U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################## 3.5 MiB/s done Bytes transferred = 7883456 (784ac0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 68155 (10a3b hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x784ac0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a3a Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.0-rc6-next-20170410-165724-gf8c97bd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Apr 10 01:21:22 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c157e380, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @eef81000 s38592 r8192 d22848 u69632 [ 0.000000] pcpu-alloc: s38592 r8192 d22848 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994448K/2097148K available (10240K kernel code, 1559K rwdata, 4376K rodata, 2048K init, 407K bss, 37164K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1585f28 (1560 kB) [ 0.000000] .bss : 0xc158ed1c - 0xc15f4a08 ( 408 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001875] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001882] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001889] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001893] Switching to timer-based delay loop, resolution 83ns [ 0.002105] Console: colour dummy device 80x30 [ 0.002119] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002127] pid_max: default: 32768 minimum: 301 [ 0.002165] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002171] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002372] CPU: Testing write buffer coherency: ok [ 0.002491] /cpus/cpu@0 missing clock-frequency property [ 0.002507] /cpus/cpu@1 missing clock-frequency property [ 0.002521] /cpus/cpu@2 missing clock-frequency property [ 0.002536] /cpus/cpu@3 missing clock-frequency property [ 0.002542] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002657] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.004034] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004299] EFI services will not be available. [ 0.004389] smp: Bringing up secondary CPUs ... [ 0.004634] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011988] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021993] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031764] smp: Brought up 1 node, 4 CPUs [ 0.031772] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031776] CPU: All CPU(s) started in SVC mode. [ 0.032317] devtmpfs: initialized [ 0.037951] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038142] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038150] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.038716] pinctrl core: initialized pinctrl subsystem [ 0.039473] NET: Registered protocol family 16 [ 0.040227] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041108] cpuidle: using governor menu [ 0.050114] No ATAGs? [ 0.050167] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.050173] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.052993] Serial: AMBA PL011 UART driver [ 0.053341] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.058600] AT91: Could not find identification node [ 0.058795] +5V_SYS: supplied by +VDD_MUX [ 0.058894] +3.3V_SYS: supplied by +VDD_MUX [ 0.059097] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.059103] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.059135] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.059139] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.059169] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.059173] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.059203] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.059207] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.059284] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.059289] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.059318] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.059322] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.060306] vgaarb: loaded [ 0.060578] SCSI subsystem initialized [ 0.060644] libata version 3.00 loaded. [ 0.060729] usbcore: registered new interface driver usbfs [ 0.060751] usbcore: registered new interface driver hub [ 0.060774] usbcore: registered new device driver usb [ 0.062072] pps_core: LinuxPPS API ver. 1 registered [ 0.062076] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.062085] PTP clock support registered [ 0.062150] EDAC MC: Ver: 3.0.0 [ 0.062545] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.062554] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062984] clocksource: Switched to clocksource arch_sys_counter [ 0.082744] NET: Registered protocol family 2 [ 0.082946] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.082995] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.083058] TCP: Hash tables configured (established 8192 bind 8192) [ 0.083095] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.083111] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.083174] NET: Registered protocol family 1 [ 0.083318] RPC: Registered named UNIX socket transport module. [ 0.083322] RPC: Registered udp transport module. [ 0.083325] RPC: Registered tcp transport module. [ 0.083329] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.083334] PCI: CLS 0 bytes, default 64 [ 0.083886] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.084576] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.087413] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.087658] NFS: Registering the id_resolver key type [ 0.087669] Key type id_resolver registered [ 0.087672] Key type id_legacy registered [ 0.087690] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.088244] bounce: pool size: 64 pages [ 0.088263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.088267] io scheduler noop registered [ 0.088270] io scheduler deadline registered [ 0.088329] io scheduler cfq registered (default) [ 0.088333] io scheduler mq-deadline registered [ 0.090113] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.099566] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.100477] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.118837] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.119869] console [ttyS0] disabled [ 0.119888] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.004095] console [ttyS0] enabled [ 1.007863] SuperH (H)SCI(F) driver initialized [ 1.012706] msm_serial: driver initialized [ 1.016859] STMicroelectronics ASC driver initialized [ 1.023840] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.030360] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.037738] panel-simple panel: panel supply power not found, using dummy regulator [ 1.048936] brd: module loaded [ 1.054684] loop: module loaded [ 1.058733] as3722 4-0040: AS3722 with revision 0x1 found [ 1.068728] as3722-sd2: supplied by +5V_SYS [ 1.073157] as3722-sd3: supplied by +5V_SYS [ 1.077483] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.083707] as3722-sd4: supplied by +5V_SYS [ 1.088037] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.093782] as3722-sd5: supplied by +5V_SYS [ 1.099348] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.105069] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.111075] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.116701] as3722-ldo3: supplied by +3.3V_SYS [ 1.121145] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.128715] as3722-ldo4: supplied by +3.3V_SYS [ 1.133314] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.139310] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.144083] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.150755] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.156782] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.161545] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.168086] as3722-ldo9: supplied by +5V_SYS [ 1.172644] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.178839] as3722-ldo10: supplied by +5V_SYS [ 1.183354] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.189778] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.202121] random: fast init done [ 1.208027] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.214110] libphy: Fixed MDIO Bus: probed [ 1.218578] CAN device driver interface [ 1.222705] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.228810] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.234632] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.240554] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.247503] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.254256] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.261653] usbcore: registered new interface driver pegasus [ 1.267321] usbcore: registered new interface driver asix [ 1.272716] usbcore: registered new interface driver ax88179_178a [ 1.278813] usbcore: registered new interface driver cdc_ether [ 1.284652] usbcore: registered new interface driver smsc75xx [ 1.290400] usbcore: registered new interface driver smsc95xx [ 1.296147] usbcore: registered new interface driver net1080 [ 1.301801] usbcore: registered new interface driver cdc_subset [ 1.307720] usbcore: registered new interface driver zaurus [ 1.313301] usbcore: registered new interface driver cdc_ncm [ 1.319587] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.326103] ehci-pci: EHCI PCI platform driver [ 1.330545] ehci-platform: EHCI generic platform driver [ 1.335836] ehci-orion: EHCI orion driver [ 1.339886] SPEAr-ehci: EHCI SPEAr driver [ 1.343935] ehci-st: EHCI STMicroelectronics driver [ 1.348844] ehci-exynos: EHCI EXYNOS driver [ 1.353072] ehci-atmel: EHCI Atmel driver [ 1.357113] tegra-ehci: Tegra EHCI driver [ 1.361168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.367342] ohci-pci: OHCI PCI platform driver [ 1.371786] ohci-platform: OHCI generic platform driver [ 1.377055] ohci-omap3: OHCI OMAP3 driver [ 1.381096] SPEAr-ohci: OHCI SPEAr driver [ 1.385148] ohci-st: OHCI STMicroelectronics driver [ 1.390058] ohci-atmel: OHCI Atmel driver [ 1.394312] usbcore: registered new interface driver usb-storage [ 1.401073] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.408442] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.415314] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.422196] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.429334] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.435680] i2c /dev entries driver [ 1.441488] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.452800] sdhci: Secure Digital Host Controller Interface driver [ 1.458980] sdhci: Copyright(c) Pierre Ossman [ 1.463856] Synopsys Designware Multimedia Card Interface Driver [ 1.470278] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.476198] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.489987] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.494871] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.515109] mmc0: Unknown controller version (3). You may experience problems. [ 1.522342] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.579452] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.589392] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.592996] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.604972] ledtrig-cpu: registered to indicate activity on CPUs [ 1.611077] usbcore: registered new interface driver usbhid [ 1.616644] usbhid: USB HID core driver [ 1.621812] NET: Registered protocol family 10 [ 1.626564] Segment Routing with IPv6 [ 1.630234] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.636363] NET: Registered protocol family 17 [ 1.640796] can: controller area network core (rev 20120528 abi 9) [ 1.646988] NET: Registered protocol family 29 [ 1.651418] can: raw protocol (rev 20120528) [ 1.655681] can: broadcast manager protocol (rev 20161123 t) [ 1.661326] can: netlink gateway (rev 20130117) max_hops=1 [ 1.661579] mmc0: new high speed MMC card at address 0001 [ 1.661802] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.661903] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.662022] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.662112] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.669585] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.700028] Key type dns_resolver registered [ 1.704500] ThumbEE CPU extension supported. [ 1.708760] Registering SWP/SWPB emulation handler [ 1.718537] +3.3V_RUN: supplied by +3.3V_SYS [ 1.723566] +VDD_LED: supplied by +VDD_MUX [ 1.727736] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.733412] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.738054] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.742685] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.748017] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.752634] +5V_USB_HS: supplied by +5V_SYS [ 1.757163] +5V_USB_SS: supplied by +5V_SYS [ 1.761901] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.767459] +3.3V_LP0: supplied by +3.3V_SYS [ 1.772343] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.772648] elan_i2c 1-0015: failed to read report data: -121 [ 1.784099] +5V_HDMI_CON: supplied by +5V_SYS [ 1.789077] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.795817] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.805837] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.812332] panel-simple panel: panel supply power not found, using dummy regulator [ 1.820658] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.833185] mmc1: Unknown controller version (3). You may experience problems. [ 1.840425] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.846718] mmc1: Switching to 3.3V signalling voltage failed [ 1.903068] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.910313] elan_i2c 1-0015: invalid report id data (ff) [ 1.916489] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.921358] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.934765] mmc2: Unknown controller version (3). You may experience problems. [ 1.942061] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.973752] mmc1: new high speed SDIO card at address 0001 [ 2.013094] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.026339] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.033964] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.042908] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.047475] +1.05V_RUN: disabling [ 2.050946] +1.8V_RUN_CAM: disabling [ 2.054778] +3.3V_RUN_CAM: disabling [ 2.058512] +1.2V_RUN_CAM_FRONT: disabling [ 2.062768] +1.05V_RUN_CAM_REAR: disabling [ 2.068028] +2.8V_RUN_TOUCH: disabling [ 2.073095] +2.8V_RUN_CAM_AF: disabling [ 2.077144] +1.8V_RUN_VPP_FUSE: disabling [ 2.081355] +VDD_LED: disabling [ 2.084531] +5V_VDD_TS_SW: disabling [ 2.088107] +5V_USB_HS: disabling [ 2.091413] +5V_USB_SS: disabling [ 2.094761] +3.3V_PANEL: disabling [ 2.098160] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.102680] +5V_HDMI_CON: disabling [ 2.107083] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.115740] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.159818] EXT4-fs (mmcblk0p3): recovery complete [ 2.164660] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.172759] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.180069] devtmpfs: mounted [ 2.183824] Freeing unused kernel memory: 2048K [ 2.204951] mmc2: new high speed SDHC card at address 0007 [ 2.210715] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.225568] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.231743] GPT:3014591 != 15564799 [ 2.235251] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.242636] GPT:3014591 != 15564799 [ 2.246141] GPT: Use GNU Parted to correct GPT errors. [ 2.251297] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#