Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.655162149 -0800
+++ /tmp/foob	2017-03-07 13:32:33.659162165 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-180230-g9d51244 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun Mar 5 17:37:07 PST 2017
+Linux version 4.11.0-rc1-next-20170307-180993-g3c90632 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Mar 7 13:24:55 PST 2017
 Boot CPU: AArch64 Processor [411fd070]
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -29,15 +29,15 @@
 Policy zone: DMA
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
-Memory: 1000128K/1048576K available (8700K kernel code, 962K rwdata, 4200K rodata, 1088K init, 395K bss, 32064K reserved, 16384K cma-reserved)
+Memory: 1000044K/1048576K available (8700K kernel code, 982K rwdata, 4216K rodata, 1088K init, 395K bss, 32148K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff000008900000   (  8704 KB)
-    .rodata : 0xffff000008900000 - 0xffff000008d20000   (  4224 KB)
-      .init : 0xffff000008d20000 - 0xffff000008e30000   (  1088 KB)
-      .data : 0xffff000008e30000 - 0xffff000008f20a00   (   963 KB)
-       .bss : 0xffff000008f20a00 - 0xffff000008f83638   (   396 KB)
+    .rodata : 0xffff000008900000 - 0xffff000008d30000   (  4288 KB)
+      .init : 0xffff000008d30000 - 0xffff000008e40000   (  1088 KB)
+      .data : 0xffff000008e40000 - 0xffff000008f35a00   (   983 KB)
+       .bss : 0xffff000008f35a00 - 0xffff000008f98638   (   396 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -78,7 +78,7 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffff000008907000, 1 data @ ffff000008e35000)
+vdso: 2 pages (1 code @ ffff000008907000, 1 data @ ffff000008e45000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -114,7 +114,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 kvm [1]: HYP mode not available
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.720:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.956:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -180,7 +180,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-03-06 01:37:47 UTC (1488764267)
+rtc-pl031 9010000.pl031: setting system clock to 2017-03-07 21:25:35 UTC (1488921935)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.691162291 -0800
+++ /tmp/foob	2017-03-07 13:32:33.695162307 -0800
@@ -38,21 +38,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################################################
-	 3 MiB/s
+	 ############################################################
+	 2.8 MiB/s
 done
-Bytes transferred = 7536984 (730158 hex)
+Bytes transferred = 7547624 (732ae8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x730158 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x732ae8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Mar 5 17:33:59 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Mar 7 13:21:37 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -71,7 +71,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1538200, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1539880, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993772K/2096128K available (10240K kernel code, 1254K rwdata, 4216K rodata, 2048K init, 536K bss, 36820K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993764K/2096128K available (10240K kernel code, 1260K rwdata, 4240K rodata, 2048K init, 536K bss, 36828K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1539b20   (1255 kB)
-       .bss : 0xc153b000 - 0xc15c12b8   ( 537 kB)
+      .data : 0xc1400000 - 0xc153b1e0   (1261 kB)
+       .bss : 0xc153d000 - 0xc15c32f8   ( 537 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -287,9 +287,9 @@
 sdhci-tegra 78000400.sdhci: Got CD GPIO
 sdhci-tegra 78000400.sdhci: Got WP GPIO
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -307,38 +307,50 @@
 Registering SWP/SWPB emulation handler
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
-mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- mmcblk0: p1 p2 p3
 [drm] No driver support for vblank timestamp query.
-mmc1: new high speed MMC card at address 0001
-mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
-mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
- mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+alloc_contig_range: [fb848, fb849) PFNs busy
+alloc_contig_range: [fb848, fb849) PFNs busy
+alloc_contig_range: [fb848, fb849) PFNs busy
 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-12-28 13:09:17 UTC (978008957)
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-12-30 08:58:17 UTC (978166697)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
-EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk1p1): recovery complete
-EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    2.519478] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+[    2sdhci: Got WP GPIO
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+Waiting for root device PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346...
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.703162341 -0800
+++ /tmp/foob	2017-03-07 13:32:33.707162356 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ######################################################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 5559904 (54d660 hex)
+Bytes transferred = 5561776 (54ddb0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x54d660 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x54ddb0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Mar 5 17:33:51 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Mar 7 13:21:03 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999992K/2096128K available (8192K kernel code, 380K rwdata, 2496K rodata, 1024K init, 305K bss, 30600K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999992K/2096128K available (8192K kernel code, 380K rwdata, 2500K rodata, 1024K init, 305K bss, 30600K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -270,20 +270,11 @@
 sdhci-tegra 78000400.sdhci: Got CD GPIO
 sdhci-tegra 78000400.sdhci: Got WP GPIO
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
- mmcblk0: p1 p2 p3
-mmc1: new high speed MMC card at address 0001
-mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
-mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
- mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
@@ -320,19 +311,46 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fbc5b, fbc5c) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-12-28 13:06:41 UTC (978008801)
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-12-30 08:54:02 UTC (978166442)
+alloc_contig_range: [fbc5b, fbc5c) PFNs busy
+alloc_contig_range: [fbc5c, fbc5d) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fbc5b, fbc5c) PFNs busy
+alloc_contig_range: [fbc5c, fbc5d) PFNs busy
+alloc_contig_range: [fbc5d, fbc5e) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
 ALSA device list:
   #0: NVIDIA Tegra Dalmore
-EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk1p1): recovery complete
-EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    2.736481] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+Waiting for root device PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346...
