Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.250021545 -0700
+++ /tmp/foob	2017-04-18 01:56:40.254021562 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-284853-gf4fa27cb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Apr 12 22:54:44 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-285468-g495ff9e (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Apr 18 01:54:53 PDT 2017
 Boot CPU: AArch64 Processor [411fd070]
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -29,15 +29,15 @@
 Policy zone: DMA
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
-Memory: 999800K/1048576K available (8828K kernel code, 1086K rwdata, 4232K rodata, 1088K init, 403K bss, 32392K reserved, 16384K cma-reserved)
+Memory: 999796K/1048576K available (8828K kernel code, 1088K rwdata, 4232K rodata, 1088K init, 405K bss, 32396K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff000008920000   (  8832 KB)
     .rodata : 0xffff000008920000 - 0xffff000008d50000   (  4288 KB)
       .init : 0xffff000008d50000 - 0xffff000008e60000   (  1088 KB)
-      .data : 0xffff000008e60000 - 0xffff000008f6fa00   (  1087 KB)
-       .bss : 0xffff000008f6fa00 - 0xffff000008fd47b8   (   404 KB)
+      .data : 0xffff000008e60000 - 0xffff000008f70200   (  1089 KB)
+       .bss : 0xffff000008f70200 - 0xffff000008fd5838   (   406 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -113,7 +113,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.713:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.715:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -125,6 +125,7 @@
 io scheduler noop registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 pl061_gpio 9030000.pl061: PL061 GPIO chip @0x0000000009030000 registered
 OF: PCI: host bridge /pcie@10000000 ranges:
 OF: PCI:    IO 0x3eff0000..0x3effffff -> 0x00000000
@@ -179,7 +180,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-04-13 05:55:30 UTC (1492062930)
+rtc-pl031 9010000.pl031: setting system clock to 2017-04-18 08:55:39 UTC (1492505739)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.298021744 -0700
+++ /tmp/foob	2017-04-18 01:56:40.302021761 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -40,9 +40,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################
-	 3.1 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 7889992 (786448 hex)
+Bytes transferred = 7895400 (787968 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -53,7 +53,7 @@
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x786448 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x787968 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Apr 12 22:50:01 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Apr 18 01:51:00 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,7 +72,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157ea80, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157f4c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993548K/2096128K available (10240K kernel code, 1561K rwdata, 4380K rodata, 2048K init, 407K bss, 37044K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993544K/2096128K available (10240K kernel code, 1564K rwdata, 4380K rodata, 2048K init, 407K bss, 37048K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586628   (1562 kB)
-       .bss : 0xc158fd10 - 0xc15f5b08   ( 408 kB)
+      .data : 0xc1400000 - 0xc1587068   (1565 kB)
+       .bss : 0xc1590d1c - 0xc15f6b08   ( 408 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -180,10 +180,13 @@
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 SMPS3: supplied by vdd-ao
 SMPS457: supplied by vdd-sys-3v3
+SMPS6: supplied by regulator-dummy
 SMPS8: supplied by vdd-sys-3v3
 random: fast init done
 SMPS9: supplied by vdd-sys-3v3
 sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV
+SMPS10_OUT2: supplied by regulator-dummy
+SMPS10_OUT1: supplied by regulator-dummy
 LDO1: supplied by vdd-sys-3v3
 LDO2: supplied by vdd-sys-3v3
 LDO3: supplied by vddio-1v8
@@ -226,6 +229,7 @@
 io scheduler deadline registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -324,7 +328,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-04 17:26:56 UTC (981307616)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-09 20:27:58 UTC (981750478)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -338,4 +342,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.419646] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.438939] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.314021811 -0700
+++ /tmp/foob	2017-04-18 01:56:40.314021811 -0700
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 ########################
-	 2.8 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 6066320 (5c9090 hex)
+Bytes transferred = 6072080 (5ca710 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5c9090 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ca710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Apr 12 22:49:33 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Apr 18 01:50:23 PDT 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -70,7 +70,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead800, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eae180, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998564K/2096128K available (9216K kernel code, 735K rwdata, 2688K rodata, 1024K init, 307K bss, 32028K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998560K/2096128K available (9216K kernel code, 737K rwdata, 2688K rodata, 1024K init, 307K bss, 32032K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7d30   ( 736 kB)
