U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 4 MiB/s done Bytes transferred = 7509352 (729568 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.8 MiB/s done Bytes transferred = 67133 (1063d hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x729568 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8301363c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.0-rc1-next-20170308-157162-g56b8bad (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Mar 7 18:49:20 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c1539800, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 16 pages/cpu @eef86000 s34368 r8192 d22976 u65536 [ 0.000000] pcpu-alloc: s34368 r8192 d22976 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993776K/2096128K available (10240K kernel code, 1260K rwdata, 4224K rodata, 2048K init, 407K bss, 36816K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc153b160 (1261 kB) [ 0.000000] .bss : 0xc153d000 - 0xc15a2cb8 ( 408 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000034] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000050] Switching to timer-based delay loop, resolution 1000ns [ 0.005576] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005596] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005616] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005631] Switching to timer-based delay loop, resolution 83ns [ 0.006091] Console: colour dummy device 80x30 [ 0.006121] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.006140] pid_max: default: 32768 minimum: 301 [ 0.006250] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006266] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006732] CPU: Testing write buffer coherency: ok [ 0.006980] /cpus/cpu@0 missing clock-frequency property [ 0.007024] /cpus/cpu@1 missing clock-frequency property [ 0.007067] /cpus/cpu@2 missing clock-frequency property [ 0.007112] /cpus/cpu@3 missing clock-frequency property [ 0.007126] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007330] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.011203] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.011880] EFI services will not be available. [ 0.012124] smp: Bringing up secondary CPUs ... [ 0.012637] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015715] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.025723] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035250] smp: Brought up 1 node, 4 CPUs [ 0.035272] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.035282] CPU: All CPU(s) started in SVC mode. [ 0.036763] devtmpfs: initialized [ 0.052616] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.053012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.053031] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.054464] pinctrl core: initialized pinctrl subsystem [ 0.056396] NET: Registered protocol family 16 [ 0.058464] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.060930] cpuidle: using governor menu [ 0.087687] No ATAGs? [ 0.087818] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.087836] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.094403] Serial: AMBA PL011 UART driver [ 0.110601] AT91: Could not find identification node [ 0.111139] +5V_SYS: supplied by +VDD_MUX [ 0.111408] +3.3V_SYS: supplied by +VDD_MUX [ 0.111995] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.112012] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.112101] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.112116] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.112283] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.112297] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.112384] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.112398] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.112485] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.112499] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.112584] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.112597] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.115741] vgaarb: loaded [ 0.116506] SCSI subsystem initialized [ 0.116671] libata version 3.00 loaded. [ 0.116910] usbcore: registered new interface driver usbfs [ 0.116968] usbcore: registered new interface driver hub [ 0.117028] usbcore: registered new device driver usb [ 0.120427] pps_core: LinuxPPS API ver. 1 registered [ 0.120437] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.120464] PTP clock support registered [ 0.120653] EDAC MC: Ver: 3.0.0 [ 0.123488] clocksource: Switched to clocksource arch_sys_counter [ 0.132901] NET: Registered protocol family 2 [ 0.133394] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.133514] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.133702] TCP: Hash tables configured (established 8192 bind 8192) [ 0.133785] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.133830] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.133981] NET: Registered protocol family 1 [ 0.134266] RPC: Registered named UNIX socket transport module. [ 0.134277] RPC: Registered udp transport module. [ 0.134287] RPC: Registered tcp transport module. [ 0.134296] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.134309] PCI: CLS 0 bytes, default 64 [ 0.135512] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.137344] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.145391] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.146082] NFS: Registering the id_resolver key type [ 0.146105] Key type id_resolver registered [ 0.146115] Key type id_legacy registered [ 0.146156] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.147682] bounce: pool size: 64 pages [ 0.147721] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.147732] io scheduler noop registered [ 0.147742] io scheduler deadline registered [ 0.147903] io scheduler cfq registered (default) [ 0.147914] io scheduler mq-deadline registered [ 0.153176] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 0.153296] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 0.153705] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.169597] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.169653] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.175833] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 0.183018] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.185034] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.239886] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.242410] console [ttyS0] disabled [ 0.242447] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.132036] console [ttyS0] enabled [ 1.136379] SuperH (H)SCI(F) driver initialized [ 1.141881] msm_serial: driver initialized [ 1.146187] STMicroelectronics ASC driver initialized [ 1.152073] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.161338] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.176724] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.195452] brd: module loaded [ 1.205439] loop: module loaded [ 1.209760] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.218101] as3722 4-0040: AS3722 with revision 0x1 found [ 1.229894] as3722-sd2: supplied by +5V_SYS [ 1.234541] as3722-sd3: supplied by +5V_SYS [ 1.238920] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.245305] as3722-sd4: supplied by +5V_SYS [ 1.249925] as3722-sd5: supplied by +5V_SYS [ 1.255941] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.261972] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.268184] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.274047] as3722-ldo3: supplied by +3.3V_SYS [ 1.278523] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.286297] as3722-ldo4: supplied by +3.3V_SYS [ 1.290955] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.297154] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.301982] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.308894] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.314567] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.320745] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.333210] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.353218] random: fast init done [ 1.356764] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.364536] libphy: Fixed MDIO Bus: probed [ 1.369645] CAN device driver interface [ 1.374419] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.381405] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.387328] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.393298] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.400263] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.409364] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.416812] usbcore: registered new interface driver pegasus [ 1.422515] usbcore: registered new interface driver asix [ 1.427966] usbcore: registered new interface driver ax88179_178a [ 1.434100] usbcore: registered new interface driver cdc_ether [ 1.439972] usbcore: registered new interface driver smsc75xx [ 1.445778] usbcore: registered new interface driver smsc95xx [ 1.451549] usbcore: registered new interface driver net1080 [ 1.457249] usbcore: registered new interface driver cdc_subset [ 1.463197] usbcore: registered new interface driver zaurus [ 1.468834] usbcore: registered new interface driver cdc_ncm [ 1.474712] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.482044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.488582] ehci-pci: EHCI PCI platform driver [ 1.493059] ehci-platform: EHCI generic platform driver [ 1.498493] ehci-orion: EHCI orion driver [ 1.502633] SPEAr-ehci: EHCI SPEAr driver [ 1.506797] ehci-st: EHCI STMicroelectronics driver [ 1.511807] ehci-exynos: EHCI EXYNOS driver [ 1.516157] ehci-atmel: EHCI Atmel driver [ 1.520297] tegra-ehci: Tegra EHCI driver [ 1.527142] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.532557] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.540340] tegra-ehci 7d004000.usb: irq 354, io mem 0x7d004000 [ 1.573508] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.580217] hub 1-0:1.0: USB hub found [ 1.584020] hub 1-0:1.0: 1 port detected [ 1.588475] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.594693] ohci-pci: OHCI PCI platform driver [ 1.599174] ohci-platform: OHCI generic platform driver [ 1.604583] ohci-omap3: OHCI OMAP3 driver [ 1.608723] SPEAr-ohci: OHCI SPEAr driver [ 1.612865] ohci-st: OHCI STMicroelectronics driver [ 1.617890] ohci-atmel: OHCI Atmel driver [ 1.622662] usbcore: registered new interface driver usb-storage [ 1.632990] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.639889] as3722-rtc as3722-rtc: RTC interrupt 377 [ 1.648080] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.655262] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.661946] i2c /dev entries driver [ 1.672097] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.689356] sdhci: Secure Digital Host Controller Interface driver [ 1.695555] sdhci: Copyright(c) Pierre Ossman [ 1.701494] Synopsys Designware Multimedia Card Interface Driver [ 1.708676] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.715067] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.719956] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.725090] mmc0: Unknown controller version (3). You may experience problems. [ 1.732382] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.738712] mmc0: Failed to register LED device: -517 [ 1.745758] ledtrig-cpu: registered to indicate activity on CPUs [ 1.752078] usbcore: registered new interface driver usbhid [ 1.757664] usbhid: USB HID core driver [ 1.765396] NET: Registered protocol family 10 [ 1.770600] Segment Routing with IPv6 [ 1.774339] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.780784] NET: Registered protocol family 17 [ 1.785251] can: controller area network core (rev 20120528 abi 9) [ 1.791584] NET: Registered protocol family 29 [ 1.796040] can: raw protocol (rev 20120528) [ 1.800306] can: broadcast manager protocol (rev 20161123 t) [ 1.805974] can: netlink gateway (rev 20130117) max_hops=1 [ 1.811741] Key type dns_resolver registered [ 1.816555] ThumbEE CPU extension supported. [ 1.820826] Registering SWP/SWPB emulation handler [ 1.837621] +3.3V_RUN: supplied by +3.3V_SYS [ 1.842792] +USB0_VBUS_SW: supplied by +5V_SYS [ 1.847553] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.853589] +5V_USB_HS: supplied by +5V_SYS [ 1.859524] +3.3V_LP0: supplied by +3.3V_SYS [ 1.865684] +5V_HDMI_CON: supplied by +5V_SYS [ 1.870534] +5V_SATA: supplied by +5V_SYS [ 1.875233] +12V_SATA: supplied by +VDD_MUX [ 1.880849] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.887729] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.894720] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.902605] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 1.909242] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 1.920305] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.930511] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 1.941313] as3722-sd2: supplied by +5V_SYS [ 1.945900] as3722-sd3: supplied by +5V_SYS [ 1.950317] as3722-sd4: supplied by +5V_SYS [ 1.954888] as3722-sd5: supplied by +5V_SYS [ 1.960778] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.966598] as3722-ldo1: supplied by +3.3V_RUN [ 1.971386] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.977110] as3722-ldo3: supplied by +3.3V_SYS [ 1.982424] as3722-ldo4: supplied by +3.3V_SYS [ 1.987255] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.992145] as3722-ldo6: supplied by +3.3V_RUN [ 1.996854] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.002229] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.009355] as3722-ldo9: supplied by +5V_SYS [ 2.014938] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.021650] as3722-ldo10: supplied by +5V_SYS [ 2.026823] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.033664] as3722-ldo11: supplied by +3.3V_RUN [ 2.038962] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.048636] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.057711] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.067588] scsi host0: tegra-ahci [ 2.071506] scsi host1: tegra-ahci [ 2.075236] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.083236] ata2: DUMMY [ 2.089046] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.094500] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.102099] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.107471] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.112809] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.118213] tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000 [ 2.153517] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.160550] hub 2-0:1.0: USB hub found [ 2.164405] hub 2-0:1.0: 1 port detected [ 2.170703] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.175654] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.180723] mmc0: Unknown controller version (3). You may experience problems. [ 2.188006] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.193376] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.199853] mmc0: Failed to register LED device: -517 [ 2.206995] mmc0: Unknown controller version (3). You may experience problems. [ 2.214302] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.219620] alloc_contig_range: [fb857, fb858) PFNs busy [ 2.225026] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.231415] mmc0: Failed to register LED device: -517 [ 2.237445] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.245700] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 2.254937] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 2.279662] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 2.288995] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 2.303843] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.311078] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.317305] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.324203] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.331518] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.337076] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.343128] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.352940] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.362754] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.369408] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.379452] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.385542] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 2.395359] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.405176] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.411801] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.421840] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 2.422011] ata1: SATA link down (SStatus 0 SControl 300) [ 2.437006] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits [ 2.446757] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.456440] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 2.466104] PCI: bus0: Fast back to back transfers disabled [ 2.471675] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.479717] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.487959] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 2.494047] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.501041] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.533653] PCI: bus1: Fast back to back transfers disabled [ 2.539231] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.546080] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 2.552107] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.557724] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.564538] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.571906] pci 0000:02:00.0: supports D1 D2 [ 2.576189] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.603647] PCI: bus2: Fast back to back transfers disabled [ 2.609227] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.616012] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 2.622795] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 2.629597] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.637348] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.643440] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 2.650783] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.655762] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 2.662554] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.670323] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 2.677658] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.683765] pci 0000:00:02.0: PCI bridge to [bus 02] [ 2.688727] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.694832] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 2.701613] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.709390] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.716445] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 2.722786] pcieport 0000:00:01.0: Signaling PME with IRQ 393 [ 2.728640] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.735676] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 2.741981] pcieport 0000:00:02.0: Signaling PME with IRQ 394 [ 2.748015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.753618] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 2.784482] alloc_contig_range: [fb853, fb854) PFNs busy [ 2.789803] alloc_contig_range: [fb857, fb858) PFNs busy [ 2.795145] alloc_contig_range: [fb858, fb859) PFNs busy [ 2.801162] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b43000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395 [ 2.810827] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.823647] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.831371] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.838022] [drm] No driver support for vblank timestamp query. [ 2.965129] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.212206] Console: switching to colour frame buffer device 512x135 [ 3.310821] drm drm: fb0: frame buffer device [ 3.315375] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.323265] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 3.331316] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.338642] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.348346] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.353228] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.358278] mmc0: Unknown controller version (3). You may experience problems. [ 3.365635] alloc_contig_range: [fb853, fb854) PFNs busy [ 3.370975] alloc_contig_range: [fb857, fb858) PFNs busy [ 3.376330] alloc_contig_range: [fb858, fb859) PFNs busy [ 3.382572] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.388898] mmc0: Failed to register LED device: -517 [ 3.395432] mmc0: Unknown controller version (3). You may experience problems. [ 3.402713] alloc_contig_range: [fb853, fb854) PFNs busy [ 3.408101] alloc_contig_range: [fb857, fb858) PFNs busy [ 3.413434] alloc_contig_range: [fb858, fb859) PFNs busy [ 3.418786] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.425099] mmc0: Failed to register LED device: -517 [ 3.430884] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.438203] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.443075] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.447960] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:38 UTC (946684898) [ 3.448140] mmc0: Unknown controller version (3). You may experience problems. [ 3.448236] alloc_contig_range: [fb853, fb854) PFNs busy [ 3.448290] alloc_contig_range: [fb857, fb858) PFNs busy [ 3.448344] alloc_contig_range: [fb858, fb859) PFNs busy [ 3.449175] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.486209] +USB0_VBUS_SW: disabling [ 3.489784] +1.8V_RUN_CAM: disabling [ 3.493494] +2.8V_RUN_CAM: disabling [ 3.493831] mmc0: Failed to register LED device: -517 [ 3.495313] mmc0: Unknown controller version (3). You may experience problems. [ 3.495411] alloc_contig_range: [fb853, fb854) PFNs busy [ 3.495462] alloc_contig_range: [fb857, fb858) PFNs busy [ 3.495514] alloc_contig_range: [fb858, fb859) PFNs busy [ 3.495537] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.495951] mmc0: Failed to register LED device: -517 [ 3.536589] +1.2V_RUN_CAM_FRONT: disabling [ 3.540875] +1.05V_RUN_CAM_REAR: disabling [ 3.545262] +3.3V_RUN_TOUCH: disabling [ 3.549197] +2.8V_RUN_CAM_AF: disabling [ 3.553181] +1.8V_RUN_VPP_FUSE: disabling [ 3.557725] Waiting for root device PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803... mount -t sysfs none /sys [ 89.583654] random: crng init done