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+alloc_contig_range: [fbc5b, fbc5c) PFNs busy
+alloc_contig_range: [fbc5c, fbc5d) PFNs busy
+alloc_contig_range: [fbc5d, fbc5e) PFNs busy
+alloc_contig_range: [fbc5e, fbc5f) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fbc5b, fbc5c) PFNs busy
+alloc_contig_range: [fbc5c, fbc5d) PFNs busy
+alloc_contig_range: [fbc5d, fbc5e) PFNs busy
+alloc_contig_range: [fbc5e, fbc5f) PFNs busy
+alloc_contig_range: [fbc5f, fbc60) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.723162420 -0800
+++ /tmp/foob	2017-03-07 13:32:33.727162436 -0800
@@ -33,21 +33,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################################################
-	 4 MiB/s
+	 ############################################################
+	 3.5 MiB/s
 done
-Bytes transferred = 7536984 (730158 hex)
+Bytes transferred = 7547624 (732ae8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x730158 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x732ae8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Mar 5 17:33:59 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Mar 7 13:21:37 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -66,7 +66,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1538200, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1539880, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -79,7 +79,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993652K/2096128K available (10240K kernel code, 1254K rwdata, 4216K rodata, 2048K init, 536K bss, 36940K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993644K/2096128K available (10240K kernel code, 1260K rwdata, 4240K rodata, 2048K init, 536K bss, 36948K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,8 +89,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1539b20   (1255 kB)
-       .bss : 0xc153b000 - 0xc15c12b8   ( 537 kB)
+      .data : 0xc1400000 - 0xc153b1e0   (1261 kB)
+       .bss : 0xc153d000 - 0xc15c32f8   ( 537 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -289,7 +289,7 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -314,12 +314,6 @@
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
@@ -353,15 +347,24 @@
 ata2: DUMMY
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
 tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc1: Unknown controller version (3). You may experience problems.
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb853, fb854) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb857, fb858) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
@@ -382,8 +385,8 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
 ata1: SATA link down (SStatus 0 SControl 300)
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
@@ -393,7 +396,6 @@
 pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
-mmc1: new high speed SDHC card at address aaaa
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
@@ -402,8 +404,6 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
- mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -428,7 +428,10 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b56000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb857, fb858) PFNs busy
+alloc_contig_range: [fb858, fb859) PFNs busy
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b43000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -440,22 +443,42 @@
 of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb857, fb858) PFNs busy
+alloc_contig_range: [fb858, fb859) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb857, fb858) PFNs busy
+alloc_contig_range: [fb858, fb859) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:32 UTC (946684952)
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:17 UTC (946685057)
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb857, fb858) PFNs busy
+alloc_contig_range: [fb858, fb859) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb857, fb858) PFNs busy
+alloc_contig_range: [fb858, fb859) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+Waiting for root device PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803...
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.731162451 -0800
+++ /tmp/foob	2017-03-07 13:32:33.735162466 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -34,18 +34,18 @@
 	 ######################################################
 	 4 MiB/s
 done
-Bytes transferred = 5559904 (54d660 hex)
+Bytes transferred = 5561776 (54ddb0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x54d660 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x54ddb0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -54,7 +54,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Mar 5 17:33:51 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Mar 7 13:21:03 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -77,7 +77,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999872K/2096128K available (8192K kernel code, 380K rwdata, 2496K rodata, 1024K init, 305K bss, 30720K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999872K/2096128K available (8192K kernel code, 380K rwdata, 2500K rodata, 1024K init, 305K bss, 30720K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -272,15 +272,17 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1
+alloc_contig_range: [fbc53, fbc54) PFNs busy
+alloc_contig_range: [fbc53, fbc54) PFNs busy
+alloc_contig_range: [fbc53, fbc54) PFNs busy
+alloc_contig_range: [fbc53, fbc54) PFNs busy
+alloc_contig_range: [fbc53, fbc54) PFNs busy
+alloc_contig_range: [fbc53, fbc54) PFNs busy
+alloc_contig_range: [fbc53, fbc54) PFNs busy
+alloc_contig_range: [fbc53, fbc54) PFNs busy
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
 input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0
@@ -329,7 +331,6 @@
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
 as3722-ldo6: supplied by +3.3V_RUN
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo7: supplied by +1.8V_VDDIO
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
 as3722-ldo9: supplied by +5V_SYS
@@ -337,6 +338,7 @@
 as3722-ldo10: supplied by +5V_SYS
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 as3722-ldo11: supplied by +3.3V_RUN
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
@@ -364,16 +366,20 @@
 hub 4-0:1.0: 2 ports detected
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc1: Unknown controller version (3). You may experience problems.