-       .bss : 0xc0ec1664 - 0xc0f0e434   ( 308 kB)
+      .data : 0xc0e00000 - 0xc0eb86b0   ( 738 kB)
+       .bss : 0xc0ec267c - 0xc0f0f434   ( 308 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -171,10 +171,13 @@
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 SMPS3: supplied by vdd-ao
 SMPS457: supplied by vdd-sys-3v3
+SMPS6: supplied by regulator-dummy
 SMPS8: supplied by vdd-sys-3v3
 random: fast init done
 SMPS9: supplied by vdd-sys-3v3
 sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV
+SMPS10_OUT2: supplied by regulator-dummy
+SMPS10_OUT1: supplied by regulator-dummy
 LDO1: supplied by vdd-sys-3v3
 LDO2: supplied by vdd-sys-3v3
 LDO3: supplied by vddio-1v8
@@ -220,6 +223,7 @@
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -316,7 +320,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-04 17:24:21 UTC (981307461)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2001-02-09 20:25:16 UTC (981750316)
 vdd_hdmi_5v0: disabling
 dvdd_ts: disabling
 usb1_vbus: disabling
@@ -332,4 +336,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.647907] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.680711] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.322021844 -0700
+++ /tmp/foob	2017-04-18 01:56:40.326021860 -0700
@@ -37,18 +37,18 @@
 	 ##################
 	 3.9 MiB/s
 done
-Bytes transferred = 7889992 (786448 hex)
+Bytes transferred = 7895400 (787968 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x786448 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x787968 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Apr 12 22:50:01 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Apr 18 01:51:00 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -67,7 +67,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157ea80, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157f4c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -80,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993428K/2096128K available (10240K kernel code, 1561K rwdata, 4380K rodata, 2048K init, 407K bss, 37164K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993424K/2096128K available (10240K kernel code, 1564K rwdata, 4380K rodata, 2048K init, 407K bss, 37168K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,8 +90,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586628   (1562 kB)
-       .bss : 0xc158fd10 - 0xc15f5b08   ( 408 kB)
+      .data : 0xc1400000 - 0xc1587068   (1565 kB)
+       .bss : 0xc1590d1c - 0xc15f6b08   ( 408 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -191,6 +191,7 @@
 io scheduler deadline registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
 tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
@@ -314,17 +315,17 @@
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
- usb2-1: usb2-1 supply vbus not found, using dummy regulator
- usb3-0: usb3-0 supply vbus not found, using dummy regulator
 mmc0: new high speed MMC card at address 0001
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
  mmcblk0: p1
+ usb2-1: usb2-1 supply vbus not found, using dummy regulator
+ usb3-0: usb3-0 supply vbus not found, using dummy regulator
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
@@ -374,8 +375,8 @@
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
-ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
@@ -435,7 +436,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:30 UTC (946684950)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:11 UTC (946684931)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.330021877 -0700
+++ /tmp/foob	2017-04-18 01:56:40.334021893 -0700
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ########################
-	 3.7 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6066320 (5c9090 hex)
+Bytes transferred = 6072080 (5ca710 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.8 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5c9090 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ca710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Apr 12 22:49:33 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Apr 18 01:50:23 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -65,7 +65,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead800, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eae180, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -78,7 +78,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998444K/2096128K available (9216K kernel code, 735K rwdata, 2688K rodata, 1024K init, 307K bss, 32148K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998440K/2096128K available (9216K kernel code, 737K rwdata, 2688K rodata, 1024K init, 307K bss, 32152K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,8 +88,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7d30   ( 736 kB)
-       .bss : 0xc0ec1664 - 0xc0f0e434   ( 308 kB)
+      .data : 0xc0e00000 - 0xc0eb86b0   ( 738 kB)
