U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2.8 MiB/s done Bytes transferred = 7510704 (729ab0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.7 MiB/s done Bytes transferred = 68155 (10a3b hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x729ab0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013a3a Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.10.0-rc7-next-20170210-152444-g632571b (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Feb 10 00:04:49 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c153a800, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 16 pages/cpu @eef85000 s34432 r8192 d22912 u65536 [ 0.000000] pcpu-alloc: s34432 r8192 d22912 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994656K/2097148K available (10240K kernel code, 1264K rwdata, 4204K rodata, 2048K init, 536K bss, 36956K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc153c1a0 (1265 kB) [ 0.000000] .bss : 0xc153e000 - 0xc15c4178 ( 537 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000013] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000019] Switching to timer-based delay loop, resolution 1000ns [ 0.001796] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001804] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001811] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001815] Switching to timer-based delay loop, resolution 83ns [ 0.002022] Console: colour dummy device 80x30 [ 0.002036] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002043] pid_max: default: 32768 minimum: 301 [ 0.002085] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002090] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002284] CPU: Testing write buffer coherency: ok [ 0.002407] /cpus/cpu@0 missing clock-frequency property [ 0.002422] /cpus/cpu@1 missing clock-frequency property [ 0.002437] /cpus/cpu@2 missing clock-frequency property [ 0.002452] /cpus/cpu@3 missing clock-frequency property [ 0.002457] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002537] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003901] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004132] EFI services will not be available. [ 0.004228] smp: Bringing up secondary CPUs ... [ 0.004462] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011904] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021908] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031692] smp: Brought up 1 node, 4 CPUs [ 0.031700] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031703] CPU: All CPU(s) started in SVC mode. [ 0.032256] devtmpfs: initialized [ 0.038002] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.038196] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038716] pinctrl core: initialized pinctrl subsystem [ 0.039482] NET: Registered protocol family 16 [ 0.040208] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041100] cpuidle: using governor menu [ 0.050293] No ATAGs? [ 0.050349] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.050355] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.052975] Serial: AMBA PL011 UART driver [ 0.053333] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.058572] +5V_SYS: supplied by +VDD_MUX [ 0.058670] +3.3V_SYS: supplied by +VDD_MUX [ 0.058874] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.058880] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058910] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058915] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058944] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058949] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058978] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058983] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.059061] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.059065] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.059093] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.059098] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.060181] vgaarb: loaded [ 0.060457] SCSI subsystem initialized [ 0.060524] libata version 3.00 loaded. [ 0.060612] usbcore: registered new interface driver usbfs [ 0.060632] usbcore: registered new interface driver hub [ 0.060655] usbcore: registered new device driver usb [ 0.061979] pps_core: LinuxPPS API ver. 1 registered [ 0.061983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.061991] PTP clock support registered [ 0.062060] EDAC MC: Ver: 3.0.0 [ 0.062471] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.062481] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062907] clocksource: Switched to clocksource arch_sys_counter [ 0.066122] NET: Registered protocol family 2 [ 0.066309] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.066342] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.066404] TCP: Hash tables configured (established 8192 bind 8192) [ 0.066440] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.066456] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.066511] NET: Registered protocol family 1 [ 0.066627] RPC: Registered named UNIX socket transport module. [ 0.066631] RPC: Registered udp transport module. [ 0.066634] RPC: Registered tcp transport module. [ 0.066637] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.066642] PCI: CLS 0 bytes, default 64 [ 