U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.3 MiB/s done Bytes transferred = 7453768 (71bc48 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 4 MiB/s done Bytes transferred = 67133 (1063d hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x71bc48 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8301363c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.10.0-rc4-next-20170118-146406-g8fd170c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 17 21:49:31 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c1432200, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 16 pages/cpu @eef86000 s34304 r8192 d23040 u65536 [ 0.000000] pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994708K/2096128K available (9216K kernel code, 1231K rwdata, 4176K rodata, 2048K init, 531K bss, 35884K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc1433d00 (1232 kB) [ 0.000000] .bss : 0xc1435000 - 0xc14b9d28 ( 532 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000032] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000048] Switching to timer-based delay loop, resolution 1000ns [ 0.005456] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005476] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005495] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005509] Switching to timer-based delay loop, resolution 83ns [ 0.005966] Console: colour dummy device 80x30 [ 0.005999] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.006017] pid_max: default: 32768 minimum: 301 [ 0.006119] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006132] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006611] CPU: Testing write buffer coherency: ok [ 0.006861] /cpus/cpu@0 missing clock-frequency property [ 0.006903] /cpus/cpu@1 missing clock-frequency property [ 0.006946] /cpus/cpu@2 missing clock-frequency property [ 0.006989] /cpus/cpu@3 missing clock-frequency property [ 0.007003] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007206] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.011032] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.011692] EFI services will not be available. [ 0.011928] smp: Bringing up secondary CPUs ... [ 0.012428] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015590] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.025595] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035130] smp: Brought up 1 node, 4 CPUs [ 0.035152] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.035161] CPU: All CPU(s) started in SVC mode. [ 0.036643] devtmpfs: initialized [ 0.052354] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.052743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.054116] pinctrl core: initialized pinctrl subsystem [ 0.055816] NET: Registered protocol family 16 [ 0.057760] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.060280] cpuidle: using governor menu [ 0.086953] No ATAGs? [ 0.087080] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.087096] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.093668] Serial: AMBA PL011 UART driver [ 0.109723] +5V_SYS: supplied by +VDD_MUX [ 0.109995] +3.3V_SYS: supplied by +VDD_MUX [ 0.110580] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.110597] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.110689] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.110705] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.110873] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.110889] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.110979] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.110993] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.111084] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.111098] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.111186] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.111199] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.114388] vgaarb: loaded [ 0.115163] SCSI subsystem initialized [ 0.115328] libata version 3.00 loaded. [ 0.115566] usbcore: registered new interface driver usbfs [ 0.115624] usbcore: registered new interface driver hub [ 0.115689] usbcore: registered new device driver usb [ 0.119132] pps_core: LinuxPPS API ver. 1 registered [ 0.119143] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.119170] PTP clock support registered [ 0.119364] EDAC MC: Ver: 3.0.0 [ 0.122261] clocksource: Switched to clocksource arch_sys_counter [ 0.131750] NET: Registered protocol family 2 [ 0.132242] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.132368] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.132556] TCP: Hash tables configured (established 8192 bind 8192) [ 0.132638] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.132682] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.132825] NET: Registered protocol family 1 [ 0.133109] RPC: Registered named UNIX socket transport module. [ 0.133120] RPC: Registered udp transport module. [ 0.133130] RPC: Registered tcp transport module. [ 0.133139] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.133151] PCI: CLS 0 bytes, default 64 [ 0.134354] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.135666] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.136264] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.144290] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.144973] NFS: Registering the id_resolver key type [ 0.145004] Key type id_resolver registered [ 0.145014] Key type id_legacy registered [ 0.145058] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.146652] bounce: pool size: 64 pages [ 0.146826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.146838] io scheduler noop registered [ 0.146848] io scheduler deadline registered [ 0.147003] io scheduler cfq registered (default) [ 0.147014] io scheduler mq-deadline registered [ 0.152052] usb2-0 supply vbus not found, using dummy regulator [ 0.152171] usb2-1 supply vbus not found, using dummy regulator [ 