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc9d, fbc9e) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
-ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
@@ -398,8 +404,6 @@
 pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
@@ -432,21 +436,46 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0af7000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+alloc_contig_range: [fbc9d, fbc9e) PFNs busy
+alloc_contig_range: [fbc9e, fbc9f) PFNs busy
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0af1000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes - going 1024x768
- mmcblk1: p1 p2 p3
-Console: switching to colour frame buffer device 128x48
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+Console: switching to colour frame buffer device 512x135
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc9d, fbc9e) PFNs busy
+alloc_contig_range: [fbc9e, fbc9f) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc9d, fbc9e) PFNs busy
+alloc_contig_range: [fbc9e, fbc9f) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
 as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
+alloc_contig_range: [fbc9d, fbc9e) PFNs busy
+alloc_contig_range: [fbc9e, fbc9f) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc9d, fbc9e) PFNs busy
+alloc_contig_range: [fbc9e, fbc9f) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -458,12 +487,4 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+Waiting for root device PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803...
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.763162577 -0800
+++ /tmp/foob	2017-03-07 13:32:33.767162593 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -41,21 +41,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################################################
-	 3.6 MiB/s
+	 ############################################################
+	 3.5 MiB/s
 done
-Bytes transferred = 7536984 (730158 hex)
+Bytes transferred = 7547624 (732ae8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x730158 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x732ae8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -63,7 +63,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Mar 5 17:33:59 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Mar 7 13:21:37 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -75,7 +75,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c1538200, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1539880, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -88,7 +88,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994668K/2097148K available (10240K kernel code, 1254K rwdata, 4216K rodata, 2048K init, 536K bss, 36944K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1994660K/2097148K available (10240K kernel code, 1260K rwdata, 4240K rodata, 2048K init, 536K bss, 36952K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,8 +98,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1539b20   (1255 kB)
-       .bss : 0xc153b000 - 0xc15c12b8   ( 537 kB)
+      .data : 0xc1400000 - 0xc153b1e0   (1261 kB)
+       .bss : 0xc153d000 - 0xc15c32f8   ( 537 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -295,7 +295,7 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -313,8 +313,6 @@
 Registering SWP/SWPB emulation handler
 +3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
@@ -323,47 +321,117 @@
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +3.3V_PANEL: supplied by +3.3V_RUN
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-elan_i2c 1-0015: failed to read report data: -121
+elan_i2c 1-0015: fetching report descriptor failed.: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
-mmc1: Unknown controller version (3). You may experience problems.
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: Switching to 3.3V signalling voltage failed
-mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-elan_i2c 1-0015: invalid report id data (ff)
-mmc2: Unknown controller version (3). You may experience problems.
-mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
-mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-mmc2: new high speed SDHC card at address 0007
-mmcblk2: mmc2:0007 SD08G 7.42 GiB 
-GPT:Primary header alternate_lba != Alt. header my_lba
-GPT:3014591 != 15564799
-GPT:Primary header thinks Alt. header is not at the end of the disk.
-GPT:3014591 != 15564799
-GPT: Use GNU Parted to correct GPT errors.
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+elan_i2c 1-0015: device initialize failed: -121
 Console: switching to colour frame buffer device 170x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb854, fb855) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb854, fb855) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fb850, fb851) PFNs busy
+alloc_contig_range: [fb851, fb852) PFNs busy
+alloc_contig_range: [fb852, fb853) PFNs busy
+alloc_contig_range: [fb853, fb854) PFNs busy
+alloc_contig_range: [fb854, fb855) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -374,13 +442,4 @@
 +5V_VDD_TS_SW: disabling
 +5V_USB_HS: disabling
 +5V_USB_SS: disabling
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
-EXT4-fs (mmcblk0p3): recovery complete
-EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 179:3.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+Waiting for root device PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023...
