U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.6 MiB/s done Bytes transferred = 7468384 (71f560 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.1 MiB/s done Bytes transferred = 67943 (10967 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x71f560 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013966 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.10.0-rc5-next-20170125-148138-gf37208bc (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Jan 27 01:03:44 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt:Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c1436d40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 16 pages/cpu @eef85000 s34304 r8192 d23040 u65536 [ 0.000000] pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995700K/2097148K available (9216K kernel code, 1250K rwdata, 4180K rodata, 2048K init, 534K bss, 35912K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc1438840 (1251 kB) [ 0.000000] .bss : 0xc143a000 - 0xc14bfa30 ( 535 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000013] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000019] Switching to timer-based delay loop, resolution 1000ns [ 0.001865] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001872] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001879] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001884] Switching to timer-based delay loop, resolution 83ns [ 0.002092] Console: colour dummy device 80x30 [ 0.002108] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.002114] pid_max: default: 32768 minimum: 301 [ 0.002156] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002161] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002357] CPU: Testing write buffer coherency: ok [ 0.002479] /cpus/cpu@0 missing clock-frequency property [ 0.002494] /cpus/cpu@1 missing clock-frequency property [ 0.002509] /cpus/cpu@2 missing clock-frequency property [ 0.002524] /cpus/cpu@3 missing clock-frequency property [ 0.002529] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002609] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003973] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004206] EFI services will not be available. [ 0.004301] smp: Bringing up secondary CPUs ... [ 0.004534] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011972] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021968] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031757] smp: Brought up 1 node, 4 CPUs [ 0.031765] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031768] CPU: All CPU(s) started in SVC mode. [ 0.032316] devtmpfs: initialized [ 0.037804] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.037991] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038521] pinctrl core: initialized pinctrl subsystem [ 0.039209] NET: Registered protocol family 16 [ 0.039948] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040829] cpuidle: using governor menu [ 0.049751] No ATAGs? [ 0.049807] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.049813] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.052402] Serial: AMBA PL011 UART driver [ 0.052760] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.057941] +5V_SYS: supplied by +VDD_MUX [ 0.058037] +3.3V_SYS: supplied by +VDD_MUX [ 0.058237] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.058242] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.058273] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.058278] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.058306] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.058311] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.058339] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.058343] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.058419] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.058423] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.058452] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.058456] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.059536] vgaarb: loaded [ 0.059812] SCSI subsystem initialized [ 0.059870] libata version 3.00 loaded. [ 0.059953] usbcore: registered new interface driver usbfs [ 0.059974] usbcore: registered new interface driver hub [ 0.059997] usbcore: registered new device driver usb [ 0.061290] pps_core: LinuxPPS API ver. 1 registered [ 0.061294] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.061303] PTP clock support registered [ 0.061370] EDAC MC: Ver: 3.0.0 [ 0.061811] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.061821] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.062249] clocksource: Switched to clocksource arch_sys_counter [ 0.065422] NET: Registered protocol family 2 [ 0.065605] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.065639] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.065701] TCP: Hash tables configured (established 8192 bind 8192) [ 0.065738] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.065752] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.065808] NET: Registered protocol family 1 [ 0.065934] RPC: Registered named UNIX socket transport module. [ 0.065937] RPC: Registered udp transport module. [ 0.065940] RPC: Registered tcp transport module. [ 0.065943] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.065948] PCI: CLS 0 bytes, default 64 [ 0.066395] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.066879] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.067124] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.069862] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.070100] NFS: Registering the id_resolver key type [ 0.070110] Key type id_resolver registered [ 0.070113] Key type id_legacy registered [ 0.070130] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.070688] bounce: pool size: 64 pages [ 0.070752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.070756] io scheduler noop registered [ 0.070760] io scheduler deadline registered [ 0.070812] io scheduler cfq registered (default) [ 0.070816] io scheduler mq-deadline registered [ 0.072589] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.082118] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.082832] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.101295] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.102429] console [ttyS0] disabled [ 0.102446] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.986829] console [ttyS0] enabled [ 0.990596] SuperH (H)SCI(F) driver initialized [ 0.995464] msm_serial: driver initialized [ 0.999610] STMicroelectronics ASC driver initialized [ 1.007150] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.013685] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.020966] panel supply power not found, using dummy regulator [ 1.030315] brd: module loaded [ 1.035224] loop: module loaded [ 1.039252] as3722 4-0040: AS3722 with revision 0x1 found [ 1.049227] as3722-sd2: supplied by +5V_SYS [ 1.053644] as3722-sd3: supplied by +5V_SYS [ 1.057969] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.064189] as3722-sd4: supplied by +5V_SYS [ 1.068520] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.074261] as3722-sd5: supplied by +5V_SYS [ 1.079834] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.085566] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.091575] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.097190] as3722-ldo3: supplied by +3.3V_SYS [ 1.101634] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.109203] as3722-ldo4: supplied by +3.3V_SYS [ 1.113810] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.119816] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.124588] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.131260] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.137286] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.142055] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.148598] as3722-ldo9: supplied by +5V_SYS [ 1.153165] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.159353] as3722-ldo10: supplied by +5V_SYS [ 1.163864] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.170294] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.182720] random: fast init done [ 1.188632] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.194719] libphy: Fixed MDIO Bus: probed [ 1.199164] CAN device driver interface [ 1.203312] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.209424] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.215246] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.221166] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.228115] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.234892] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.242295] usbcore: registered new interface driver pegasus [ 1.247955] usbcore: registered new interface driver asix [ 1.253355] usbcore: registered new interface driver ax88179_178a [ 1.259442] usbcore: registered new interface driver cdc_ether [ 1.265281] usbcore: registered new interface driver smsc75xx [ 1.271027] usbcore: registered new interface driver smsc95xx [ 1.276774] usbcore: registered new interface driver net1080 [ 1.282433] usbcore: registered new interface driver cdc_subset [ 1.288346] usbcore: registered new interface driver zaurus [ 1.293928] usbcore: registered new interface driver cdc_ncm [ 1.300214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.306732] ehci-pci: EHCI PCI platform driver [ 1.311174] ehci-platform: EHCI generic platform driver [ 1.316462] ehci-orion: EHCI orion driver [ 1.320506] SPEAr-ehci: EHCI SPEAr driver [ 1.324561] ehci-st: EHCI STMicroelectronics driver [ 1.329473] ehci-exynos: EHCI EXYNOS driver [ 1.333704] ehci-atmel: EHCI Atmel driver [ 1.337749] tegra-ehci: Tegra EHCI driver [ 1.341807] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.347981] ohci-pci: OHCI PCI platform driver [ 1.352429] ohci-platform: OHCI generic platform driver [ 1.357695] ohci-omap3: OHCI OMAP3 driver [ 1.361740] SPEAr-ohci: OHCI SPEAr driver [ 1.365792] ohci-st: OHCI STMicroelectronics driver [ 1.370703] ohci-atmel: OHCI Atmel driver [ 1.374966] usbcore: registered new interface driver usb-storage [ 1.381505] mousedev: PS/2 mouse device common for all mice [ 1.387669] 1-0015 supply vcc not found, using dummy regulator [ 1.394844] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.401703] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.408604] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.415743] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.422098] i2c /dev entries driver [ 1.427977] 0-004c supply vcc not found, using dummy regulator [ 1.438012] sdhci: Secure Digital Host Controller Interface driver [ 1.444190] sdhci: Copyright(c) Pierre Ossman [ 1.449078] Synopsys Designware Multimedia Card Interface Driver [ 1.455469] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.461382] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.467141] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.472011] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.476999] mmc0: Unknown controller version (3). You may experience problems. [ 1.484243] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.552255] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.558769] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.558935] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.578204] ledtrig-cpu: registered to indicate activity on CPUs [ 1.584313] usbcore: registered new interface driver usbhid [ 1.589870] usbhid: USB HID core driver [ 1.595064] NET: Registered protocol family 10 [ 1.599811] Segment Routing with IPv6 [ 1.603492] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.609605] NET: Registered protocol family 17 [ 1.614047] can: controller area network core (rev 20120528 abi 9) [ 1.620231] NET: Registered protocol family 29 [ 1.624666] can: raw protocol (rev 20120528) [ 1.628923] can: broadcast manager protocol (rev 20161123 t) [ 1.634573] can: netlink gateway (rev 20130117) max_hops=1 [ 1.640169] Key type dns_resolver registered [ 1.644646] ThumbEE CPU extension supported. [ 1.648905] Registering SWP/SWPB emulation handler [ 1.661147] +3.3V_RUN: supplied by +3.3V_SYS [ 1.666353] +VDD_LED: supplied by +VDD_MUX [ 1.670607] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.676292] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.680935] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.685579] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.690832] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.695724] +5V_USB_HS: supplied by +5V_SYS [ 1.700249] +5V_USB_SS: supplied by +5V_SYS [ 1.705514] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.710976] +3.3V_LP0: supplied by +3.3V_SYS [ 1.714914] mmc0: new high speed MMC card at address 0001 [ 1.715544] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.716023] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.716449] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.716958] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.730320] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.749372] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.749587] elan_i2c 1-0015: failed to read report data: -121 [ 1.749985] elan_i2c 1-0015: failed to read report data: -121 [ 1.766878] +5V_HDMI_CON: supplied by +5V_SYS [ 1.771874] usb3-0 supply vbus not found, using dummy regulator [ 1.777891] usb3-1 supply vbus not found, using dummy regulator [ 1.787462] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.794259] panel supply power not found, using dummy regulator [ 1.800903] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.806724] mmc1: Unknown controller version (3). You may experience problems. [ 1.813993] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.820272] mmc1: Switching to 3.3V signalling voltage failed [ 1.882337] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.890488] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.895370] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.900331] mmc2: Unknown controller version (3). You may experience problems. [ 1.907600] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.908010] elan_i2c 1-0015: invalid report id data (ff) [ 1.961572] mmc1: new high speed SDIO card at address 0001 [ 1.982365] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.087007] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.093637] [drm] No driver support for vblank timestamp query. [ 2.134873] mmc2: new high speed SDHC card at address 0007 [ 2.135273] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.145563] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.145568] GPT:3014591 != 15564799 [ 2.145571] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.145572] GPT:3014591 != 15564799 [ 2.145574] GPT: Use GNU Parted to correct GPT errors. [ 2.145612] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.182079] Console: switching to colour frame buffer device 170x48 [ 2.246240] drm drm: fb0: frame buffer device [ 2.250724] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.258195] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.265877] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.275018] +1.8V_RUN_CAM: disabling [ 2.278749] +3.3V_RUN_CAM: disabling [ 2.282573] +1.2V_RUN_CAM_FRONT: disabling [ 2.286828] +1.05V_RUN_CAM_REAR: disabling [ 2.291079] +2.8V_RUN_TOUCH: disabling [ 2.295071] +2.8V_RUN_CAM_AF: disabling [ 2.299063] +1.8V_RUN_VPP_FUSE: disabling [ 2.303313] +5V_VDD_TS_SW: disabling [ 2.306885] +5V_USB_HS: disabling [ 2.310190] +5V_USB_SS: disabling [ 2.314420] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.323040] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.522453] EXT4-fs (mmcblk0p3): recovery complete [ 2.527240] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.535369] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.542610] devtmpfs: mounted [ 2.546250] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#