0.152581] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.163678] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.163734] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.169733] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 0.179639] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.181679] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.235830] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.238525] console [ttyS0] disabled [ 0.238563] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.126835] console [ttyS0] enabled [ 1.131163] SuperH (H)SCI(F) driver initialized [ 1.136727] msm_serial: driver initialized [ 1.141007] STMicroelectronics ASC driver initialized [ 1.146933] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.156195] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.171559] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.190124] brd: module loaded [ 1.198341] loop: module loaded [ 1.202665] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.210916] as3722 4-0040: AS3722 with revision 0x1 found [ 1.218888] gpio gpiochip1: (as3722-gpio): could not create pin range [ 1.225372] as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517 [ 1.236388] as3722-sd2: supplied by +5V_SYS [ 1.240992] as3722-sd3: supplied by +5V_SYS [ 1.245407] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.251757] as3722-sd4: supplied by +5V_SYS [ 1.256383] as3722-sd5: supplied by +5V_SYS [ 1.262391] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.268395] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.274597] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.280457] as3722-ldo3: supplied by +3.3V_SYS [ 1.284972] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.292735] as3722-ldo4: supplied by +3.3V_SYS [ 1.297388] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.303603] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.308441] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.315365] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.321017] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.327216] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.339844] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.359737] random: fast init done [ 1.363327] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.371146] libphy: Fixed MDIO Bus: probed [ 1.376226] CAN device driver interface [ 1.380998] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.388065] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.393907] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.399878] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.406840] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.416081] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.423533] usbcore: registered new interface driver pegasus [ 1.429231] usbcore: registered new interface driver asix [ 1.434676] usbcore: registered new interface driver ax88179_178a [ 1.440794] usbcore: registered new interface driver cdc_ether [ 1.446680] usbcore: registered new interface driver smsc75xx [ 1.452486] usbcore: registered new interface driver smsc95xx [ 1.458257] usbcore: registered new interface driver net1080 [ 1.463961] usbcore: registered new interface driver cdc_subset [ 1.469905] usbcore: registered new interface driver zaurus [ 1.475541] usbcore: registered new interface driver cdc_ncm [ 1.481409] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.488840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.495378] ehci-pci: EHCI PCI platform driver [ 1.499856] ehci-platform: EHCI generic platform driver [ 1.505301] ehci-orion: EHCI orion driver [ 1.509447] SPEAr-ehci: EHCI SPEAr driver [ 1.513615] ehci-st: EHCI STMicroelectronics driver [ 1.518632] ehci-exynos: EHCI EXYNOS driver [ 1.522989] ehci-atmel: EHCI Atmel driver [ 1.527143] tegra-ehci: Tegra EHCI driver [ 1.533977] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.539395] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.547138] tegra-ehci 7d004000.usb: irq 354, io mem 0x7d004000 [ 1.582287] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.588974] hub 1-0:1.0: USB hub found [ 1.592776] hub 1-0:1.0: 1 port detected [ 1.597232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.603436] ohci-pci: OHCI PCI platform driver [ 1.607911] ohci-platform: OHCI generic platform driver [ 1.613321] ohci-omap3: OHCI OMAP3 driver [ 1.617469] SPEAr-ohci: OHCI SPEAr driver [ 1.621617] ohci-st: OHCI STMicroelectronics driver [ 1.626647] ohci-atmel: OHCI Atmel driver [ 1.631428] usbcore: registered new interface driver usb-storage [ 1.639003] mousedev: PS/2 mouse device common for all mice [ 1.647555] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.654444] as3722-rtc as3722-rtc: RTC interrupt 377 [ 1.662635] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.669798] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.676545] i2c /dev entries driver [ 1.686914] 0-004c supply vcc not found, using dummy regulator [ 1.702706] sdhci: Secure Digital Host Controller Interface driver [ 1.708879] sdhci: Copyright(c) Pierre Ossman [ 1.714899] Synopsys Designware Multimedia Card Interface Driver [ 1.722067] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.728503] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.733413] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.738530] mmc0: Unknown controller version (3). You may experience problems. [ 1.745837] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.812284] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.821657] ledtrig-cpu: registered to indicate activity on CPUs [ 1.828001] usbcore: registered new interface driver usbhid [ 1.833585] usbhid: USB HID core driver [ 1.841345] NET: Registered protocol family 10 [ 1.846609] Segment Routing with IPv6 [ 1.850328] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.856808] NET: Registered protocol family 17 [ 1.861256] can: controller area network core (rev 20120528 abi 9) [ 1.867499] NET: Registered protocol family 29 [ 1.871938] can: raw protocol (rev 20120528) [ 1.876219] can: broadcast manager protocol (rev 20161123 t) [ 1.881877] can: netlink gateway (rev 20130117) max_hops=1 [ 1.887675] Key type dns_resolver registered [ 1.892481] ThumbEE CPU extension supported. [ 1.896750] Registering SWP/SWPB emulation handler [ 1.916827] +USB0_VBUS_SW: supplied by +5V_SYS [ 1.921973] +5V_USB_HS: supplied by +5V_SYS [ 1.928623] +5V_HDMI_CON: supplied by +5V_SYS [ 1.933524] +5V_SATA: supplied by +5V_SYS [ 1.938050] +12V_SATA: supplied by +VDD_MUX [ 1.944297] usb2-0 supply vbus not found, using dummy regulator [ 1.950381] usb2-1 supply vbus not found, using dummy regulator [ 1.956604] usb3-0 supply vbus not found, using dummy regulator [ 1.963526] mmc0: new high speed MMC card at address 0001 [ 1.964047] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 1.964135] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 1.968147] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.973141] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 1.974503] ------------[ cut here ]------------ [ 1.974520] WARNING: CPU: 1 PID: 87 at drivers/base/dd.c:349 driver_probe_device+0x288/0x2c0 [ 1.974525] Modules linked in: [ 1.974539] CPU: 1 PID: 87 Comm: kworker/1:1 Not tainted 4.10.0-rc4-next-20170118-146406-g8fd170c #1 [ 1.974543] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 1.974555] Workqueue: events deferred_probe_work_func [ 1.974585] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 1.974604] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 1.974620] [] (dump_stack) from [] (__warn+0xd4/0x100) [ 1.974633] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 1.974646] [] (warn_slowpath_null) from [] (driver_probe_device+0x288/0x2c0) [ 1.974659] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 1.974670] [] (bus_for_each_drv) from [] (__device_attach+0x9c/0x100) [ 1.974681] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [ 1.974693] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x8c) [ 1.974705] [] (deferred_probe_work_func) from [] (process_one_work+0x134/0x33c) [ 1.974718] [] (process_one_work) from [] (process_scheduled_works+0x28/0x38) [ 1.974729] [] (process_scheduled_works) from [] (worker_thread+0x218/0x4f0) [ 1.974743] [] (worker_thread) from [] (kthread+0xfc/0x134) [ 1.974757] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 1.974764] ---[ end trace f9c6d6c8b528bd51 ]--- [ 1.975031] gpio gpiochip1: (as3722-gpio): could not create pin range [ 1.975040] as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517 [ 1.981742] as3722-sd2: supplied by +5V_SYS [ 1.982216] as3722-sd3: supplied by +5V_SYS [ 1.982641] as3722-sd4: supplied by +5V_SYS [ 1.982987] as3722-sd5: supplied by +5V_SYS [ 1.985250] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.986879] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.987914] as3722-ldo3: supplied by +3.3V_SYS [ 1.988914] as3722-ldo4: supplied by +3.3V_SYS [ 1.989327] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.989739] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.989745] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.989758] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.995383] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 [ 1.995391] tegra-ahci 70027000.sata: Failed to get regulators [ 1.998967] tegra-ehci 7d008000.usb: EHCI Host Controller [ 1.998995] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 1.999209] tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000 [ 2.022404] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.023321] hub 2-0:1.0: USB hub found [ 2.023369] hub 2-0:1.0: 1 port detected [ 2.026298] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.026321] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.030105] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.030159] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.033925] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.039216] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.040235] ------------[ cut here ]------------ [ 2.040252] WARNING: CPU: 1 PID: 87 at drivers/base/dd.c:349 driver_probe_device+0x288/0x2c0 [ 2.040256] Modules linked in: [ 2.040270] CPU: 1 PID: 87 Comm: kworker/1:1 Tainted: G W 4.10.0-rc4-next-20170118-146406-g8fd170c #1 [ 2.040275] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 2.040286] Workqueue: events deferred_probe_work_func [ 2.040318] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.040336] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 2.040352] [] (dump_stack) from [] (__warn+0xd4/0x100) [ 2.040365] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 2.040377] [] (warn_slowpath_null) from [] (driver_probe_device+0x288/0x2c0) [ 2.040390] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.040402] [] (bus_for_each_drv) from [] (__device_attach+0x9c/0x100) [ 2.040412] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [ 2.040423] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x8c) [ 2.040436] [] (deferred_probe_work_func) from [] (process_one_work+0x134/0x33c) [ 2.040448] [] (process_one_work) from [] (process_scheduled_works+0x28/0x38) [ 2.040459] [] (process_scheduled_works) from [] (worker_thread+0x218/0x4f0) [ 2.040473] [] (worker_thread) from [] (kthread+0xfc/0x134) [ 2.040488] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 2.040495] ---[ end trace f9c6d6c8b528bd52 ]--- [ 2.040769] gpio gpiochip1: (as3722-gpio): could not create pin range [ 2.040778] as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517 [ 2.047505] as3722-sd2: supplied by +5V_SYS [ 2.047980] as3722-sd3: supplied by +5V_SYS [ 2.048327] as3722-sd4: supplied by +5V_SYS [ 2.048674] as3722-sd5: supplied by +5V_SYS [ 2.050661] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.052090] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.053235] as3722-ldo3: supplied by +3.3V_SYS [ 2.054246] as3722-ldo4: supplied by +3.3V_SYS [ 2.054622] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.055055] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 2.055061] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 