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.771162609 -0800
+++ /tmp/foob	2017-03-07 13:32:33.775162625 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -40,20 +40,20 @@
 	 #################################################################
 	 #################################################################
 	 ######################################################
-	 3.6 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 5559904 (54d660 hex)
+Bytes transferred = 5561776 (54ddb0 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 68155 (10a3b hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x54d660 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x54ddb0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013a3a
@@ -62,7 +62,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Mar 5 17:33:51 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Mar 7 13:21:03 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -86,7 +86,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2000888K/2097148K available (8192K kernel code, 380K rwdata, 2496K rodata, 1024K init, 305K bss, 30724K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 2000888K/2097148K available (8192K kernel code, 380K rwdata, 2500K rodata, 1024K init, 305K bss, 30724K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -280,10 +280,18 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
+alloc_contig_range: [fbc50, fbc51) PFNs busy
+alloc_contig_range: [fbc50, fbc51) PFNs busy
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+alloc_contig_range: [fbc50, fbc51) PFNs busy
+alloc_contig_range: [fbc50, fbc51) PFNs busy
+alloc_contig_range: [fbc50, fbc51) PFNs busy
+alloc_contig_range: [fbc50, fbc51) PFNs busy
+alloc_contig_range: [fbc50, fbc51) PFNs busy
+alloc_contig_range: [fbc50, fbc51) PFNs busy
 max98090 0-0010: MAX98090 REVID=0x43
 max98090 0-0010: use default 2.8v micbias
 tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
@@ -292,14 +300,8 @@
 NET: Registered protocol family 10
 Segment Routing with IPv6
 mip6: Mobile IPv6
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
@@ -344,32 +346,78 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 2 ports detected
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
-mmc1: Unknown controller version (3). You may experience problems.
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: Switching to 3.3V signalling voltage failed
-mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc2: Unknown controller version (3). You may experience problems.
-mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
-mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
-mmc2: new high speed SDHC card at address 0007
-mmcblk2: mmc2:0007 SD08G 7.42 GiB 
-GPT:Primary header alternate_lba != Alt. header my_lba
-GPT:3014591 != 15564799
-GPT:Primary header thinks Alt. header is not at the end of the disk.
-GPT:3014591 != 15564799
-GPT: Use GNU Parted to correct GPT errors.
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
 Console: switching to colour frame buffer device 170x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/soc0/gpio-keys/input/input4
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
 as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -381,15 +429,225 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
-EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
-EXT4-fs (mmcblk0p3): recovery complete
-EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 179:3.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+Waiting for root device PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023...
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
 usb 1-3: new high-speed USB device number 3 using tegra-xusb
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+usb 1-1: new high-speed USB device number 4 using tegra-xusb
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+alloc_contig_range: [fbc79, fbc7a) PFNs busy
+usb-storage 1-1:1.0: USB Mass Storage device detected
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+scsi host0: usb-storage 1-1:1.0
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+scsi 0:0:0:0: Direct-Access     SanDisk  SDDR-113         9412 PQ: 0 ANSI: 0
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fbc70, fbc71) PFNs busy
+alloc_contig_range: [fbc71, fbc72) PFNs busy
+alloc_contig_range: [fbc72, fbc73) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
+sd 0:0:0:0: [sda] No Caching mode page found
+sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13
+sd 0:0:0:0: [sda] Attached SCSI removable disk
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.783162657 -0800
+++ /tmp/foob	2017-03-07 13:32:33.783162657 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800546 us
+Bootloader-Cpu Init at (time stamp): 1801353 us
 
 Pinmux changes applied in kernel way
 
@@ -62,20 +62,20 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800520  us
-Bootloader (AosInit) time: 733469 us
-Bootloader Main Init time: 180222 us
-BlockDevMgrInit time: 157532 us
-PartMgrInit time: 9 us
+Miscellaneous avp time: 1801327  us
+Bootloader (AosInit) time: 733446 us
+Bootloader Main Init time: 180042 us
+BlockDevMgrInit time: 157538 us
+PartMgrInit time: 8 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 77100 us 
-Display init time: 574588 us
-Kernel read time: 379 msec
+Partition Table load: 77053 us 
+Display init time: 574439 us
+Kernel read time: 377 msec
 Load Kernel Size:   16304128 Bytes
-Bl Kernel ReadSpeed: 43018000 Bytes/sec
-Pre-Kernel Jump time: 1740034 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5842939 us
+Bl Kernel ReadSpeed: 43247000 Bytes/sec
+Pre-Kernel Jump time: 1740422 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5844561 us
 Booting Linux on physical CPU 0x0
 Linux version 4.8.0-239303-g3477d16 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Oct 7 01:12:37 PDT 2016
 Boot CPU: AArch64 Processor [4e0f0000]
@@ -184,7 +184,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(1.139:1): initialized
+audit: type=2000 audit(1.159:1): initialized
 workingset: timestamp_bits=46 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -251,10 +251,9 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 +VDD_LED: supplied by +VDD_MUX
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
@@ -273,6 +272,9 @@
 Freeing unused kernel memory: 960K (ffff800000c00000 - ffff800000cf0000)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.791162689 -0800
+++ /tmp/foob	2017-03-07 13:32:33.795162705 -0800
@@ -46,21 +46,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################################################