0.067075] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.067571] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.067818] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.070625] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.070872] NFS: Registering the id_resolver key type [ 0.070883] Key type id_resolver registered [ 0.070887] Key type id_legacy registered [ 0.070904] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.071450] bounce: pool size: 64 pages [ 0.071469] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.071474] io scheduler noop registered [ 0.071477] io scheduler deadline registered [ 0.071538] io scheduler cfq registered (default) [ 0.071541] io scheduler mq-deadline registered [ 0.073393] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.083153] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.083853] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.102066] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.103218] console [ttyS0] disabled [ 0.103235] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.982461] console [ttyS0] enabled [ 0.986232] SuperH (H)SCI(F) driver initialized [ 0.991092] msm_serial: driver initialized [ 0.995249] STMicroelectronics ASC driver initialized [ 1.002851] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.009393] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.016701] panel-simple panel: panel supply power not found, using dummy regulator [ 1.027843] brd: module loaded [ 1.033250] loop: module loaded [ 1.037279] as3722 4-0040: AS3722 with revision 0x1 found [ 1.047257] as3722-sd2: supplied by +5V_SYS [ 1.051666] as3722-sd3: supplied by +5V_SYS [ 1.056002] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.062165] as3722-sd4: supplied by +5V_SYS [ 1.066544] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.072281] as3722-sd5: supplied by +5V_SYS [ 1.077867] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.083592] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.089602] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.095219] as3722-ldo3: supplied by +3.3V_SYS [ 1.099665] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.107234] as3722-ldo4: supplied by +3.3V_SYS [ 1.111826] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.117851] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.122615] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.129303] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.135337] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.140101] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.146652] as3722-ldo9: supplied by +5V_SYS [ 1.151211] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.157407] as3722-ldo10: supplied by +5V_SYS [ 1.161909] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.168343] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.180753] random: fast init done [ 1.186680] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.192775] libphy: Fixed MDIO Bus: probed [ 1.197260] CAN device driver interface [ 1.201410] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.207538] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.213360] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.219285] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.226233] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.233025] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.240422] usbcore: registered new interface driver pegasus [ 1.246086] usbcore: registered new interface driver asix [ 1.251481] usbcore: registered new interface driver ax88179_178a [ 1.257573] usbcore: registered new interface driver cdc_ether [ 1.263410] usbcore: registered new interface driver smsc75xx [ 1.269160] usbcore: registered new interface driver smsc95xx [ 1.274907] usbcore: registered new interface driver net1080 [ 1.280560] usbcore: registered new interface driver cdc_subset [ 1.286479] usbcore: registered new interface driver zaurus [ 1.292053] usbcore: registered new interface driver cdc_ncm [ 1.298357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.304875] ehci-pci: EHCI PCI platform driver [ 1.309317] ehci-platform: EHCI generic platform driver [ 1.314604] ehci-orion: EHCI orion driver [ 1.318649] SPEAr-ehci: EHCI SPEAr driver [ 1.322694] ehci-st: EHCI STMicroelectronics driver [ 1.327617] ehci-exynos: EHCI EXYNOS driver [ 1.331843] ehci-atmel: EHCI Atmel driver [ 1.335893] tegra-ehci: Tegra EHCI driver [ 1.339952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.346126] ohci-pci: OHCI PCI platform driver [ 1.350568] ohci-platform: OHCI generic platform driver [ 1.355840] ohci-omap3: OHCI OMAP3 driver [ 1.359884] SPEAr-ohci: OHCI SPEAr driver [ 1.363936] ohci-st: OHCI STMicroelectronics driver [ 1.368847] ohci-atmel: OHCI Atmel driver [ 1.373109] usbcore: registered new interface driver usb-storage [ 1.379901] elan_i2c 1-0015: 1-0015 supply vcc not found, using dummy regulator [ 1.387269] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.394144] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.401031] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.408171] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.414530] i2c /dev entries driver [ 1.420410] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.431823] sdhci: Secure Digital Host Controller