Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.755801095 -0800
+++ /tmp/foob	2017-01-11 20:29:14.759801110 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-169366-g4301f6c (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jan 10 19:38:27 PST 2017
+Linux version 4.10.0-rc3-next-20170112-169762-geec0d3d (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Jan 11 20:24:09 PST 2017
 Boot CPU: AArch64 Processor [411fd070]
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -9,7 +9,7 @@
 psci: PSCIv0.2 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: Trusted OS migration not required
-percpu: Embedded 23 pages/cpu @ffff80003efd3000 s56448 r8192 d29568 u94208
+percpu: Embedded 23 pages/cpu @ffff80003efd3000 s56576 r8192 d29440 u94208
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -26,7 +26,7 @@
     .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
       .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
       .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f630   (   388 KB)
+       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -101,7 +101,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.680:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.688:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=46 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -167,7 +167,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-01-11 03:39:09 UTC (1484105949)
+rtc-pl031 9010000.pl031: setting system clock to 2017-01-12 04:24:52 UTC (1484195092)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.767801140 -0800
+++ /tmp/foob	2017-01-11 20:29:14.767801140 -0800
@@ -38,21 +38,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################################
+	 #####################################################
 	 3.1 MiB/s
 done
-Bytes transferred = 7441752 (718d58 hex)
+Bytes transferred = 7446616 (71a058 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x718d58 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x71a058 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 10 19:35:03 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -71,20 +71,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c142c880, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1432080, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef9c000 s34240 r8192 d23104 u65536
-pcpu-alloc: s34240 r8192 d23104 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef9c000 s34304 r8192 d23040 u65536
+pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994912K/2096128K available (9216K kernel code, 1208K rwdata, 4164K rodata, 2048K init, 467K bss, 35680K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994892K/2096128K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35700K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142e380   (1209 kB)
-       .bss : 0xc1430000 - 0xc14a4c28   ( 468 kB)
+      .data : 0xc1300000 - 0xc1433b80   (1231 kB)
+       .bss : 0xc1435000 - 0xc14a9d28   ( 468 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -304,32 +304,32 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
+mmc0: new high speed SDHC card at address aaaa
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
-mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
- mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 [drm] Cannot find any crtc or sizes - going 1024x768
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 mmc1: new high speed MMC card at address 0001
+ mmcblk0: p1 p2 p3
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-04 15:07:49 UTC (973350469)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-05 15:53:10 UTC (973439590)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -341,4 +341,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.429360] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.419570] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.787801215 -0800
+++ /tmp/foob	2017-01-11 20:29:14.787801215 -0800
@@ -36,10 +36,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################################
-	 3.4 MiB/s
+	 ####################################################
+	 3.1 MiB/s
 done
-Bytes transferred = 5519152 (543730 hex)
+Bytes transferred = 5523568 (544870 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -50,7 +50,7 @@
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x543730 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x544870 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 10 19:34:38 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -69,20 +69,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f440, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5ea40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef9b000 s34432 r8192 d22912 u65536
-pcpu-alloc: s34432 r8192 d22912 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef9b000 s34496 r8192 d22848 u65536
+pcpu-alloc: s34496 r8192 d22848 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999928K/2096128K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 364K bss, 30664K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999928K/2096128K available (8192K kernel code, 384K rwdata, 2480K rodata, 1024K init, 364K bss, 30664K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,8 +92,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60b00   ( 387 kB)
-       .bss : 0xc0d62000 - 0xc0dbd240   ( 365 kB)
+      .data : 0xc0d00000 - 0xc0d60100   ( 385 kB)
+       .bss : 0xc0d62000 - 0xc0dbd340   ( 365 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -321,7 +321,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-04 15:05:00 UTC (973350300)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-11-05 15:50:27 UTC (973439427)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -335,4 +335,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.710640] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.700191] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.807801291 -0800
+++ /tmp/foob	2017-01-11 20:29:14.811801306 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,21 +33,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################################
-	 3.6 MiB/s
+	 #####################################################
+	 4 MiB/s
 done
-Bytes transferred = 7441752 (718d58 hex)
+Bytes transferred = 7446616 (71a058 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 910.2 KiB/s
+	 3.8 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x718d58 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x71a058 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 10 19:35:03 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -66,20 +66,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c142c880, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1432080, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef86000 s34240 r8192 d23104 u65536
-pcpu-alloc: s34240 r8192 d23104 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef86000 s34304 r8192 d23040 u65536
+pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994792K/2096128K available (9216K kernel code, 1208K rwdata, 4164K rodata, 2048K init, 467K bss, 35800K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994772K/2096128K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35820K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,8 +89,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142e380   (1209 kB)
-       .bss : 0xc1430000 - 0xc14a4c28   ( 468 kB)
+      .data : 0xc1300000 - 0xc1433b80   (1231 kB)
+       .bss : 0xc1435000 - 0xc14a9d28   ( 468 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -325,26 +325,26 @@
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 ------------[ cut here ]------------