-	 4 MiB/s
+	 ############################################################
+	 3.3 MiB/s
 done
-Bytes transferred = 7536984 (730158 hex)
+Bytes transferred = 7547624 (732ae8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x730158 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x732ae8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -68,7 +68,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Mar 5 17:33:59 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Mar 7 13:21:37 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -78,7 +78,7 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c1538200, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c1539880, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -91,7 +91,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 954592K/1048576K available (10240K kernel code, 1254K rwdata, 4216K rodata, 2048K init, 536K bss, 28448K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 954584K/1048576K available (10240K kernel code, 1260K rwdata, 4240K rodata, 2048K init, 536K bss, 28456K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -101,8 +101,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1539b20   (1255 kB)
-       .bss : 0xc153b000 - 0xc15c12b8   ( 537 kB)
+      .data : 0xc1400000 - 0xc153b1e0   (1261 kB)
+       .bss : 0xc153d000 - 0xc15c32f8   ( 537 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -311,11 +311,11 @@
 Synopsys Designware Multimedia Card Interface Driver
 sdhci-pltfm: SDHCI platform and OF driver helper
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
 sdhci-tegra c8000600.sdhci: Got CD GPIO
 sdhci-tegra c8000600.sdhci: Got WP GPIO
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -334,32 +334,79 @@
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c045, 3c046) PFNs busy
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
+alloc_contig_range: [3c045, 3c046) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c049, 3c04a) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c049, 3c04a) PFNs busy
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
+alloc_contig_range: [3c04a, 3c04b) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c049, 3c04a) PFNs busy
+alloc_contig_range: [3c04a, 3c04b) PFNs busy
+alloc_contig_range: [3c04b, 3c04c) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+Waiting for root device PARTUUID=11eb23c1-01...
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c049, 3c04a) PFNs busy
+alloc_contig_range: [3c04a, 3c04b) PFNs busy
+alloc_contig_range: [3c04b, 3c04c) PFNs busy
+alloc_contig_range: [3c04c, 3c04d) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c049, 3c04a) PFNs busy
+alloc_contig_range: [3c04a, 3c04b) PFNs busy
+alloc_contig_range: [3c04b, 3c04c) PFNs busy
+alloc_contig_range: [3c04c, 3c04d) PFNs busy
+alloc_contig_range: [3c04d, 3c04e) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-random: fast init done
 asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/#  
-root@(none):/# 
\ No newline at end of file
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c049, 3c04a) PFNs busy
+alloc_contig_range: [3c04a, 3c04b) PFNs busy
+alloc_contig_range: [3c04b, 3c04c) PFNs busy
+alloc_contig_range: [3c04c, 3c04d) PFNs busy
+alloc_contig_range: [3c04d, 3c04e) PFNs busy
+alloc_contig_range: [3c04e, 3c04f) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c045, 3c046) PFNs busy
+alloc_contig_range: [3c049, 3c04a) PFNs busy
+alloc_contig_range: [3c04a, 3c04b) PFNs busy
+alloc_contig_range: [3c04b, 3c04c) PFNs busy
+alloc_contig_range: [3c04c, 3c04d) PFNs busy
+alloc_contig_range: [3c04d, 3c04e) PFNs busy
+alloc_contig_range: [3c04e, 3c04f) PFNs busy
+alloc_contig_range: [3c04f, 3c050) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+ 
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.799162721 -0800
+++ /tmp/foob	2017-03-07 13:32:33.803162735 -0800
@@ -47,7 +47,7 @@
 	 ######################################################
 	 4.1 MiB/s
 done
-Bytes transferred = 5559904 (54d660 hex)
+Bytes transferred = 5561776 (54ddb0 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -58,7 +58,7 @@
 done
 Bytes transferred = 21426 (53b2 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x54d660 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x54ddb0 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024103b1
@@ -67,7 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Mar 5 17:33:51 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Mar 7 13:21:03 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -89,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 960812K/1048576K available (8192K kernel code, 380K rwdata, 2496K rodata, 1024K init, 305K bss, 22228K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 960812K/1048576K available (8192K kernel code, 380K rwdata, 2500K rodata, 1024K init, 305K bss, 22228K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -295,39 +295,22 @@
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
 sdhci-tegra c8000600.sdhci: Got CD GPIO
 sdhci-tegra c8000600.sdhci: Got WP GPIO
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-tlv320aic23-codec 2-001a: Control not supported for path LLINEIN -> [NULL] -> Line Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input
-tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input
-tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input
-tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input
-tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
-tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
 tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
 NET: Registered protocol family 10
 Segment Routing with IPv6
-mmc0: host does not support reading read-only switch, assuming write-enable
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
-mmc1: new high speed SD card at address b368
 NET: Registered protocol family 15
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
- mmcblk1: p1 p2
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20161123 t)
 can: netlink gateway (rev 20130117) max_hops=1
@@ -343,25 +326,69 @@
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c058, 3c059) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+alloc_contig_range: [3c058, 3c059) PFNs busy
+alloc_contig_range: [3c059, 3c05a) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 ALSA device list:
   #0: tegra-trimslice
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c058, 3c059) PFNs busy
+alloc_contig_range: [3c059, 3c05a) PFNs busy
+alloc_contig_range: [3c05a, 3c05b) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+Waiting for root device PARTUUID=11eb23c1-01...