+       .bss : 0xc0ec267c - 0xc0f0f434   ( 308 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -185,6 +185,7 @@
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
 tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
@@ -440,7 +441,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:16 UTC (946684816)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +USB0_VBUS_SW: disabling
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.358021993 -0700
+++ /tmp/foob	2017-04-18 01:56:40.358021993 -0700
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -43,20 +43,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################
-	 3.4 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 7889992 (786448 hex)
+Bytes transferred = 7895400 (787968 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x786448 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x787968 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Apr 12 22:50:01 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Apr 18 01:51:00 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c157ea80, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157f4c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -89,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994444K/2097148K available (10240K kernel code, 1561K rwdata, 4380K rodata, 2048K init, 407K bss, 37168K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994440K/2097148K available (10240K kernel code, 1564K rwdata, 4380K rodata, 2048K init, 407K bss, 37172K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,8 +99,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586628   (1562 kB)
-       .bss : 0xc158fd10 - 0xc15f5b08   ( 408 kB)
+      .data : 0xc1400000 - 0xc1587068   (1565 kB)
+       .bss : 0xc1590d1c - 0xc15f6b08   ( 408 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -203,6 +203,7 @@
 io scheduler deadline registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
@@ -329,22 +330,22 @@
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 tegra-sor 54540000.sor: failed to probe output: -517
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
 panel-simple panel: panel supply power not found, using dummy regulator
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+mmc0: new high speed MMC card at address 0001
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmc1: Switching to 3.3V signalling voltage failed
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+elan_i2c 1-0015: invalid report id data (ff)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.366022026 -0700
+++ /tmp/foob	2017-04-18 01:56:40.366022026 -0700
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ########################
-	 3.5 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 6066320 (5c9090 hex)
+Bytes transferred = 6072080 (5ca710 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5c9090 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5ca710 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -63,7 +63,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Apr 12 22:49:33 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Apr 18 01:50:23 PDT 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,7 +74,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0ead800, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eae180, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -87,7 +87,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999460K/2097148K available (9216K kernel code, 735K rwdata, 2688K rodata, 1024K init, 307K bss, 32152K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999456K/2097148K available (9216K kernel code, 737K rwdata, 2688K rodata, 1024K init, 307K bss, 32156K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -97,8 +97,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7d30   ( 736 kB)
-       .bss : 0xc0ec1664 - 0xc0f0e434   ( 308 kB)
+      .data : 0xc0e00000 - 0xc0eb86b0   ( 738 kB)
+       .bss : 0xc0ec267c - 0xc0f0f434   ( 308 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -197,6 +197,7 @@
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
@@ -289,9 +290,9 @@
 tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
@@ -363,16 +364,17 @@
 +2.8V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
 +VDD_LED: disabling
 +5V_VDD_TS_SW: disabling
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
 +3.3V_PANEL: disabling
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +5V_HDMI_CON: disabling
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -381,7 +383,6 @@
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
@@ -391,4 +392,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.090702] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# [    3.110883] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.386022109 -0700
+++ /tmp/foob	2017-04-18 01:56:40.390022126 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800686 us
+Bootloader-Cpu Init at (time stamp): 1800694 us
 
 Pinmux changes applied in kernel way
 
@@ -62,20 +62,20 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800660  us
-Bootloader (AosInit) time: 733467 us
-Bootloader Main Init time: 180251 us
-BlockDevMgrInit time: 157492 us
+Miscellaneous avp time: 1800668  us
+Bootloader (AosInit) time: 733459 us
+Bootloader Main Init time: 180244 us
+BlockDevMgrInit time: 157502 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77090 us 
-Display init time: 574743 us
+Partition Table load: 77123 us 
+Display init time: 574530 us
 Kernel read time: 378 msec
 Load Kernel Size:   16304128 Bytes
 Bl Kernel ReadSpeed: 43132000 Bytes/sec
-Pre-Kernel Jump time: 1740553 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5844630 us
+Pre-Kernel Jump time: 1740833 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5844912 us
 Booting Linux on physical CPU 0x0
 Linux version 4.8.0-239303-g3477d16 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Oct 7 01:12:37 PDT 2016
 Boot CPU: AArch64 Processor [4e0f0000]
@@ -184,7 +184,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(1.131:1): initialized
+audit: type=2000 audit(1.155:1): initialized
 workingset: timestamp_bits=46 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -251,10 +251,9 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 +VDD_LED: supplied by +VDD_MUX
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
@@ -273,6 +272,9 @@
 Freeing unused kernel memory: 960K (ffff800000c00000 - ffff800000cf0000)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.394022142 -0700
+++ /tmp/foob	2017-04-18 01:56:40.398022159 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,9 +48,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################
-	 2.7 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 7889992 (786448 hex)
+Bytes transferred = 7895400 (787968 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -61,7 +61,7 @@
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x786448 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x787968 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Apr 12 22:50:01 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Apr 18 01:51:00 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -79,7 +79,7 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c157ea80, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c157f4c0, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -92,7 +92,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954376K/1048576K available (10240K kernel code, 1561K rwdata, 4380K rodata, 2048K init, 407K bss, 28664K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 954372K/1048576K available (10240K kernel code, 1564K rwdata, 4380K rodata, 2048K init, 407K bss, 28668K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -102,8 +102,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586628   (1562 kB)
-       .bss : 0xc158fd10 - 0xc15f5b08   ( 408 kB)
+      .data : 0xc1400000 - 0xc1587068   (1565 kB)
+       .bss : 0xc1590d1c - 0xc15f6b08   ( 408 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -189,6 +189,7 @@
 io scheduler deadline registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra-pcie 80003000.pcie-controller: dual-mode configuration
 tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
@@ -344,8 +345,8 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-hub 1-1:1.0: USB hub found
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
+hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
 Waiting for root device PARTUUID=11eb23c1-01...
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.414022225 -0700
+++ /tmp/foob	2017-04-18 01:56:40.418022242 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -46,20 +46,20 @@
 	 #################################################################
 	 #################################################################
 	 ########################
-	 3.8 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 6066320 (5c9090 hex)
+Bytes transferred = 6072080 (5ca710 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5c9090 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ca710 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -68,7 +68,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Apr 12 22:49:33 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Apr 18 01:50:23 PDT 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -77,7 +77,7 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0ead800, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0eae180, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -90,7 +90,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959392K/1048576K available (9216K kernel code, 735K rwdata, 2688K rodata, 1024K init, 307K bss, 23648K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959388K/1048576K available (9216K kernel code, 737K rwdata, 2688K rodata, 1024K init, 307K bss, 23652K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -100,8 +100,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7d30   ( 736 kB)
-       .bss : 0xc0ec1664 - 0xc0f0e434   ( 308 kB)
+      .data : 0xc0e00000 - 0xc0eb86b0   ( 738 kB)
+       .bss : 0xc0ec267c - 0xc0f0f434   ( 308 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
@@ -185,6 +185,7 @@
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra-pcie 80003000.pcie-controller: dual-mode configuration
 tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
@@ -329,8 +330,8 @@
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
  mmcblk1: p1 p2
+tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.438022325 -0700
+++ /tmp/foob	2017-04-18 01:56:40.442022341 -0700
