find identification node
+dvdd_ts: Failed to request enable GPIO61: -517
+reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
+usb1_vbus: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+usb2_vbus: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+tps65090 2-0048: No cache defaults, reading back from HW
+TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
+TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
+TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
+TPS65090_RAILSFET1: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+TPS65090_RAILSFET3: supplied by vdd-sys-3v3
+TPS65090_RAILSFET4: supplied by vdd-sys-3v3
+TPS65090_RAILSFET5: supplied by vdd-sys-3v3
+TPS65090_RAILSFET6: supplied by vdd-sys-3v3
+TPS65090_RAILSFET7: supplied by vdd-sys-3v3
+TPS65090_RAILSLDO1: supplied by vdd_ac_bat
+TPS65090_RAILSLDO2: supplied by vdd_ac_bat
+palmas 2-0058: Irq flag is 0x00000004
+palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+SMPS12: supplied by vdd-ao
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+SMPS3: supplied by vdd-ao
+SMPS457: supplied by vdd-sys-3v3
+SMPS6: supplied by regulator-dummy
+SMPS8: supplied by vdd-sys-3v3
+random: fast init done
+SMPS9: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV
+SMPS10_OUT2: supplied by regulator-dummy
+SMPS10_OUT1: supplied by regulator-dummy
+LDO1: supplied by vdd-sys-3v3
+LDO2: supplied by vdd-sys-3v3
+LDO3: supplied by vddio-1v8
+LDO4: supplied by vdd-sys-3v3
+LDO5: supplied by vdd_ac_bat
+LDO6: supplied by vdd-sys-3v3
+vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV
+LDO7: supplied by vdd-sys-3v3
+LDO8: supplied by vdd-ao
+vdd-rtc: Bringing 675000uV into 900000-900000uV
+LDO9: supplied by sdhci-vdd-sd-slot
+LDOLN: supplied by vdd-sys-5v0
+LDOUSB: supplied by vdd-sys-5v0
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+clocksource: Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.32 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+STMicroelectronics ASC driver initialized
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+brd: module loaded
+loop: module loaded
+m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
+tegra-ehci: Tegra EHCI driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
+usbcore: registered new interface driver usb-storage
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+sbs-battery 0-000b: sbs_probe: Failed to get device status
+sbs-battery: probe of 0-000b failed with error -121
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 10
+Segment Routing with IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
+usb1_vbus: supplied by vdd-sys-5v0
+mmc0: new high speed SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+usb2_vbus: supplied by vdd-sys-5v0
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+ mmcblk0: p1 p2 p3
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+mmc1: new high speed MMC card at address 0001
+mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
+mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-03-16 16:29:22 UTC (984760162)
+vdd_hdmi_5v0: disabling
+dvdd_ts: disabling
+usb1_vbus: disabling
+vdd_cam_1v8_reg: disabling
+VDD_5V0_HDMI_CON: disabling
+EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk1p1): recovery complete
+EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:17.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.439037] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.366070810 -0700
+++ /tmp/foob	2017-05-22 21:56:20.370070826 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -40,18 +40,18 @@
 	 ##########################
 	 3.2 MiB/s
 done
-Bytes transferred = 6104848 (5d2710 hex)
+Bytes transferred = 6105720 (5d2a78 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d2710 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d2a78 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-173600-gc696b44 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 21 23:34:23 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 22 21:50:11 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -81,3 +81,260 @@
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1998564K/2096128K available (9216K kernel code, 740K rwdata, 2700K rodata, 1024K init, 299K bss, 32028K reserved, 65536K cma-reserved, 1244160K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc0a00000   (10208 kB)
+      .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
+      .data : 0xc0e00000 - 0xc0eb91b8   ( 741 kB)
+       .bss : 0xc0ec3610 - 0xc0f0e40c   ( 300 kB)
+Preemptible hierarchical RCU implementation.