-WARNING: CPU: 2 PID: 92 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
+WARNING: CPU: 2 PID: 60 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 2 PID: 92 Comm: kworker/2:1 Not tainted 4.10.0-rc3-next-20170111-144933-g4301f6c #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Not tainted 4.10.0-rc3-next-20170112-145329-geec0d3d #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059af30>] (dump_stack+0x84/0xa4)
-[<c059af30>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
-[<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
-[<c0341bd8>] (warn_slowpath_null) from [<c07dfba0>] (driver_probe_device+0x288/0x2c0)
-[<c07dfba0>] (driver_probe_device) from [<c07de094>] (bus_for_each_drv+0x44/0x8c)
-[<c07de094>] (bus_for_each_drv) from [<c07df890>] (__device_attach+0x9c/0x100)
-[<c07df890>] (__device_attach) from [<c07def2c>] (bus_probe_device+0x84/0x8c)
-[<c07def2c>] (bus_probe_device) from [<c07df360>] (deferred_probe_work_func+0x60/0x8c)
-[<c07df360>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
-[<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
-[<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
-[<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
-[<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace f3b957060d9fd4a4 ]---
+[<c030b158>] (show_stack) from [<c059c314>] (dump_stack+0x84/0xa4)
+[<c059c314>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
+[<c0341b94>] (__warn) from [<c0341be0>] (warn_slowpath_null+0x20/0x28)
+[<c0341be0>] (warn_slowpath_null) from [<c07e1048>] (driver_probe_device+0x288/0x2c0)
+[<c07e1048>] (driver_probe_device) from [<c07df53c>] (bus_for_each_drv+0x44/0x8c)
+[<c07df53c>] (bus_for_each_drv) from [<c07e0d38>] (__device_attach+0x9c/0x100)
+[<c07e0d38>] (__device_attach) from [<c07e03d4>] (bus_probe_device+0x84/0x8c)
+[<c07e03d4>] (bus_probe_device) from [<c07e0808>] (deferred_probe_work_func+0x60/0x8c)
+[<c07e0808>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
+[<c0357084>] (process_one_work) from [<c03572b4>] (process_scheduled_works+0x28/0x38)
+[<c03572b4>] (process_scheduled_works) from [<c03574dc>] (worker_thread+0x218/0x4f0)
+[<c03574dc>] (worker_thread) from [<c035c854>] (kthread+0xfc/0x134)
+[<c035c854>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
+---[ end trace 8b75dd667b9dab31 ]---
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
@@ -359,28 +359,28 @@
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
 ------------[ cut here ]------------
-WARNING: CPU: 2 PID: 92 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
+WARNING: CPU: 2 PID: 60 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
 Modules linked in:
-CPU: 2 PID: 92 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc3-next-20170111-144933-g4301f6c #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc3-next-20170112-145329-geec0d3d #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059af30>] (dump_stack+0x84/0xa4)
-[<c059af30>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
-[<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
-[<c0341bd8>] (warn_slowpath_null) from [<c06e8268>] (regulator_unregister+0xc0/0xcc)
-[<c06e8268>] (regulator_unregister) from [<c07e2a58>] (release_nodes+0x164/0x1dc)
-[<c07e2a58>] (release_nodes) from [<c07df9c4>] (driver_probe_device+0xac/0x2c0)
-[<c07df9c4>] (driver_probe_device) from [<c07de094>] (bus_for_each_drv+0x44/0x8c)
-[<c07de094>] (bus_for_each_drv) from [<c07df890>] (__device_attach+0x9c/0x100)
-[<c07df890>] (__device_attach) from [<c07def2c>] (bus_probe_device+0x84/0x8c)
-[<c07def2c>] (bus_probe_device) from [<c07df360>] (deferred_probe_work_func+0x60/0x8c)
-[<c07df360>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
-[<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
-[<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
-[<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
-[<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace f3b957060d9fd4a5 ]---
+[<c030b158>] (show_stack) from [<c059c314>] (dump_stack+0x84/0xa4)
+[<c059c314>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
+[<c0341b94>] (__warn) from [<c0341be0>] (warn_slowpath_null+0x20/0x28)
+[<c0341be0>] (warn_slowpath_null) from [<c06e96ac>] (regulator_unregister+0xc0/0xcc)
+[<c06e96ac>] (regulator_unregister) from [<c07e3f00>] (release_nodes+0x164/0x1dc)
+[<c07e3f00>] (release_nodes) from [<c07e0e6c>] (driver_probe_device+0xac/0x2c0)
+[<c07e0e6c>] (driver_probe_device) from [<c07df53c>] (bus_for_each_drv+0x44/0x8c)
+[<c07df53c>] (bus_for_each_drv) from [<c07e0d38>] (__device_attach+0x9c/0x100)
+[<c07e0d38>] (__device_attach) from [<c07e03d4>] (bus_probe_device+0x84/0x8c)
+[<c07e03d4>] (bus_probe_device) from [<c07e0808>] (deferred_probe_work_func+0x60/0x8c)
+[<c07e0808>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
+[<c0357084>] (process_one_work) from [<c03572b4>] (process_scheduled_works+0x28/0x38)
+[<c03572b4>] (process_scheduled_works) from [<c03574dc>] (worker_thread+0x218/0x4f0)
+[<c03574dc>] (worker_thread) from [<c035c854>] (kthread+0xfc/0x134)
+[<c035c854>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
+---[ end trace 8b75dd667b9dab32 ]---
 tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -402,48 +402,48 @@
 [000dbd9c] *pgd=00000000
 Internal error: Oops: 5 [#1] SMP ARM
 Modules linked in:
-CPU: 2 PID: 92 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc3-next-20170111-144933-g4301f6c #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc3-next-20170112-145329-geec0d3d #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
-task: ee738000 task.stack: ee732000
+task: ee3d8fc0 task.stack: ee45c000
 PC is at regulator_enable+0x18/0x120
 LR is at regulator_enable+0x28/0x120
-pc : [<c06e8450>]    lr : [<c06e8460>]    psr: 60000113
-sp : ee733cb8  ip : 00000000  fp : c1302d00
-r10: ee7f5458  r9 : 00000003  r8 : c0d3ae08
-r7 : 00000000  r6 : 00000000  r5 : 000dbba0  r4 : ee7f5410
-r3 : 00000080  r2 : 00000000  r1 : c06e84a8  r0 : ee7909c0
+pc : [<c06e9894>]    lr : [<c06e98a4>]    psr: 60000113
+sp : ee45dcb8  ip : 00000000  fp : c1302d00
+r10: ee7e5858  r9 : 00000003  r8 : c0d3bd88
+r7 : 00000000  r6 : 00000000  r5 : 000dbba0  r4 : ee7e5810
+r3 : 00000080  r2 : 00000000  r1 : c06e98ec  r0 : ee784c80
 Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
 Control: 10c5387d  Table: 8020406a  DAC: 00000051
-Process kworker/2:1 (pid: 92, stack limit = 0xee732220)
-Stack: (0xee733cb8 to 0xee734000)
-3ca0:                                                       ee7f5410 ee757c00
-3cc0: 00000000 c06e8460 ee7f5410 ee755400 00000000 c06e8460 ee7f5410 00000000
-3ce0: 00000000 c07ce38c 00000000 ee584010 ee7f5410 ee57bbe8 00000000 ee57ba00
-3d00: ee57bbd4 ee57ba00 ee791480 c0753320 00000000 00000000 00000000 00000001
-3d20: ee7f5800 c07c6870 00000000 00000001 ffffffff 00000000 ee7f5800 00000000
-3d40: 00000000 c14014e4 00000000 00000000 ee79b940 c0775a0c 00000000 ee7f5800
-3d60: c14014e4 ee57ba10 00000000 ee7f5800 ee57ba00 00000000 00000000 c14015fc
-3d80: 00000010 c07c640c c07c63dc ee57ba10 c1474ec8 c075304c c0753030 c07dfb14
-3da0: 00000000 00000000 ee733dd8 c07dfcbc 00000001 c1474ea4 00000000 c07de094
-3dc0: ee57e16c ee58a238 ee57ba10 ee57ba44 c13fff20 c07df890 ee57ba10 00000001
-3de0: 00000000 ee57ba10 ee57ba10 c13fff20 ee1a1e10 c07def2c ee57ba10 00000000
-3e00: ee57ba18 c07dd3a0 00000000 0000001c c07cd9ac 00000000 ee57ba00 ee7f5410
-3e20: ee56df80 ee57bbd4 ee57bbb0 eefad740 ee57ba10 c0753218 eefc9974 ee57b984
-3e40: c13fff88 c13ffef0 ee7f5410 ee57b810 00000010 c0753b40 ee7f5410 ee1e2410
-3e60: 00000000 ee1e2400 00000000 c07d003c 00000000 ee1a7100 ee7f5410 00000000
-3e80: fffffffe ee1e2410 fffffdfb c1401760 c1401760 c07e1278 c07e1228 ee1e2410
