Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.227513341 -0700
+++ /tmp/foob	2017-05-05 03:21:11.231513357 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-288888-gb211a48 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:06:37 PDT 2017
+Linux version 4.11.0-next-20170503-288952-g5add469 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:19:09 PDT 2017
 Boot CPU: AArch64 Processor [411fd070]
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
@@ -64,7 +64,6 @@
 Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
 ASID allocator initialised with 65536 entries
-Hierarchical SRCU implementation.
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
 smp: Brought up 1 node, 1 CPU
@@ -115,7 +114,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.736:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.715:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -182,7 +181,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-05-05 10:07:19 UTC (1493978839)
+rtc-pl031 9010000.pl031: setting system clock to 2017-05-05 10:19:54 UTC (1493979594)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.235513373 -0700
+++ /tmp/foob	2017-05-05 03:21:11.239513391 -0700
@@ -42,18 +42,18 @@
 	 ####################
 	 3.2 MiB/s
 done
-Bytes transferred = 7917696 (78d080 hex)
+Bytes transferred = 7916848 (78cd30 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x78d080 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x78cd30 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:02:52 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:15:17 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -96,7 +96,7 @@
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
       .data : 0xc1400000 - 0xc15874f0   (1566 kB)
-       .bss : 0xc1590d10 - 0xc15f7b58   ( 412 kB)
+       .bss : 0xc1590d1c - 0xc15f7b58   ( 412 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -124,7 +124,6 @@
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80300000 - 0x803000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
@@ -318,18 +317,18 @@
  mmcblk0: p1 p2 p3
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
-tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-26 21:38:27 UTC (983223507)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-26 21:50:53 UTC (983224253)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -343,4 +342,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.438995] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.428972] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.247513428 -0700
+++ /tmp/foob	2017-05-05 03:21:11.247513428 -0700
@@ -38,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 ##########################
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6093816 (5cfbf8 hex)
+Bytes transferred = 6092256 (5cf5e0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5cfbf8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5cf5e0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:02:53 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:15:22 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -94,7 +94,7 @@
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
       .data : 0xc0e00000 - 0xc0eb8278   ( 737 kB)
-       .bss : 0xc0ec2658 - 0xc0f0f98c   ( 309 kB)
+       .bss : 0xc0ec2664 - 0xc0f0f98c   ( 309 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -118,7 +118,6 @@
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80100000 - 0x801000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0
 smp: Bringing up secondary CPUs ...
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -285,8 +284,8 @@
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
  mmcblk0: p1 p2 p3
+mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
@@ -321,7 +320,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-26 21:41:08 UTC (983223668)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-26 21:53:41 UTC (983224421)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -337,4 +336,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.659259] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.659364] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.251513445 -0700
+++ /tmp/foob	2017-05-05 03:21:11.255513460 -0700
@@ -37,7 +37,7 @@
 	 ####################
 	 4 MiB/s
 done
-Bytes transferred = 7917696 (78d080 hex)
+Bytes transferred = 7916848 (78cd30 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -48,7 +48,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x78d080 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x78cd30 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:02:52 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:15:17 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -91,7 +91,7 @@
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
       .data : 0xc1400000 - 0xc15874f0   (1566 kB)
-       .bss : 0xc1590d10 - 0xc15f7b58   ( 412 kB)
+       .bss : 0xc1590d1c - 0xc15f7b58   ( 412 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -119,7 +119,6 @@
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80300000 - 0x803000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.259513476 -0700
+++ /tmp/foob	2017-05-05 03:21:11.263513493 -0700
@@ -35,18 +35,18 @@
 	 ##########################
 	 3.9 MiB/s
 done
-Bytes transferred = 6093816 (5cfbf8 hex)
+Bytes transferred = 6092256 (5cf5e0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5cfbf8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5cf5e0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:02:53 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:15:22 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -89,7 +89,7 @@
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
       .data : 0xc0e00000 - 0xc0eb8278   ( 737 kB)
-       .bss : 0xc0ec2658 - 0xc0f0f98c   ( 309 kB)
+       .bss : 0xc0ec2664 - 0xc0f0f98c   ( 309 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -113,7 +113,6 @@
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80100000 - 0x801000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1
 smp: Bringing up secondary CPUs ...
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -442,7 +441,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:09 UTC (946684929)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:35 UTC (946684895)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.267513511 -0700
+++ /tmp/foob	2017-05-05 03:21:11.271513529 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,9 +43,9 @@
 	 #################################################################
 	 #################################################################
 	 ####################
-	 3.5 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 7917696 (78d080 hex)
+Bytes transferred = 7916848 (78cd30 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -56,7 +56,7 @@
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x78d080 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x78cd30 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:02:52 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:15:17 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -100,7 +100,7 @@
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
       .data : 0xc1400000 - 0xc15874f0   (1566 kB)
-       .bss : 0xc1590d10 - 0xc15f7b58   ( 412 kB)
+       .bss : 0xc1590d1c - 0xc15f7b58   ( 412 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -128,7 +128,6 @@
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80300000 - 0x803000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
@@ -297,8 +296,6 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
@@ -315,6 +312,7 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
@@ -327,21 +325,20 @@
 +3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: Switching to 3.3V signalling voltage failed
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
-mmc1: Unknown controller version (3). You may experience problems.
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: Switching to 3.3V signalling voltage failed
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
@@ -349,10 +346,9 @@
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
-elan_i2c 1-0015: invalid report id data (ff)
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:47:51 UTC (946687671)
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 01:00:24 UTC (946688424)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
@@ -369,6 +365,7 @@
 +3.3V_PANEL: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.275513547 -0700
+++ /tmp/foob	2017-05-05 03:21:11.279513564 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,18 +43,18 @@
 	 ##########################
 	 3.5 MiB/s
 done
-Bytes transferred = 6093816 (5cfbf8 hex)
+Bytes transferred = 6092256 (5cf5e0 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5cfbf8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5cf5e0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:02:53 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:15:22 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -98,7 +98,7 @@
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
       .data : 0xc0e00000 - 0xc0eb8278   ( 737 kB)
-       .bss : 0xc0ec2658 - 0xc0f0f98c   ( 309 kB)
+       .bss : 0xc0ec2664 - 0xc0f0f98c   ( 309 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -122,7 +122,6 @@
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80100000 - 0x801000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1
 smp: Bringing up secondary CPUs ...
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -295,12 +294,12 @@
 input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 10
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20170425 abi 9)
@@ -357,7 +356,7 @@
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 input: gpio-keys as /devices/soc0/gpio-keys/input/input3
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:47:13 UTC (946687633)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:59:44 UTC (946688384)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -392,4 +391,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.989500] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# [    2.989524] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.283513580 -0700
+++ /tmp/foob	2017-05-05 03:21:11.287513597 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801202 us
+Bootloader-Cpu Init at (time stamp): 1801251 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801176  us
-Bootloader (AosInit) time: 733515 us
-Bootloader Main Init time: 180243 us
-BlockDevMgrInit time: 157532 us
-PartMgrInit time: 9 us
+Miscellaneous avp time: 1801225  us
+Bootloader (AosInit) time: 733525 us
+Bootloader Main Init time: 180271 us
+BlockDevMgrInit time: 157548 us
+PartMgrInit time: 8 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 77048 us 
-Display init time: 574616 us
-Kernel read time: 390 msec
+Partition Table load: 77151 us 
+Display init time: 574638 us
+Kernel read time: 391 msec
 Load Kernel Size:   16984064 Bytes
-Bl Kernel ReadSpeed: 43548000 Bytes/sec
-Pre-Kernel Jump time: 1792387 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5914401 us
+Bl Kernel ReadSpeed: 43437000 Bytes/sec
+Pre-Kernel Jump time: 1792250 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5915421 us
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-288888-gb211a48 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:06:37 PDT 2017
+Linux version 4.11.0-next-20170503-288952-g5add469 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:19:09 PDT 2017
 Boot CPU: AArch64 Processor [4e0f0000]
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
@@ -136,7 +136,6 @@
 Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
 Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
 ASID allocator initialised with 256 entries
-Hierarchical SRCU implementation.
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
 smp: Brought up 1 node, 1 CPU
@@ -199,7 +198,7 @@
 Freeing initrd memory: 1284K
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.918:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.911:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.291513614 -0700
+++ /tmp/foob	2017-05-05 03:21:11.295513631 -0700
@@ -50,18 +50,18 @@
 	 ####################
 	 4.1 MiB/s
 done
-Bytes transferred = 7917696 (78d080 hex)
+Bytes transferred = 7916848 (78cd30 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4.1 MiB/s
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x78d080 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x78cd30 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:02:52 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:15:17 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -103,7 +103,7 @@
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
       .data : 0xc1400000 - 0xc15874f0   (1566 kB)
-       .bss : 0xc1590d10 - 0xc15f7b58   ( 412 kB)
+       .bss : 0xc1590d1c - 0xc15f7b58   ( 412 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -130,7 +130,6 @@
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x300000 - 0x3000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.299513649 -0700
+++ /tmp/foob	2017-05-05 03:21:11.303513666 -0700
@@ -48,7 +48,7 @@
 	 ##########################
 	 4.1 MiB/s
 done
-Bytes transferred = 6093816 (5cfbf8 hex)
+Bytes transferred = 6092256 (5cf5e0 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5cfbf8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5cf5e0 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:02:53 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:15:22 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -101,7 +101,7 @@
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
       .data : 0xc0e00000 - 0xc0eb8278   ( 737 kB)
-       .bss : 0xc0ec2658 - 0xc0f0f98c   ( 309 kB)
+       .bss : 0xc0ec2664 - 0xc0f0f98c   ( 309 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
@@ -126,7 +126,6 @@
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x100000 - 0x1000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2
 smp: Bringing up secondary CPUs ...
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.307513684 -0700
+++ /tmp/foob	2017-05-05 03:21:11.311513700 -0700
@@ -1,7 +1,7 @@
 [TegraBoot] (version 23.00.2015.14-mobile-1ef66670)
 Processing in cold boot mode Bootloader 2
 A01Q Bootrom Patch rev = 3
-Power-up reason: pmu watchdog
+Power-up reason: on button
 No Battery Present
 Platform has Ddr4 type ram
 max77620 disabling SD1 Remote Sense
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 755356 us
-Basic modules init took 348462 us
-Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14366 us
-Carveout took 252716 us
-CPU initialization took 92307 us
-Total time taken by TegraBoot 707851 us
+Tegraboot started after 745063 us
+Basic modules init took 348440 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 15152 us
+Carveout took 252742 us
+CPU initialization took 92320 us
+Total time taken by TegraBoot 708654 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.594] LPDDR4 Training: Number of tables = 10
+64b[0001.584] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -119,7 +119,7 @@
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
 15663616 bytes read in 811 ms (18.4 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-45142 bytes read in 461 ms (94.7 KiB/s)
+45142 bytes read in 478 ms (91.8 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-288888-gb211a48 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:06:37 PDT 2017
+Linux version 4.11.0-next-20170503-288952-g5add469 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:19:09 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
@@ -211,7 +211,6 @@
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
 ASID allocator initialised with 65536 entries
-Hierarchical SRCU implementation.
 Speedo Revision 4
 Tegra Revision: A01 SKU: 1 CPU Process: -22 SoC Process: -22
 EFI services will not be available.
@@ -268,14 +267,14 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8090d000
+kvm [1]: IDMAP page: 8090c000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.531:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.527:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -356,6 +355,6 @@
 devtmpfs: mounted
 Freeing unused kernel memory: 1088K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in th[    1.368988] random: fast init done
-is shell
+bash: no job contr[    1.343285] random: fast init done
+ol in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.315513716 -0700
+++ /tmp/foob	2017-05-05 03:21:11.319513733 -0700
@@ -1,4 +1,6 @@
-rameters from FDT:
+64 Processor [411fd071]
+Machine model: Google Pixel C
+efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x00000000f5400000
 earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
@@ -75,7 +77,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-288888-gb211a48 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:06:37 PDT 2017
+Linux version 4.11.0-next-20170503-288952-g5add469 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri May 5 03:19:09 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
@@ -162,7 +164,6 @@
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
 ASID allocator initialised with 65536 entries
-Hierarchical SRCU implementation.
 Speedo Revision 4
 Tegra Revision: A02 SKU: 19 CPU Process: 0 SoC Process: 0
 EFI services will not be available.
@@ -226,7 +227,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 1280K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8090d000
+kvm [1]: IDMAP page: 8090c000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -273,11 +274,11 @@
 PP1100_SOC_RTC: Bringing 1000000uV into 850000-850000uV
 max77620-ldo5: supplied by regulator-dummy
 PP2800L_FCAM: Bringing 3100000uV into 2800000-2800000uV
-random: fast init done
 max77620-ldo6: supplied by regulator-dummy
 PP_LDO6: Bringing 2800000uV into 1800000-1800000uV
 max77620-ldo7: supplied by regulator-dummy
 max77620-ldo8: supplied by regulator-dummy
+random: fast init done
 hisi_sas: driver version v1.6
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
@@ -331,16 +332,17 @@
 9pnet: Installing 9P2000 support
 Key type dns_resolver registered
 registered taskstats version 1
+mmc0: new high speed MMC card at address 0001
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-mmc0: new high speed MMC card at address 0001
+max77686-rtc max77620-rtc: setting system clock to 2001-02-13 15:45:30 UTC (982079130)
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-02-13 15:32:56 UTC (982078376)
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -352,7 +354,6 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.323513751 -0700
+++ /tmp/foob	2017-05-05 03:21:11.327513769 -0700
@@ -27,7 +27,6 @@
 Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
 Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'zImage.multi_v7_defconfig'.
@@ -43,18 +42,18 @@
 	 ####################
 	 3.3 MiB/s
 done
-Bytes transferred = 7917696 (78d080 hex)
+Bytes transferred = 7916848 (78cd30 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x78d080 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x78cd30 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -62,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:02:52 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri May 5 03:15:17 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -96,7 +95,7 @@
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
       .data : 0xc1400000 - 0xc15874f0   (1566 kB)
-       .bss : 0xc1590d10 - 0xc15f7b58   ( 412 kB)
+       .bss : 0xc1590d1c - 0xc15f7b58   ( 412 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -123,7 +122,6 @@
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80300000 - 0x803000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
@@ -313,16 +311,16 @@
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-tegra-pcie 3000.pcie-controller: 2x3 configuration
-tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
-tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
  mmcblk0: p1 p2 p3
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -394,5 +392,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.093691] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.104076] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-05-05 03:21:11.331513787 -0700
+++ /tmp/foob	2017-05-05 03:21:11.331513787 -0700
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################
-	 3.3 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6093816 (5cfbf8 hex)
+Bytes transferred = 6092256 (5cf5e0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.3 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5cfbf8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5cf5e0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-next-20170502-170647-gb211a48 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:02:53 PDT 2017
+Linux version 4.11.0-next-20170503-170711-g5add469 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri May 5 03:15:22 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -93,7 +93,7 @@
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
       .data : 0xc0e00000 - 0xc0eb8278   ( 737 kB)
-       .bss : 0xc0ec2658 - 0xc0f0f98c   ( 309 kB)
+       .bss : 0xc0ec2664 - 0xc0f0f98c   ( 309 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -116,7 +116,6 @@
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80100000 - 0x801000a0
-Hierarchical SRCU implementation.
 Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0
 smp: Bringing up secondary CPUs ...
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -387,4 +386,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.350155] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.350159] usb 2-1: new high-speed USB device number 2 using tegra-ehci