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+Tegra clk 127: register failed with -17
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+arch_timer: cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80100000 - 0x801000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered
+dvdd_ts: Failed to request enable GPIO61: -517
+reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
+usb1_vbus: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+usb2_vbus: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+tps65090 2-0048: No cache defaults, reading back from HW
+TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
+TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
+TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
+TPS65090_RAILSFET1: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+TPS65090_RAILSFET3: supplied by vdd-sys-3v3
+TPS65090_RAILSFET4: supplied by vdd-sys-3v3
+TPS65090_RAILSFET5: supplied by vdd-sys-3v3
+TPS65090_RAILSFET6: supplied by vdd-sys-3v3
+TPS65090_RAILSFET7: supplied by vdd-sys-3v3
+TPS65090_RAILSLDO1: supplied by vdd_ac_bat
+TPS65090_RAILSLDO2: supplied by vdd_ac_bat
+palmas 2-0058: Irq flag is 0x00000004
+palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+SMPS12: supplied by vdd-ao
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+SMPS3: supplied by vdd-ao
+SMPS457: supplied by vdd-sys-3v3
+SMPS6: supplied by regulator-dummy
+SMPS8: supplied by vdd-sys-3v3
+random: fast init done
+SMPS9: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV
+SMPS10_OUT2: supplied by regulator-dummy
+SMPS10_OUT1: supplied by regulator-dummy
+LDO1: supplied by vdd-sys-3v3
+LDO2: supplied by vdd-sys-3v3
+LDO3: supplied by vddio-1v8
+LDO4: supplied by vdd-sys-3v3
+LDO5: supplied by vdd_ac_bat
+LDO6: supplied by vdd-sys-3v3
+vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV
+LDO7: supplied by vdd-sys-3v3
+LDO8: supplied by vdd-ao
+vdd-rtc: Bringing 675000uV into 900000-900000uV
+LDO9: supplied by sdhci-vdd-sd-slot
+LDOLN: supplied by vdd-sys-5v0
+LDOUSB: supplied by vdd-sys-5v0
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.22
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+clocksource: Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [earlycon0] disabled
+bootconsole [earlycon0] disabled
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+loop: module loaded
+m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+sbs-battery 0-000b: sbs_probe: Failed to get device status
+sbs-battery: probe of 0-000b failed with error -121
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc0: new high speed SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+mmc1: new high speed MMC card at address 0001
+mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
+mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+ mmcblk0: p1 p2 p3
+mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
+NET: Registered protocol family 10
+Segment Routing with IPv6
+mip6: Mobile IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
+usb1_vbus: supplied by vdd-sys-5v0
+usb2_vbus: supplied by vdd-sys-5v0
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-03-16 16:26:44 UTC (984760004)
+vdd_hdmi_5v0: disabling
+dvdd_ts: disabling
+usb1_vbus: disabling
+vdd_cam_1v8_reg: disabling
+VDD_5V0_HDMI_CON: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Dalmore
+EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk1p1): recovery complete
+EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:17.
+devtmpfs: mounted
+Freeing unused kernel memory: 1024K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.658366] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.374070843 -0700
+++ /tmp/foob	2017-05-22 21:56:20.378070861 -0700
@@ -35,9 +35,9 @@
 	 #################################################################
 	 #################################################################
 	 ####################
-	 3.9 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 7919272 (78d6a8 hex)
+Bytes transferred = 7921024 (78dd80 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -48,10 +48,413 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x78d6a8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x78dd80 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
 
 Starting kernel ...
 
+Booting Linux on physical CPU 0x0
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 22 21:50:36 PDT 2017
+CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1
+debug: ignoring loglevel setting.
+Memory policy: Data cache writealloc
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 64 MiB at 0xfb800000
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c1581480, node_mem_map eeff8000
+  DMA zone: 1536 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 196608 pages, LIFO batch:31
+  HighMem zone: 327424 pages, LIFO batch:31
+percpu: Embedded 17 pages/cpu @eef82000 s39168 r8192 d22272 u69632
+pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1993420K/2096128K available (10240K kernel code, 1572K rwdata, 4388K rodata, 2048K init, 401K bss, 37172K reserved, 65536K cma-reserved, 1244160K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0d00000   (11232 kB)
+      .init : 0xc1200000 - 0xc1400000   (2048 kB)
+      .data : 0xc1400000 - 0xc15890f0   (1573 kB)
+       .bss : 0xc1592cc8 - 0xc15f7418   ( 402 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	RCU event tracing is enabled.
+	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+Tegra clk 127: register failed with -17
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+arch_timer: cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80300000 - 0x803000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+Serial: AMBA PL011 UART driver
+AT91: Could not find identification node
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
++USB0_VBUS_SW: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
++5V_USB_HS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
++5V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
++12V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+clocksource: Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.32 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+ usb2-0: usb2-0 supply vbus not found, using dummy regulator
+ usb2-1: usb2-1 supply vbus not found, using dummy regulator
+tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: emergency thermal reset enabled
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+STMicroelectronics ASC driver initialized
+70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART
+70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+brd: module loaded
+loop: module loaded
+at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
+as3722 4-0040: AS3722 with revision 0x1 found
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: bypassed regulator has no supply!