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 750988 us
-Basic modules init took 348535 us
-Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14382 us
-Carveout took 252715 us
-CPU initialization took 92320 us
-Total time taken by TegraBoot 707952 us
+Tegraboot started after 724455 us
+Basic modules init took 350455 us
+Sec Bootdevice Read Time = 204 ms, Read Size = 8459 KB
+Next stage binary read took 15919 us
+Carveout took 252731 us
+CPU initialization took 92339 us
+Total time taken by TegraBoot 711444 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.589] LPDDR4 Training: Number of tables = 10
+64b[0001.567] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-15661568 bytes read in 811 ms (18.4 MiB/s)
+15663616 bytes read in 811 ms (18.4 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-45142 bytes read in 459 ms (95.7 KiB/s)
+45142 bytes read in 460 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-284853-gf4fa27cb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Apr 12 22:54:44 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-285468-g495ff9e (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Apr 18 01:54:53 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -174,15 +174,15 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2983372K/3131392K available (8828K kernel code, 1086K rwdata, 4232K rodata, 1088K init, 403K bss, 131636K reserved, 16384K cma-reserved)
+Memory: 2983368K/3131392K available (8828K kernel code, 1088K rwdata, 4232K rodata, 1088K init, 405K bss, 131640K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff000008920000   (  8832 KB)
     .rodata : 0xffff000008920000 - 0xffff000008d50000   (  4288 KB)
       .init : 0xffff000008d50000 - 0xffff000008e60000   (  1088 KB)
-      .data : 0xffff000008e60000 - 0xffff000008f6fa00   (  1087 KB)
-       .bss : 0xffff000008f6fa00 - 0xffff000008fd47b8   (   404 KB)
+      .data : 0xffff000008e60000 - 0xffff000008f70200   (  1089 KB)
+       .bss : 0xffff000008f70200 - 0xffff000008fd5838   (   406 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -266,14 +266,14 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8090d000
+kvm [1]: IDMAP page: 8090f000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.531:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.499:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -285,6 +285,7 @@
 io scheduler noop registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 xenfs: not registering filesystem on non-xen platform
@@ -353,6 +354,6 @@
 devtmpfs: mounted
 Freeing unused kernel memory: 1088K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job contr[    1.367051] random: fast init done
+bash: no job contr[    1.358721] random: fast init done
 ol in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.446022358 -0700
+++ /tmp/foob	2017-04-18 01:56:40.450022374 -0700
@@ -1,78 +1,5 @@
-5200n8')
-bootconsole [uart0] enabled
-NUMA: No NUMA configuration found
-NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
-NUMA: Adding memblock [0x80000000 - 0xf65fffff] on node 0
-NUMA: Adding memblock [0x100000000 - 0x13fffffff] on node 0
-NUMA: Initmem setup node 0 [mem 0x80000000-0x13fffffff]
-NUMA: NODE_DATA [mem 0x13ffa0d00-0x13ffa27ff]
-Zone ranges:
-  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
-  Normal   [mem 0x0000000100000000-0x000000013fffffff]
-Movable zone start for each node
-Early memory node ranges
-  node   0: [mem 0x0000000080000000-0x00000000f65fffff]
-  node   0: [mem 0x0000000100000000-0x000000013fffffff]
-Initmem setup node 0 [mem 0x0000000080000000-0x000000013fffffff]
-psci: probing for conduit method from DT.
-psci: PSCIv1.0 detected in firmware.
-psci: Using standard PSCI v0.2 function IDs
-psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
-percpu: Embedded 24 pages/cpu @ffff8000bff3d000 s58624 r8192 d31488 u98304
-Detected PIPT I-cache on CPU0
-CPU features: enabling workaround for ARM erratum 832075
-CPU features: enabling workaround for ARM erratum 834220
-Built 1 zonelists in Node order, mobility grouping on.  Total pages: 735336
-Policy zone: Normal
-Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
-PID hash table entries: 4096 (order: 3, 32768 bytes)
-software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2837556K/2988032K available (8828K kernel code, 1086K rwdata, 4232K rodata, 1088K init, 403K bss, 134092K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
-    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
-      .text : 0xffff000008080000 - 0xffff000008920000   (  8832 KB)
-    .rodata : 0xffff000008920000 - 0xffff000008d50000   (  4288 KB)
-      .init : 0xffff000008d50000 - 0xffff000008e60000   (  1088 KB)
-      .data : 0xffff000008e60000 - 0xffff000008f6fa00   (  1087 KB)
-       .bss : 0xffff000008f6fa00 - 0xffff000008fd47b8   (   404 KB)
-    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
-    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
-    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
-              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
-    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
-SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
-Preemptible hierarchical RCU implementation.