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+alloc_contig_range: [3c058, 3c059) PFNs busy
+alloc_contig_range: [3c059, 3c05a) PFNs busy
+alloc_contig_range: [3c05a, 3c05b) PFNs busy
+alloc_contig_range: [3c05b, 3c05c) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c058, 3c059) PFNs busy
+alloc_contig_range: [3c059, 3c05a) PFNs busy
+alloc_contig_range: [3c05a, 3c05b) PFNs busy
+alloc_contig_range: [3c05b, 3c05c) PFNs busy
+alloc_contig_range: [3c05c, 3c05d) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-random: fast init done
 asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/#  
-root@(none):/# 
\ No newline at end of file
+alloc_contig_range: [3c058, 3c059) PFNs busy
+alloc_contig_range: [3c059, 3c05a) PFNs busy
+alloc_contig_range: [3c05a, 3c05b) PFNs busy
+alloc_contig_range: [3c05b, 3c05c) PFNs busy
+alloc_contig_range: [3c05c, 3c05d) PFNs busy
+alloc_contig_range: [3c05d, 3c05e) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+alloc_contig_range: [3c058, 3c059) PFNs busy
+alloc_contig_range: [3c059, 3c05a) PFNs busy
+alloc_contig_range: [3c05a, 3c05b) PFNs busy
+alloc_contig_range: [3c05b, 3c05c) PFNs busy
+alloc_contig_range: [3c05c, 3c05d) PFNs busy
+alloc_contig_range: [3c05d, 3c05e) PFNs busy
+alloc_contig_range: [3c05e, 3c05f) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+ 
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.839162880 -0800
+++ /tmp/foob	2017-03-07 13:32:33.843162896 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 754833 us
-Basic modules init took 350073 us
+Tegraboot started after 746567 us
+Basic modules init took 348892 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14365 us
-Carveout took 252718 us
-CPU initialization took 92326 us
-Total time taken by TegraBoot 709482 us
+Next stage binary read took 14362 us
+Carveout took 252735 us
+CPU initialization took 92301 us
+Total time taken by TegraBoot 708290 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.595] LPDDR4 Training: Number of tables = 10
+64b[0001.585] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-15337984 bytes read in 804 ms (18.2 MiB/s)
+15424000 bytes read in 807 ms (18.2 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44882 bytes read in 459 ms (94.7 KiB/s)
+44882 bytes read in 460 ms (94.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-180230-g9d51244 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun Mar 5 17:37:07 PST 2017
+Linux version 4.11.0-rc1-next-20170307-180993-g3c90632 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Mar 7 13:24:55 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -174,15 +174,15 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2983716K/3131392K available (8700K kernel code, 962K rwdata, 4200K rodata, 1088K init, 395K bss, 131292K reserved, 16384K cma-reserved)
+Memory: 2983632K/3131392K available (8700K kernel code, 982K rwdata, 4216K rodata, 1088K init, 395K bss, 131376K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff000008900000   (  8704 KB)
-    .rodata : 0xffff000008900000 - 0xffff000008d20000   (  4224 KB)
-      .init : 0xffff000008d20000 - 0xffff000008e30000   (  1088 KB)
-      .data : 0xffff000008e30000 - 0xffff000008f20a00   (   963 KB)
-       .bss : 0xffff000008f20a00 - 0xffff000008f83638   (   396 KB)
+    .rodata : 0xffff000008900000 - 0xffff000008d30000   (  4288 KB)
+      .init : 0xffff000008d30000 - 0xffff000008e40000   (  1088 KB)
+      .data : 0xffff000008e40000 - 0xffff000008f35a00   (   983 KB)
+       .bss : 0xffff000008f35a00 - 0xffff000008f98638   (   396 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -236,7 +236,7 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffff000008907000, 1 data @ ffff000008e35000)
+vdso: 2 pages (1 code @ ffff000008907000, 1 data @ ffff000008e45000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -270,7 +270,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 808ee000
+kvm [1]: IDMAP page: 808f1000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -333,7 +333,7 @@
 Synopsys Designware Multimedia Card Interface Driver
 sdhci-pltfm: SDHCI platform and OF driver helper
 mmc0: Unknown controller version (3). You may experience problems.
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+mmc0: Failed to register LED device: -517
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -341,22 +341,10 @@
 9pnet: Installing 9P2000 support
 Key type dns_resolver registered
 registered taskstats version 1
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [fe040, fe041) PFNs busy
+mmc0: Failed to register LED device: -517
 hctosys: unable to open rtc device (rtc0)
 ALSA device list:
   No soundcards found.
 Waiting for root device PARTUUID=00000000-0001-0000-788f-a75600000000...
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
-EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 1088K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job contr[    1.300552] random: fast init done
-ol in this shell
-root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.847162912 -0800
+++ /tmp/foob	2017-03-07 13:32:33.851162926 -0800
@@ -1,5 +1,4 @@
-17
-Boot CPU: AArch64 Processor [411fd071]
+rocessor [411fd071]
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x00000000f5400000
@@ -32,15 +31,15 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2837900K/2988032K available (8700K kernel code, 962K rwdata, 4200K rodata, 1088K init, 395K bss, 133748K reserved, 16384K cma-reserved)
+Memory: 2837816K/2988032K available (8700K kernel code, 982K rwdata, 4216K rodata, 1088K init, 395K bss, 133832K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff000008900000   (  8704 KB)
-    .rodata : 0xffff000008900000 - 0xffff000008d20000   (  4224 KB)
-      .init : 0xffff000008d20000 - 0xffff000008e30000   (  1088 KB)
-      .data : 0xffff000008e30000 - 0xffff000008f20a00   (   963 KB)
-       .bss : 0xffff000008f20a00 - 0xffff000008f83638   (   396 KB)
+    .rodata : 0xffff000008900000 - 0xffff000008d30000   (  4288 KB)
+      .init : 0xffff000008d30000 - 0xffff000008e40000   (  1088 KB)
+      .data : 0xffff000008e40000 - 0xffff000008f35a00   (   983 KB)
+       .bss : 0xffff000008f35a00 - 0xffff000008f98638   (   396 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -69,7 +68,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x62f8: expected 0x2004f400
+boot misc3 0x8ae8: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -82,7 +81,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-180230-g9d51244 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun Mar 5 17:37:07 PST 2017
+Linux version 4.11.0-rc1-next-20170307-180993-g3c90632 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Mar 7 13:24:55 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -116,15 +115,15 @@
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2837900K/2988032K available (8700K kernel code, 962K rwdata, 4200K rodata, 1088K init, 395K bss, 133748K reserved, 16384K cma-reserved)
+Memory: 2837816K/2988032K available (8700K kernel code, 982K rwdata, 4216K rodata, 1088K init, 395K bss, 133832K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff000008900000   (  8704 KB)
-    .rodata : 0xffff000008900000 - 0xffff000008d20000   (  4224 KB)
-      .init : 0xffff000008d20000 - 0xffff000008e30000   (  1088 KB)
-      .data : 0xffff000008e30000 - 0xffff000008f20a00   (   963 KB)
-       .bss : 0xffff000008f20a00 - 0xffff000008f83638   (   396 KB)
+    .rodata : 0xffff000008900000 - 0xffff000008d30000   (  4288 KB)
+      .init : 0xffff000008d30000 - 0xffff000008e40000   (  1088 KB)
+      .data : 0xffff000008e40000 - 0xffff000008f35a00   (   983 KB)
+       .bss : 0xffff000008f35a00 - 0xffff000008f98638   (   396 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -153,7 +152,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x62f8: expected 0x2004f400
+boot misc3 0x8ae8: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -195,7 +194,7 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffff000008907000, 1 data @ ffff000008e35000)
+vdso: 2 pages (1 code @ ffff000008907000, 1 data @ ffff000008e45000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -236,14 +235,14 @@
 Unpacking initramfs...
 Freeing initrd memory: 2364K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 808ee000
+kvm [1]: IDMAP page: 808f1000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
 kvm [1]: virtual timer IRQ4
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.327:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.331:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -319,7 +318,7 @@
 Synopsys Designware Multimedia Card Interface Driver
 sdhci-pltfm: SDHCI platform and OF driver helper
 mmc0: Unknown controller version (3). You may experience problems.
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+mmc0: Failed to register LED device: -517
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -328,16 +327,16 @@
 Key type dns_resolver registered
 registered taskstats version 1
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [f5469, f546a) PFNs busy
+mmc0: Failed to register LED device: -517
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
-mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2000-12-15 07:04:25 UTC (976863865)
-mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+mmc0: Unknown controller version (3). You may experience problems.