++VDDIO_SDMMC3: failed to get the current voltage(-517)
+as3722-regulator as3722-regulator: regulator 13 register failed -517
+tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
+random: fast init done
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+tegra-phy 7d004000.usb-phy: no vbus regulator
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
+tegra-ehci: Tegra EHCI driver
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 354, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
+usbcore: registered new interface driver usb-storage
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 377
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 10
+Segment Routing with IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
++USB0_VBUS_SW: supplied by +5V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: supplied by +3.3V_SYS
++5V_HDMI_CON: supplied by +5V_SYS
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+mmc0: new high speed MMC card at address 0001
+ usb2-0: usb2-0 supply vbus not found, using dummy regulator
+ usb2-1: usb2-1 supply vbus not found, using dummy regulator
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+as3722-sd2: supplied by +5V_SYS
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+ mmcblk0: p1
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+as3722-ldo1: supplied by +3.3V_RUN
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
+as3722-ldo6: supplied by +3.3V_RUN
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
+as3722-ldo11: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
+ata2: DUMMY
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
+pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
+pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
+pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
+PCI: bus2: Fast back to back transfers disabled
+pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
+pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
+pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
+pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
+pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:02.0: PCI bridge to [bus 02]
+pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0142)
+pcieport 0000:00:01.0: Signaling PME with IRQ 393
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:02.0: enabling device (0140 -> 0143)
+pcieport 0000:00:02.0: Signaling PME with IRQ 394
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:02:00.0: enabling device (0140 -> 0143)
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b72000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
+cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
+cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:37 UTC (946684897)
++3.3V_AVDD_HDMI_AP_GATED: disabling
++USB0_VBUS_SW: disabling
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++5V_HDMI_CON: disabling
++1.8V_RUN_CAM: disabling
++2.8V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++3.3V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.386070895 -0700
+++ /tmp/foob	2017-05-22 21:56:20.386070895 -0700
@@ -33,9 +33,9 @@
 	 #################################################################
 	 #################################################################
 	 ##########################
-	 3.9 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6104848 (5d2710 hex)
+Bytes transferred = 6105720 (5d2a78 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d2710 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d2a78 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-173600-gc696b44 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 21 23:34:23 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 22 21:50:11 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,3 +76,393 @@
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1998444K/2096128K available (9216K kernel code, 740K rwdata, 2700K rodata, 1024K init, 299K bss, 32148K reserved, 65536K cma-reserved, 1244160K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc0a00000   (10208 kB)
+      .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
+      .data : 0xc0e00000 - 0xc0eb91b8   ( 741 kB)
+       .bss : 0xc0ec3610 - 0xc0f0e40c   ( 300 kB)
+Preemptible hierarchical RCU implementation.
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+Tegra clk 127: register failed with -17
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+arch_timer: cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80100000 - 0x801000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
++USB0_VBUS_SW: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
++5V_USB_HS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
++5V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
++12V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.22
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+clocksource: Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+ usb2-0: usb2-0 supply vbus not found, using dummy regulator
+ usb2-1: usb2-1 supply vbus not found, using dummy regulator
+tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: emergency thermal reset enabled
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [earlycon0] disabled
+bootconsole [earlycon0] disabled
+70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART
+70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+loop: module loaded
+at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
+as3722 4-0040: AS3722 with revision 0x1 found
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: bypassed regulator has no supply!
++VDDIO_SDMMC3: failed to get the current voltage(-517)
+as3722-regulator as3722-regulator: regulator 13 register failed -517
+tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
+random: fast init done
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+tegra-phy 7d004000.usb-phy: no vbus regulator
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 354, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 377
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+ mmcblk0: p1
+tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
+input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0
+NET: Registered protocol family 10
+Segment Routing with IPv6
+mip6: Mobile IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
++USB0_VBUS_SW: supplied by +5V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: supplied by +3.3V_SYS
++5V_HDMI_CON: supplied by +5V_SYS
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+ usb2-0: usb2-0 supply vbus not found, using dummy regulator
+ usb2-1: usb2-1 supply vbus not found, using dummy regulator
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+as3722-ldo1: supplied by +3.3V_RUN
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
+as3722-ldo6: supplied by +3.3V_RUN
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
+as3722-ldo11: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
+ata2: DUMMY
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 347, io mem 0x70090000
+hub 3-0:1.0: USB hub found
+hub 3-0:1.0: 6 ports detected
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4
+usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 4-0:1.0: USB hub found
+hub 4-0:1.0: 2 ports detected
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+ata1: SATA link down (SStatus 0 SControl 300)
+tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
+pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
+pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
+PCI: bus2: Fast back to back transfers disabled
+pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
+pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
+pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
+pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
+pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:02.0: PCI bridge to [bus 02]
+pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0142)
+pcieport 0000:00:01.0: Signaling PME with IRQ 393
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:02.0: enabling device (0140 -> 0143)
+pcieport 0000:00:02.0: Signaling PME with IRQ 394
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:02:00.0: enabling device (0140 -> 0143)
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0c01000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
+cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
+cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
+input: gpio-keys as /devices/soc0/gpio-keys/input/input2
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
++3.3V_AVDD_HDMI_AP_GATED: disabling
++USB0_VBUS_SW: disabling
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++5V_HDMI_CON: disabling
++1.8V_RUN_CAM: disabling
++2.8V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++3.3V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
+ALSA device list:
+  #0: tegra-hda at 0x70038000 irq 346
+  #1: NVIDIA Tegra Jetson TK1
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 1024K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.402070963 -0700
+++ /tmp/foob	2017-05-22 21:56:20.406070981 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -45,21 +45,345 @@
 	 ####################
 	 3.5 MiB/s
 done
-Bytes transferred = 7919272 (78d6a8 hex)
+Bytes transferred = 7921024 (78dd80 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x78d6a8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x78dd80 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
 
 Starting kernel ...
 
+Booting Linux on physical CPU 0x0
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 22 21:50:36 PDT 2017
+CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+OF: fdt: Machine model: Acer Chromebook 13 CB5-311
+OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000
+debug: ignoring loglevel setting.
+Memory policy: Data cache writealloc
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 64 MiB at 0xfb800000
+On node 0 totalpages: 524287
+free_area_init_node: node 0, pgdat c1581480, node_mem_map eeff8000
+  DMA zone: 1536 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 196608 pages, LIFO batch:31
+  HighMem zone: 327679 pages, LIFO batch:31
+percpu: Embedded 17 pages/cpu @eef81000 s39168 r8192 d22272 u69632
+pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522751
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1994436K/2097148K available (10240K kernel code, 1572K rwdata, 4388K rodata, 2048K init, 401K bss, 37176K reserved, 65536K cma-reserved, 1245180K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0d00000   (11232 kB)
+      .init : 0xc1200000 - 0xc1400000   (2048 kB)
+      .data : 0xc1400000 - 0xc15890f0   (1573 kB)
+       .bss : 0xc1592cc8 - 0xc15f7418   ( 402 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	RCU event tracing is enabled.
+	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+Tegra clk 127: register failed with -17
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+arch_timer: cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80300000 - 0x803000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+Serial: AMBA PL011 UART driver
+tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered
+AT91: Could not find identification node
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
++VDD_LED: Failed to request enable GPIO122: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
++5V_VDD_TS_SW: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517
++5V_USB_HS: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
++5V_USB_SS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT
+tegra-emc: probe of 7001b000.emc failed with error -2
+clocksource: Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.32 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+STMicroelectronics ASC driver initialized
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+brd: module loaded
+loop: module loaded
+as3722 4-0040: AS3722 with revision 0x1 found
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
++1.05V_RUN: Bringing 0uV into 1050000-1050000uV
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+random: fast init done
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
+tegra-ehci: Tegra EHCI driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
+usbcore: registered new interface driver usb-storage
+elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 372
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 10
+Segment Routing with IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
++3.3V_RUN: supplied by +3.3V_SYS
++VDD_LED: supplied by +VDD_MUX
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
++5V_VDD_TS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
++5V_USB_SS: supplied by +5V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+elan_i2c 1-0015: failed to read report data: -121
++5V_HDMI_CON: supplied by +5V_SYS
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+ usb3-1: usb3-1 supply vbus not found, using dummy regulator
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: Switching to 3.3V signalling voltage failed
+mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
+elan_i2c 1-0015: invalid report id data (ff)
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc2: Unknown controller version (3). You may experience problems.
+mmc2: Invalid maximum block size, assuming 512 bytes
+mmc1: new high speed SDIO card at address 0001
+mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
++3.3V_AVDD_HDMI_AP_GATED: disabling
++1.05V_RUN: disabling
++1.8V_RUN_CAM: disabling
++3.3V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++2.8V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
++VDD_LED: disabling
++5V_VDD_TS_SW: disabling
++5V_USB_HS: disabling
++5V_USB_SS: disabling
++3.3V_PANEL: disabling
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++5V_HDMI_CON: disabling
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+EXT4-fs (mmcblk0p3): recovery complete
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.418071032 -0700
+++ /tmp/foob	2017-05-22 21:56:20.418071032 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -38,24 +38,23 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################################EHCI timed out on TD - token=0x88008d80
-T T ############
+	 #################################################################
 	 #################################################################
 	 ##########################
-	 436.5 KiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 6104848 (5d2710 hex)
+Bytes transferred = 6105720 (5d2a78 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5d2710 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5d2a78 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -64,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-173600-gc696b44 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 21 23:34:23 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 22 21:50:11 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -86,3 +85,311 @@
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522751
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1999460K/2097148K available (9216K kernel code, 740K rwdata, 2700K rodata, 1024K init, 299K bss, 32152K reserved, 65536K cma-reserved, 1245180K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc0a00000   (10208 kB)
+      .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
+      .data : 0xc0e00000 - 0xc0eb91b8   ( 741 kB)
+       .bss : 0xc0ec3610 - 0xc0f0e40c   ( 300 kB)
+Preemptible hierarchical RCU implementation.
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+Tegra clk 127: register failed with -17
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+arch_timer: cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80100000 - 0x801000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
++VDD_LED: Failed to request enable GPIO122: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
++5V_VDD_TS_SW: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517
++5V_USB_HS: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
++5V_USB_SS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT
+tegra-emc: probe of 7001b000.emc failed with error -2
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.22
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+clocksource: Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [earlycon0] disabled
+bootconsole [earlycon0] disabled
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+loop: module loaded
+as3722 4-0040: AS3722 with revision 0x1 found
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
++1.05V_RUN: Bringing 0uV into 1050000-1050000uV
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+cros-ec-spi spi32766.0: packet too long (249 bytes, expected 4)
+cros-ec-spi spi32766.0: Chrome EC device registered
+random: fast init done
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 372
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+max98090 0-0010: MAX98090 REVID=0x43
+max98090 0-0010: use default 2.8v micbias
+tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
+input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+NET: Registered protocol family 10
+Segment Routing with IPv6
+mip6: Mobile IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
++VDD_LED: supplied by +VDD_MUX
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
++5V_VDD_TS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
++5V_USB_SS: supplied by +5V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
++5V_HDMI_CON: supplied by +5V_SYS
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+ usb3-1: usb3-1 supply vbus not found, using dummy regulator
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 344, io mem 0x70090000
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 6 ports detected
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2
+usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 2 ports detected
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: Switching to 3.3V signalling voltage failed
+mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc2: Unknown controller version (3). You may experience problems.