Interface driver [ 1.438004] sdhci: Copyright(c) Pierre Ossman [ 1.442913] Synopsys Designware Multimedia Card Interface Driver [ 1.449306] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.455228] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.460995] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.465873] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.470856] mmc0: Unknown controller version (3). You may experience problems. [ 1.478094] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.542915] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.551014] ledtrig-cpu: registered to indicate activity on CPUs [ 1.557201] usbcore: registered new interface driver usbhid [ 1.562764] usbhid: USB HID core driver [ 1.568028] NET: Registered protocol family 10 [ 1.572793] Segment Routing with IPv6 [ 1.576496] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.582625] NET: Registered protocol family 17 [ 1.587072] can: controller area network core (rev 20120528 abi 9) [ 1.593315] NET: Registered protocol family 29 [ 1.597751] can: raw protocol (rev 20120528) [ 1.602016] can: broadcast manager protocol (rev 20161123 t) [ 1.607672] can: netlink gateway (rev 20130117) max_hops=1 [ 1.613280] Key type dns_resolver registered [ 1.617752] ThumbEE CPU extension supported. [ 1.622018] Registering SWP/SWPB emulation handler [ 1.631522] +3.3V_RUN: supplied by +3.3V_SYS [ 1.636725] +VDD_LED: supplied by +VDD_MUX [ 1.639004] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.639299] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.658910] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.664583] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.669228] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.673941] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.679268] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.684072] +5V_USB_HS: supplied by +5V_SYS [ 1.688586] +5V_USB_SS: supplied by +5V_SYS [ 1.693914] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.694614] mmc0: new high speed MMC card at address 0001 [ 1.695425] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.695838] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.696284] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.696717] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.702651] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.732411] +3.3V_LP0: supplied by +3.3V_SYS [ 1.737526] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.737778] elan_i2c 1-0015: failed to read report data: -121 [ 1.749278] +5V_HDMI_CON: supplied by +5V_SYS [ 1.754468] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.761199] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.771559] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.778407] panel-simple panel: panel supply power not found, using dummy regulator [ 1.787169] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.792892] mmc1: Unknown controller version (3). You may experience problems. [ 1.800161] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.806536] mmc1: Switching to 3.3V signalling voltage failed [ 1.862994] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.871154] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.876069] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.877854] elan_i2c 1-0015: invalid report id data (ff) [ 1.886378] mmc2: Unknown controller version (3). You may experience problems. [ 1.893628] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.942392] mmc1: new high speed SDIO card at address 0001 [ 1.962996] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.067715] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.074343] [drm] No driver support for vblank timestamp query. [ 2.114834] mmc2: new high speed SDHC card at address 0007 [ 2.115221] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.123663] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.123667] GPT:3014591 != 15564799 [ 2.123668] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.123669] GPT:3014591 != 15564799 [ 2.123670] GPT: Use GNU Parted to correct GPT errors. [ 2.123695] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.162807] Console: switching to colour frame buffer device 170x48 [ 2.226959] drm drm: fb0: frame buffer device [ 2.231443] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.238947] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.246703] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.255845] +1.8V_RUN_CAM: disabling [ 2.259579] +3.3V_RUN_CAM: disabling [ 2.263423] +1.2V_RUN_CAM_FRONT: disabling [ 2.267717] +1.05V_RUN_CAM_REAR: disabling [ 2.271970] +2.8V_RUN_TOUCH: disabling [ 2.275879] +2.8V_RUN_CAM_AF: disabling [ 2.279871] +1.8V_RUN_VPP_FUSE: disabling [ 2.284119] +5V_VDD_TS_SW: disabling [ 2.287691] +5V_USB_HS: disabling [ 2.290996] +5V_USB_SS: disabling [ 2.295245] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.303869] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.369774] EXT4-fs (mmcblk0p3): recovery complete [ 2.375328] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.383461] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.390152] devtmpfs: mounted [ 2.393808] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 5.791542] PM: Syncing filesystems ... done. [ 