Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.159925913 -0800
+++ /tmp/foob	2017-01-24 03:28:01.163925928 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-171409-g567192f (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jan 19 21:23:58 PST 2017
+Linux version 4.10.0-rc5-next-20170123-172003-gf9dd6f6 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jan 24 03:22:09 PST 2017
 Boot CPU: AArch64 Processor [411fd070]
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -18,15 +18,15 @@
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
-Memory: 998796K/1048576K available (8508K kernel code, 958K rwdata, 4148K rodata, 1088K init, 390K bss, 33396K reserved, 16384K cma-reserved)
+Memory: 998792K/1048576K available (8508K kernel code, 960K rwdata, 4164K rodata, 1088K init, 392K bss, 33400K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
     .rodata : 0xffff0000088d0000 - 0xffff000008cf0000   (  4224 KB)
       .init : 0xffff000008cf0000 - 0xffff000008e00000   (  1088 KB)
-      .data : 0xffff000008e00000 - 0xffff000008eefa00   (   959 KB)
-       .bss : 0xffff000008eefa00 - 0xffff000008f51530   (   391 KB)
+      .data : 0xffff000008e00000 - 0xffff000008ef0200   (   961 KB)
+       .bss : 0xffff000008ef0200 - 0xffff000008f525b0   (   393 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -101,7 +101,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.852:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.684:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=46 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -168,7 +168,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-01-20 05:24:40 UTC (1484889880)
+rtc-pl031 9010000.pl031: setting system clock to 2017-01-24 11:22:53 UTC (1485256973)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.167925942 -0800
+++ /tmp/foob	2017-01-24 03:28:01.167925942 -0800
@@ -38,21 +38,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################################
-	 3.1 MiB/s
+	 ######################################################
+	 2.9 MiB/s
 done
-Bytes transferred = 7455072 (71c160 hex)
+Bytes transferred = 7458336 (71ce20 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x71c160 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x71ce20 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 19 21:20:13 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 24 03:19:06 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -71,7 +71,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1432680, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c14326c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc1434180   (1233 kB)
-       .bss : 0xc1436000 - 0xc14bb9e8   ( 535 kB)
+      .data : 0xc1300000 - 0xc14341c0   (1233 kB)
+       .bss : 0xc1436000 - 0xc14bba28   ( 535 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -305,14 +305,13 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
+mmc0: new high speed SDHC card at address aaaa
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes - going 1024x768
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
  mmcblk0: p1 p2 p3
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
@@ -320,7 +319,7 @@
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
-Console: switching to colour frame buffer device 128x48
+Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -330,7 +329,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-13 16:53:35 UTC (974134415)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-17 22:52:43 UTC (974501563)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -342,4 +341,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.439518] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.529543] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.175925969 -0800
+++ /tmp/foob	2017-01-24 03:28:01.175925969 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 #####################################################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 5537568 (547f20 hex)
+Bytes transferred = 5538416 (548270 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 392.6 KiB/s
+	 3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x547f20 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x548270 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 19 21:19:51 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 24 03:18:59 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -69,7 +69,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f100, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f240, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999924K/2096128K available (8192K kernel code, 385K rwdata, 2480K rodata, 1024K init, 368K bss, 30668K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999924K/2096128K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 368K bss, 30668K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,7 +92,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d607c0   ( 386 kB)
+      .data : 0xc0d00000 - 0xc0d60900   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe34c   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -322,7 +322,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-13 16:50:46 UTC (974134246)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-17 22:49:58 UTC (974501398)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -336,4 +336,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.739612] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.759382] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.183926000 -0800
+++ /tmp/foob	2017-01-24 03:28:01.183926000 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,21 +33,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################################
-	 3.9 MiB/s
+	 ######################################################
+	 3.3 MiB/s
 done
-Bytes transferred = 7455072 (71c160 hex)