-3ea0: c1474ec8 00000000 00000000 c07dfb14 00000000 00000000 ee733ee8 c07dfcbc
-3ec0: 00000001 00000000 00000000 c07de094 ee04276c ee58a338 ee1e2410 ee1e2444
-3ee0: c1401cb8 c07df890 ee1e2410 00000001 ee063f00 ee1e2410 ee1e2410 c1401cb8
-3f00: eefb0800 c07def2c ee1e2410 c1401c38 c1401c54 c07df360 ee0d4780 c1401c5c
-3f20: eefad740 c0356fc4 ee0d4780 c0bedd18 ee0d4780 ee0d4798 00000001 eefad740
-3f40: ee0d4798 eefad740 00000008 c03571f4 eefb08f5 ee0d4780 eefad758 c035741c
-3f60: ee0b3ee0 ee1c1400 00000000 ee1c1400 00000000 ee1c1380 ee1c141c ee0d4780
-3f80: ee0b3ee0 c0357204 00000000 c035c794 ee1c1380 c035c698 00000000 00000000
-3fa0: 00000000 00000000 00000000 c0307f78 00000000 00000000 00000000 00000000
-3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
-[<c06e8450>] (regulator_enable) from [<c06e8460>] (regulator_enable+0x28/0x120)
+Process kworker/2:1 (pid: 60, stack limit = 0xee45c220)
+Stack: (0xee45dcb8 to 0xee45e000)
+dca0:                                                       ee7e5810 ee7e4c00
+dcc0: 00000000 c06e98a4 ee7e5810 ee47a400 00000000 c06e98a4 ee7e5810 00000000
+dce0: 00000000 c07cf834 00000000 ee5a4010 ee7e5810 ee5779e8 00000000 ee577800
+dd00: ee5779d4 ee577800 ee785480 c0754780 00000000 00000000 00000000 00000001
+dd20: ee7e5c00 c07c7d18 00000000 00000001 ffffffff 00000000 ee7e5c00 00000000
+dd40: 00000000 c1406cdc 00000000 00000000 ee78ecc0 c0776e6c 00000000 ee7e5c00
+dd60: c1406cdc ee577810 00000000 ee7e5c00 ee577800 00000000 00000000 c1406df4
+dd80: 00000010 c07c78b4 c07c7884 ee577810 c1479fc8 c07544ac c0754490 c07e0fbc
+dda0: 00000000 00000000 ee45ddd8 c07e1164 00000001 c1479fa4 00000000 c07df53c
+ddc0: ee57f16c ee582638 ee577810 ee577844 c1405718 c07e0d38 ee577810 00000001
+dde0: 00000000 ee577810 ee577810 c1405718 ee1a1e10 c07e03d4 ee577810 00000000
+de00: ee577818 c07de848 00000000 0000001c c07cee54 00000000 ee577800 ee7e5810
+de20: ee57cb80 ee5779d4 ee5779b0 eefad780 ee577810 c0754678 eefc9974 ee577784
+de40: c1405780 c14056e8 ee7e5810 ee577610 00000010 c0754fa0 ee7e5810 ee1e2410
+de60: 00000000 ee1e2400 00000000 c07d14e4 00000000 ee1a7100 ee7e5810 00000000
+de80: fffffffe ee1e2410 fffffdfb c1406f58 c1406f58 c07e2720 c07e26d0 ee1e2410
+dea0: c1479fc8 00000000 00000000 c07e0fbc 00000000 00000000 ee45dee8 c07e1164
+dec0: 00000001 00000000 00000000 c07df53c ee04276c ee582738 ee1e2410 ee1e2444
+dee0: c14074b0 c07e0d38 ee1e2410 00000001 ee063f00 ee1e2410 ee1e2410 c14074b0
+df00: eefb0800 c07e03d4 ee1e2410 c1407430 c140744c c07e0808 ee1c4080 c1407454
+df20: eefad780 c0357084 ee1c4080 c0bef4f8 ee1c4080 ee1c4098 00000001 eefad780
+df40: ee1c4098 eefad780 00000008 c03572b4 eefb08f5 ee1c4080 eefad798 c03574dc
+df60: ee0b3ee0 ee0d2600 00000000 ee0d2600 00000000 ee1c1140 ee0d261c ee1c4080
+df80: ee0b3ee0 c03572c4 00000000 c035c854 ee1c1140 c035c758 00000000 00000000
+dfa0: 00000000 00000000 00000000 c0307f78 00000000 00000000 00000000 00000000
+dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
+[<c06e9894>] (regulator_enable) from [<c06e98a4>] (regulator_enable+0x28/0x120)
 Code: e5905030 e3130001 13a04000 1a000015 (e59501fc) 
----[ end trace f3b957060d9fd4a6 ]---
+---[ end trace 8b75dd667b9dab33 ]---
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.827801366 -0800
+++ /tmp/foob	2017-01-11 20:29:14.831801382 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -31,21 +31,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################################
-	 3.9 MiB/s
+	 ####################################################
+	 4 MiB/s
 done
-Bytes transferred = 5519152 (543730 hex)
+Bytes transferred = 5523568 (544870 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x543730 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x544870 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -54,7 +54,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 10 19:34:38 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -64,20 +64,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f440, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5ea40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef85000 s34432 r8192 d22912 u65536
-pcpu-alloc: s34432 r8192 d22912 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef85000 s34496 r8192 d22848 u65536
+pcpu-alloc: s34496 r8192 d22848 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999808K/2096128K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 364K bss, 30784K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999808K/2096128K available (8192K kernel code, 384K rwdata, 2480K rodata, 1024K init, 364K bss, 30784K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -87,8 +87,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60b00   ( 387 kB)
-       .bss : 0xc0d62000 - 0xc0dbd240   ( 365 kB)
+      .data : 0xc0d00000 - 0xc0d60100   ( 385 kB)
+       .bss : 0xc0d62000 - 0xc0dbd340   ( 365 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -334,26 +334,26 @@
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
 Modules linked in:
-CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.10.0-rc3-next-20170111-144933-g4301f6c #1
+CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.10.0-rc3-next-20170112-145329-geec0d3d #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c010f308>] (unwind_backtrace) from [<c010a900>] (show_stack+0x10/0x14)
-[<c010a900>] (show_stack) from [<c034e25c>] (dump_stack+0x84/0xa4)
-[<c034e25c>] (dump_stack) from [<c011fb34>] (__warn+0xd4/0x100)
-[<c011fb34>] (__warn) from [<c011fb80>] (warn_slowpath_null+0x20/0x28)
-[<c011fb80>] (warn_slowpath_null) from [<c03db964>] (regulator_unregister+0xc0/0xcc)
-[<c03db964>] (regulator_unregister) from [<c046ab20>] (release_nodes+0x164/0x1dc)
-[<c046ab20>] (release_nodes) from [<c0467ab8>] (driver_probe_device+0xac/0x2c0)
-[<c0467ab8>] (driver_probe_device) from [<c0466198>] (bus_for_each_drv+0x44/0x8c)
-[<c0466198>] (bus_for_each_drv) from [<c0467984>] (__device_attach+0x9c/0x100)
-[<c0467984>] (__device_attach) from [<c0467020>] (bus_probe_device+0x84/0x8c)
-[<c0467020>] (bus_probe_device) from [<c0467454>] (deferred_probe_work_func+0x60/0x8c)
-[<c0467454>] (deferred_probe_work_func) from [<c0134bb4>] (process_one_work+0x120/0x320)
-[<c0134bb4>] (process_one_work) from [<c0134ddc>] (process_scheduled_works+0x28/0x38)
-[<c0134ddc>] (process_scheduled_works) from [<c0134ff0>] (worker_thread+0x204/0x4b4)
-[<c0134ff0>] (worker_thread) from [<c013a330>] (kthread+0xfc/0x134)
-[<c013a330>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
----[ end trace 455174bfae007248 ]---
+[<c010a900>] (show_stack) from [<c034fe3c>] (dump_stack+0x84/0xa4)
+[<c034fe3c>] (dump_stack) from [<c011fb3c>] (__warn+0xd4/0x100)
+[<c011fb3c>] (__warn) from [<c011fb88>] (warn_slowpath_null+0x20/0x28)
+[<c011fb88>] (warn_slowpath_null) from [<c03dd5e4>] (regulator_unregister+0xc0/0xcc)
+[<c03dd5e4>] (regulator_unregister) from [<c046c7e8>] (release_nodes+0x164/0x1dc)
+[<c046c7e8>] (release_nodes) from [<c0469780>] (driver_probe_device+0xac/0x2c0)
+[<c0469780>] (driver_probe_device) from [<c0467e60>] (bus_for_each_drv+0x44/0x8c)
+[<c0467e60>] (bus_for_each_drv) from [<c046964c>] (__device_attach+0x9c/0x100)
+[<c046964c>] (__device_attach) from [<c0468ce8>] (bus_probe_device+0x84/0x8c)
+[<c0468ce8>] (bus_probe_device) from [<c046911c>] (deferred_probe_work_func+0x60/0x8c)
+[<c046911c>] (deferred_probe_work_func) from [<c0134c70>] (process_one_work+0x120/0x320)
+[<c0134c70>] (process_one_work) from [<c0134e98>] (process_scheduled_works+0x28/0x38)
+[<c0134e98>] (process_scheduled_works) from [<c01350ac>] (worker_thread+0x204/0x4b4)
+[<c01350ac>] (worker_thread) from [<c013a3ec>] (kthread+0xfc/0x134)
+[<c013a3ec>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
+---[ end trace 21a7ee500acf6b33 ]---
 tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -377,48 +377,48 @@
 [0000021c] *pgd=00000000
 Internal error: Oops: 5 [#1] PREEMPT SMP ARM
 Modules linked in:
-CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: G        W       4.10.0-rc3-next-20170111-144933-g4301f6c #1
+CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: G        W       4.10.0-rc3-next-20170112-145329-geec0d3d #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 task: ee8b4200 task.stack: ee998000
 PC is at regulator_enable+0x18/0x120
 LR is at regulator_enable+0x28/0x120
-pc : [<c03dbb4c>]    lr : [<c03dbb5c>]    psr: 60000113
+pc : [<c03dd7cc>]    lr : [<c03dd7dc>]    psr: 60000113
 sp : ee999cb8  ip : 00000000  fp : c0d02d00
-r10: ee224c58  r9 : 00000003  r8 : c0955460
-r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : ee224c10
-r3 : 00000000  r2 : 00000000  r1 : c03dbba4  r0 : ee21c900
+r10: ee200c58  r9 : 00000003  r8 : c09554a0
+r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : ee200c10
+r3 : 00000000  r2 : 00000000  r1 : c03dd824  r0 : ee1fb500
 Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
 Control: 10c5387d  Table: 8000406a  DAC: 00000051
 Process kworker/0:1 (pid: 29, stack limit = 0xee998210)
 Stack: (0xee999cb8 to 0xee99a000)
-9ca0:                                                       ee224c10 ee21f800
-9cc0: 00000000 c03dbb5c ee224c10 ee1fd400 00000000 c03dbb5c ee224c10 00000000
-9ce0: 00000000 c04564e0 00000000 eeb80810 ee224c10 ee03e608 00000000 ee03e400
-9d00: ee03e5f0 ee03e400 ee1c8cc0 c0413288 00000000 00000000 00000000 00000001
-9d20: ee224800 c044e938 00000000 00000001 ffffffff 00000000 ee224800 00000000
-9d40: 00000000 c0d3651c 00000000 00000000 ee231040 c0434ee0 c0d3651c ee03e410
-9d60: 00000000 c0d36634 00000000 ee224800 ee03e400 00000000 00000000 c0d36634
-9d80: 00000011 c044e4d4 c044e4a4 ee03e410 c0dadebc c0412fb4 c0412f98 c0467c08
-9da0: 00000000 00000000 ee999dd8 c0467db0 00000001 c0dade98 00000000 c0466198
-9dc0: eea82170 eebd63b8 ee03e410 ee03e444 c0d36080 c0467984 ee03e410 00000001
-9de0: 00000000 ee03e410 ee03e410 c0d36080 ee988010 c0467020 ee03e410 00000000
-9e00: ee03e418 c04654c4 00000000 0000001c c0455b00 00000000 ee03e400 ee224c10
-9e20: eebd7380 ee03e5f0 ee03e5c8 eef8c5c0 ee03e410 c0413180 eefc8974 eeb68dac
-9e40: c0d360ec c0d36048 ee224c10 eeb68c10 00000011 c0413a94 ee224c10 ee994a10
-9e60: 00000000 ee994a00 00000000 c0458190 00000000 ee993740 ee224c10 00000000
-9e80: ffffffed ee994a10 fffffdfb c0d36798 c0d36798 c04692a4 c0469254 ee994a10
-9ea0: c0dadebc 00000000 00000000 c0467c08 00000000 00000000 ee999ee8 c0467db0
-9ec0: 00000001 00000000 00000000 c0466198 ee888d70 eebd62b8 ee994a10 ee994a44
-9ee0: c0d36d28 c0467984 ee994a10 00000001 ee8b4200 ee994a10 ee994a10 c0d36d28
-9f00: eef8f900 c0467020 ee994a10 c0d36ca0 c0d36cc0 c0467454 ee991680 c0d36cc8
-9f20: eef8c5c0 c0134bb4 eef8c5c0 eef94500 ee991680 ee991698 00000001 eef8c5c0
-9f40: ee991698 eef8c5c0 00000008 c0134ddc eef8f9f5 ee991680 eef8c5d8 c0134ff0
+9ca0:                                                       ee200c10 ee1fa800
+9cc0: 00000000 c03dd7dc ee200c10 ee1ba400 00000000 c03dd7dc ee200c10 00000000
+9ce0: 00000000 c04581a8 00000000 eeb66810 ee200c10 ee020608 00000000 ee020400
+9d00: ee0205f0 ee020400 ee1a4cc0 c0414f08 00000000 00000000 00000000 00000001
+9d20: ee200800 c0450600 00000000 00000001 ffffffff 00000000 ee200800 00000000
+9d40: 00000000 c0d35b1c 00000000 00000000 ee20bc40 c0436b60 c0d35b1c ee020410
+9d60: 00000000 c0d35c34 00000000 ee200800 ee020400 00000000 00000000 c0d35c34
+9d80: 00000011 c045019c c045016c ee020410 c0dadfbc c0414c34 c0414c18 c04698d0
+9da0: 00000000 00000000 ee999dd8 c0469a78 00000001 c0dadf98 00000000 c0467e60
+9dc0: eea82170 eeb6c3b8 ee020410 ee020444 c0d35680 c046964c ee020410 00000001
+9de0: 00000000 ee020410 ee020410 c0d35680 ee988010 c0468ce8 ee020410 00000000
+9e00: ee020418 c046718c 00000000 0000001c c04577c8 00000000 ee020400 ee200c10
+9e20: eeb6d380 ee0205f0 ee0205c8 eef8c600 ee020410 c0414e00 eefc8974 eeb80dac
+9e40: c0d356ec c0d35648 ee200c10 eeb80c10 00000011 c0415714 ee200c10 ee994a10
+9e60: 00000000 ee994a00 00000000 c0459e58 00000000 ee993740 ee200c10 00000000
+9e80: ffffffed ee994a10 fffffdfb c0d35d98 c0d35d98 c046af6c c046af1c ee994a10
+9ea0: c0dadfbc 00000000 00000000 c04698d0 00000000 00000000 ee999ee8 c0469a78
+9ec0: 00000001 00000000 00000000 c0467e60 ee888d70 eeb6c2b8 ee994a10 ee994a44
+9ee0: c0d36328 c046964c ee994a10 00000001 ee8b4200 ee994a10 ee994a10 c0d36328
+9f00: eef8f900 c0468ce8 ee994a10 c0d362a0 c0d362c0 c046911c ee991680 c0d362c8
+9f20: eef8c600 c0134c70 eef8c600 eef94500 ee991680 ee991698 00000001 eef8c600
+9f40: ee991698 eef8c600 00000008 c0134e98 eef8f9f5 ee991680 eef8c618 c01350ac
 9f60: ee853ee0 ee98dbc0 00000000 ee98dbc0 00000000 ee98d600 ee98dbdc ee991680
-9f80: ee853ee0 c0134dec 00000000 c013a330 ee98d600 c013a234 00000000 00000000
+9f80: ee853ee0 c0134ea8 00000000 c013a3ec ee98d600 c013a2f0 00000000 00000000
 9fa0: 00000000 00000000 00000000 c0107938 00000000 00000000 00000000 00000000
 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 eeff7fff ffff6fef
-[<c03dbb4c>] (regulator_enable) from [<c03dbb5c>] (regulator_enable+0x28/0x120)
+9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 efff7fff ffff6fef
+[<c03dd7cc>] (regulator_enable) from [<c03dd7dc>] (regulator_enable+0x28/0x120)
 Code: e5905030 e3130001 13a04000 1a000015 (e595021c) 
----[ end trace 455174bfae007249 ]---
+---[ end trace 21a7ee500acf6b34 ]---
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.835801397 -0800
+++ /tmp/foob	2017-01-11 20:29:14.835801397 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -41,21 +41,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################################
-	 3.6 MiB/s
+	 #####################################################
+	 3.5 MiB/s
 done
-Bytes transferred = 7441752 (718d58 hex)
+Bytes transferred = 7446616 (71a058 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x718d58 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x71a058 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -63,7 +63,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 10 19:35:03 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -75,20 +75,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c142c880, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1432080, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327679 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef85000 s34240 r8192 d23104 u65536
-pcpu-alloc: s34240 r8192 d23104 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef85000 s34304 r8192 d23040 u65536
+pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522751
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1995808K/2097148K available (9216K kernel code, 1208K rwdata, 4164K rodata, 2048K init, 467K bss, 35804K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1995788K/2097148K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35824K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,8 +98,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142e380   (1209 kB)
-       .bss : 0xc1430000 - 0xc14a4c28   ( 468 kB)
+      .data : 0xc1300000 - 0xc1433b80   (1231 kB)
+       .bss : 0xc1435000 - 0xc14a9d28   ( 468 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -296,7 +296,9 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
@@ -320,32 +322,30 @@
 +5V_HDMI_CON: supplied by +5V_SYS
 usb3-0 supply vbus not found, using dummy regulator
 usb3-1 supply vbus not found, using dummy regulator
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 tegra-hdmi 54280000.hdmi: failed to get VDD regulator
 tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
 panel supply power not found, using dummy regulator
 ------------[ cut here ]------------
-WARNING: CPU: 2 PID: 97 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
+WARNING: CPU: 0 PID: 98 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 2 PID: 97 Comm: kworker/2:2 Not tainted 4.10.0-rc3-next-20170111-144933-g4301f6c #1
+CPU: 0 PID: 98 Comm: kworker/0:2 Not tainted 4.10.0-rc3-next-20170112-145329-geec0d3d #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c059af30>] (dump_stack+0x84/0xa4)
-[<c059af30>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
-[<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
-[<c0341bd8>] (warn_slowpath_null) from [<c07dfba0>] (driver_probe_device+0x288/0x2c0)
-[<c07dfba0>] (driver_probe_device) from [<c07de094>] (bus_for_each_drv+0x44/0x8c)
-[<c07de094>] (bus_for_each_drv) from [<c07df890>] (__device_attach+0x9c/0x100)
-[<c07df890>] (__device_attach) from [<c07def2c>] (bus_probe_device+0x84/0x8c)
-[<c07def2c>] (bus_probe_device) from [<c07df360>] (deferred_probe_work_func+0x60/0x8c)
-[<c07df360>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
-[<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
-[<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
-[<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
-[<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace 6d3d81f3d3b27f69 ]---
+[<c030b158>] (show_stack) from [<c059c314>] (dump_stack+0x84/0xa4)
+[<c059c314>] (dump_stack) from [<c0341b94>] (__warn+0xd4/0x100)
+[<c0341b94>] (__warn) from [<c0341be0>] (warn_slowpath_null+0x20/0x28)
+[<c0341be0>] (warn_slowpath_null) from [<c07e1048>] (driver_probe_device+0x288/0x2c0)
+[<c07e1048>] (driver_probe_device) from [<c07df53c>] (bus_for_each_drv+0x44/0x8c)
+[<c07df53c>] (bus_for_each_drv) from [<c07e0d38>] (__device_attach+0x9c/0x100)
+[<c07e0d38>] (__device_attach) from [<c07e03d4>] (bus_probe_device+0x84/0x8c)
+[<c07e03d4>] (bus_probe_device) from [<c07e0808>] (deferred_probe_work_func+0x60/0x8c)
+[<c07e0808>] (deferred_probe_work_func) from [<c0357084>] (process_one_work+0x134/0x33c)
+[<c0357084>] (process_one_work) from [<c03572b4>] (process_scheduled_works+0x28/0x38)
+[<c03572b4>] (process_scheduled_works) from [<c03574dc>] (worker_thread+0x218/0x4f0)
+[<c03574dc>] (worker_thread) from [<c035c854>] (kthread+0xfc/0x134)
+[<c035c854>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
+---[ end trace 2b6286bc66195049 ]---
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
@@ -356,7 +356,6 @@
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
 +3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
-elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
@@ -374,7 +373,6 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
-elan_i2c 1-0015: invalid report id data (ff)
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -391,7 +389,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.843801427 -0800
+++ /tmp/foob	2017-01-11 20:29:14.847801442 -0800
@@ -39,10 +39,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################################
-	 3.6 MiB/s
+	 ####################################################
+	 3.5 MiB/s
 done
-Bytes transferred = 5519152 (543730 hex)
+Bytes transferred = 5523568 (544870 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -53,7 +53,7 @@
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x543730 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x544870 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -62,7 +62,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 10 19:34:38 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -73,20 +73,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0d5f440, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5ea40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327679 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef84000 s34432 r8192 d22912 u65536
-pcpu-alloc: s34432 r8192 d22912 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef84000 s34496 r8192 d22848 u65536
+pcpu-alloc: s34496 r8192 d22848 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522751
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2000824K/2097148K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 364K bss, 30788K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 2000824K/2097148K available (8192K kernel code, 384K rwdata, 2480K rodata, 1024K init, 364K bss, 30788K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -96,8 +96,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60b00   ( 387 kB)
-       .bss : 0xc0d62000 - 0xc0dbd240   ( 365 kB)
+      .data : 0xc0d00000 - 0xc0d60100   ( 385 kB)
+       .bss : 0xc0d62000 - 0xc0dbd340   ( 365 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -300,9 +300,9 @@
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 17
 NET: Registered protocol family 15
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
@@ -364,8 +364,8 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.851801457 -0800
+++ /tmp/foob	2017-01-11 20:29:14.855801472 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1800594 us
+Bootloader-Cpu Init at (time stamp): 1800564 us
 
 Pinmux changes applied in kernel way
 
@@ -62,20 +62,20 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1800568  us
-Bootloader (AosInit) time: 733489 us
-Bootloader Main Init time: 180174 us
-BlockDevMgrInit time: 157544 us
+Miscellaneous avp time: 1800538  us
+Bootloader (AosInit) time: 733483 us
+Bootloader Main Init time: 180229 us
+BlockDevMgrInit time: 157546 us
 PartMgrInit time: 8 us
-StorMgrInit time: 30 us
+StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77085 us 
-Display init time: 574480 us
+Partition Table load: 77111 us 
+Display init time: 574409 us
 Kernel read time: 378 msec
 Load Kernel Size:   16304128 Bytes
 Bl Kernel ReadSpeed: 43132000 Bytes/sec
-Pre-Kernel Jump time: 1740380 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5844457 us
+Pre-Kernel Jump time: 1740455 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5842351 us
 Booting Linux on physical CPU 0x0
 Linux version 4.8.0-239303-g3477d16 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Oct 7 01:12:37 PDT 2016
 Boot CPU: AArch64 Processor [4e0f0000]
@@ -184,7 +184,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(1.131:1): initialized
+audit: type=2000 audit(1.179:1): initialized
 workingset: timestamp_bits=46 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -251,10 +251,9 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 +VDD_LED: supplied by +VDD_MUX
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
@@ -273,6 +272,9 @@
 Freeing unused kernel memory: 960K (ffff800000c00000 - ffff800000cf0000)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.859801487 -0800
+++ /tmp/foob	2017-01-11 20:29:14.863801502 -0800
@@ -1,363 +1 @@
-
-U-Boot SPL 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39)
-
-
-U-Boot 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39)
-
-TEGRA20
-Model: Compulab TrimSlice board
-DRAM:  1 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-SF: Detected W25Q80BL with page size 256 Bytes, erase size 4 KiB, total 1 MiB
-tegra-pcie: PCI regions:
-tegra-pcie:   I/O: 0x82000000-0x82010000
-tegra-pcie:   non-prefetchable memory: 0xa0000000-0xa8000000
-tegra-pcie:   prefetchable memory: 0xa8000000-0xc0000000
-tegra-pcie: dual-mode configuration
-tegra-pcie: probing port 0, using 2 lanes
-In:    serial
-Out:   serial
-Err:   serial
-Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
-Tegra20 (TrimSlice) # 
-Tegra20 (TrimSlice) # usb reset
-resetting USB...
-USB0:   USB EHCI 1.00
-scanning bus 0 for devices... 3 USB Device(s) found
-USB1:   USB EHCI 1.00
-scanning bus 1 for devices... 1 USB Device(s) found
-USB2:   lowlevel init failed
-       scanning usb for storage devices... 0 Storage Device(s) found
-       scanning usb for ethernet devices... 
-Warning: asx0 using MAC address from net device
-1 Ethernet Device(s) found
-Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
-Tegra20 (TrimSlice) # setenv ipaddr 192.168.100.103; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
-Tegra20 (TrimSlice) # tftpboot 0x00408000 zImage.multi_v7_defconfig
-Using RTL8169#0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.103
-Filename 'zImage.multi_v7_defconfig'.
-Load address: 0x408000
-Loading: *#################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 ####################################################
-	 4.1 MiB/s
-done
-Bytes transferred = 7441752 (718d58 hex)
-Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
-Using RTL8169#0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.103
-Filename 'tegra20-trimslice.dtb'.
-Load address: 0x2408000
-Loading: *##
-	 2.9 MiB/s
-done
-Bytes transferred = 21404 (539c hex)
-Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x718d58 ]
-## Flattened Device Tree blob at 02408000
-   Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 0241039b
-
-Starting kernel ...
-
-Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 10 19:35:03 PST 2017
-CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
-CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
-OF: fdt:Machine model: Compulab TrimSlice board
-debug: ignoring loglevel setting.
-efi: Getting EFI parameters from FDT:
-efi: UEFI not found.
-cma: Reserved 64 MiB at 0x3c000000
-Memory policy: Data cache writealloc
-On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c142c880, node_mem_map ef7f8000
-  DMA zone: 1536 pages used for memmap
-  DMA zone: 0 pages reserved
-  DMA zone: 196608 pages, LIFO batch:31
-  HighMem zone: 65536 pages, LIFO batch:15
-percpu: Embedded 16 pages/cpu @ef7c6000 s34240 r8192 d23104 u65536
-pcpu-alloc: s34240 r8192 d23104 u65536 alloc=16*4096
-pcpu-alloc: [0] 0 [0] 1 
-Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
-Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
-PID hash table entries: 4096 (order: 2, 16384 bytes)
-Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
-Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 955732K/1048576K available (9216K kernel code, 1208K rwdata, 4164K rodata, 2048K init, 467K bss, 27308K reserved, 65536K cma-reserved, 196608K highmem)
-Virtual kernel memory layout:
-    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
-    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
-    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
-    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
-    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0c00000   (10208 kB)
-      .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142e380   (1209 kB)
-       .bss : 0xc1430000 - 0xc14a4c28   ( 468 kB)
-SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
-Hierarchical RCU implementation.
-	RCU debugfs-based tracing is enabled.
-	Build-time adjustment of leaf fanout to 32.
-	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
-RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
-NR_IRQS:16 nr_irqs:16 16
-/interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
-L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
-L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
-L2C-310 errata 727915 769419 enabled
-L2C-310 enabling early BRESP for Cortex-A9
-L2C-310: enabling full line of zeros but not enabled in Cortex-A9
-L2C-310 ID prefetch enabled, offset 1 lines
-L2C-310 cache controller enabled, 8 ways, 1024 kB
-L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
-Switching to timer-based delay loop, resolution 1000ns
-Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
-pid_max: default: 32768 minimum: 301
-Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-CPU: Testing write buffer coherency: ok
-CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x300000 - 0x300098
-Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2
-EFI services will not be available.
-smp: Bringing up secondary CPUs ...
-CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-smp: Brought up 1 node, 2 CPUs
-SMP: Total of 2 processors activated (4.00 BogoMIPS).
-CPU: All CPU(s) started in SVC mode.
-devtmpfs: initialized
-VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
-clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
-pinctrl core: initialized pinctrl subsystem
-NET: Registered protocol family 16
-DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor menu
-No ATAGs?
-hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
-hw-breakpoint: maximum watchpoint size is 4 bytes.
-Serial: AMBA PL011 UART driver
-usb1_vbus: Failed to request enable GPIO170: -517
-reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517
-vgaarb: loaded
-SCSI subsystem initialized
-libata version 3.00 loaded.
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
-pps_core: LinuxPPS API ver. 1 registered
-pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
-PTP clock support registered
-EDAC MC: Ver: 3.0.0
-clocksource: Switched to clocksource timer_us
-NET: Registered protocol family 2
-TCP established hash table entries: 8192 (order: 3, 32768 bytes)
-TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
-TCP: Hash tables configured (established 8192 bind 8192)
-UDP hash table entries: 512 (order: 2, 16384 bytes)
-UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
-NET: Registered protocol family 1
-RPC: Registered named UNIX socket transport module.
-RPC: Registered udp transport module.
-RPC: Registered tcp transport module.
-RPC: Registered tcp NFSv4.1 backchannel transport module.
-PCI: CLS 0 bytes, default 64
-hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
-futex hash table entries: 512 (order: 3, 32768 bytes)
-workingset: timestamp_bits=30 max_order=18 bucket_order=0
-squashfs: version 4.0 (2009/01/31) Phillip Lougher
-NFS: Registering the id_resolver key type
-Key type id_resolver registered
-Key type id_legacy registered
-ntfs: driver 2.1.32 [Flags: R/O].
-bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
-io scheduler noop registered
-io scheduler deadline registered
-io scheduler cfq registered (default)
-tegra-pcie 80003000.pcie-controller: dual-mode configuration
-tegra-pcie 80003000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
-pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff]
-pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref]
-pci_bus 0000:00: root bus resource [bus 00-ff]
-pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
-pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x6 may corrupt adjacent RW1C bits
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
-pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x52 may corrupt adjacent RW1C bits
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-Disabling cpuidle LP2 state, since PCIe IRQs are in use
-pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
-pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref]
-pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref]
-pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:01.0: PCI bridge to [bus 01]
-pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xa00fffff]
-pci 0000:00:01.0:   bridge window [mem 0xa8000000-0xa80fffff 64bit pref]
-pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:01.0: enabling device (0140 -> 0143)
-pcieport 0000:00:01.0: Signaling PME with IRQ 295
-tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
-Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-console [ttyS0] disabled
-70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
-console [ttyS0] enabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
-STMicroelectronics ASC driver initialized
-54280000.hdmi supply hdmi not found, using dummy regulator
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes - going 1024x768
-Console: switching to colour frame buffer device 128x48
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-brd: module loaded
-loop: module loaded
-m25p80 spi32766.0: found s25fl008k, expected w25q80bl
-m25p80 spi32766.0: s25fl008k (1024 Kbytes)
-libphy: Fixed MDIO Bus: probed
-CAN device driver interface
-bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
-e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
-e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
-igb: Copyright (c) 2007-2014 Intel Corporation.
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf08fc000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
-usbcore: registered new interface driver pegasus
-usbcore: registered new interface driver asix
-usbcore: registered new interface driver ax88179_178a
-usbcore: registered new interface driver cdc_ether
-usbcore: registered new interface driver smsc75xx
-usbcore: registered new interface driver smsc95xx
-usbcore: registered new interface driver net1080
-usbcore: registered new interface driver cdc_subset
-usbcore: registered new interface driver zaurus
-usbcore: registered new interface driver cdc_ncm
-tegra-phy c5004000.usb-phy: no vbus regulator
-tegra-phy c5008000.usb-phy: no vbus regulator
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-ehci-platform: EHCI generic platform driver
-ehci-orion: EHCI orion driver
-SPEAr-ehci: EHCI SPEAr driver
-ehci-st: EHCI STMicroelectronics driver
-ehci-exynos: EHCI EXYNOS driver
-ehci-atmel: EHCI Atmel driver
-tegra-ehci: Tegra EHCI driver
-ulpi_phy_power_on: ulpi write failed
-tegra-ehci c5004000.usb: Failed to power on the phy
-tegra-ehci: probe of c5004000.usb failed with error -110
-tegra-ehci c5008000.usb: EHCI Host Controller
-tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
-tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-ohci-pci: OHCI PCI platform driver
-ohci-platform: OHCI generic platform driver
-ohci-omap3: OHCI OMAP3 driver
-SPEAr-ohci: OHCI SPEAr driver
-ohci-st: OHCI STMicroelectronics driver
-ohci-atmel: OHCI Atmel driver
-usbcore: registered new interface driver usb-storage
-mousedev: PS/2 mouse device common for all mice
-rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
-tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
-i2c /dev entries driver
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-Synopsys Designware Multimedia Card Interface Driver
-sdhci-pltfm: SDHCI platform and OF driver helper
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
-sdhci-tegra c8000600.sdhci: Got CD GPIO
-sdhci-tegra c8000600.sdhci: Got WP GPIO
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
-ledtrig-cpu: registered to indicate activity on CPUs
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-NET: Registered protocol family 10
-Segment Routing with IPv6
-sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
-NET: Registered protocol family 17
-can: controller area network core (rev 20120528 abi 9)
-NET: Registered protocol family 29
-can: raw protocol (rev 20120528)
-can: broadcast manager protocol (rev 20161123 t)
-can: netlink gateway (rev 20130117) max_hops=1
-Key type dns_resolver registered
-ThumbEE CPU extension supported.
-Registering SWP/SWPB emulation handler
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci c5000000.usb: EHCI Host Controller
-tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-rtc-em3027 2-0056: setting system clock to 2015-02-06 03:39:34 UTC (1423193974)
- mmcblk1: p1 p2
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-random: fast init done
-asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 2048K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+ææææþÀæøàæææÀæøæøøøÆÀøàæøÀ8øàæàþøææÆæææ>þàøàæææàæøæøøøæàøàæøàøàæÀþøææàææàæøææþÀæøàæææþàÀæææææøÀæøøÆàææÀàæææþøàææøæÀþææþæææøæàþææþàææààæþææàþæøææàþàææøæøææøøæÆþæÆøøææøæøøææøæþþÀæÀææàÆøþøÆæÆàææþææøæøþæþøþæàæøþøæææÀææþæþøøÀæàæøþøæææàæ>æþþøæøæøøæøÀæààææøæþæþæÆæàæøþøæææÀææþøæøøæøÀæààææøæþæþæÆàæàæøþøæææÀææþøææææþÀæøÀæøøæþæþæþþøæÀæøþøæÆæÀÆæþøææ>øþæþææøæøþøææøæøøæøææþÆþøæøæææøøþøæøææøæþøÆæàÀàæÀææøþþøþþæþàææþÀþøøàøæÆþÀæàþþæøþÀæþøÀæææææøàæþøæøøàøæþÆøææÀæøøþæàþøøæøææÀææÆþÀøæÀøæþæþàææþÀæÀøæøæøÀæþææøøæøøæøæø8øàææææàæøæþàæøþøæàøæþþàæþøþøþÀæþàæàøææøøæÆàÆþàøæÆþþøþàøæøææþæøøæææææþàææææææàÆÀæÀàæøàæøææøþøø8ææþàæÀþþæøþàæþøàÆæææøÀæþøæøøÀøæþæøææàæøøþæþøøæøææÀæøþþÆÆàþøàÆæøÆæøþææøøøæææøæþæøàøàææøææøþææþæøææþøþøþææøøæææþøæææàææÀæøøþàæþøþøæþÆø>øøøææþææøæþøæàþþææÀæÆæÀÆþæøæøþ>æÀææææþøæææàææÀæøøþàæþàøþøæþÆøøøøææàæþæøæøþæÀæÆÆøþþÆþæàøæÀæøæøæàæøøþææøàøþøþþææøæøæþæøøø8þþææøæàæþæøæøþæàæøæàæøøþææøàøþþæøæþøæþæøøøþæøæþÀæþæøæøþæàÆæÆæøæþæøþæøþþøæþæøææþàææàøæøææøþàææþÀææÀøÆøææøþøææþÀææÀøÆøææøþøÆæþàÆæàøæøææøþææþàææàøæøææøþææ
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.871801533 -0800
+++ /tmp/foob	2017-01-11 20:29:14.871801533 -0800
@@ -44,21 +44,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################################
-	 4.1 MiB/s
+	 ####################################################
+	 4 MiB/s
 done
-Bytes transferred = 5519152 (543730 hex)
+Bytes transferred = 5523568 (544870 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x543730 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x544870 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -67,7 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 10 19:34:38 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -76,20 +76,20 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0d5f440, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0d5ea40, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 65536 pages, LIFO batch:15
-percpu: Embedded 16 pages/cpu @ef7c5000 s34432 r8192 d22912 u65536
-pcpu-alloc: s34432 r8192 d22912 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @ef7c5000 s34496 r8192 d22848 u65536
+pcpu-alloc: s34496 r8192 d22848 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 960748K/1048576K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 364K bss, 22292K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 960748K/1048576K available (8192K kernel code, 384K rwdata, 2480K rodata, 1024K init, 364K bss, 22292K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,8 +99,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60b00   ( 387 kB)
-       .bss : 0xc0d62000 - 0xc0dbd240   ( 365 kB)
+      .data : 0xc0d00000 - 0xc0d60100   ( 385 kB)
+       .bss : 0xc0d62000 - 0xc0dbd340   ( 365 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -349,7 +349,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 03:38:03 UTC (1423193883)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 03:44:11 UTC (1423194251)
 ALSA device list:
   #0: tegra-trimslice
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.891801608 -0800
+++ /tmp/foob	2017-01-11 20:29:14.895801624 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 848798 us
-Basic modules init took 349210 us
+Tegraboot started after 783111 us
+Basic modules init took 349007 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14366 us
-Carveout took 253192 us
-CPU initialization took 92329 us
-Total time taken by TegraBoot 709097 us
+Next stage binary read took 14337 us
+Carveout took 252724 us
+CPU initialization took 92313 us
+Total time taken by TegraBoot 708381 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.686] LPDDR4 Training: Number of tables = 10
+64b[0001.621] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-15067648 bytes read in 798 ms (18 MiB/s)
+15067648 bytes read in 799 ms (18 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44882 bytes read in 473 ms (91.8 KiB/s)
+44882 bytes read in 453 ms (96.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 496 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-169366-g4301f6c (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jan 10 19:38:27 PST 2017
+Linux version 4.10.0-rc3-next-20170112-169762-geec0d3d (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Jan 11 20:24:09 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -149,8 +149,8 @@
 psci: PSCIv0.2 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
-percpu: Embedded 23 pages/cpu @ffff8000bff4f000 s56448 r8192 d29568 u94208
-pcpu-alloc: s56448 r8192 d29568 u94208 alloc=23*4096
+percpu: Embedded 23 pages/cpu @ffff8000bff4f000 s56576 r8192 d29440 u94208
+pcpu-alloc: s56576 r8192 d29440 u94208 alloc=23*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -169,7 +169,7 @@
     .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
       .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
       .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f630   (   388 KB)
+       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -254,7 +254,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 808bd000
+kvm [1]: IDMAP page: 808bf000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -342,6 +342,6 @@
 devtmpfs: mounted
 Freeing unused kernel memory: 1088K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job contr[    1.335298] random: fast init done
+bash: no job contr[    1.312746] random: fast init done
 ol in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.907801668 -0800
+++ /tmp/foob	2017-01-11 20:29:14.911801684 -0800
@@ -1,12 +1,5 @@
-000000] efi: UEFI not found.
-cma: Reserved 16 MiB at 0x00000000f5400000
-earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
-bootconsole [uart0] enabled
-psci: probing for conduit method from DT.
-psci: PSCIv1.0 detected in firmware.
-psci: Using standard PSCI v0.2 function IDs
-psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
-percpu: Embedded 23 pages/cpu @ffff8000bff43000 s56448 r8192 d29568 u94208
+)
+percpu: Embedded 23 pages/cpu @ffff8000bff43000 s56576 r8192 d29440 u94208
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -24,7 +17,7 @@
     .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
       .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
       .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f630   (   388 KB)
+       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -53,7 +46,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x92d0: expected 0x2004f400
+boot misc3 0x98e0: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -66,7 +59,7 @@
 console [tty0] enabled
 bootconsole [uart0] disabled
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-169366-g4301f6c (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jan 10 19:38:27 PST 2017
+Linux version 4.10.0-rc3-next-20170112-169762-geec0d3d (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Wed Jan 11 20:24:09 PST 2017
 Boot CPU: AArch64 Processor [411fd071]
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -77,7 +70,7 @@
 psci: PSCIv1.0 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
-percpu: Embedded 23 pages/cpu @ffff8000bff43000 s56448 r8192 d29568 u94208
+percpu: Embedded 23 pages/cpu @ffff8000bff43000 s56576 r8192 d29440 u94208
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -95,7 +88,7 @@
     .rodata : 0xffff0000088d0000 - 0xffff000008ce0000   (  4160 KB)
       .init : 0xffff000008ce0000 - 0xffff000008df0000   (  1088 KB)
       .data : 0xffff000008df0000 - 0xffff000008edea00   (   955 KB)
-       .bss : 0xffff000008edea00 - 0xffff000008f3f630   (   388 KB)
+       .bss : 0xffff000008edea00 - 0xffff000008f3f7b0   (   388 KB)
     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
@@ -124,7 +117,7 @@
  (comparison mask = 0xf8000000)
 boot misc2 0x0: expected 0xf400f0da
  (comparison mask = 0xffffffff)
-boot misc3 0x92d0: expected 0x2004f400
+boot misc3 0x98e0: expected 0x2004f400
  (comparison mask = 0xffffffff)
 PLL_P already enabled. Postponing set full defaults
 PLL_X already enabled. Postponing set full defaults
@@ -204,7 +197,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 2364K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 808bd000
+kvm [1]: IDMAP page: 808bf000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: Hyp mode initialized successfully
 kvm [1]: vgic-v2@50044000
@@ -212,7 +205,7 @@
 kvm [1]: virtual timer IRQ4
 futex hash table entries: 1024 (order: 5, 131072 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.327:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.335:1): state=initialized audit_enabled=0 res=1
 workingset: timestamp_bits=46 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -302,9 +295,9 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
-max77686-rtc max77620-rtc: setting system clock to 2000-10-22 09:06:34 UTC (972205594)
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
+max77686-rtc max77620-rtc: setting system clock to 2000-10-23 09:52:17 UTC (972294737)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_AVDD: disabling
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.915801698 -0800
+++ /tmp/foob	2017-01-11 20:29:14.919801713 -0800
@@ -38,21 +38,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################################
-	 3.3 MiB/s
+	 #####################################################
+	 3.2 MiB/s
 done
-Bytes transferred = 7441752 (718d58 hex)
+Bytes transferred = 7446616 (71a058 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x718d58 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x71a058 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 10 19:35:03 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 11 20:20:17 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -70,20 +70,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c142c880, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c1432080, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef8c000 s34240 r8192 d23104 u65536
-pcpu-alloc: s34240 r8192 d23104 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef8c000 s34304 r8192 d23040 u65536
+pcpu-alloc: s34304 r8192 d23040 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994832K/2096128K available (9216K kernel code, 1208K rwdata, 4164K rodata, 2048K init, 467K bss, 35760K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994812K/2096128K available (9216K kernel code, 1230K rwdata, 4168K rodata, 2048K init, 467K bss, 35780K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142e380   (1209 kB)
-       .bss : 0xc1430000 - 0xc14a4c28   ( 468 kB)
+      .data : 0xc1300000 - 0xc1433b80   (1231 kB)
+       .bss : 0xc1435000 - 0xc14a9d28   ( 468 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -306,8 +306,7 @@
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
@@ -315,9 +314,10 @@
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
- mmcblk0: p1 p2 p3
-tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
+ mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -390,10 +390,10 @@
 EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT4-fs (mmcblk1p1): recovery complete
 EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
+VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.133949] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.083576] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-11 20:29:14.923801729 -0800
+++ /tmp/foob	2017-01-11 20:29:14.927801744 -0800
@@ -36,21 +36,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################################
-	 3.4 MiB/s
+	 ####################################################
+	 3.2 MiB/s
 done
-Bytes transferred = 5519152 (543730 hex)
+Bytes transferred = 5523568 (544870 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x543730 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x544870 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc3-next-20170111-144933-g4301f6c (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 10 19:34:38 PST 2017
+Linux version 4.10.0-rc3-next-20170112-145329-geec0d3d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 11 20:20:02 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -68,20 +68,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f440, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5ea40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 16 pages/cpu @eef8b000 s34432 r8192 d22912 u65536
-pcpu-alloc: s34432 r8192 d22912 u65536 alloc=16*4096
+percpu: Embedded 16 pages/cpu @eef8b000 s34496 r8192 d22848 u65536
+pcpu-alloc: s34496 r8192 d22848 u65536 alloc=16*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999848K/2096128K available (8192K kernel code, 386K rwdata, 2480K rodata, 1024K init, 364K bss, 30744K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1999848K/2096128K available (8192K kernel code, 384K rwdata, 2480K rodata, 1024K init, 364K bss, 30744K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,8 +91,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60b00   ( 387 kB)
-       .bss : 0xc0d62000 - 0xc0dbd240   ( 365 kB)
+      .data : 0xc0d00000 - 0xc0d60100   ( 385 kB)
+       .bss : 0xc0d62000 - 0xc0dbd340   ( 365 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -390,4 +390,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.370540] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.340525] usb 2-1: new high-speed USB device number 2 using tegra-ehci