2.055073] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 2.060527] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 [ 2.060535] tegra-ahci 70027000.sata: Failed to get regulators [ 2.061836] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.064895] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.064919] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.068700] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.068754] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.072437] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.078619] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.079650] ------------[ cut here ]------------ [ 2.079671] WARNING: CPU: 1 PID: 87 at drivers/base/dd.c:349 driver_probe_device+0x288/0x2c0 [ 2.079675] Modules linked in: [ 2.079690] CPU: 1 PID: 87 Comm: kworker/1:1 Tainted: G W 4.10.0-rc4-next-20170118-146406-g8fd170c #1 [ 2.079695] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 2.079707] Workqueue: events deferred_probe_work_func [ 2.079743] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.079762] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 2.079780] [] (dump_stack) from [] (__warn+0xd4/0x100) [ 2.079794] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 2.079807] [] (warn_slowpath_null) from [] (driver_probe_device+0x288/0x2c0) [ 2.079816] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:24 UTC (946684944) [ 2.079825] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.079838] [] (bus_for_each_drv) from [] (__device_attach+0x9c/0x100) [ 2.079850] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [ 2.079862] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x8c) [ 2.079876] [] (deferred_probe_work_func) from [] (process_one_work+0x134/0x33c) [ 2.079888] [] (process_one_work) from [] (process_scheduled_works+0x28/0x38) [ 2.079900] [] (process_scheduled_works) from [] (worker_thread+0x218/0x4f0) [ 2.079914] [] (worker_thread) from [] (kthread+0xfc/0x134) [ 2.079929] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 2.079936] ---[ end trace f9c6d6c8b528bd53 ]--- [ 2.080246] gpio gpiochip1: (as3722-gpio): could not create pin range [ 2.080254] as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517 [ 2.080824] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.080831] +USB0_VBUS_SW: disabling [ 2.080838] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.080844] +5V_HDMI_CON: disabling [ 2.080849] +5V_SATA: disabling [ 2.080854] +12V_SATA: disabling [ 2.086900] as3722-sd2: supplied by +5V_SYS [ 2.087360] as3722-sd3: supplied by +5V_SYS [ 2.087713] as3722-sd4: supplied by +5V_SYS [ 2.088056] as3722-sd5: supplied by +5V_SYS [ 2.090021] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.091418] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.092530] as3722-ldo3: supplied by +3.3V_SYS [ 2.093665] as3722-ldo4: supplied by +3.3V_SYS [ 2.094059] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.094463] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 2.094469] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 2.094483] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 2.099949] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 [ 2.099955] tegra-ahci 70027000.sata: Failed to get regulators [ SEM16G 14.7 GiB [ 2.864842] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.871079] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.877333] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.885709] mmcblk0: p1 [ 2.892353] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.894504] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.894527] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.898547] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.898601] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.902130] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.907826] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.908857] ------------[ cut here ]------------ [ 2.908874] WARNING: CPU: 2 PID: 60 at drivers/base/dd.c:349 driver_probe_device+0x288/0x2c0 [ 2.908878] Modules linked in: [ 2.908892] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 4.10.0-rc4-next-20170118-146406-g8fd170c #1 [ 2.908897] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 2.908908] Workqueue: events deferred_probe_work_func [ 2.908937] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 2.908955] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 2.908971] [] (dump_stack) from [] (__warn+0xd4/0x100) [ 2.908984] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 2.908996] [] (warn_slowpath_null) from [] (driver_probe_device+0x288/0x2c0) [ 2.909010] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 2.909021] [] (bus_for_each_drv) from [] (__device_attach+0x9c/0x100) [ 2.909031] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [ 2.909042] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x8c) [ 2.909054] [] (deferred_probe_work_func) from [] (process_one_work+0x134/0x33c) [ 2.909066] [] (process_one_work) from [] (worker_thread+0x2c/0x4f0) [ 2.909080] [] (worker_thread) from [] (kthread+0xfc/0x134) [ 2.909095] [] (kthread) from [] (ret_from_fork+0x14/0x3c) [ 2.909101] ---[ end trace f9c6d6c8b528bd54 ]--- [ 2.915642] as3722-sd2: supplied by +5V_SYS [ 2.916106] as3722-sd3: supplied by +5V_SYS [ 2.916478] as3722-sd4: supplied by +5V_SYS [ 2.916807] as3722-sd5: supplied by +5V_SYS [ 2.919073] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.920487] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.921549] as3722-ldo3: supplied by +3.3V_SYS [ 2.922612] as3722-ldo4: supplied by +3.3V_SYS [ 2.923131] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.923556] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 2.923562] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 2.923576] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 2.929268] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 [ 2.929276] tegra-ahci 70027000.sata: Failed to get regulators [ 