+Bytes transferred = 7458336 (71ce20 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x71c160 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x71ce20 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 19 21:20:13 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 24 03:19:06 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -66,7 +66,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1432680, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c14326c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -89,8 +89,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc1434180   (1233 kB)
-       .bss : 0xc1436000 - 0xc14bb9e8   ( 535 kB)
+      .data : 0xc1300000 - 0xc14341c0   (1233 kB)
+       .bss : 0xc1436000 - 0xc14bba28   ( 535 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -212,8 +212,6 @@
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-gpio gpiochip1: (as3722-gpio): could not create pin range
-as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -307,8 +305,11 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
 +USB0_VBUS_SW: supplied by +5V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: supplied by +3.3V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
@@ -325,56 +326,6 @@
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
-------------[ cut here ]------------
-WARNING: CPU: 2 PID: 92 at drivers/base/dd.c:349 driver_probe_device+0x288/0x2c0
-Modules linked in:
-CPU: 2 PID: 92 Comm: kworker/2:1 Not tainted 4.10.0-rc4-next-20170120-146976-g567192f #1
-Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
-Workqueue: events deferred_probe_work_func
-[<c030fb48>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059fb14>] (dump_stack+0x84/0xa4)
-[<c059fb14>] (dump_stack) from [<c0341b48>] (__warn+0xd4/0x100)
-[<c0341b48>] (__warn) from [<c0341b94>] (warn_slowpath_null+0x20/0x28)
-[<c0341b94>] (warn_slowpath_null) from [<c07e4d18>] (driver_probe_device+0x288/0x2c0)
-[<c07e4d18>] (driver_probe_device) from [<c07e3258>] (bus_for_each_drv+0x44/0x8c)
-[<c07e3258>] (bus_for_each_drv) from [<c07e4a08>] (__device_attach+0x9c/0x100)
-[<c07e4a08>] (__device_attach) from [<c07e40f0>] (bus_probe_device+0x84/0x8c)
-[<c07e40f0>] (bus_probe_device) from [<c07e4524>] (deferred_probe_work_func+0x60/0x8c)
-[<c07e4524>] (deferred_probe_work_func) from [<c0357094>] (process_one_work+0x134/0x33c)
-[<c0357094>] (process_one_work) from [<c03572c4>] (process_scheduled_works+0x28/0x38)
-[<c03572c4>] (process_scheduled_works) from [<c03574ec>] (worker_thread+0x218/0x4f0)
-[<c03574ec>] (worker_thread) from [<c035c864>] (kthread+0xfc/0x134)
-[<c035c864>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace 252447523932eff1 ]---
-as3722-sd2: supplied by +5V_SYS
-as3722-sd3: supplied by +5V_SYS
-as3722-sd4: supplied by +5V_SYS
-as3722-sd5: supplied by +5V_SYS
-as3722-ldo0: supplied by +1.35V_LP0(sd2)
-as3722-ldo2: supplied by +1.8V_VDDIO
-as3722-ldo3: supplied by +3.3V_SYS
-as3722-ldo4: supplied by +3.3V_SYS
-as3722-ldo5: supplied by +1.8V_VDDIO
-+VDDIO_SDMMC3: bypassed regulator has no supply!
-+VDDIO_SDMMC3: failed to get the current voltage(-517)
-as3722-regulator as3722-regulator: regulator 13 register failed -517
-tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
-tegra-ahci 70027000.sata: Failed to get regulators
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_LP0: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
-tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
@@ -400,6 +351,12 @@
 scsi host1: tegra-ahci
 ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
 ata2: DUMMY
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
@@ -426,12 +383,12 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 1-byte config write to 0000:00:02.0 offset 0xc may corrupt adjacent RW1C bits
 PCI: bus0: Fast back to back transfers disabled
 pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
@@ -471,7 +428,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b58000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b57000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -484,7 +441,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:11 UTC (946684931)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.191926031 -0800
+++ /tmp/foob	2017-01-24 03:28:01.191926031 -0800
@@ -34,7 +34,7 @@
 	 #####################################################
 	 3.9 MiB/s
 done
-Bytes transferred = 5537568 (547f20 hex)
+Bytes transferred = 5538416 (548270 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -45,7 +45,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x547f20 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x548270 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -54,7 +54,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 19 21:19:51 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 24 03:18:59 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -64,7 +64,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f100, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f240, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -77,7 +77,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999804K/2096128K available (8192K kernel code, 385K rwdata, 2480K rodata, 1024K init, 368K bss, 30788K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999804K/2096128K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 368K bss, 30788K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -87,7 +87,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d607c0   ( 386 kB)
+      .data : 0xc0d00000 - 0xc0d60900   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe34c   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -206,8 +206,6 @@
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-gpio gpiochip1: (as3722-gpio): could not create pin range
-as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -306,8 +304,11 @@
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
 +USB0_VBUS_SW: supplied by +5V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: supplied by +3.3V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
@@ -323,38 +324,6 @@
 as3722-sd4: supplied by +5V_SYS
 as3722-sd5: supplied by +5V_SYS
 as3722-ldo0: supplied by +1.35V_LP0(sd2)
-as3722-ldo2: supplied by +1.8V_VDDIO
-as3722-ldo3: supplied by +3.3V_SYS
-as3722-ldo4: supplied by +3.3V_SYS
-as3722-ldo5: supplied by +1.8V_VDDIO
-+VDDIO_SDMMC3: bypassed regulator has no supply!
-+VDDIO_SDMMC3: failed to get the current voltage(-517)
-as3722-regulator as3722-regulator: regulator 13 register failed -517
-tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
-tegra-ahci 70027000.sata: Failed to get regulators
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-tegra-xusb 70090000.usb: Failed to get supply 'avddio-pex': -517
-tegra-xusb 70090000.usb: failed to get regulators: -517
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_LP0: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
-tegra-hdmi 54280000.hdmi: failed to get PLL regulator
-as3722-sd2: supplied by +5V_SYS
-as3722-sd3: supplied by +5V_SYS
-as3722-sd4: supplied by +5V_SYS
-as3722-sd5: supplied by +5V_SYS
-as3722-ldo0: supplied by +1.35V_LP0(sd2)
 as3722-ldo1: supplied by +3.3V_RUN
 as3722-ldo2: supplied by +1.8V_VDDIO
 as3722-ldo3: supplied by +3.3V_SYS
@@ -363,6 +332,7 @@
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo9: supplied by +5V_SYS
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
 as3722-ldo10: supplied by +5V_SYS
@@ -375,6 +345,12 @@
 scsi host1: tegra-ahci
 ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
 ata2: DUMMY
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
 tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
 tegra-xusb 70090000.usb: xHCI Host Controller
 tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3
@@ -394,11 +370,11 @@
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
-ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
@@ -433,7 +409,6 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -458,13 +433,14 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 394
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0afb000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0af7000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
+[drm] Cannot find any crtc or sizes - going 1024x768
+ mmcblk1: p1 p2 p3
+Console: switching to colour frame buffer device 128x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.199926058 -0800
+++ /tmp/foob	2017-01-24 03:28:01.199926058 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -41,21 +41,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################################
-	 3.5 MiB/s
+	 ######################################################
+	 3.6 MiB/s
 done
-Bytes transferred = 7455072 (71c160 hex)
+Bytes transferred = 7458336 (71ce20 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x71c160 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x71ce20 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -63,7 +63,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 19 21:20:13 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 24 03:19:06 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -75,7 +75,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c1432680, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c14326c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -98,8 +98,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc1434180   (1233 kB)
-       .bss : 0xc1436000 - 0xc14bb9e8   ( 535 kB)
+      .data : 0xc1300000 - 0xc14341c0   (1233 kB)
+       .bss : 0xc1436000 - 0xc14bba28   ( 535 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -218,8 +218,6 @@
 brd: module loaded
 loop: module loaded
 as3722 4-0040: AS3722 with revision 0x1 found
-gpio gpiochip1: (as3722-gpio): could not create pin range
-as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -306,6 +304,7 @@
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20161123 t)
@@ -313,51 +312,21 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
 +5V_VDD_TS_SW: supplied by +5V_SYS
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 +5V_HDMI_CON: supplied by +5V_SYS
 usb3-0 supply vbus not found, using dummy regulator
 usb3-1 supply vbus not found, using dummy regulator
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
-tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
-panel supply power not found, using dummy regulator
-------------[ cut here ]------------
-WARNING: CPU: 3 PID: 97 at drivers/base/dd.c:349 driver_probe_device+0x288/0x2c0
-Modules linked in:
-CPU: 3 PID: 97 Comm: kworker/3:2 Not tainted 4.10.0-rc4-next-20170120-146976-g567192f #1
-Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
-Workqueue: events deferred_probe_work_func
-[<c030fb48>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059fb14>] (dump_stack+0x84/0xa4)
-[<c059fb14>] (dump_stack) from [<c0341b48>] (__warn+0xd4/0x100)
-[<c0341b48>] (__warn) from [<c0341b94>] (warn_slowpath_null+0x20/0x28)
-[<c0341b94>] (warn_slowpath_null) from [<c07e4d18>] (driver_probe_device+0x288/0x2c0)
-[<c07e4d18>] (driver_probe_device) from [<c07e3258>] (bus_for_each_drv+0x44/0x8c)
-[<c07e3258>] (bus_for_each_drv) from [<c07e4a08>] (__device_attach+0x9c/0x100)
-[<c07e4a08>] (__device_attach) from [<c07e40f0>] (bus_probe_device+0x84/0x8c)
-[<c07e40f0>] (bus_probe_device) from [<c07e4524>] (deferred_probe_work_func+0x60/0x8c)
-[<c07e4524>] (deferred_probe_work_func) from [<c0357094>] (process_one_work+0x134/0x33c)
-[<c0357094>] (process_one_work) from [<c03572c4>] (process_scheduled_works+0x28/0x38)
-[<c03572c4>] (process_scheduled_works) from [<c03574ec>] (worker_thread+0x218/0x4f0)
-[<c03574ec>] (worker_thread) from [<c035c864>] (kthread+0xfc/0x134)
-[<c035c864>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace ebb586daa5ca08d5 ]---
-sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_PANEL: supplied by +3.3V_RUN
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-+1.8V_RUN_CAM: supplied by +3.3V_RUN
-+VDDIO_SDMMC3: supplied by +3.3V_RUN
-+1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-+3.3V_LP0: supplied by +3.3V_SYS
-elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
@@ -369,15 +338,15 @@
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc2: Invalid maximum block size, assuming 512 bytes
-elan_i2c 1-0015: invalid report id data (ff)
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc2: new high speed SDHC card at address 0007
@@ -392,7 +361,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 01:13:44 UTC (946689224)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.207926089 -0800
+++ /tmp/foob	2017-01-24 03:28:01.207926089 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -38,11 +38,13 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################################################################
+	 ##############EHCI timed out on TD - token=0x8008d80
+T EHCI timed out on TD - token=0x8008d80
+T ###################################################
 	 #####################################################
-	 3.6 MiB/s
+	 399.4 KiB/s
 done
-Bytes transferred = 5537568 (547f20 hex)
+Bytes transferred = 5538416 (548270 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -53,7 +55,7 @@
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x547f20 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x548270 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -62,7 +64,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 19 21:19:51 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 24 03:18:59 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -73,7 +75,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0d5f100, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f240, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -86,7 +88,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2000820K/2097148K available (8192K kernel code, 385K rwdata, 2480K rodata, 1024K init, 368K bss, 30792K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 2000820K/2097148K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 368K bss, 30792K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -96,7 +98,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d607c0   ( 386 kB)
+      .data : 0xc0d00000 - 0xc0d60900   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe34c   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -212,8 +214,6 @@
 panel supply power not found, using dummy regulator
 loop: module loaded
 as3722 4-0040: AS3722 with revision 0x1 found
-gpio gpiochip1: (as3722-gpio): could not create pin range
-as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -296,14 +296,14 @@
 Segment Routing with IPv6
 mip6: Mobile IPv6
 mmc0: new high speed MMC card at address 0001
-sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
-NET: Registered protocol family 15
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
@@ -317,29 +317,21 @@
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
 +5V_VDD_TS_SW: supplied by +5V_SYS
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 +5V_HDMI_CON: supplied by +5V_SYS
 usb3-0 supply vbus not found, using dummy regulator
 usb3-1 supply vbus not found, using dummy regulator
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
-tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
-panel supply power not found, using dummy regulator
-tegra-xusb 70090000.usb: Failed to get supply 'avdd-usb': -517
-tegra-xusb 70090000.usb: failed to get regulators: -517
-sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_PANEL: supplied by +3.3V_RUN
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-+1.8V_RUN_CAM: supplied by +3.3V_RUN
-+VDDIO_SDMMC3: supplied by +3.3V_RUN
-+1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-+3.3V_LP0: supplied by +3.3V_SYS
 tegra-sor 54540000.sor: failed to probe output: -517
 panel supply power not found, using dummy regulator
 tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
@@ -365,10 +357,10 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
 GPT:Primary header alternate_lba != Alt. header my_lba
@@ -381,7 +373,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 01:13:01 UTC (946689181)
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -400,6 +392,7 @@
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
+usb 1-3: new high-speed USB device number 3 using tegra-xusb
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.983657] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.215926119 -0800
+++ /tmp/foob	2017-01-24 03:28:01.215926119 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800588 us
+Bootloader-Cpu Init at (time stamp): 1800536 us
 
 Pinmux changes applied in kernel way
 
@@ -59,23 +59,23 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 3 us
+Board Id Read Time: 4 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800562  us
-Bootloader (AosInit) time: 734344 us
-Bootloader Main Init time: 180362 us
-BlockDevMgrInit time: 157529 us
+Miscellaneous avp time: 1800509  us
+Bootloader (AosInit) time: 733485 us
+Bootloader Main Init time: 180206 us
+BlockDevMgrInit time: 157538 us
 PartMgrInit time: 8 us
-StorMgrInit time: 31 us
-FsMgrInit time: 2 us
-Partition Table load: 76698 us 
-Display init time: 574723 us
-Kernel read time: 376 msec
+StorMgrInit time: 30 us
+FsMgrInit time: 3 us
+Partition Table load: 77092 us 
+Display init time: 574484 us
+Kernel read time: 378 msec
 Load Kernel Size:   16304128 Bytes
-Bl Kernel ReadSpeed: 43362000 Bytes/sec
-Pre-Kernel Jump time: 1740984 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5845087 us
+Bl Kernel ReadSpeed: 43132000 Bytes/sec
+Pre-Kernel Jump time: 1740792 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5842696 us
 Booting Linux on physical CPU 0x0
 Linux version 4.8.0-239303-g3477d16 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Oct 7 01:12:37 PDT 2016
 Boot CPU: AArch64 Processor [4e0f0000]
@@ -184,7 +184,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(1.147:1): initialized
+audit: type=2000 audit(1.151:1): initialized
 workingset: timestamp_bits=46 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -251,11 +251,10 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 +VDD_LED: supplied by +VDD_MUX
-+5V_USB_HS: supplied by +5V_SYS
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
++5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
@@ -273,6 +272,9 @@
 Freeing unused kernel memory: 960K (ffff800000c00000 - ffff800000cf0000)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.223926148 -0800
+++ /tmp/foob	2017-01-24 03:28:01.223926148 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -46,10 +46,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################################
-	 4.1 MiB/s
+	 ######################################################
+	 4 MiB/s
 done
-Bytes transferred = 7455072 (71c160 hex)
+Bytes transferred = 7458336 (71ce20 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -60,7 +60,7 @@
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x71c160 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x71ce20 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -68,7 +68,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 19 21:20:13 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 24 03:19:06 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -78,7 +78,7 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c1432680, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c14326c0, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -101,8 +101,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc1434180   (1233 kB)
-       .bss : 0xc1436000 - 0xc14bb9e8   ( 535 kB)
+      .data : 0xc1300000 - 0xc14341c0   (1233 kB)
+       .bss : 0xc1436000 - 0xc14bba28   ( 535 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -337,14 +337,14 @@
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 04:22:37 UTC (1423196557)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 22:18:59 UTC (1423261139)
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
@@ -352,8 +352,8 @@
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 random: fast init done
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.231926178 -0800
+++ /tmp/foob	2017-01-24 03:28:01.235926193 -0800
@@ -45,20 +45,20 @@
 	 #################################################################
 	 #################################################################
 	 #####################################################
-	 4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 5537568 (547f20 hex)
+Bytes transferred = 5538416 (548270 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 2.9 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x547f20 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x548270 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -67,7 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 19 21:19:51 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 24 03:18:59 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -76,7 +76,7 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0d5f100, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0d5f240, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -89,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 960744K/1048576K available (8192K kernel code, 385K rwdata, 2480K rodata, 1024K init, 368K bss, 22296K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 960744K/1048576K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 368K bss, 22296K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,7 +99,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d607c0   ( 386 kB)
+      .data : 0xc0d00000 - 0xc0d60900   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe34c   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -347,21 +347,19 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 04:21:05 UTC (1423196465)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 22:17:26 UTC (1423261046)
 ALSA device list:
   #0: tegra-trimslice
  mmcblk1: p1 p2
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-random: fast init done
-asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+random: fast init done
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    2.532719] usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.239926208 -0800
+++ /tmp/foob	2017-01-24 03:28:01.239926208 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 789433 us
-Basic modules init took 349230 us
-Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 15783 us
-Carveout took 252727 us
-CPU initialization took 92323 us
-Total time taken by TegraBoot 710063 us
+Tegraboot started after 755035 us
+Basic modules init took 348679 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14575 us
+Carveout took 252729 us
+CPU initialization took 92362 us
+Total time taken by TegraBoot 708345 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.629] LPDDR4 Training: Number of tables = 10
+64b[0001.594] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-15137280 bytes read in 800 ms (18 MiB/s)
+15139328 bytes read in 799 ms (18.1 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44882 bytes read in 460 ms (94.7 KiB/s)
+44882 bytes read in 461 ms (94.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 496 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-171409-g567192f (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jan 19 21:23:58 PST 2017
+Linux version 4.10.0-rc5-next-20170123-172003-gf9dd6f6 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jan 24 03:22:09 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -161,15 +161,15 @@
 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2977776K/3131392K available (8508K kernel code, 958K rwdata, 4148K rodata, 1088K init, 390K bss, 137232K reserved, 16384K cma-reserved)
+Memory: 2977772K/3131392K available (8508K kernel code, 960K rwdata, 4164K rodata, 1088K init, 392K bss, 137236K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
     .rodata : 0xffff0000088d0000 - 0xffff000008cf0000   (  4224 KB)
       .init : 0xffff000008cf0000 - 0xffff000008e00000   (  1088 KB)
-      .data : 0xffff000008e00000 - 0xffff000008eefa00   (   959 KB)
-       .bss : 0xffff000008eefa00 - 0xffff000008f51530   (   391 KB)
+      .data : 0xffff000008e00000 - 0xffff000008ef0200   (   961 KB)
+       .bss : 0xffff000008ef0200 - 0xffff000008f525b0   (   393 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -254,7 +254,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 808c2000
+kvm [1]: IDMAP page: 808c3000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -343,6 +343,6 @@
 devtmpfs: mounted
 Freeing unused kernel memory: 1088K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job contr[    1.349942] random: fast init done
-ol in this shell
+bash: no job control in th[    1.351429] random: fast init done
+is shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.247926237 -0800
+++ /tmp/foob	2017-01-24 03:28:01.247926237 -0800
@@ -1,5 +1,4 @@
-071]
-efi: Getting EFI parameters from FDT:
+ters from FDT:
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x00000000f5400000
 earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
@@ -18,15 +17,15 @@
 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2831960K/2988032K available (8508K kernel code, 958K rwdata, 4148K rodata, 1088K init, 390K bss, 139688K reserved, 16384K cma-reserved)
+Memory: 2831960K/2988032K available (8508K kernel code, 960K rwdata, 4164K rodata, 1088K init, 392K bss, 139688K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
     .rodata : 0xffff0000088d0000 - 0xffff000008cf0000   (  4224 KB)
       .init : 0xffff000008cf0000 - 0xffff000008e00000   (  1088 KB)
-      .data : 0xffff000008e00000 - 0xffff000008eefa00   (   959 KB)
-       .bss : 0xffff000008eefa00 - 0xffff000008f51530   (   391 KB)
+      .data : 0xffff000008e00000 - 0xffff000008ef0200   (   961 KB)
+       .bss : 0xffff000008ef0200 - 0xffff000008f525b0   (   393 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -55,7 +54,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0xbe78: expected 0x2004f400
+boot misc3 0xfc60: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -68,7 +67,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-171409-g567192f (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jan 19 21:23:58 PST 2017
+Linux version 4.10.0-rc5-next-20170123-172003-gf9dd6f6 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jan 24 03:22:09 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -89,15 +88,15 @@
 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2831960K/2988032K available (8508K kernel code, 958K rwdata, 4148K rodata, 1088K init, 390K bss, 139688K reserved, 16384K cma-reserved)
+Memory: 2831960K/2988032K available (8508K kernel code, 960K rwdata, 4164K rodata, 1088K init, 392K bss, 139688K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
     .rodata : 0xffff0000088d0000 - 0xffff000008cf0000   (  4224 KB)
       .init : 0xffff000008cf0000 - 0xffff000008e00000   (  1088 KB)
-      .data : 0xffff000008e00000 - 0xffff000008eefa00   (   959 KB)
-       .bss : 0xffff000008eefa00 - 0xffff000008f51530   (   391 KB)
+      .data : 0xffff000008e00000 - 0xffff000008ef0200   (   961 KB)
+       .bss : 0xffff000008ef0200 - 0xffff000008f525b0   (   393 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -126,7 +125,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0xbe78: expected 0x2004f400
+boot misc3 0xfc60: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -204,9 +203,9 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 Unpacking initramfs...
-Freeing initrd memory: 2364K
+Freeing initrd memory: 2360K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 808c2000
+kvm [1]: IDMAP page: 808c3000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -214,7 +213,7 @@
 kvm [1]: virtual timer IRQ4
 futex hash table entries: 1024 (order: 5, 131072 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.335:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.319:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=46 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -305,7 +304,7 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2000-10-31 10:51:57 UTC (972989517)
+max77686-rtc max77620-rtc: setting system clock to 2000-11-04 16:50:05 UTC (973356605)
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.251926252 -0800
+++ /tmp/foob	2017-01-24 03:28:01.255926268 -0800
@@ -38,10 +38,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################################
-	 3.2 MiB/s
+	 ######################################################
+	 3.3 MiB/s
 done
-Bytes transferred = 7455072 (71c160 hex)
+Bytes transferred = 7458336 (71ce20 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -52,7 +52,7 @@
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x71c160 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x71ce20 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 19 21:20:13 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 24 03:19:06 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -70,7 +70,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c1432680, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c14326c0, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc1434180   (1233 kB)
-       .bss : 0xc1436000 - 0xc14bb9e8   ( 535 kB)
+      .data : 0xc1300000 - 0xc14341c0   (1233 kB)
+       .bss : 0xc1436000 - 0xc14bba28   ( 535 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -203,8 +203,6 @@
 io scheduler deadline registered
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
-tegra-pcie 3000.pcie-controller: 2x3 configuration
-tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
@@ -220,6 +218,8 @@
 tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -315,8 +315,8 @@
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 Primary GPT is invalid, using alternate GPT.
-tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
  mmcblk1: p1 p2 p3 p4 p5
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -396,5 +396,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.103574] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.093593] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-24 03:28:01.259926282 -0800
+++ /tmp/foob	2017-01-24 03:28:01.263926297 -0800
@@ -37,9 +37,9 @@
 	 #################################################################
 	 #################################################################
 	 #####################################################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 5537568 (547f20 hex)
+Bytes transferred = 5538416 (548270 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -50,7 +50,7 @@
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x547f20 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x548270 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 19 21:19:51 PST 2017
+Linux version 4.10.0-rc5-next-20170123-147570-gf9dd6f6 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 24 03:18:59 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -68,7 +68,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f100, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f240, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -81,7 +81,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999844K/2096128K available (8192K kernel code, 385K rwdata, 2480K rodata, 1024K init, 368K bss, 30748K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999844K/2096128K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 368K bss, 30748K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,7 +91,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d607c0   ( 386 kB)
+      .data : 0xc0d00000 - 0xc0d60900   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe34c   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -198,7 +198,6 @@
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 io scheduler mq-deadline registered
-tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
@@ -214,6 +213,7 @@
 tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
+tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
@@ -391,4 +391,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.350514] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.390130] usb 2-1: new high-speed USB device number 2 using tegra-ehci