5.812456] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.820586] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.829221] Suspending console(s) (use no_console_suspend to debug) [ 5.876081] PM: suspend of devices complete after 40.004 msecs [ 5.877576] PM: late suspend of devices complete after 1.486 msecs [ 5.878514] PM: noirq suspend of devices complete after 0.933 msecs [ 5.878516] Disabling non-boot CPUs ... [ 5.955071] IRQ17 no longer affine to CPU2 [ 6.044588] Entering suspend state LP1 [ 6.044588] Suspended for 2.912 seconds [ 6.044598] Enabling non-boot CPUs ... [ 6.074420] CPU1 is up [ 6.114258] CPU2 is up [ 6.154466] CPU3 is up [ 6.154967] PM: noirq resume of devices complete after 0.496 msecs [ 6.156308] PM: early resume of devices complete after 1.023 msecs [ 6.311976] mmc1: Switching to 3.3V signalling voltage failed [ 6.562881] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 6.599477] PM: resume of devices complete after 443.163 msecs [ 6.674960] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 7.962468] PM: Syncing filesystems ... done. [ 7.982993] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.991146] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.999799] Suspending console(s) (use no_console_suspend to debug) [ 8.046752] PM: suspend of devices complete after 40.070 msecs [ 8.048173] PM: late suspend of devices complete after 1.411 msecs [ 8.049108] PM: noirq suspend of devices complete after 0.930 msecs [ 8.049110] Disabling non-boot CPUs ... [ 8.194251] Entering suspend state LP1 [ 8.194251] Suspended for 2.850 seconds [ 8.194261] Enabling non-boot CPUs ... [ 8.224570] CPU1 is up [ 8.264228] CPU2 is up [ 8.304437] CPU3 is up [ 8.304938] PM: noirq resume of devices complete after 0.496 msecs [ 8.306338] PM: early resume of devices complete after 1.085 msecs [ 8.462113] mmc1: Switching to 3.3V signalling voltage failed [ 8.712920] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 8.749608] PM: resume of devices complete after 443.261 msecs [ 8.821022] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 10.112702] PM: Syncing filesystems ... done. [ 10.132987] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.141144] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.149785] Suspending console(s) (use no_console_suspend to debug) [ 10.196819] PM: suspend of devices complete after 40.211 msecs [ 10.198113] PM: late suspend of devices complete after 1.285 msecs [ 10.199261] PM: noirq suspend of devices complete after 1.139 msecs [ 10.199263] Disabling non-boot CPUs ... [ 10.344290] Entering suspend state LP1 [ 10.344290] Suspended for 2.849 seconds [ 10.344300] Enabling non-boot CPUs ... [ 10.374361] CPU1 is up [ 10.414205] CPU2 is up [ 10.454412] CPU3 is up [ 10.454885] PM: noirq resume of devices complete after 0.468 msecs [ 10.456157] PM: early resume of devices complete after 0.958 msecs [ 10.613111] mmc1: Switching to 3.3V signalling voltage failed [ 10.872883] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 10.900865] PM: resume of devices complete after 444.698 msecs [ 10.972343] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 12.262670] PM: Syncing filesystems ... done. [ 12.284207] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.292363] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.300977] Suspending console(s) (use no_console_suspend to debug) [ 12.347870] PM: suspend of devices complete after 40.055 msecs [ 12.349335] PM: late suspend of devices complete after 1.456 msecs [ 12.350273] PM: noirq suspend of devices complete after 0.933 msecs [ 12.350275] Disabling non-boot CPUs ... [ 12.414842] IRQ17 no longer affine to CPU2 [ 12.524494] Entering suspend state LP1 [ 12.524494] Suspended for 2.819 seconds [ 12.524504] Enabling non-boot CPUs ... [ 12.554357] CPU1 is up [ 12.594207] CPU2 is up [ 12.634389] CPU3 is up [ 12.634868] PM: noirq resume of devices complete after 0.474 msecs [ 12.636258] PM: early resume of devices complete after 1.067 msecs [ 12.792912] mmc1: Switching to 3.3V signalling voltage failed [ 13.052811] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 13.080665] PM: resume of devices complete after 444.399 msecs [ 13.156289] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 14.442650] PM: Syncing filesystems ... done. [ 14.464011] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.472167] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.480782] Suspending console(s) (use no_console_suspend to debug) [ 14.527608] PM: suspend of devices complete after 39.985 msecs [ 14.528686] PM: late suspend of devices complete after 1.073 msecs [ 14.529537] PM: noirq suspend of devices complete after 0.846 msecs [ 14.529539] Disabling non-boot CPUs ... [ 14.714536] Entering suspend state LP1 [ 14.714536] Suspended for 2.809 seconds [ 14.714546] Enabling non-boot CPUs ... [ 14.744323] CPU1 is up [ 14.784152] CPU2 is up [ 14.824358] CPU3 is up [ 14.824835] PM: noirq resume of devices complete after 0.472 msecs [ 14.826102] PM: early resume of devices complete after 0.960 msecs [ 14.982963] mmc1: Switching to 3.3V signalling voltage failed [ 15.242863] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 15.270758] PM: resume of devices complete after 444.647 msecs [ 15.342246] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 