U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 2.9 MiB/s done Bytes transferred = 7547624 (732ae8 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 2.6 MiB/s done Bytes transferred = 51804 (ca5c hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x732ae8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffffa5b ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.0-rc1-next-20170307-156560-g3c90632 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Mar 7 13:21:37 PST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c1539880, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 16 pages/cpu @eef8c000 s34432 r8192 d22912 u65536 [ 0.000000] pcpu-alloc: s34432 r8192 d22912 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993684K/2096128K available (10240K kernel code, 1260K rwdata, 4240K rodata, 2048K init, 536K bss, 36908K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc153b1e0 (1261 kB) [ 0.000000] .bss : 0xc153d000 - 0xc15c32f8 ( 537 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000012] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000030] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000039] Switching to timer-based delay loop, resolution 1000ns [ 0.002785] Console: colour dummy device 80x30 [ 0.002812] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.002822] pid_max: default: 32768 minimum: 301 [ 0.002900] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002909] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003283] CPU: Testing write buffer coherency: ok [ 0.003599] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003756] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.006363] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.006855] EFI services will not be available. [ 0.007006] smp: Bringing up secondary CPUs ... [ 0.010372] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020332] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.030331] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.030373] smp: Brought up 1 node, 4 CPUs [ 0.030387] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.030393] CPU: All CPU(s) started in SVC mode. [ 0.031072] devtmpfs: initialized [ 0.039366] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.039776] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.039799] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.043188] pinctrl core: initialized pinctrl subsystem [ 0.044942] NET: Registered protocol family 16 [ 0.047891] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.049596] cpuidle: using governor menu [ 0.064060] No ATAGs? [ 0.064165] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.064176] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.068123] Serial: AMBA PL011 UART driver [ 0.068597] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.077651] AT91: Could not find identification node [ 0.078109] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.078123] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.078166] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.078174] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.078217] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.078225] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.078313] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.078321] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.080229] vgaarb: loaded [ 0.080684] SCSI subsystem initialized [ 0.080819] libata version 3.00 loaded. [ 0.080964] usbcore: registered new interface driver usbfs [ 0.080997] usbcore: registered new interface driver hub [ 0.081032] usbcore: registered new device driver usb [ 0.088080] vrtc: supplied by vdd_5v_in [ 0.091365] vio: supplied by vdd_5v_in [ 0.101820] vdd1: supplied by vdd_5v_in [ 0.103174] vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV [ 0.111826] vdd2: supplied by vdd_5v_in [ 0.131809] ldo1: supplied by vdd_1v5_gen [ 0.134191] ldo2: supplied by vdd_1v5_gen [ 0.134660] vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV [ 0.136887] ldo3: supplied by vdd_5v_in [ 0.139243] ldo4: supplied by vdd_5v_in [ 0.141814] ldo5: supplied by vdd_5v_in [ 0.151812] ldo6: supplied by vdd_1v8_gen [ 0.152281] avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV [ 0.154529] ldo7: supplied by vdd_1v8_gen [ 0.161818] ldo8: supplied by vdd_1v8_gen [ 0.171921] pps_core: LinuxPPS API ver. 1 registered [ 0.171927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.171941] PTP clock support registered [ 0.172080] EDAC MC: Ver: 3.0.0 [ 0.173592] clocksource: Switched to clocksource timer_us [ 0.178802] NET: Registered protocol family 2 [ 0.179184] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.179237] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.179315] TCP: Hash tables configured (established 8192 bind 8192) [ 0.179435] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.179492] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.179656] NET: Registered protocol family 1 [ 0.179900] RPC: Registered named UNIX socket transport module. [ 0.179960] RPC: Registered udp transport module. [ 0.179966] RPC: Registered tcp transport module. [ 0.179970] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.179979] PCI: CLS 0 bytes, default 64 [ 0.180760] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.181993] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.186692] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.187109] NFS: Registering the id_resolver key type [ 0.187135] Key type id_resolver registered [ 0.187140] Key type id_legacy registered [ 0.187166] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.188193] bounce: pool size: 64 pages [ 0.188230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.188238] io scheduler noop registered [ 0.188243] io scheduler deadline registered [ 0.188338] io scheduler cfq registered (default) [ 0.188344] io scheduler mq-deadline registered [ 0.194377] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.194393] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.194406] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.194415] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.194861] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.194905] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.195227] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.195246] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.195259] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.195299] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.195330] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.195361] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.195401] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.195883] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.195995] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.201219] tegra-pcie 3000.pcie-controller: 2x3 configuration [ 0.201364] tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517 [ 0.206827] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.207982] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.239533] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.241607] console [ttyS0] disabled [ 0.241646] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.257259] console [ttyS0] enabled [ 1.261289] SuperH (H)SCI(F) driver initialized [ 1.266414] msm_serial: driver initialized [ 1.270601] STMicroelectronics ASC driver initialized [ 1.279827] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.294122] brd: module loaded [ 1.302935] loop: module loaded [ 1.311432] m25p80 spi32766.1: w25q32 (4096 Kbytes) [ 1.318205] libphy: Fixed MDIO Bus: probed [ 1.322956] CAN device driver interface [ 1.327399] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.333807] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.339623] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.345572] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.352514] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.360001] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.367442] usbcore: registered new interface driver pegasus [ 1.373111] usbcore: registered new interface driver asix [ 1.378530] usbcore: registered new interface driver ax88179_178a [ 1.384638] usbcore: registered new interface driver cdc_ether [ 1.390479] usbcore: registered new interface driver smsc75xx [ 1.396245] usbcore: registered new interface driver smsc95xx [ 1.401992] usbcore: registered new interface driver net1080 [ 1.407664] usbcore: registered new interface driver cdc_subset [ 1.413594] usbcore: registered new interface driver zaurus [ 1.419189] usbcore: registered new interface driver cdc_ncm [ 1.426220] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.432732] ehci-pci: EHCI PCI platform driver [ 1.437210] ehci-platform: EHCI generic platform driver [ 1.442540] ehci-orion: EHCI orion driver [ 1.446625] SPEAr-ehci: EHCI SPEAr driver [ 1.450698] ehci-st: EHCI STMicroelectronics driver [ 1.455644] ehci-exynos: EHCI EXYNOS driver [ 1.459900] ehci-atmel: EHCI Atmel driver [ 1.463984] tegra-ehci: Tegra EHCI driver [ 1.468279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.474462] ohci-pci: OHCI PCI platform driver [ 1.478922] ohci-platform: OHCI generic platform driver [ 1.484244] ohci-omap3: OHCI OMAP3 driver [ 1.488323] SPEAr-ohci: OHCI SPEAr driver [ 1.492396] ohci-st: OHCI STMicroelectronics driver [ 1.497345] ohci-atmel: OHCI Atmel driver [ 1.501767] usbcore: registered new interface driver usb-storage [ 1.510238] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.517412] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.526277] random: fast init done [ 1.539563] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.547162] i2c /dev entries driver [ 1.558733] sdhci: Secure Digital Host Controller Interface driver [ 1.564920] sdhci: Copyright(c) Pierre Ossman [ 1.570177] Synopsys Designware Multimedia Card Interface Driver [ 1.576848] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.582999] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 1.587889] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 1.593996] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.601219] mmc0: Failed to register LED device: -517 [ 1.608590] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.615751] mmc0: Failed to register LED device: -517 [ 1.623104] ledtrig-cpu: registered to indicate activity on CPUs [ 1.629312] usbcore: registered new interface driver usbhid [ 1.634878] usbhid: USB HID core driver [ 1.641147] NET: Registered protocol family 10 [ 1.646198] Segment Routing with IPv6 [ 1.649886] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.656221] NET: Registered protocol family 17 [ 1.660659] can: controller area network core (rev 20120528 abi 9) [ 1.666956] NET: Registered protocol family 29 [ 1.671388] can: raw protocol (rev 20120528) [ 1.675657] can: broadcast manager protocol (rev 20161123 t) [ 1.681303] can: netlink gateway (rev 20130117) max_hops=1 [ 1.687049] Key type dns_resolver registered [ 1.691702] ThumbEE CPU extension supported. [ 1.695980] Registering SWP/SWPB emulation handler [ 1.710926] vdd_ddr: supplied by vdd_5v_in [ 1.716273] vdd_5v_sata: supplied by vdd_5v_in [ 1.721004] usb1_vbus: supplied by vdd_5v_in [ 1.725613] usb3_vbus: supplied by vdd_5v_in [ 1.731100] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 1.737019] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 1.742525] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 1.748582] tegra-pcie 3000.pcie-controller: 2x3 configuration [ 1.756801] tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes [ 1.821944] tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes [ 2.232577] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 2.642520] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 3.051980] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 3.060166] tegra-pcie 3000.pcie-controller: link 2 down, ignoring [ 3.066463] tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00 [ 3.073413] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.079590] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.086457] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.093756] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.099251] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.105275] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.115033] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.124778] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.131378] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.141255] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.150987] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.160629] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 3.170266] PCI: bus0: Fast back to back transfers disabled [ 3.175832] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.183825] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.193545] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.203271] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.212998] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits [ 3.222736] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.228759] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.234342] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.241555] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.248850] pci 0000:01:00.0: supports D1 D2 [ 3.253108] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.283617] PCI: bus1: Fast back to back transfers disabled [ 3.289178] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.295849] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.303586] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.309668] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.317412] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.325156] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.331237] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.336196] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.342276] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.350025] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.357037] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.363333] pcieport 0000:00:01.0: Signaling PME with IRQ 374 [ 3.369289] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.374879] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.381085] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.386980] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0aec000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375 [ 3.396978] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.408369] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.414989] [drm] No driver support for vblank timestamp query. [ 3.420926] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.447501] Console: switching to colour frame buffer device 128x48 [ 3.459810] drm drm: fb0: frame buffer device [ 3.464310] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.476370] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.482826] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.488250] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.495950] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.501354] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.506756] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.512146] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.543996] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.551233] hub 1-0:1.0: USB hub found [ 3.555009] hub 1-0:1.0: 1 port detected [ 3.560086] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.565501] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.573147] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.578553] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.583956] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.589322] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.623987] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.631119] hub 2-0:1.0: USB hub found [ 3.634894] hub 2-0:1.0: 1 port detected [ 3.640279] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 3.645176] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 3.651286] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.656662] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.664685] mmc0: Failed to register LED device: -517 [ 3.674092] alloc_contig_range: [fb848, fb849) PFNs busy [ 3.679445] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.687002] mmc0: Failed to register LED device: -517 [ 3.699395] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.709026] vdd_sata,avdd_plle: disabling [ 3.713773] usb1_vbus: disabling [ 3.717422] Waiting for root device PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0... [ 3.993986] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.656689] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60 [ 4.669042] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 4.673945] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 4.680077] alloc_contig_range: [fb848, fb849) PFNs busy [ 4.685486] mmc0: Invalid maximum block size, assuming 512 bytes [ 4.693107] mmc0: Failed to register LED device: -517 [ 4.702506] alloc_contig_range: [fb848, fb849) PFNs busy [ 4.707878] mmc0: Invalid maximum block size, assuming 512 bytes [ 4.715828] mmc0: Failed to register LED device: -517