2.931925] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.931948] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.933985] +3.3V_RUN: supplied by +3.3V_SYS [ 2.936351] +3.3V_LP0: supplied by +3.3V_SYS [ 2.937096] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.938217] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.938302] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.942235] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.947945] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.952197] as3722-sd2: supplied by +5V_SYS [ 2.952580] as3722-sd3: supplied by +5V_SYS [ 2.953012] as3722-sd4: supplied by +5V_SYS [ 2.953320] as3722-sd5: supplied by +5V_SYS [ 2.955220] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.956117] as3722-ldo1: supplied by +3.3V_RUN [ 2.956545] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.957538] as3722-ldo3: supplied by +3.3V_SYS [ 2.958463] as3722-ldo4: supplied by +3.3V_SYS [ 2.958783] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.959120] as3722-ldo6: supplied by +3.3V_RUN [ 2.959454] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.960031] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.960755] as3722-ldo9: supplied by +5V_SYS [ 2.962007] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.962564] as3722-ldo10: supplied by +5V_SYS [ 2.962847] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.963596] as3722-ldo11: supplied by +3.3V_RUN [ 2.964177] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.968108] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.968120] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 3.318594] scsi host0: tegra-ahci [ 3.323317] scsi host1: tegra-ahci [ 3.326986] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 3.335029] ata2: DUMMY [ 3.340473] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.345427] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.350543] mmc1: Unknown controller version (3). You may experience problems. [ 3.357394] EXT4-fs (mmcblk0p1): recovery complete [ 3.358333] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.358377] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.360426] devtmpfs: mounted [ 3.381078] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.452804] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 3.460951] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 3.469494] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 3.478849] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 3.503388] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 3.512599] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 3.526677] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 3.533933] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.540108] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 3.546990] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 3.554340] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.559867] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 3.566002] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.575825] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.582490] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.592539] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.598625] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.608430] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.615088] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.625150] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.634933] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.644714] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.654408] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 3.664101] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.666044] ata1: SATA link down (SStatus 0 SControl 300) [ 3.679185] pci_bus 0000:00: 1-byte config write to 0000:00:02.0 offset 0xc may corrupt adjacent RW1C bits [ 3.688841] PCI: bus0: Fast back to back transfers disabled [ 3.694425] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.702441] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.710650] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.716713] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.723743] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.732034] Freeing unused kernel memory: 2048K [ 3.750270] mmc1: new high speed SDHC card at address aaaa [ 3.756159] PCI: bus1: Fast back to back transfers disabled [ 3.761754] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.768621] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.774673] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.780273] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.787101] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.794480] pci 0000:02:00.0: supports D1 D2 [ 3.798749] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.806129] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.823193] mmcblk1: p1 p2 p3 [ 3.832378] PCI: bus2: Fast back to back transfers disabled [ 3.837965] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.844783] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] bash: ca[ 3.851573] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] nnot set terminal process group [ 3.859066] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] (-1): Inappropriate ioctl for de[ 3.869581] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] vice bash: no job control in th[ 3.878453] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] is shell [ 3.888524] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.894329] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.901134] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] root@(none):/# [ 3.908942] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.917582] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.923717] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.928683] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.934812] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.941597] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff