Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.481468819 -0800
+++ /tmp/foob	2017-01-13 01:43:02.481468819 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-169762-geec0d3d (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Jan 11 20:24:09 PST 2017
+Linux version 4.10.0-rc3-next-20170113-170032-g41ca03c (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Jan 13 01:36:22 PST 2017
 Boot CPU: AArch64 Processor [411fd070]
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -18,15 +18,15 @@
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
-Memory: 998868K/1048576K available (8508K kernel code, 954K rwdata, 4136K rodata, 1088K init, 387K bss, 33324K reserved, 16384K cma-reserved)
+Memory: 998864K/1048576K available (8508K kernel code, 956K rwdata, 4140K rodata, 1088K init, 389K bss, 33328K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
     .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
       .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
-      .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
+      .data : 0xffff000008df0000 - 0xffff000008edf200   (   957 KB)
+       .bss : 0xffff000008edf200 - 0xffff000008f407b0   (   390 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -101,7 +101,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.688:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.692:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=46 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -167,7 +167,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-01-12 04:24:52 UTC (1484195092)
+rtc-pl031 9010000.pl031: setting system clock to 2017-01-13 09:37:03 UTC (1484300223)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.489468846 -0800
+++ /tmp/foob	2017-01-13 01:43:02.489468846 -0800
@@ -39,9 +39,9 @@
 	 #################################################################
 	 #################################################################
 	 #####################################################
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 7446616 (71a058 hex)
+Bytes transferred = 7446568 (71a028 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -52,7 +52,7 @@
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x71a058 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x71a028 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Jan 13 01:33:13 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994892K/2096128K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35700K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994892K/2096128K available (9216K kernel code, 1230K rwdata, 4172K rodata, 2048K init, 467K bss, 35700K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -161,7 +161,6 @@
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
 TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
-vdd_hdmi_5v0: supplied by vdd-sys-5v0
 TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
 TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
 TPS65090_RAILSFET1: supplied by vdd_ac_bat
@@ -176,6 +175,7 @@
 palmas 2-0058: Irq flag is 0x00000004
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
 SMPS12: supplied by vdd-ao
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
 SMPS3: supplied by vdd-ao
 SMPS457: supplied by vdd-sys-3v3
 SMPS8: supplied by vdd-sys-3v3
@@ -304,32 +304,32 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-mmc0: new high speed SDHC card at address aaaa
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
+mmc0: new high speed SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+ mmcblk0: p1 p2 p3
 [drm] No driver support for vblank timestamp query.
 [drm] Cannot find any crtc or sizes - going 1024x768
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
-Console: switching to colour frame buffer device 128x48
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 mmc1: new high speed MMC card at address 0001
- mmcblk0: p1 p2 p3
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-05 15:53:10 UTC (973439590)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-06 21:03:39 UTC (973544619)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -341,4 +341,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.419570] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.439474] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.497468873 -0800
+++ /tmp/foob	2017-01-13 01:43:02.497468873 -0800
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ####################################################
-	 3.1 MiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 5523568 (544870 hex)
+Bytes transferred = 5524408 (544bb8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x544870 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x544bb8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri Jan 13 01:33:16 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -153,7 +153,6 @@
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
 TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
-vdd_hdmi_5v0: supplied by vdd-sys-5v0
 TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
 TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
 TPS65090_RAILSFET1: supplied by vdd_ac_bat
@@ -168,6 +167,7 @@
 palmas 2-0058: Irq flag is 0x00000004
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
 SMPS12: supplied by vdd-ao
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
 SMPS3: supplied by vdd-ao
 SMPS457: supplied by vdd-sys-3v3
 SMPS8: supplied by vdd-sys-3v3
@@ -321,7 +321,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-05 15:50:27 UTC (973439427)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-06 21:06:22 UTC (973544782)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -335,4 +335,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.700191] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.709986] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.505468905 -0800
+++ /tmp/foob	2017-01-13 01:43:02.505468905 -0800
@@ -36,7 +36,7 @@
 	 #####################################################
 	 4 MiB/s
 done
-Bytes transferred = 7446616 (71a058 hex)
+Bytes transferred = 7446568 (71a028 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -47,7 +47,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x71a058 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x71a028 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Jan 13 01:33:13 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -79,7 +79,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994772K/2096128K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35820K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994772K/2096128K available (9216K kernel code, 1230K rwdata, 4172K rodata, 2048K init, 467K bss, 35820K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -325,30 +325,29 @@
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 ------------[ cut here ]------------
-WARNING: CPU: 2 PID: 60 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
+WARNING: CPU: 2 PID: 91 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 2 PID: 60 Comm: kworker/2:1 Not tainted 4.10.0-rc3-next-20170112-145329-geec0d3d #1
+CPU: 2 PID: 91 Comm: kworker/2:1 Not tainted 4.10.0-rc3-next-20170113-145599-g41ca03c #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059c314>] (dump_stack+0x84/0xa4)
-[<c059c314>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
+[<c030b158>] (show_stack) from [<c059c414>] (dump_stack+0x84/0xa4)
+[<c059c414>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
 [<c0341b94>] (__warn) from [<c0341be0>] (warn_slowpath_null+0x20/0x28)
-[<c0341be0>] (warn_slowpath_null) from [<c07e1048>] (driver_probe_device+0x288/0x2c0)
-[<c07e1048>] (driver_probe_device) from [<c07df53c>] (bus_for_each_drv+0x44/0x8c)
-[<c07df53c>] (bus_for_each_drv) from [<c07e0d38>] (__device_attach+0x9c/0x100)
-[<c07e0d38>] (__device_attach) from [<c07e03d4>] (bus_probe_device+0x84/0x8c)
-[<c07e03d4>] (bus_probe_device) from [<c07e0808>] (deferred_probe_work_func+0x60/0x8c)
-[<c07e0808>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
+[<c0341be0>] (warn_slowpath_null) from [<c07e1248>] (driver_probe_device+0x288/0x2c0)
+[<c07e1248>] (driver_probe_device) from [<c07df73c>] (bus_for_each_drv+0x44/0x8c)
+[<c07df73c>] (bus_for_each_drv) from [<c07e0f38>] (__device_attach+0x9c/0x100)
+[<c07e0f38>] (__device_attach) from [<c07e05d4>] (bus_probe_device+0x84/0x8c)
+[<c07e05d4>] (bus_probe_device) from [<c07e0a08>] (deferred_probe_work_func+0x60/0x8c)
+[<c07e0a08>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
 [<c0357084>] (process_one_work) from [<c03572b4>] (process_scheduled_works+0x28/0x38)
 [<c03572b4>] (process_scheduled_works) from [<c03574dc>] (worker_thread+0x218/0x4f0)
 [<c03574dc>] (worker_thread) from [<c035c854>] (kthread+0xfc/0x134)
 [<c035c854>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace 8b75dd667b9dab31 ]---
+---[ end trace 5e9ac5e3f3d5624b ]---
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 as3722-sd5: supplied by +5V_SYS
 as3722-ldo0: supplied by +1.35V_LP0(sd2)
 as3722-ldo2: supplied by +1.8V_VDDIO
@@ -358,29 +357,6 @@
 +VDDIO_SDMMC3: bypassed regulator has no supply!
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
-------------[ cut here ]------------
-WARNING: CPU: 2 PID: 60 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
-Modules linked in:
-CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc3-next-20170112-145329-geec0d3d #1
-Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
-Workqueue: events deferred_probe_work_func
-[<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059c314>] (dump_stack+0x84/0xa4)
-[<c059c314>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
-[<c0341b94>] (__warn) from [<c0341be0>] (warn_slowpath_null+0x20/0x28)
-[<c0341be0>] (warn_slowpath_null) from [<c06e96ac>] (regulator_unregister+0xc0/0xcc)
-[<c06e96ac>] (regulator_unregister) from [<c07e3f00>] (release_nodes+0x164/0x1dc)
-[<c07e3f00>] (release_nodes) from [<c07e0e6c>] (driver_probe_device+0xac/0x2c0)
-[<c07e0e6c>] (driver_probe_device) from [<c07df53c>] (bus_for_each_drv+0x44/0x8c)
-[<c07df53c>] (bus_for_each_drv) from [<c07e0d38>] (__device_attach+0x9c/0x100)
-[<c07e0d38>] (__device_attach) from [<c07e03d4>] (bus_probe_device+0x84/0x8c)
-[<c07e03d4>] (bus_probe_device) from [<c07e0808>] (deferred_probe_work_func+0x60/0x8c)
-[<c07e0808>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
-[<c0357084>] (process_one_work) from [<c03572b4>] (process_scheduled_works+0x28/0x38)
-[<c03572b4>] (process_scheduled_works) from [<c03574dc>] (worker_thread+0x218/0x4f0)
-[<c03574dc>] (worker_thread) from [<c035c854>] (kthread+0xfc/0x134)
-[<c035c854>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace 8b75dd667b9dab32 ]---
 tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -392,58 +368,136 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
-Unable to handle kernel paging request at virtual address 000dbd9c
-pgd = c0204000
-[000dbd9c] *pgd=00000000
-Internal error: Oops: 5 [#1] SMP ARM
-Modules linked in:
-CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc3-next-20170112-145329-geec0d3d #1
-Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
-Workqueue: events deferred_probe_work_func
-task: ee3d8fc0 task.stack: ee45c000
-PC is at regulator_enable+0x18/0x120
-LR is at regulator_enable+0x28/0x120
-pc : [<c06e9894>]    lr : [<c06e98a4>]    psr: 60000113
-sp : ee45dcb8  ip : 00000000  fp : c1302d00
-r10: ee7e5858  r9 : 00000003  r8 : c0d3bd88
-r7 : 00000000  r6 : 00000000  r5 : 000dbba0  r4 : ee7e5810
-r3 : 00000080  r2 : 00000000  r1 : c06e98ec  r0 : ee784c80
-Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
-Control: 10c5387d  Table: 8020406a  DAC: 00000051
-Process kworker/2:1 (pid: 60, stack limit = 0xee45c220)
-Stack: (0xee45dcb8 to 0xee45e000)
-dca0:                                                       ee7e5810 ee7e4c00
-dcc0: 00000000 c06e98a4 ee7e5810 ee47a400 00000000 c06e98a4 ee7e5810 00000000
-dce0: 00000000 c07cf834 00000000 ee5a4010 ee7e5810 ee5779e8 00000000 ee577800
-dd00: ee5779d4 ee577800 ee785480 c0754780 00000000 00000000 00000000 00000001
-dd20: ee7e5c00 c07c7d18 00000000 00000001 ffffffff 00000000 ee7e5c00 00000000
-dd40: 00000000 c1406cdc 00000000 00000000 ee78ecc0 c0776e6c 00000000 ee7e5c00
-dd60: c1406cdc ee577810 00000000 ee7e5c00 ee577800 00000000 00000000 c1406df4
-dd80: 00000010 c07c78b4 c07c7884 ee577810 c1479fc8 c07544ac c0754490 c07e0fbc
-dda0: 00000000 00000000 ee45ddd8 c07e1164 00000001 c1479fa4 00000000 c07df53c
-ddc0: ee57f16c ee582638 ee577810 ee577844 c1405718 c07e0d38 ee577810 00000001
-dde0: 00000000 ee577810 ee577810 c1405718 ee1a1e10 c07e03d4 ee577810 00000000
-de00: ee577818 c07de848 00000000 0000001c c07cee54 00000000 ee577800 ee7e5810
-de20: ee57cb80 ee5779d4 ee5779b0 eefad780 ee577810 c0754678 eefc9974 ee577784
-de40: c1405780 c14056e8 ee7e5810 ee577610 00000010 c0754fa0 ee7e5810 ee1e2410
-de60: 00000000 ee1e2400 00000000 c07d14e4 00000000 ee1a7100 ee7e5810 00000000
-de80: fffffffe ee1e2410 fffffdfb c1406f58 c1406f58 c07e2720 c07e26d0 ee1e2410
-dea0: c1479fc8 00000000 00000000 c07e0fbc 00000000 00000000 ee45dee8 c07e1164
-dec0: 00000001 00000000 00000000 c07df53c ee04276c ee582738 ee1e2410 ee1e2444
-dee0: c14074b0 c07e0d38 ee1e2410 00000001 ee063f00 ee1e2410 ee1e2410 c14074b0
-df00: eefb0800 c07e03d4 ee1e2410 c1407430 c140744c c07e0808 ee1c4080 c1407454
-df20: eefad780 c0357084 ee1c4080 c0bef4f8 ee1c4080 ee1c4098 00000001 eefad780
-df40: ee1c4098 eefad780 00000008 c03572b4 eefb08f5 ee1c4080 eefad798 c03574dc
-df60: ee0b3ee0 ee0d2600 00000000 ee0d2600 00000000 ee1c1140 ee0d261c ee1c4080
-df80: ee0b3ee0 c03572c4 00000000 c035c854 ee1c1140 c035c758 00000000 00000000
-dfa0: 00000000 00000000 00000000 c0307f78 00000000 00000000 00000000 00000000
-dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
-[<c06e9894>] (regulator_enable) from [<c06e98a4>] (regulator_enable+0x28/0x120)
-Code: e5905030 e3130001 13a04000 1a000015 (e59501fc) 
----[ end trace 8b75dd667b9dab33 ]---
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+as3722-ldo1: supplied by +3.3V_RUN
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
+as3722-ldo6: supplied by +3.3V_RUN
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
+as3722-ldo11: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
+ata2: DUMMY
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:02.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+ata1: SATA link down (SStatus 0 SControl 300)
+pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
+pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
+pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
+PCI: bus2: Fast back to back transfers disabled
+pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
+pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
+pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
+pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
+pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:02.0: PCI bridge to [bus 02]
+pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0142)
+pcieport 0000:00:01.0: Signaling PME with IRQ 393
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:02.0: enabling device (0140 -> 0143)
+pcieport 0000:00:02.0: Signaling PME with IRQ 394
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:02:00.0: enabling device (0140 -> 0143)
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b58000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
+cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
+cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
++USB0_VBUS_SW: disabling
++1.8V_RUN_CAM: disabling
++2.8V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++3.3V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.513468936 -0800
+++ /tmp/foob	2017-01-13 01:43:02.513468936 -0800
@@ -32,20 +32,20 @@
 	 #################################################################
 	 #################################################################
 	 ####################################################
-	 4 MiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 5523568 (544870 hex)
+Bytes transferred = 5524408 (544bb8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 3.8 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x544870 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x544bb8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -54,7 +54,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri Jan 13 01:33:16 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -320,7 +320,6 @@
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 as3722-sd5: supplied by +5V_SYS
 as3722-ldo0: supplied by +1.35V_LP0(sd2)
 as3722-ldo2: supplied by +1.8V_VDDIO
@@ -330,32 +329,9 @@
 +VDDIO_SDMMC3: bypassed regulator has no supply!
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
-------------[ cut here ]------------
-WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
-Modules linked in:
-CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.10.0-rc3-next-20170112-145329-geec0d3d #1
-Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
-Workqueue: events deferred_probe_work_func
-[<c010f308>] (unwind_backtrace) from [<c010a900>] (show_stack+0x10/0x14)
-[<c010a900>] (show_stack) from [<c034fe3c>] (dump_stack+0x84/0xa4)
-[<c034fe3c>] (dump_stack) from [<c011fb3c>] (__warn+0xd4/0x100)
-[<c011fb3c>] (__warn) from [<c011fb88>] (warn_slowpath_null+0x20/0x28)
-[<c011fb88>] (warn_slowpath_null) from [<c03dd5e4>] (regulator_unregister+0xc0/0xcc)
-[<c03dd5e4>] (regulator_unregister) from [<c046c7e8>] (release_nodes+0x164/0x1dc)
-[<c046c7e8>] (release_nodes) from [<c0469780>] (driver_probe_device+0xac/0x2c0)
-[<c0469780>] (driver_probe_device) from [<c0467e60>] (bus_for_each_drv+0x44/0x8c)
-[<c0467e60>] (bus_for_each_drv) from [<c046964c>] (__device_attach+0x9c/0x100)
-[<c046964c>] (__device_attach) from [<c0468ce8>] (bus_probe_device+0x84/0x8c)
-[<c0468ce8>] (bus_probe_device) from [<c046911c>] (deferred_probe_work_func+0x60/0x8c)
-[<c046911c>] (deferred_probe_work_func) from [<c0134c70>] (process_one_work+0x120/0x320)
-[<c0134c70>] (process_one_work) from [<c0134e98>] (process_scheduled_works+0x28/0x38)
-[<c0134e98>] (process_scheduled_works) from [<c01350ac>] (worker_thread+0x204/0x4b4)
-[<c01350ac>] (worker_thread) from [<c013a3ec>] (kthread+0xfc/0x134)
-[<c013a3ec>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
----[ end trace 21a7ee500acf6b33 ]---
 tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
@@ -367,58 +343,151 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
-Unable to handle kernel NULL pointer dereference at virtual address 0000021c
-pgd = c0004000
-[0000021c] *pgd=00000000
-Internal error: Oops: 5 [#1] PREEMPT SMP ARM
-Modules linked in:
-CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: G        W       4.10.0-rc3-next-20170112-145329-geec0d3d #1
-Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
-Workqueue: events deferred_probe_work_func
-task: ee8b4200 task.stack: ee998000
-PC is at regulator_enable+0x18/0x120
-LR is at regulator_enable+0x28/0x120
-pc : [<c03dd7cc>]    lr : [<c03dd7dc>]    psr: 60000113
-sp : ee999cb8  ip : 00000000  fp : c0d02d00
-r10: ee200c58  r9 : 00000003  r8 : c09554a0
-r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : ee200c10
-r3 : 00000000  r2 : 00000000  r1 : c03dd824  r0 : ee1fb500
-Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
-Control: 10c5387d  Table: 8000406a  DAC: 00000051
-Process kworker/0:1 (pid: 29, stack limit = 0xee998210)
-Stack: (0xee999cb8 to 0xee99a000)
-9ca0:                                                       ee200c10 ee1fa800
-9cc0: 00000000 c03dd7dc ee200c10 ee1ba400 00000000 c03dd7dc ee200c10 00000000
-9ce0: 00000000 c04581a8 00000000 eeb66810 ee200c10 ee020608 00000000 ee020400
-9d00: ee0205f0 ee020400 ee1a4cc0 c0414f08 00000000 00000000 00000000 00000001
-9d20: ee200800 c0450600 00000000 00000001 ffffffff 00000000 ee200800 00000000
-9d40: 00000000 c0d35b1c 00000000 00000000 ee20bc40 c0436b60 c0d35b1c ee020410
-9d60: 00000000 c0d35c34 00000000 ee200800 ee020400 00000000 00000000 c0d35c34
-9d80: 00000011 c045019c c045016c ee020410 c0dadfbc c0414c34 c0414c18 c04698d0
-9da0: 00000000 00000000 ee999dd8 c0469a78 00000001 c0dadf98 00000000 c0467e60
-9dc0: eea82170 eeb6c3b8 ee020410 ee020444 c0d35680 c046964c ee020410 00000001
-9de0: 00000000 ee020410 ee020410 c0d35680 ee988010 c0468ce8 ee020410 00000000
-9e00: ee020418 c046718c 00000000 0000001c c04577c8 00000000 ee020400 ee200c10
-9e20: eeb6d380 ee0205f0 ee0205c8 eef8c600 ee020410 c0414e00 eefc8974 eeb80dac
-9e40: c0d356ec c0d35648 ee200c10 eeb80c10 00000011 c0415714 ee200c10 ee994a10
-9e60: 00000000 ee994a00 00000000 c0459e58 00000000 ee993740 ee200c10 00000000
-9e80: ffffffed ee994a10 fffffdfb c0d35d98 c0d35d98 c046af6c c046af1c ee994a10
-9ea0: c0dadfbc 00000000 00000000 c04698d0 00000000 00000000 ee999ee8 c0469a78
-9ec0: 00000001 00000000 00000000 c0467e60 ee888d70 eeb6c2b8 ee994a10 ee994a44
-9ee0: c0d36328 c046964c ee994a10 00000001 ee8b4200 ee994a10 ee994a10 c0d36328
-9f00: eef8f900 c0468ce8 ee994a10 c0d362a0 c0d362c0 c046911c ee991680 c0d362c8
-9f20: eef8c600 c0134c70 eef8c600 eef94500 ee991680 ee991698 00000001 eef8c600
-9f40: ee991698 eef8c600 00000008 c0134e98 eef8f9f5 ee991680 eef8c618 c01350ac
-9f60: ee853ee0 ee98dbc0 00000000 ee98dbc0 00000000 ee98d600 ee98dbdc ee991680
-9f80: ee853ee0 c0134ea8 00000000 c013a3ec ee98d600 c013a2f0 00000000 00000000
-9fa0: 00000000 00000000 00000000 c0107938 00000000 00000000 00000000 00000000
-9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 efff7fff ffff6fef
-[<c03dd7cc>] (regulator_enable) from [<c03dd7dc>] (regulator_enable+0x28/0x120)
-Code: e5905030 e3130001 13a04000 1a000015 (e595021c) 
----[ end trace 21a7ee500acf6b34 ]---
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+as3722-ldo1: supplied by +3.3V_RUN
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
+as3722-ldo6: supplied by +3.3V_RUN
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
+as3722-ldo11: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
+ata2: DUMMY
+tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 347, io mem 0x70090000
+hub 3-0:1.0: USB hub found
+hub 3-0:1.0: 6 ports detected
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4
+usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 4-0:1.0: USB hub found
+hub 4-0:1.0: 2 ports detected
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+ata1: SATA link down (SStatus 0 SControl 300)
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:02.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
+pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
+pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
+PCI: bus2: Fast back to back transfers disabled
+pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
+pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
+pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
+pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit]
+pci 0000:02:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:02.0: PCI bridge to [bus 02]
+pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
+pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0142)
+pcieport 0000:00:01.0: Signaling PME with IRQ 393
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:02.0: enabling device (0140 -> 0143)
+pcieport 0000:00:02.0: Signaling PME with IRQ 394
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:02:00.0: enabling device (0140 -> 0143)
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0afb000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 395
+r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
+cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
+cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
+input: gpio-keys as /devices/soc0/gpio-keys/input/input2
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
++USB0_VBUS_SW: disabling
++1.8V_RUN_CAM: disabling
++2.8V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++3.3V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
+ALSA device list:
+  #0: tegra-hda at 0x70038000 irq 346
+  #1: NVIDIA Tegra Jetson TK1
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 1024K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.521468964 -0800
+++ /tmp/foob	2017-01-13 01:43:02.521468964 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -42,20 +42,20 @@
 	 #################################################################
 	 #################################################################
 	 #####################################################
-	 3.5 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 7446616 (71a058 hex)
+Bytes transferred = 7446568 (71a028 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x71a058 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x71a028 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -63,7 +63,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Jan 13 01:33:13 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -88,7 +88,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1995788K/2097148K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35824K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1995788K/2097148K available (9216K kernel code, 1230K rwdata, 4172K rodata, 2048K init, 467K bss, 35824K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -296,8 +296,8 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
@@ -326,36 +326,37 @@
 tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
 panel supply power not found, using dummy regulator
 ------------[ cut here ]------------
-WARNING: CPU: 0 PID: 98 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
+WARNING: CPU: 1 PID: 98 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 0 PID: 98 Comm: kworker/0:2 Not tainted 4.10.0-rc3-next-20170112-145329-geec0d3d #1
+CPU: 1 PID: 98 Comm: kworker/1:2 Not tainted 4.10.0-rc3-next-20170113-145599-g41ca03c #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059c314>] (dump_stack+0x84/0xa4)
-[<c059c314>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
+[<c030b158>] (show_stack) from [<c059c414>] (dump_stack+0x84/0xa4)
+[<c059c414>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
 [<c0341b94>] (__warn) from [<c0341be0>] (warn_slowpath_null+0x20/0x28)
-[<c0341be0>] (warn_slowpath_null) from [<c07e1048>] (driver_probe_device+0x288/0x2c0)
-[<c07e1048>] (driver_probe_device) from [<c07df53c>] (bus_for_each_drv+0x44/0x8c)
-[<c07df53c>] (bus_for_each_drv) from [<c07e0d38>] (__device_attach+0x9c/0x100)
-[<c07e0d38>] (__device_attach) from [<c07e03d4>] (bus_probe_device+0x84/0x8c)
-[<c07e03d4>] (bus_probe_device) from [<c07e0808>] (deferred_probe_work_func+0x60/0x8c)
-[<c07e0808>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
+[<c0341be0>] (warn_slowpath_null) from [<c07e1248>] (driver_probe_device+0x288/0x2c0)
+[<c07e1248>] (driver_probe_device) from [<c07df73c>] (bus_for_each_drv+0x44/0x8c)
+[<c07df73c>] (bus_for_each_drv) from [<c07e0f38>] (__device_attach+0x9c/0x100)
+[<c07e0f38>] (__device_attach) from [<c07e05d4>] (bus_probe_device+0x84/0x8c)
+[<c07e05d4>] (bus_probe_device) from [<c07e0a08>] (deferred_probe_work_func+0x60/0x8c)
+[<c07e0a08>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
 [<c0357084>] (process_one_work) from [<c03572b4>] (process_scheduled_works+0x28/0x38)
 [<c03572b4>] (process_scheduled_works) from [<c03574dc>] (worker_thread+0x218/0x4f0)
 [<c03574dc>] (worker_thread) from [<c035c854>] (kthread+0xfc/0x134)
 [<c035c854>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace 2b6286bc66195049 ]---
+---[ end trace bd3e44fe7df5f99e ]---
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_RUN: supplied by +3.3V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-+3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
+elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
@@ -365,14 +366,15 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+elan_i2c 1-0015: invalid report id data (ff)
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -389,7 +391,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.529468993 -0800
+++ /tmp/foob	2017-01-13 01:43:02.529468993 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -40,9 +40,9 @@
 	 #################################################################
 	 #################################################################
 	 ####################################################
-	 3.5 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 5523568 (544870 hex)
+Bytes transferred = 5524408 (544bb8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -53,7 +53,7 @@
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x544870 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x544bb8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -62,7 +62,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri Jan 13 01:33:16 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -295,8 +295,8 @@
 Segment Routing with IPv6
 mip6: Mobile IPv6
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
@@ -333,11 +333,11 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_RUN: supplied by +3.3V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-+3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
 tegra-sor 54540000.sor: failed to probe output: -517
 panel supply power not found, using dummy regulator
@@ -364,9 +364,9 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
@@ -380,7 +380,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -392,14 +392,13 @@
   #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
-input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-usb 1-3: new high-speed USB device number 3 using tegra-xusb
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+bash: no j[    2.626974] input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+ob control in this shell
+root@(none):/# [    2.973774] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.537469024 -0800
+++ /tmp/foob	2017-01-13 01:43:02.537469024 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800564 us
+Bootloader-Cpu Init at (time stamp): 1800604 us
 
 Pinmux changes applied in kernel way
 
@@ -59,23 +59,23 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 3 us
+Board Id Read Time: 4 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800538  us
-Bootloader (AosInit) time: 733483 us
-Bootloader Main Init time: 180229 us
-BlockDevMgrInit time: 157546 us
+Miscellaneous avp time: 1800577  us
+Bootloader (AosInit) time: 733438 us
+Bootloader Main Init time: 180250 us
+BlockDevMgrInit time: 157496 us
 PartMgrInit time: 8 us
 StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77111 us 
-Display init time: 574409 us
+Partition Table load: 77088 us 
+Display init time: 574433 us
 Kernel read time: 378 msec
 Load Kernel Size:   16304128 Bytes
 Bl Kernel ReadSpeed: 43132000 Bytes/sec
-Pre-Kernel Jump time: 1740455 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5842351 us
+Pre-Kernel Jump time: 1740356 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5844435 us
 Booting Linux on physical CPU 0x0
 Linux version 4.8.0-239303-g3477d16 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Oct 7 01:12:37 PDT 2016
 Boot CPU: AArch64 Processor [4e0f0000]
@@ -184,7 +184,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(1.179:1): initialized
+audit: type=2000 audit(1.131:1): initialized
 workingset: timestamp_bits=46 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -251,9 +251,10 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-+VDD_LED: supplied by +VDD_MUX
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
++VDD_LED: supplied by +VDD_MUX
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
@@ -272,9 +273,6 @@
 Freeing unused kernel memory: 960K (ffff800000c00000 - ffff800000cf0000)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.541469039 -0800
+++ /tmp/foob	2017-01-13 01:43:02.545469053 -0800
@@ -1 +1,363 @@
-ææææþÀæøàæææÀæøæøøøÆÀøàæøÀ8øàæàþøææÆæææ>þàøàæææàæøæøøøæàøàæøàøàæÀþøææàææàæøææþÀæøàæææþàÀæææææøÀæøøÆàææÀàæææþøàææøæÀþææþæææøæàþææþàææààæþææàþæøææàþàææøæøææøøæÆþæÆøøææøæøøææøæþþÀæÀææàÆøþøÆæÆàææþææøæøþæþøþæàæøþøæææÀææþæþøøÀæàæøþøæææàæ>æþþøæøæøøæøÀæààææøæþæþæÆæàæøþøæææÀææþøæøøæøÀæààææøæþæþæÆàæàæøþøæææÀææþøææææþÀæøÀæøøæþæþæþþøæÀæøþøæÆæÀÆæþøææ>øþæþææøæøþøææøæøøæøææþÆþøæøæææøøþøæøææøæþøÆæàÀàæÀææøþþøþþæþàææþÀþøøàøæÆþÀæàþþæøþÀæþøÀæææææøàæþøæøøàøæþÆøææÀæøøþæàþøøæøææÀææÆþÀøæÀøæþæþàææþÀæÀøæøæøÀæþææøøæøøæøæø8øàææææàæøæþàæøþøæàøæþþàæþøþøþÀæþàæàøææøøæÆàÆþàøæÆþþøþàøæøææþæøøæææææþàææææææàÆÀæÀàæøàæøææøþøø8ææþàæÀþþæøþàæþøàÆæææøÀæþøæøøÀøæþæøææàæøøþæþøøæøææÀæøþþÆÆàþøàÆæøÆæøþææøøøæææøæþæøàøàææøææøþææþæøææþøþøþææøøæææþøæææàææÀæøøþàæþøþøæþÆø>øøøææþææøæþøæàþþææÀæÆæÀÆþæøæøþ>æÀææææþøæææàææÀæøøþàæþàøþøæþÆøøøøææàæþæøæøþæÀæÆÆøþþÆþæàøæÀæøæøæàæøøþææøàøþøþþææøæøæþæøøø8þþææøæàæþæøæøþæàæøæàæøøþææøàøþþæøæþøæþæøøøþæøæþÀæþæøæøþæàÆæÆæøæþæøþæøþþøæþæøææþàææàøæøææøþàææþÀææÀøÆøææøþøææþÀææÀøÆøææøþøÆæþàÆæàøæøææøþææþàææàøæøææøþææ
\ No newline at end of file
+
+U-Boot SPL 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39)
+
+
+U-Boot 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39)
+
+TEGRA20
+Model: Compulab TrimSlice board
+DRAM:  1 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+SF: Detected W25Q80BL with page size 256 Bytes, erase size 4 KiB, total 1 MiB
+tegra-pcie: PCI regions:
+tegra-pcie:   I/O: 0x82000000-0x82010000
+tegra-pcie:   non-prefetchable memory: 0xa0000000-0xa8000000
+tegra-pcie:   prefetchable memory: 0xa8000000-0xc0000000
+tegra-pcie: dual-mode configuration
+tegra-pcie: probing port 0, using 2 lanes
+In:    serial
+Out:   serial
+Err:   serial
+Net:   RTL8169#0
+Hit any key to stop autoboot:  2  0 
+Tegra20 (TrimSlice) # 
+Tegra20 (TrimSlice) # usb reset
+resetting USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 3 USB Device(s) found
+USB1:   USB EHCI 1.00
+scanning bus 1 for devices... 1 USB Device(s) found
+USB2:   lowlevel init failed
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
+Tegra20 (TrimSlice) # setenv ipaddr 192.168.100.103; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra20 (TrimSlice) # tftpboot 0x00408000 zImage.multi_v7_defconfig
+Using RTL8169#0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.103
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x408000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #####################################################
+	 4.1 MiB/s
+done
+Bytes transferred = 7446568 (71a028 hex)
+Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
+Using RTL8169#0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.103
+Filename 'tegra20-trimslice.dtb'.
+Load address: 0x2408000
+Loading: *##
+	 3.4 MiB/s
+done
+Bytes transferred = 21404 (539c hex)
+Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
+Kernel image @ 0x408000 [ 0x000000 - 0x71a028 ]
+## Flattened Device Tree blob at 02408000
+   Booting using the fdt blob at 0x2408000
+   Using Device Tree in place at 02408000, end 0241039b
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Jan 13 01:33:13 PST 2017
+CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+OF: fdt:Machine model: Compulab TrimSlice board
+debug: ignoring loglevel setting.
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 64 MiB at 0x3c000000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 262144
+free_area_init_node: node 0, pgdat c1432080, node_mem_map ef7f8000
+  DMA zone: 1536 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 196608 pages, LIFO batch:31
+  HighMem zone: 65536 pages, LIFO batch:15
+percpu: Embedded 16 pages/cpu @ef7c6000 s34304 r8192 d23040 u65536
+pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096
+pcpu-alloc: [0] 0 [0] 1 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 955712K/1048576K available (9216K kernel code, 1230K rwdata, 4172K rodata, 2048K init, 467K bss, 27328K reserved, 65536K cma-reserved, 196608K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0c00000   (10208 kB)
+      .init : 0xc1100000 - 0xc1300000   (2048 kB)
+      .data : 0xc1300000 - 0xc1433b80   (1231 kB)
+       .bss : 0xc1435000 - 0xc14a9d28   ( 468 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
+Hierarchical RCU implementation.
+	RCU debugfs-based tracing is enabled.
+	Build-time adjustment of leaf fanout to 32.
+	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 errata 727915 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 ID prefetch enabled, offset 1 lines
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x300000 - 0x300098
+Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2
+EFI services will not be available.
+smp: Bringing up secondary CPUs ...
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+smp: Brought up 1 node, 2 CPUs
+SMP: Total of 2 processors activated (4.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+Serial: AMBA PL011 UART driver
+usb1_vbus: Failed to request enable GPIO170: -517
+reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+clocksource: Switched to clocksource timer_us
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
+futex hash table entries: 512 (order: 3, 32768 bytes)
+workingset: timestamp_bits=30 max_order=18 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.32 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+tegra-pcie 80003000.pcie-controller: dual-mode configuration
+tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff]
+pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
+pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
+pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x52 may corrupt adjacent RW1C bits
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+Disabling cpuidle LP2 state, since PCIe IRQs are in use
+pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
+pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
+pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa00fffff]
+pci 0000:00:01.0:   bridge window [mem 0xa8000000-0xa80fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0143)
+pcieport 0000:00:01.0: Signaling PME with IRQ 295
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+STMicroelectronics ASC driver initialized
+54280000.hdmi supply hdmi not found, using dummy regulator
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+brd: module loaded
+loop: module loaded
+m25p80 spi32766.0: found s25fl008k, expected w25q80bl
+m25p80 spi32766.0: s25fl008k (1024 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08fc000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+tegra-phy c5004000.usb-phy: no vbus regulator
+tegra-phy c5008000.usb-phy: no vbus regulator
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
+tegra-ehci: Tegra EHCI driver
+ulpi_phy_power_on: ulpi write failed
+tegra-ehci c5004000.usb: Failed to power on the phy
+tegra-ehci: probe of c5004000.usb failed with error -110
+tegra-ehci c5008000.usb: EHCI Host Controller
+tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
+tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
+usbcore: registered new interface driver usb-storage
+mousedev: PS/2 mouse device common for all mice
+rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
+sdhci-tegra c8000600.sdhci: Got CD GPIO
+sdhci-tegra c8000600.sdhci: Got WP GPIO
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 10
+Segment Routing with IPv6
+sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20161123 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address b368
+tegra-ehci c5000000.usb: EHCI Host Controller
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
+tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+rtc-em3027 2-0056: setting system clock to 2015-02-06 03:56:41 UTC (1423195001)
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+random: fast init done
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.549469068 -0800
+++ /tmp/foob	2017-01-13 01:43:02.553469082 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -45,9 +45,9 @@
 	 #################################################################
 	 #################################################################
 	 ####################################################
-	 4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 5523568 (544870 hex)
+Bytes transferred = 5524408 (544bb8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -58,7 +58,7 @@
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x544870 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x544bb8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -67,7 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri Jan 13 01:33:16 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -349,7 +349,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 03:44:11 UTC (1423194251)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 03:58:14 UTC (1423195094)
 ALSA device list:
   #0: tegra-trimslice
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.557469097 -0800
+++ /tmp/foob	2017-01-13 01:43:02.561469113 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 783111 us
-Basic modules init took 349007 us
+Tegraboot started after 764851 us
+Basic modules init took 348464 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14337 us
-Carveout took 252724 us
-CPU initialization took 92313 us
-Total time taken by TegraBoot 708381 us
+Next stage binary read took 14391 us
+Carveout took 252717 us
+CPU initialization took 92351 us
+Total time taken by TegraBoot 707923 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.621] LPDDR4 Training: Number of tables = 10
+64b[0001.603] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-15067648 bytes read in 799 ms (18 MiB/s)
+15069696 bytes read in 799 ms (18 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44882 bytes read in 453 ms (96.7 KiB/s)
+44882 bytes read in 461 ms (94.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 496 ms (3.1 MiB/s)
+1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-169762-geec0d3d (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Jan 11 20:24:09 PST 2017
+Linux version 4.10.0-rc3-next-20170113-170032-g41ca03c (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Jan 13 01:36:22 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -161,15 +161,15 @@
 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
-Memory: 2977848K/3131392K available (8508K kernel code, 954K rwdata, 4136K rodata, 1088K init, 387K bss, 137160K reserved, 16384K cma-reserved)
+Memory: 2977844K/3131392K available (8508K kernel code, 956K rwdata, 4140K rodata, 1088K init, 389K bss, 137164K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
     .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
       .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
-      .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
+      .data : 0xffff000008df0000 - 0xffff000008edf200   (   957 KB)
+       .bss : 0xffff000008edf200 - 0xffff000008f407b0   (   390 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -262,7 +262,7 @@
 kvm [1]: virtual timer IRQ4
 futex hash table entries: 1024 (order: 5, 131072 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.527:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.547:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=46 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -342,6 +342,6 @@
 devtmpfs: mounted
 Freeing unused kernel memory: 1088K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job contr[    1.312746] random: fast init done
+bash: no job contr[    1.346743] random: fast init done
 ol in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.565469127 -0800
+++ /tmp/foob	2017-01-13 01:43:02.569469142 -0800
@@ -1,32 +1,4 @@
-)
-percpu: Embedded 23 pages/cpu @ffff8000bff43000 s56576 r8192 d29440 u94208
-Detected PIPT I-cache on CPU0
-CPU features: enabling workaround for ARM erratum 832075
-CPU features: enabling workaround for ARM erratum 834220
-Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 735336
-Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
-PID hash table entries: 4096 (order: 3, 32768 bytes)
-Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
-Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
-software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2832032K/2988032K available (8508K kernel code, 954K rwdata, 4136K rodata, 1088K init, 387K bss, 139616K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
-    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
-      .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
-    .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
-      .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
-      .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
-    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
-    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
-    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
-              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
-    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
-SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
-Preemptible hierarchical RCU implementation.
-	Build-time adjustment of leaf fanout to 64.
-	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
+om NR_CPUS=64 to nr_cpu_ids=4.
 RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
 NR_IRQS:64 nr_irqs:64 0
 GIC: Using split EOI/Deactivate mode
@@ -46,7 +18,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x98e0: expected 0x2004f400
+boot misc3 0xa208: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -59,7 +31,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-169762-geec0d3d (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Jan 11 20:24:09 PST 2017
+Linux version 4.10.0-rc3-next-20170113-170032-g41ca03c (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Jan 13 01:36:22 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -80,15 +52,15 @@
 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
-Memory: 2832032K/2988032K available (8508K kernel code, 954K rwdata, 4136K rodata, 1088K init, 387K bss, 139616K reserved, 16384K cma-reserved)
+Memory: 2832032K/2988032K available (8508K kernel code, 956K rwdata, 4140K rodata, 1088K init, 389K bss, 139616K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
       .text : 0xffff000008080000 - 0xffff0000088d0000   (  8512 KB)
     .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
       .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
-      .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
+      .data : 0xffff000008df0000 - 0xffff000008edf200   (   957 KB)
+       .bss : 0xffff000008edf200 - 0xffff000008f407b0   (   390 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -117,7 +89,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x98e0: expected 0x2004f400
+boot misc3 0xa208: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -195,7 +167,7 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 Unpacking initramfs...
-Freeing initrd memory: 2364K
+Freeing initrd memory: 2360K
 kvm [1]: 8-bit VMID
 kvm [1]: IDMAP page: 808bf000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
@@ -205,7 +177,7 @@
 kvm [1]: virtual timer IRQ4
 futex hash table entries: 1024 (order: 5, 131072 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.335:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.331:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=46 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -297,7 +269,7 @@
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2000-10-23 09:52:17 UTC (972294737)
+max77686-rtc max77620-rtc: setting system clock to 2000-10-24 15:04:45 UTC (972399885)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_AVDD: disabling
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.573469156 -0800
+++ /tmp/foob	2017-01-13 01:43:02.577469170 -0800
@@ -41,18 +41,18 @@
 	 #####################################################
 	 3.2 MiB/s
 done
-Bytes transferred = 7446616 (71a058 hex)
+Bytes transferred = 7446568 (71a028 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x71a058 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x71a028 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Fri Jan 13 01:33:13 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994812K/2096128K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35780K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994812K/2096128K available (9216K kernel code, 1230K rwdata, 4172K rodata, 2048K init, 467K bss, 35780K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -303,8 +303,8 @@
 usb1_vbus: supplied by vdd_5v_in
 usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 mmc1: new high speed MMC card at address 0001
@@ -314,8 +314,8 @@
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -395,5 +395,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.083576] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.073563] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-13 01:43:02.581469186 -0800
+++ /tmp/foob	2017-01-13 01:43:02.585469201 -0800
@@ -37,9 +37,9 @@
 	 #################################################################
 	 #################################################################
 	 ####################################################
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 5523568 (544870 hex)
+Bytes transferred = 5524408 (544bb8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -50,7 +50,7 @@
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x544870 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x544bb8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
+Linux version 4.10.0-rc3-next-20170113-145599-g41ca03c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Fri Jan 13 01:33:16 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -198,12 +198,12 @@
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1"
@@ -306,8 +306,8 @@
 usb1_vbus: supplied by vdd_5v_in
 usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
@@ -390,4 +390,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.340525] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.360519] usb 2-1: new high-speed USB device number 2 using tegra-ehci