+mmc2: Invalid maximum block size, assuming 512 bytes
+mmc1: new high speed SDIO card at address 0001
+mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+input: gpio-keys as /devices/soc0/gpio-keys/input/input3
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
++3.3V_AVDD_HDMI_AP_GATED: disabling
++1.8V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++2.8V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
++VDD_LED: disabling
++5V_VDD_TS_SW: disabling
++3.3V_PANEL: disabling
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++5V_HDMI_CON: disabling
+ALSA device list:
+  #1: GoogleNyanBig
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+EXT4-fs (mmcblk0p3): recovery complete
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
+Freeing unused kernel memory: 1024K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.989008] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.442071135 -0700
+++ /tmp/foob	2017-05-22 21:56:20.442071135 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801311 us
+Bootloader-Cpu Init at (time stamp): 1801434 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801285  us
-Bootloader (AosInit) time: 733428 us
-Bootloader Main Init time: 180052 us
-BlockDevMgrInit time: 157534 us
+Miscellaneous avp time: 1801408  us
+Bootloader (AosInit) time: 733440 us
+Bootloader Main Init time: 180102 us
+BlockDevMgrInit time: 157530 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77057 us 
-Display init time: 574679 us
-Kernel read time: 390 msec
+Partition Table load: 77100 us 
+Display init time: 574512 us
+Kernel read time: 391 msec
 Load Kernel Size:   16986112 Bytes
-Bl Kernel ReadSpeed: 43554000 Bytes/sec
-Pre-Kernel Jump time: 1792874 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5913963 us
+Bl Kernel ReadSpeed: 43442000 Bytes/sec
+Pre-Kernel Jump time: 1792272 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5912413 us
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-291841-gc696b44 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 21 23:38:31 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-292075-gf482797 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon May 22 21:54:36 PDT 2017
 Boot CPU: AArch64 Processor [4e0f0000]
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
@@ -103,7 +103,7 @@
 Policy zone: DMA
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
 PID hash table entries: 4096 (order: 3, 32768 bytes)
-Memory: 1709020K/1775616K available (8828K kernel code, 1090K rwdata, 4260K rodata, 1088K init, 396K bss, 50212K reserved, 16384K cma-reserved)
+Memory: 1709020K/1775616K available (8828K kernel code, 1090K rwdata, 4264K rodata, 1088K init, 396K bss, 50212K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -199,7 +199,7 @@
 Freeing initrd memory: 1284K
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.919:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.918:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -264,22 +264,23 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 NET: Registered protocol family 17
-9pnet: Installing 9P2000 support
 mmc0: new high speed MMC card at address 0001
-Key type dns_resolver registered
-registered taskstats version 1
+9pnet: Installing 9P2000 support
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+Key type dns_resolver registered
+registered taskstats version 1
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-+VDD_LED: supplied by +VDD_MUX
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
++VDD_LED: supplied by +VDD_MUX
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
 hctosys: unable to open rtc device (rtc0)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
@@ -291,7 +292,6 @@
   No soundcards found.
 devtmpfs: mounted
 Freeing unused kernel memory: 1088K
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.462071220 -0700
+++ /tmp/foob	2017-05-22 21:56:20.466071238 -0700
@@ -48,23 +48,322 @@
 	 #################################################################
 	 #################################################################
 	 ####################
-	 4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 7919272 (78d6a8 hex)
+Bytes transferred = 7921024 (78dd80 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x78d6a8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x78dd80 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
 
 Starting kernel ...
 
+Booting Linux on physical CPU 0x0
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 22 21:50:36 PDT 2017
+CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+OF: fdt: Machine model: Compulab TrimSlice board
+debug: ignoring loglevel setting.
+Memory policy: Data cache writealloc
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 64 MiB at 0x3c000000
+On node 0 totalpages: 262144
+free_area_init_node: node 0, pgdat c1581480, node_mem_map ef7f8000
+  DMA zone: 1536 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 196608 pages, LIFO batch:31
+  HighMem zone: 65536 pages, LIFO batch:15
+percpu: Embedded 17 pages/cpu @ef7c4000 s39168 r8192 d22272 u69632
+pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+pcpu-alloc: [0] 0 [0] 1 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 954368K/1048576K available (10240K kernel code, 1572K rwdata, 4388K rodata, 2048K init, 401K bss, 28672K reserved, 65536K cma-reserved, 196608K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0d00000   (11232 kB)
+      .init : 0xc1200000 - 0xc1400000   (2048 kB)
+      .data : 0xc1400000 - 0xc15890f0   (1573 kB)
+       .bss : 0xc1592cc8 - 0xc15f7418   ( 402 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
+Hierarchical RCU implementation.
+	RCU event tracing is enabled.
+	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 errata 727915 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 ID prefetch enabled, offset 1 lines
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x300000 - 0x3000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+smp: Brought up 1 node, 2 CPUs
+SMP: Total of 2 processors activated (4.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 512 (order: 3, 32768 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+Serial: AMBA PL011 UART driver
+AT91: Could not find identification node
+usb1_vbus: Failed to request enable GPIO170: -517
+reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+clocksource: Switched to clocksource timer_us
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: no interrupt-affinity property for /pmu, guessing.
+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=18 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.32 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-pcie 80003000.pcie-controller: dual-mode configuration
+tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff]
+pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+Disabling cpuidle LP2 state, since PCIe IRQs are in use
+pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
+pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
+pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa00fffff]
+pci 0000:00:01.0:   bridge window [mem 0xa8000000-0xa80fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0143)
+pcieport 0000:00:01.0: Signaling PME with IRQ 295
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+STMicroelectronics ASC driver initialized
+tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+brd: module loaded
+loop: module loaded
+m25p80 spi32766.0: found s25fl008k, expected w25q80bl
+m25p80 spi32766.0: s25fl008k (1024 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08fc000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+tegra-phy c5004000.usb-phy: no vbus regulator
+tegra-phy c5008000.usb-phy: no vbus regulator
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
+tegra-ehci: Tegra EHCI driver
+ulpi_phy_power_on: ulpi write failed
+tegra-ehci c5004000.usb: Failed to power on the phy
+tegra-ehci: probe of c5004000.usb failed with error -110
+tegra-ehci c5008000.usb: EHCI Host Controller
+tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
+tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
+usbcore: registered new interface driver usb-storage
+rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 10
+Segment Routing with IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+tegra-ehci c5000000.usb: EHCI Host Controller
+tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+hub 1-1:1.0: USB hub found
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+rtc-em3027 2-0056: hctosys: unable to read the hardware clock
+hub 1-1:1.0: 4 ports detected
+Waiting for root device PARTUUID=11eb23c1-01...
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address b368
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+random: fast init done
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:17.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/#  
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.470071254 -0700
+++ /tmp/foob	2017-05-22 21:56:20.474071271 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -46,9 +46,9 @@
 	 #################################################################
 	 #################################################################
 	 ##########################
-	 4.1 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6104848 (5d2710 hex)
+Bytes transferred = 6105720 (5d2a78 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5d2710 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5d2a78 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-173600-gc696b44 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 21 23:34:23 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 22 21:50:11 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -88,3 +88,275 @@
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 959392K/1048576K available (9216K kernel code, 740K rwdata, 2700K rodata, 1024K init, 299K bss, 23648K reserved, 65536K cma-reserved, 196608K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc0a00000   (10208 kB)
+      .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
+      .data : 0xc0e00000 - 0xc0eb91b8   ( 741 kB)
+       .bss : 0xc0ec3610 - 0xc0f0e40c   ( 300 kB)
+Preemptible hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 errata 727915 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 ID prefetch enabled, offset 1 lines
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x100000 - 0x1000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+smp: Brought up 1 node, 2 CPUs
+SMP: Total of 2 processors activated (4.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 512 (order: 3, 32768 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+usb1_vbus: Failed to request enable GPIO170: -517
+reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.22
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+clocksource: Switched to clocksource timer_us
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: no interrupt-affinity property for /pmu, guessing.
+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=18 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra-pcie 80003000.pcie-controller: dual-mode configuration
+tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff]
+pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+Disabling cpuidle LP2 state, since PCIe IRQs are in use
+pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
+pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
+pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa00fffff]
+pci 0000:00:01.0:   bridge window [mem 0xa8000000-0xa80fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0143)
+pcieport 0000:00:01.0: Signaling PME with IRQ 295
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [earlycon0] disabled
+bootconsole [earlycon0] disabled
+tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+loop: module loaded
+m25p80 spi32766.0: found s25fl008k, expected w25q80bl
+m25p80 spi32766.0: s25fl008k (1024 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08e1000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+tegra-phy c5004000.usb-phy: no vbus regulator
+tegra-phy c5008000.usb-phy: no vbus regulator
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+ulpi_phy_power_on: ulpi write failed
+tegra-ehci c5004000.usb: Failed to power on the phy
+tegra-ehci: probe of c5004000.usb failed with error -110
+tegra-ehci c5008000.usb: EHCI Host Controller
+tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
+tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
+NET: Registered protocol family 10
+Segment Routing with IPv6
+mip6: Mobile IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
+tegra-ehci c5000000.usb: EHCI Host Controller
+tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+ mmcblk1: p1 p2
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+rtc-em3027 2-0056: hctosys: unable to read the hardware clock
+ALSA device list:
+  #0: tegra-trimslice
+Waiting for root device PARTUUID=11eb23c1-01...
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address b368
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+random: fast init done
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:17.
+devtmpfs: mounted
+Freeing unused kernel memory: 1024K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/#  
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.482071306 -0700
+++ /tmp/foob	2017-05-22 21:56:20.486071323 -0700
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 836922 us
-Basic modules init took 348761 us
+Tegraboot started after 737158 us
+Basic modules init took 350225 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14380 us
-Carveout took 252724 us
-CPU initialization took 92397 us
-Total time taken by TegraBoot 708262 us
+Next stage binary read took 14390 us
+Carveout took 252713 us
+CPU initialization took 92324 us
+Total time taken by TegraBoot 709652 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.674] LPDDR4 Training: Number of tables = 10
+64b[0001.578] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-15665664 bytes read in 812 ms (18.4 MiB/s)
+15665664 bytes read in 811 ms (18.4 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-45142 bytes read in 460 ms (95.7 KiB/s)
+45142 bytes read in 459 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-291841-gc696b44 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 21 23:38:31 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-292075-gf482797 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon May 22 21:54:36 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
@@ -175,7 +175,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2983376K/3131392K available (8828K kernel code, 1090K rwdata, 4260K rodata, 1088K init, 396K bss, 131632K reserved, 16384K cma-reserved)
+Memory: 2983376K/3131392K available (8828K kernel code, 1090K rwdata, 4264K rodata, 1088K init, 396K bss, 131632K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -275,7 +275,7 @@
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.535:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.531:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -356,6 +356,6 @@
 devtmpfs: mounted
 Freeing unused kernel memory: 1088K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job contr[    1.327276] random: fast init done
+bash: no job contr[    1.363593] random: fast init done
 ol in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.502071391 -0700
+++ /tmp/foob	2017-05-22 21:56:20.506071409 -0700
@@ -1,9 +1,4 @@
-
-Machine model: Google Pixel C
-efi: Getting EFI parameters from FDT:
-efi: UEFI not found.
-cma: Reserved 16 MiB at 0x00000000f5400000
-earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
+000] earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
 bootconsole [uart0] enabled
 NUMA: No NUMA configuration found
 NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
@@ -32,7 +27,7 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2838640K/2988032K available (8828K kernel code, 1090K rwdata, 4260K rodata, 1088K init, 396K bss, 133008K reserved, 16384K cma-reserved)
+Memory: 2838640K/2988032K available (8828K kernel code, 1090K rwdata, 4264K rodata, 1088K init, 396K bss, 133008K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -77,7 +72,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-291841-gc696b44 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 21 23:38:31 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-292075-gf482797 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon May 22 21:54:36 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
@@ -112,7 +107,7 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2838640K/2988032K available (8828K kernel code, 1090K rwdata, 4260K rodata, 1088K init, 396K bss, 133008K reserved, 16384K cma-reserved)
+Memory: 2838640K/2988032K available (8828K kernel code, 1090K rwdata, 4264K rodata, 1088K init, 396K bss, 133008K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -235,7 +230,7 @@
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.289:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -334,14 +329,14 @@
 Key type dns_resolver registered
 registered taskstats version 1
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-input: gpio-keys as /devices/platform/gpio-keys/input/input0
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 mmc0: new high speed MMC card at address 0001
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2001-03-02 12:04:37 UTC (983534677)
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
+max77686-rtc max77620-rtc: setting system clock to 2001-03-03 10:20:43 UTC (983614843)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_AVDD: disabling
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.510071425 -0700
+++ /tmp/foob	2017-05-22 21:56:20.514071442 -0700
@@ -42,7 +42,7 @@
 	 ####################
 	 3.3 MiB/s
 done
-Bytes transferred = 7919272 (78d6a8 hex)
+Bytes transferred = 7921024 (78dd80 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -53,10 +53,345 @@
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x78d6a8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x78dd80 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
 
 Starting kernel ...
 
+Booting Linux on physical CPU 0x0
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 22 21:50:36 PDT 2017
+CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
+debug: ignoring loglevel setting.
+Memory policy: Data cache writealloc
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 64 MiB at 0xfb800000
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c1581480, node_mem_map eeff8000
+  DMA zone: 1536 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 196608 pages, LIFO batch:31
+  HighMem zone: 327424 pages, LIFO batch:31
+percpu: Embedded 17 pages/cpu @eef88000 s39168 r8192 d22272 u69632
+pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1993460K/2096128K available (10240K kernel code, 1572K rwdata, 4388K rodata, 2048K init, 401K bss, 37132K reserved, 65536K cma-reserved, 1244160K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0d00000   (11232 kB)
+      .init : 0xc1200000 - 0xc1400000   (2048 kB)
+      .data : 0xc1400000 - 0xc15890f0   (1573 kB)
+       .bss : 0xc1592cc8 - 0xc15f7418   ( 402 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	RCU event tracing is enabled.
+	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 erratum 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 dynamic clock gating enabled, standby mode enabled
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80300000 - 0x803000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (8.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+Serial: AMBA PL011 UART driver
+tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered
+AT91: Could not find identification node
+vdd_5v_sata: Failed to request enable GPIO30: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+usb1_vbus: Failed to request enable GPIO238: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+usb3_vbus: Failed to request enable GPIO236: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+sys_3v3_pexs: Failed to request enable GPIO95: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+vrtc: supplied by vdd_5v_in
+vio: supplied by vdd_5v_in
+vdd1: supplied by vdd_5v_in
+vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV
+vdd2: supplied by vdd_5v_in
+ldo1: supplied by vdd_1v5_gen
+ldo2: supplied by vdd_1v5_gen
+vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV
+ldo3: supplied by vdd_5v_in
+ldo4: supplied by vdd_5v_in
+ldo5: supplied by vdd_5v_in
+ldo6: supplied by vdd_1v8_gen
+avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV
+ldo7: supplied by vdd_1v8_gen
+ldo8: supplied by vdd_1v8_gen
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+clocksource: Switched to clocksource timer_us
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: no interrupt-affinity property for /pmu, guessing.
+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.32 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+STMicroelectronics ASC driver initialized
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+brd: module loaded
+loop: module loaded
+m25p80 spi32766.1: w25q32 (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
+tegra-ehci: Tegra EHCI driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
+usbcore: registered new interface driver usb-storage
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+random: fast init done
+tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 10
+Segment Routing with IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
+vdd_ddr: supplied by vdd_5v_in
+vdd_5v_sata: supplied by vdd_5v_in
+usb1_vbus: supplied by vdd_5v_in
+usb3_vbus: supplied by vdd_5v_in
+sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
+sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+mmc1: new high speed MMC card at address 0001
+mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
+mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
+Primary GPT is invalid, using alternate GPT.
+ mmcblk1: p1 p2 p3 p4 p5
+ mmcblk0: p1 p2 p3
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, ignoring
+tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
+pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0143)
+pcieport 0000:00:01.0: Signaling PME with IRQ 374
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0b1c000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+vdd_sata,avdd_plle: disabling
+usb1_vbus: disabling
+EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
+EXT4-fs (mmcblk1p1): recovery complete
+EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    4.114384] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-22 21:56:20.518071460 -0700
+++ /tmp/foob	2017-05-22 21:56:20.522071477 -0700
@@ -40,7 +40,7 @@
 	 ##########################
 	 3.3 MiB/s
 done
-Bytes transferred = 6104848 (5d2710 hex)
+Bytes transferred = 6105720 (5d2a78 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5d2710 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5d2a78 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.12.0-rc1-next-20170522-173600-gc696b44 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 21 23:34:23 PDT 2017
+Linux version 4.12.0-rc2-next-20170523-173834-gf482797 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 22 21:50:11 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -80,3 +80,311 @@
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1998484K/2096128K available (9216K kernel code, 740K rwdata, 2700K rodata, 1024K init, 299K bss, 32108K reserved, 65536K cma-reserved, 1244160K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc0a00000   (10208 kB)
+      .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
+      .data : 0xc0e00000 - 0xc0eb91b8   ( 741 kB)
+       .bss : 0xc0ec3610 - 0xc0f0e40c   ( 300 kB)
+Preemptible hierarchical RCU implementation.
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 erratum 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 dynamic clock gating enabled, standby mode enabled
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80100000 - 0x801000a0
+Hierarchical SRCU implementation.
+Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+smp: Brought up 1 node, 4 CPUs
+SMP: Total of 4 processors activated (8.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered
+vdd_5v_sata: Failed to request enable GPIO30: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+usb1_vbus: Failed to request enable GPIO238: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+usb3_vbus: Failed to request enable GPIO236: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+sys_3v3_pexs: Failed to request enable GPIO95: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+vrtc: supplied by vdd_5v_in
+vio: supplied by vdd_5v_in
+vdd1: supplied by vdd_5v_in
+vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV
+vdd2: supplied by vdd_5v_in
+ldo1: supplied by vdd_1v5_gen
+ldo2: supplied by vdd_1v5_gen
+vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV
+ldo3: supplied by vdd_5v_in
+ldo4: supplied by vdd_5v_in
+ldo5: supplied by vdd_5v_in
+ldo6: supplied by vdd_1v8_gen
+avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV
+ldo7: supplied by vdd_1v8_gen
+ldo8: supplied by vdd_1v8_gen
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.22
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+clocksource: Switched to clocksource timer_us
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: no interrupt-affinity property for /pmu, guessing.
+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
+workingset: timestamp_bits=30 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [earlycon0] disabled
+bootconsole [earlycon0] disabled
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+loop: module loaded
+m25p80 spi32766.1: w25q32 (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+random: fast init done
+tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc1: new high speed MMC card at address 0001
+mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
+mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
+mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk1: p1 p2 p3 p4 p5
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
+ mmcblk0: p1 p2 p3
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
+NET: Registered protocol family 10
+Segment Routing with IPv6
+mip6: Mobile IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20170425 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20170425)
+can: broadcast manager protocol (rev 20170425 t)
+can: netlink gateway (rev 20170425) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
+vdd_ddr: supplied by vdd_5v_in
+vdd_5v_sata: supplied by vdd_5v_in
+usb1_vbus: supplied by vdd_5v_in
+usb3_vbus: supplied by vdd_5v_in
+sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
+sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, ignoring
+tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
+pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0143)
+pcieport 0000:00:01.0: Signaling PME with IRQ 374
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0a10000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+vdd_sata,avdd_plle: disabling
+usb1_vbus: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Beaver
+EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
+EXT4-fs (mmcblk1p1): recovery complete
+EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 1024K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    4.370150] usb 2-1: new high-speed USB device number 2 using tegra-ehci