16.632608] PM: Syncing filesystems ... done. [ 16.654104] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.662261] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.670878] Suspending console(s) (use no_console_suspend to debug) [ 16.718133] PM: suspend of devices complete after 40.414 msecs [ 16.719580] PM: late suspend of devices complete after 1.438 msecs [ 16.720521] PM: noirq suspend of devices complete after 0.935 msecs [ 16.720523] Disabling non-boot CPUs ... [ 16.924417] Entering suspend state LP1 [ 16.924417] Suspended for 2.789 seconds [ 16.924427] Enabling non-boot CPUs ... [ 16.954290] CPU1 is up [ 16.994112] CPU2 is up [ 17.034327] CPU3 is up [ 17.034802] PM: noirq resume of devices complete after 0.470 msecs [ 17.036213] PM: early resume of devices complete after 1.106 msecs [ 17.192081] mmc1: Switching to 3.3V signalling voltage failed [ 17.442759] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 17.479457] PM: resume of devices complete after 443.238 msecs [ 17.550857] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.842600] PM: Syncing filesystems ... done. [ 18.862897] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.871059] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.879694] Suspending console(s) (use no_console_suspend to debug) [ 18.926860] PM: suspend of devices complete after 40.342 msecs [ 18.928304] PM: late suspend of devices complete after 1.435 msecs [ 18.929244] PM: noirq suspend of devices complete after 0.935 msecs [ 18.929246] Disabling non-boot CPUs ... [ 19.094419] Entering suspend state LP1 [ 19.094419] Suspended for 2.829 seconds [ 19.094429] Enabling non-boot CPUs ... [ 19.124252] CPU1 is up [ 19.164104] CPU2 is up [ 19.204305] CPU3 is up [ 19.204785] PM: noirq resume of devices complete after 0.474 msecs [ 19.206352] PM: early resume of devices complete after 1.267 msecs [ 19.361811] mmc1: Switching to 3.3V signalling voltage failed [ 19.612746] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 19.649330] PM: resume of devices complete after 442.972 msecs [ 19.720715] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 21.022523] PM: Syncing filesystems ... done. [ 21.032844] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.041004] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.049646] Suspending console(s) (use no_console_suspend to debug) [ 21.096498] PM: suspend of devices complete after 40.030 msecs [ 21.097897] PM: late suspend of devices complete after 1.389 msecs [ 21.098824] PM: noirq suspend of devices complete after 0.923 msecs [ 21.098827] Disabling non-boot CPUs ... [ 21.264163] Entering suspend state LP1 [ 21.264163] Suspended for 2.830 seconds [ 21.264173] Enabling non-boot CPUs ... [ 21.294237] CPU1 is up [ 21.334064] CPU2 is up [ 21.374275] CPU3 is up [ 21.374748] PM: noirq resume of devices complete after 0.469 msecs [ 21.376170] PM: early resume of devices complete after 1.127 msecs [ 21.531849] mmc1: Switching to 3.3V signalling voltage failed [ 21.792786] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 21.819431] PM: resume of devices complete after 443.256 msecs [ 21.890845] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 23.192490] PM: Syncing filesystems ... done. [ 23.202874] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.211032] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.219675] Suspending console(s) (use no_console_suspend to debug) [ 23.266480] PM: suspend of devices complete after 39.981 msecs [ 23.267965] PM: late suspend of devices complete after 1.475 msecs [ 23.268901] PM: noirq suspend of devices complete after 0.931 msecs [ 23.268903] Disabling non-boot CPUs ... [ 23.434125] Entering suspend state LP1 [ 23.434125] Suspended for 2.829 seconds [ 23.434135] Enabling non-boot CPUs ... [ 23.464182] CPU1 is up [ 23.504038] CPU2 is up [ 23.544244] CPU3 is up [ 23.544719] PM: noirq resume of devices complete after 0.471 msecs [ 23.546118] PM: early resume of devices complete after 1.083 msecs [ 23.701774] mmc1: Switching to 3.3V signalling voltage failed [ 23.952680] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 23.989338] PM: resume of devices complete after 443.216 msecs [ 24.060807] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 25.362461] PM: Syncing filesystems ... done. [ 25.372845] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.381002] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.389635] Suspending console(s) (use no_console_suspend to debug) [ 25.436601] PM: suspend of devices complete after 40.141 msecs [ 25.437896] PM: late suspend of devices complete after 1.287 msecs [ 25.439034] PM: noirq suspend of devices complete after 1.129 msecs [ 25.439036] Disabling non-boot CPUs ... [ 25.614334] Entering suspend state LP1 [ 25.614334] Suspended for 2.819 seconds [ 25.614344] Enabling non-boot CPUs ... [ 25.644169] CPU1 is up [ 25.684007] CPU2 is up [ 25.724207] CPU3 is up [ 25.724685] PM: noirq resume of devices complete after 0.473 msecs [ 25.726166] PM: early resume of devices complete after 1.166 msecs [ 25.881676] mmc1: Switching to 3.3V signalling voltage failed [ 26.132715] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 26.169251] PM: resume of devices complete after 443.080 msecs [ 26.240658] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE