U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.9 MiB/s done Bytes transferred = 7455072 (71c160 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.8 MiB/s done Bytes transferred = 67133 (1063d hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x71c160 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8301363c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.10.0-rc4-next-20170120-146976-g567192f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 19 21:20:13 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c1432680, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 16 pages/cpu @eef86000 s34304 r8192 d23040 u65536 [ 0.000000] pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994700K/2096128K available (9216K kernel code, 1232K rwdata, 4176K rodata, 2048K init, 534K bss, 35892K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc1434180 (1233 kB) [ 0.000000] .bss : 0xc1436000 - 0xc14bb9e8 ( 535 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000032] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000048] Switching to timer-based delay loop, resolution 1000ns [ 0.005612] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005631] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005651] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005666] Switching to timer-based delay loop, resolution 83ns [ 0.006124] Console: colour dummy device 80x30 [ 0.006158] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.006176] pid_max: default: 32768 minimum: 301 [ 0.006277] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006289] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006766] CPU: Testing write buffer coherency: ok [ 0.007020] /cpus/cpu@0 missing clock-frequency property [ 0.007063] /cpus/cpu@1 missing clock-frequency property [ 0.007105] /cpus/cpu@2 missing clock-frequency property [ 0.007148] /cpus/cpu@3 missing clock-frequency property [ 0.007162] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007364] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.011290] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.011978] EFI services will not be available. [ 0.012214] smp: Bringing up secondary CPUs ... [ 0.012712] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015729] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.025734] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035276] smp: Brought up 1 node, 4 CPUs [ 0.035297] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.035307] CPU: All CPU(s) started in SVC mode. [ 0.036790] devtmpfs: initialized [ 0.052716] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.053112] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.054458] pinctrl core: initialized pinctrl subsystem [ 0.056174] NET: Registered protocol family 16 [ 0.058103] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.060679] cpuidle: using governor menu [ 0.087557] No ATAGs? [ 0.087683] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.087699] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.094389] Serial: AMBA PL011 UART driver [ 0.110414] +5V_SYS: supplied by +VDD_MUX [ 0.110691] +3.3V_SYS: supplied by +VDD_MUX [ 0.111275] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.111292] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.111384] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.111399] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.111566] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.111581] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.111670] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.111685] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.111774] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.111788] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.111878] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.111892] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.115137] vgaarb: loaded [ 0.115943] SCSI subsystem initialized [ 0.116103] libata version 3.00 loaded. [ 0.116342] usbcore: registered new interface driver usbfs [ 0.116399] usbcore: registered new interface driver hub [ 0.116461] usbcore: registered new device driver usb [ 0.119921] pps_core: LinuxPPS API ver. 1 registered [ 0.119932] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.119959] PTP clock support registered [ 0.120154] EDAC MC: Ver: 3.0.0 [ 0.123040] clocksource: Switched to clocksource arch_sys_counter [ 0.132384] NET: Registered protocol family 2 [ 0.132873] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.132973] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.133178] TCP: Hash tables configured (established 8192 bind 8192) [ 0.133261] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.133304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.133447] NET: Registered protocol family 1 [ 0.133733] RPC: Registered named UNIX socket transport module. [ 0.133744] RPC: Registered udp transport module. [ 0.133753] RPC: Registered tcp transport module. [ 0.133762] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.133774] PCI: CLS 0 bytes, default 64 [ 0.134970] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.136289] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.136886] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.144987] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.145675] NFS: Registering the id_resolver key type [ 0.145701] Key type id_resolver registered [ 0.145710] Key type id_legacy registered [ 0.145753] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.147302] bounce: pool size: 64 pages [ 0.147478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.147490] io scheduler noop registered [ 0.147500] io scheduler deadline registered [ 0.147656] io scheduler cfq registered (default) [ 0.147667] io scheduler mq-deadline registered [ 0.152741] usb2-0 supply vbus not found, using dummy regulator [ 0.152862] usb2-1 supply vbus not found, using dummy regulator [ 0.153272] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.164524] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.164580] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.170670] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 0.180385] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.182449] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.234645] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.237322] console [ttyS0] disabled [ 0.237358] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.125055] console [ttyS0] enabled [ 1.129368] SuperH (H)SCI(F) driver initialized [ 1.134935] msm_serial: driver initialized [ 1.139213] STMicroelectronics ASC driver initialized [ 1.145145] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.154393] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.169772] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.188366] brd: module loaded [ 1.196616] loop: module loaded [ 1.200939] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.209216] as3722 4-0040: AS3722 with revision 0x1 found [ 1.217260] gpio gpiochip1: (as3722-gpio): could not create pin range [ 1.223724] as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517 [ 1.234759] as3722-sd2: supplied by +5V_SYS [ 1.239368] as3722-sd3: supplied by +5V_SYS [ 1.243774] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.250114] as3722-sd4: supplied by +5V_SYS [ 1.254738] as3722-sd5: supplied by +5V_SYS [ 1.260716] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.266789] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.272967] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.278861] as3722-ldo3: supplied by +3.3V_SYS [ 1.283356] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.291108] as3722-ldo4: supplied by +3.3V_SYS [ 1.295783] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.301978] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.306826] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.313744] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.319396] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.325592] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.338215] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.357606] random: fast init done [ 1.361197] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.369023] libphy: Fixed MDIO Bus: probed [ 1.374120] CAN device driver interface [ 1.378901] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.386007] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.391831] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.397816] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.404782] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.414065] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.421495] usbcore: registered new interface driver pegasus [ 1.427213] usbcore: registered new interface driver asix [ 1.432638] usbcore: registered new interface driver ax88179_178a [ 1.438771] usbcore: registered new interface driver cdc_ether [ 1.444664] usbcore: registered new interface driver smsc75xx [ 1.450451] usbcore: registered new interface driver smsc95xx [ 1.456239] usbcore: registered new interface driver net1080 [ 1.461926] usbcore: registered new interface driver cdc_subset [ 1.467887] usbcore: registered new interface driver zaurus [ 1.473517] usbcore: registered new interface driver cdc_ncm [ 1.479385] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.486820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.493354] ehci-pci: EHCI PCI platform driver [ 1.497831] ehci-platform: EHCI generic platform driver [ 1.503283] ehci-orion: EHCI orion driver [ 1.507429] SPEAr-ehci: EHCI SPEAr driver [ 1.511580] ehci-st: EHCI STMicroelectronics driver [ 1.516610] ehci-exynos: EHCI EXYNOS driver [ 1.520956] ehci-atmel: EHCI Atmel driver [ 1.525125] tegra-ehci: Tegra EHCI driver [ 1.531964] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.537394] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.545175] tegra-ehci 7d004000.usb: irq 354, io mem 0x7d004000 [ 1.573067] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.579778] hub 1-0:1.0: USB hub found [ 1.583582] hub 1-0:1.0: 1 port detected [ 1.588038] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.594257] ohci-pci: OHCI PCI platform driver [ 1.598736] ohci-platform: OHCI generic platform driver [ 1.604152] ohci-omap3: OHCI OMAP3 driver [ 1.608297] SPEAr-ohci: OHCI SPEAr driver [ 1.612446] ohci-st: OHCI STMicroelectronics driver [ 1.617476] ohci-atmel: OHCI Atmel driver [ 1.622272] usbcore: registered new interface driver usb-storage [ 1.629863] mousedev: PS/2 mouse device common for all mice [ 1.638418] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.645306] as3722-rtc as3722-rtc: RTC interrupt 377 [ 1.653542] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.660700] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.667444] i2c /dev entries driver [ 1.677852] 0-004c supply vcc not found, using dummy regulator [ 1.693696] sdhci: Secure Digital Host Controller Interface driver [ 1.699867] sdhci: Copyright(c) Pierre Ossman [ 1.705885] Synopsys Designware Multimedia Card Interface Driver [ 1.713085] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.719502] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.724411] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.729528] mmc0: Unknown controller version (3). You may experience problems. [ 1.736837] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.803061] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.812457] ledtrig-cpu: registered to indicate activity on CPUs [ 1.818864] usbcore: registered new interface driver usbhid [ 1.824449] usbhid: USB HID core driver [ 1.832204] NET: Registered protocol family 10 [ 1.837531] Segment Routing with IPv6 [ 1.841242] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.847716] NET: Registered protocol family 17 [ 1.852160] can: controller area network core (rev 20120528 abi 9) [ 1.858398] NET: Registered protocol family 29 [ 1.862837] can: raw protocol (rev 20120528) [ 1.867118] can: broadcast manager protocol (rev 20161123 t) [ 1.872774] can: netlink gateway (rev 20130117) max_hops=1 [ 1.878560] Key type dns_resolver registered [ 1.883360] ThumbEE CPU extension supported. [ 1.887631] Registering SWP/SWPB emulation handler [ 1.908099] +USB0_VBUS_SW: supplied by +5V_SYS [ 1.913284] +5V_USB_HS: supplied by +5V_SYS [ 1.919874] +5V_HDMI_CON: supplied by +5V_SYS [ 1.924782] +5V_SATA: supplied by +5V_SYS [ 1.929305] +12V_SATA: supplied by +VDD_MUX [ 1.935459] usb2-0 supply vbus not found, using dummy regulator [ 1.941528] usb2-1 supply vbus not found, using dummy regulator [ 1.947736] usb3-0 supply vbus not found, using dummy regulator [ 1.952523] mmc0: new high speed MMC card at address 0001 [ 1.953924] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.954972] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.956085] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.956904] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 1.959692] mmcblk0: p1 [ 1.985181] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 1.991768] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.003193] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.014268] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.021369] ------------[ cut here ]------------ [ 2.026041] WARNING: CPU: 2 PID: 92 at drivers/base/dd.c:349 driver_probe_device+0x288/0x2c0 [ 2.034498] Modules linked in: [ 2.037565] CPU: 2 PID: 92 Comm: kworker/2:1 Not tainted 4.10.0-rc4-next-20170120-146976-g567192f #1 [ 2.046688] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 2.052960] Workqueue: events deferred_probe_work_func [ 2.058127] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.065890] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 2.073118] [] (dump_stack) from [] (__warn+0xd4/0x100) [ 2.080093] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 2.087679] [] (warn_slowpath_null) from [] (driver_probe_device+0x288/0x2c0) [ 2.096559] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.105095] [] (bus_for_each_drv) from [] (__device_attach+0x9c/0x100) [ 2.113356] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [ 2.121535] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x8c) [ 2.130506] [] (deferred_probe_work_func) from [] (process_one_work+0x134/0x33c) [ 2.139647] [] (process_one_work) from [] (process_scheduled_works+0x28/0x38) [ 2.148528] [] (process_scheduled_works) from [] (worker_thread+0x218/0x4f0) [ 2.157325] [] (worker_thread) from [] (kthread+0xfc/0x134) [ 2.164651] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 2.171921] ---[ end trace 252447523932eff1 ]--- [ 2.181337] as3722-sd2: supplied by +5V_SYS [ 2.185986] as3722-sd3: supplied by +5V_SYS [ 2.190517] as3722-sd4: supplied by +5V_SYS [ 2.195109] as3722-sd5: supplied by +5V_SYS [ 2.201062] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.207583] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.213301] as3722-ldo3: supplied by +3.3V_SYS [ 2.218669] as3722-ldo4: supplied by +3.3V_SYS [ 2.223533] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.228532] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 2.234231] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 2.240409] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 2.252121] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 [ 2.258754] tegra-ahci 70027000.sata: Failed to get regulators [ 2.268093] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.273531] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.281351] tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000 [ 2.313165] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.320112] hub 2-0:1.0: USB hub found [ 2.323965] hub 2-0:1.0: 1 port detected [ 2.330245] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.335276] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.341766] +3.3V_RUN: supplied by +3.3V_SYS [ 2.348425] +3.3V_LP0: supplied by +3.3V_SYS [ 2.353597] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.359980] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.366623] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.377831] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.388196] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.399539] as3722-sd2: supplied by +5V_SYS [ 2.404174] as3722-sd3: supplied by +5V_SYS [ 2.408668] as3722-sd4: supplied by +5V_SYS [ 2.413149] as3722-sd5: supplied by +5V_SYS [ 2.419113] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.425001] as3722-ldo1: supplied by +3.3V_RUN [ 2.429792] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.435449] as3722-ldo3: supplied by +3.3V_SYS [ 2.440751] as3722-ldo4: supplied by +3.3V_SYS [ 2.445580] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.450469] as3722-ldo6: supplied by +3.3V_RUN [ 2.455198] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.460307] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.467247] as3722-ldo9: supplied by +5V_SYS [ 2.472586] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.479182] as3722-ldo10: supplied by +5V_SYS [ 2.484097] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.490724] as3722-ldo11: supplied by +3.3V_RUN [ 2.496074] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.506210] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.515287] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.525908] scsi host0: tegra-ahci [ 2.530459] scsi host1: tegra-ahci [ 2.534201] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.542196] ata2: DUMMY [ 2.547369] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.552259] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.557410] mmc1: Unknown controller version (3). You may experience problems. [ 2.564749] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.633590] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.641726] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.650120] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 2.659481] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 2.683814] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 2.693023] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 2.707505] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.714764] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.720937] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.727820] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.735144] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.740657] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.746754] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.756582] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.763226] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.773252] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.779336] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 2.789139] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.795792] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 2.805802] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 2.815577] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits [ 2.825343] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.835033] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 2.844723] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.854412] pci_bus 0000:00: 1-byte config write to 0000:00:02.0 offset 0xc may corrupt adjacent RW1C bits [ 2.864094] PCI: bus0: Fast back to back transfers disabled [ 2.869676] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.876889] ata1: SATA link down (SStatus 0 SControl 300) [ 2.883124] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.891338] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 2.897409] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.904443] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.926587] mmc1: new high speed SDHC card at address aaaa [ 2.932980] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 2.937776] PCI: bus1: Fast back to back transfers disabled [ 2.943414] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.950244] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 2.956318] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.961929] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.968777] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.976178] pci 0000:02:00.0: supports D1 D2 [ 2.980450] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.999404] mmcblk1: p1 p2 p3 [ 3.013188] PCI: bus2: Fast back to back transfers disabled [ 3.018766] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.025609] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.032401] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.039235] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.047014] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.053135] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.060464] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.065469] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.072269] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.080043] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.087404] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.093520] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.098482] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.104611] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.111394] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.119180] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.126265] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.132600] pcieport 0000:00:01.0: Signaling PME with IRQ 393 [ 3.138474] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.145561] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.151883] pcieport 0000:00:02.0: Signaling PME with IRQ 394 [ 3.157897] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.163530] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.194742] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b58000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395 [ 3.204433] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.217377] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.225125] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.231739] [drm] No driver support for vblank timestamp query. [ 3.361084] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.608192] Console: switching to colour frame buffer device 512x135 [ 3.706787] drm drm: fb0: frame buffer device [ 3.711316] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.719377] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 3.727413] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.734735] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.743962] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.751334] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:11 UTC (946684931) [ 3.760451] +USB0_VBUS_SW: disabling [ 3.764072] +1.8V_RUN_CAM: disabling [ 3.767847] +2.8V_RUN_CAM: disabling [ 3.771579] +1.2V_RUN_CAM_FRONT: disabling [ 3.775952] +1.05V_RUN_CAM_REAR: disabling [ 3.780206] +3.3V_RUN_TOUCH: disabling [ 3.784193] +2.8V_RUN_CAM_AF: disabling [ 3.788185] +1.8V_RUN_VPP_FUSE: disabling [ 3.793307] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.834922] EXT4-fs (mmcblk0p1): recovery complete [ 3.840552] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.848667] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.858882] devtmpfs: mounted [ 3.862578] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#