-	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
-NR_IRQS:64 nr_irqs:64 0
-GIC: Using split EOI/Deactivate mode
-/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000
-boot misc0 0x0: expected 0x80000
- (comparison mask = 0x400ffffb)
-boot misc2 0x1f720005: expected 0x1f720f05
- (comparison mask = 0xffffff17)
-PLL_C already enabled. Postponing set full defaults
-PLL_DP already enabled. Postponing set full defaults
-boot misc0 0x0: expected 0x20
- (comparison mask = 0x7ffffff)
-boot misc1 0x90000000: expected 0xc0000000
- (comparison mask = 0xf8000000)
-boot misc2 0x0: expected 0xf400f0da
- (comparison mask = 0xffffffff)
-boot misc3 0x8c7: expected 0x2004f400
- (comparison mask = 0xffffffff)
-boot misc1 0x0: expected 0x20
- (comparison mask = 0xffffff)
-PLL_X already enabled. Postponing set full defaults
-arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
-clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
-sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
-Console: colour dummy device 80x25
-console [tty0] enabled
-bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-284853-gf4fa27cb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Apr 12 22:54:44 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-285468-g495ff9e (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Apr 18 01:54:53 PDT 2017
 Boot CPU: AArch64 Processor [411fd071]
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -106,15 +33,15 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2837556K/2988032K available (8828K kernel code, 1086K rwdata, 4232K rodata, 1088K init, 403K bss, 134092K reserved, 16384K cma-reserved)
+Memory: 2837556K/2988032K available (8828K kernel code, 1088K rwdata, 4232K rodata, 1088K init, 405K bss, 134092K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff000008920000   (  8832 KB)
     .rodata : 0xffff000008920000 - 0xffff000008d50000   (  4288 KB)
       .init : 0xffff000008d50000 - 0xffff000008e60000   (  1088 KB)
-      .data : 0xffff000008e60000 - 0xffff000008f6fa00   (  1087 KB)
-       .bss : 0xffff000008f6fa00 - 0xffff000008fd47b8   (   404 KB)
+      .data : 0xffff000008e60000 - 0xffff000008f70200   (  1089 KB)
+       .bss : 0xffff000008f70200 - 0xffff000008fd5838   (   406 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -219,9 +146,9 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 Unpacking initramfs...
-Freeing initrd memory: 2364K
+Freeing initrd memory: 2360K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8090d000
+kvm [1]: IDMAP page: 8090f000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -240,6 +167,7 @@
 io scheduler noop registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
@@ -253,12 +181,25 @@
 loop: module loaded
 cros-ec-i2c 0-001e: Chrome EC device registered
 max77620 1-003c: PMIC Version OTP:0x35 and ES:0x8
+max77620-sd0: supplied by regulator-dummy
+max77620-sd1: supplied by regulator-dummy
+max77620-sd2: supplied by regulator-dummy
+max77620-sd3: supplied by regulator-dummy
+max77620-ldo0: supplied by regulator-dummy
+max77620-ldo1: supplied by regulator-dummy
 PP1200_RCAM: Bringing 1050000uV into 1200000-1200000uV
+max77620-ldo2: supplied by regulator-dummy
+max77620-ldo3: supplied by regulator-dummy
 PP2800L_RCAM: Bringing 3100000uV into 2800000-2800000uV
+max77620-ldo4: supplied by regulator-dummy
 PP1100_SOC_RTC: Bringing 1000000uV into 850000-850000uV
+max77620-ldo5: supplied by regulator-dummy
 PP2800L_FCAM: Bringing 3100000uV into 2800000-2800000uV
 random: fast init done
+max77620-ldo6: supplied by regulator-dummy
 PP_LDO6: Bringing 2800000uV into 1800000-1800000uV
+max77620-ldo7: supplied by regulator-dummy
+max77620-ldo8: supplied by regulator-dummy
 hisi_sas: driver version v1.6
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
@@ -312,16 +253,17 @@
 9pnet: Installing 9P2000 support
 Key type dns_resolver registered
 registered taskstats version 1
+mmc0: new high speed MMC card at address 0001
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-mmc0: new high speed MMC card at address 0001
+max77686-rtc max77620-rtc: setting system clock to 2001-01-27 14:21:38 UTC (980605298)
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-01-22 11:21:33 UTC (980162493)
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -333,7 +275,6 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.454022391 -0700
+++ /tmp/foob	2017-04-18 01:56:40.458022407 -0700
@@ -40,20 +40,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 7889992 (786448 hex)
+Bytes transferred = 7895400 (787968 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x786448 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x787968 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Apr 12 22:50:01 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Apr 18 01:51:00 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -71,7 +71,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c157ea80, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c157f4c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993468K/2096128K available (10240K kernel code, 1561K rwdata, 4380K rodata, 2048K init, 407K bss, 37124K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993464K/2096128K available (10240K kernel code, 1564K rwdata, 4380K rodata, 2048K init, 407K bss, 37128K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1586628   (1562 kB)
-       .bss : 0xc158fd10 - 0xc15f5b08   ( 408 kB)
+      .data : 0xc1400000 - 0xc1587068   (1565 kB)
+       .bss : 0xc1590d1c - 0xc15f6b08   ( 408 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -205,6 +205,7 @@
 io scheduler deadline registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
@@ -306,20 +307,20 @@
 usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-tegra-pcie 3000.pcie-controller: 2x3 configuration
 mmc1: new high speed MMC card at address 0001
-tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 Primary GPT is invalid, using alternate GPT.
-tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
  mmcblk1: p1 p2 p3 p4 p5
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -391,5 +392,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.084093] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.103640] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-04-18 01:56:40.466022441 -0700
+++ /tmp/foob	2017-04-18 01:56:40.466022441 -0700
@@ -38,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 ########################
-	 3.1 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6066320 (5c9090 hex)
+Bytes transferred = 6072080 (5ca710 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5c9090 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ca710 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc6-next-20170413-166612-gf4fa27cb (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Apr 12 22:49:33 PDT 2017
+Linux version 4.11.0-rc7-next-20170418-167227-g495ff9e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Apr 18 01:50:23 PDT 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,7 +69,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ead800, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0eae180, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998484K/2096128K available (9216K kernel code, 735K rwdata, 2688K rodata, 1024K init, 307K bss, 32108K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998480K/2096128K available (9216K kernel code, 737K rwdata, 2688K rodata, 1024K init, 307K bss, 32112K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,8 +92,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
       .init : 0xc0d00000 - 0xc0e00000   (1024 kB)
-      .data : 0xc0e00000 - 0xc0eb7d30   ( 736 kB)
-       .bss : 0xc0ec1664 - 0xc0f0e434   ( 308 kB)
+      .data : 0xc0e00000 - 0xc0eb86b0   ( 738 kB)
+       .bss : 0xc0ec267c - 0xc0f0f434   ( 308 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
@@ -199,6 +199,7 @@
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 io scheduler mq-deadline registered
+io scheduler kyber registered
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
@@ -385,4 +386,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.380135] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.380031] usb 2-1: new high-speed USB device number 2 using tegra-ehci