+alloc_contig_range: [f5469, f546a) PFNs busy
+alloc_contig_range: [f546a, f546b) PFNs busy
+mmc0: Failed to register LED device: -517
+max77686-rtc max77620-rtc: setting system clock to 2000-12-17 02:53:51 UTC (977021631)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.859162958 -0800
+++ /tmp/foob	2017-03-07 13:32:33.859162958 -0800
@@ -38,21 +38,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###########################################################
-	 3.3 MiB/s
+	 ############################################################
+	 2.9 MiB/s
 done
-Bytes transferred = 7536984 (730158 hex)
+Bytes transferred = 7547624 (732ae8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x730158 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x732ae8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Mar 5 17:33:59 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Mar 7 13:21:37 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -70,7 +70,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1538200, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1539880, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993692K/2096128K available (10240K kernel code, 1254K rwdata, 4216K rodata, 2048K init, 536K bss, 36900K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1993684K/2096128K available (10240K kernel code, 1260K rwdata, 4240K rodata, 2048K init, 536K bss, 36908K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0d00000   (11232 kB)
       .init : 0xc1200000 - 0xc1400000   (2048 kB)
-      .data : 0xc1400000 - 0xc1539b20   (1255 kB)
-       .bss : 0xc153b000 - 0xc15c12b8   ( 537 kB)
+      .data : 0xc1400000 - 0xc153b1e0   (1261 kB)
+       .bss : 0xc153d000 - 0xc15c32f8   ( 537 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -281,9 +281,9 @@
 sdhci-tegra 78000000.sdhci: Got CD GPIO
 sdhci-tegra 78000000.sdhci: Got WP GPIO
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -308,17 +308,7 @@
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
-mmc1: new high speed MMC card at address 0001
-mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
-mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
-mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
-Primary GPT is invalid, using alternate GPT.
- mmcblk1: p1 p2 p3 p4 p5
- mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -363,7 +353,8 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 374
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0afe000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+alloc_contig_range: [fb848, fb849) PFNs busy
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0aec000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -374,27 +365,41 @@
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+alloc_contig_range: [fb848, fb849) PFNs busy
+alloc_contig_range: [fb848, fb849) PFNs busy
+alloc_contig_range: [fb848, fb849) PFNs busy
 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+alloc_contig_range: [fb848, fb849) PFNs busy
+alloc_contig_range: [fb848, fb849) PFNs busy
+alloc_contig_range: [fb848, fb849) PFNs busy
 tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 vdd_sata,avdd_plle: disabling
 usb1_vbus: disabling
-EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
-EXT4-fs (mmcblk1p1): recovery complete
-EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    4.083620] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Waiting for root device PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0...
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fb848, fb849) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-03-07 13:32:33.871163006 -0800
+++ /tmp/foob	2017-03-07 13:32:33.871163006 -0800
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ######################################################
-	 3.3 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 5559904 (54d660 hex)
+Bytes transferred = 5561776 (54ddb0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x54d660 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x54ddb0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.11.0-rc1-next-20170306-155797-g9d51244 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Mar 5 17:33:51 PST 2017
+Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Mar 7 13:21:03 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -81,7 +81,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999912K/2096128K available (8192K kernel code, 380K rwdata, 2496K rodata, 1024K init, 305K bss, 30680K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999912K/2096128K available (8192K kernel code, 380K rwdata, 2500K rodata, 1024K init, 305K bss, 30680K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -264,21 +264,11 @@
 sdhci-tegra 78000000.sdhci: Got CD GPIO
 sdhci-tegra 78000000.sdhci: Got WP GPIO
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+mmc0: Failed to register LED device: -517
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-mmc1: new high speed MMC card at address 0001
-mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
-mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
-mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-Primary GPT is invalid, using alternate GPT.
- mmcblk1: p1 p2 p3 p4 p5
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
- mmcblk0: p1 p2 p3
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
@@ -355,7 +345,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 374
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0a10000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09bd000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -376,18 +366,29 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fbc5f, fbc60) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 vdd_sata,avdd_plle: disabling
 usb1_vbus: disabling
 ALSA device list:
   #0: NVIDIA Tegra Beaver
-EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
-EXT4-fs (mmcblk1p1): recovery complete
-EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 1024K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    4.380134] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Waiting for root device PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0...
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
+asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+alloc_contig_range: [fbc5f, fbc60) PFNs busy
+alloc_contig_range: [fbc60, fbc61) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
+alloc_contig_range: [fbc5f, fbc60) PFNs busy
+alloc_contig_range: [fbc60, fbc61) PFNs busy
+alloc_contig_range: [fbc61, fbc62) PFNs busy
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: Failed to register LED device: -517
