Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.612587234 -0800
+++ /tmp/foob	2017-01-04 20:43:09.616587248 -0800
@@ -39,20 +39,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.2 MiB/s
+	 3 MiB/s
 done
-Bytes transferred = 7409888 (7110e0 hex)
+Bytes transferred = 7411608 (711798 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7110e0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x711798 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 4 20:34:45 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994948K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35644K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994948K/2096128K available (9216K kernel code, 1203K rwdata, 4148K rodata, 2048K init, 471K bss, 35644K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -307,19 +307,19 @@
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
 mmc0: new high speed SDHC card at address aaaa
-VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+ mmcblk0: p1 p2 p3
 [drm] No driver support for vblank timestamp query.
 [drm] Cannot find any crtc or sizes - going 1024x768
- mmcblk0: p1 p2 p3
-Console: switching to colour frame buffer device 128x48
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+Console: switching to colour frame buffer device 128x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -329,7 +329,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-28 15:22:38 UTC (972746558)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-29 16:07:15 UTC (972835635)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -341,4 +341,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.439403] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.429478] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.628587292 -0800
+++ /tmp/foob	2017-01-04 20:43:09.632587307 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -36,21 +36,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################################
-	 3.4 MiB/s
+	 ###################################################
+	 3.3 MiB/s
 done
-Bytes transferred = 5504592 (53fe50 hex)
+Bytes transferred = 5505056 (540020 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x53fe50 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x540020 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 4 20:34:17 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -69,7 +69,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f380, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -92,7 +92,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60980   ( 387 kB)
+      .data : 0xc0d00000 - 0xc0d60a40   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe308   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -321,7 +321,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-28 15:19:56 UTC (972746396)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-29 16:04:30 UTC (972835470)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -335,4 +335,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.709684] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.709891] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.648587366 -0800
+++ /tmp/foob	2017-01-04 20:43:09.652587381 -0800
@@ -34,20 +34,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 4 MiB/s
+	 3.9 MiB/s
 done
-Bytes transferred = 7409888 (7110e0 hex)
+Bytes transferred = 7411608 (711798 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 1.5 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7110e0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x711798 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 4 20:34:45 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -79,7 +79,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994828K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35764K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994828K/2096128K available (9216K kernel code, 1203K rwdata, 4148K rodata, 2048K init, 471K bss, 35764K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -327,24 +327,24 @@
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 60 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 2 PID: 60 Comm: kworker/2:1 Not tainted 4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Not tainted 4.10.0-rc2-next-20170105-143855-ged93c11 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c0597170>] (dump_stack+0x84/0xa4)
-[<c0597170>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
+[<c030b158>] (show_stack) from [<c0597190>] (dump_stack+0x84/0xa4)
+[<c0597190>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
 [<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
-[<c0341bd8>] (warn_slowpath_null) from [<c07db348>] (driver_probe_device+0x288/0x2c0)
-[<c07db348>] (driver_probe_device) from [<c07d983c>] (bus_for_each_drv+0x44/0x8c)
-[<c07d983c>] (bus_for_each_drv) from [<c07db038>] (__device_attach+0x9c/0x100)
-[<c07db038>] (__device_attach) from [<c07da6d4>] (bus_probe_device+0x84/0x8c)
-[<c07da6d4>] (bus_probe_device) from [<c07dab08>] (deferred_probe_work_func+0x60/0x8c)
-[<c07dab08>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
+[<c0341bd8>] (warn_slowpath_null) from [<c07db4fc>] (driver_probe_device+0x288/0x2c0)
+[<c07db4fc>] (driver_probe_device) from [<c07d99f0>] (bus_for_each_drv+0x44/0x8c)
+[<c07d99f0>] (bus_for_each_drv) from [<c07db1ec>] (__device_attach+0x9c/0x100)
+[<c07db1ec>] (__device_attach) from [<c07da888>] (bus_probe_device+0x84/0x8c)
+[<c07da888>] (bus_probe_device) from [<c07dacbc>] (deferred_probe_work_func+0x60/0x8c)
+[<c07dacbc>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
 [<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
 [<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
 [<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
 [<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace e09f88ab1692dd95 ]---
+---[ end trace ae124d7f9f4ba7ff ]---
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
@@ -361,26 +361,26 @@
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 60 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
 Modules linked in:
-CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc2-next-20170105-143855-ged93c11 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c0597170>] (dump_stack+0x84/0xa4)
-[<c0597170>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
+[<c030b158>] (show_stack) from [<c0597190>] (dump_stack+0x84/0xa4)
+[<c0597190>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
 [<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
-[<c0341bd8>] (warn_slowpath_null) from [<c06e3c64>] (regulator_unregister+0xc0/0xcc)
-[<c06e3c64>] (regulator_unregister) from [<c07de200>] (release_nodes+0x164/0x1dc)
-[<c07de200>] (release_nodes) from [<c07db16c>] (driver_probe_device+0xac/0x2c0)
-[<c07db16c>] (driver_probe_device) from [<c07d983c>] (bus_for_each_drv+0x44/0x8c)
-[<c07d983c>] (bus_for_each_drv) from [<c07db038>] (__device_attach+0x9c/0x100)
-[<c07db038>] (__device_attach) from [<c07da6d4>] (bus_probe_device+0x84/0x8c)
-[<c07da6d4>] (bus_probe_device) from [<c07dab08>] (deferred_probe_work_func+0x60/0x8c)
-[<c07dab08>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
+[<c0341bd8>] (warn_slowpath_null) from [<c06e3d64>] (regulator_unregister+0xc0/0xcc)
+[<c06e3d64>] (regulator_unregister) from [<c07de3b4>] (release_nodes+0x164/0x1dc)
+[<c07de3b4>] (release_nodes) from [<c07db320>] (driver_probe_device+0xac/0x2c0)
+[<c07db320>] (driver_probe_device) from [<c07d99f0>] (bus_for_each_drv+0x44/0x8c)
+[<c07d99f0>] (bus_for_each_drv) from [<c07db1ec>] (__device_attach+0x9c/0x100)
+[<c07db1ec>] (__device_attach) from [<c07da888>] (bus_probe_device+0x84/0x8c)
+[<c07da888>] (bus_probe_device) from [<c07dacbc>] (deferred_probe_work_func+0x60/0x8c)
+[<c07dacbc>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
 [<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
 [<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
 [<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
 [<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace e09f88ab1692dd96 ]---
+---[ end trace ae124d7f9f4ba800 ]---
 tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -402,48 +402,48 @@
 [000dbd9c] *pgd=00000000
 Internal error: Oops: 5 [#1] SMP ARM
 Modules linked in:
-CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc2-next-20170105-143855-ged93c11 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 task: ee3e0a80 task.stack: ee45c000
 PC is at regulator_enable+0x18/0x120
 LR is at regulator_enable+0x28/0x120
-pc : [<c06e3e4c>]    lr : [<c06e3e5c>]    psr: 60000113
+pc : [<c06e3f4c>]    lr : [<c06e3f5c>]    psr: 60000113
 sp : ee45dcb8  ip : 00000000  fp : c1302d00
 r10: ee7e5858  r9 : 00000003  r8 : c0d38ac8
 r7 : 00000000  r6 : 00000000  r5 : 000dbba0  r4 : ee7e5810
-r3 : 00000080  r2 : 00000000  r1 : c06e3ea4  r0 : ee784c80
+r3 : 00000080  r2 : 00000000  r1 : c06e3fa4  r0 : ee770d00
 Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
 Control: 10c5387d  Table: 8020406a  DAC: 00000051
 Process kworker/2:1 (pid: 60, stack limit = 0xee45c220)
 Stack: (0xee45dcb8 to 0xee45e000)
 dca0:                                                       ee7e5810 ee7e4c00
-dcc0: 00000000 c06e3e5c ee7e5810 ee476400 00000000 c06e3e5c ee7e5810 00000000
-dce0: 00000000 c07c9b34 00000000 ee5a4010 ee7e5810 ee5739e8 00000000 ee573800
-dd00: ee5739d4 ee573800 ee785480 c074ed1c 00000000 00000000 00000000 00000001
-dd20: ee7e5c00 c07c2018 00000000 00000001 ffffffff 00000000 ee7e5c00 00000000
-dd40: 00000000 c1400280 00000000 00000000 ee78ecc0 c07712dc 00000000 ee7e5c00
-dd60: c1400280 ee573810 00000000 ee7e5c00 ee573800 00000000 00000000 c1400398
-dd80: 00000010 c07c1bb0 c07c1b80 ee573810 c1472e88 c074ea48 c074ea2c c07db2bc
-dda0: 00000000 00000000 ee45ddd8 c07db464 00000001 c1472e64 00000000 c07d983c
-ddc0: ee57b16c ee57e738 ee573810 ee573844 c13fecbc c07db038 ee573810 00000001
-dde0: 00000000 ee573810 ee573810 c13fecbc ee1a1e10 c07da6d4 ee573810 00000000
-de00: ee573818 c07d8b48 00000000 0000001c c07c9154 00000000 ee573800 ee7e5810
-de20: ee578b80 ee5739d4 ee5739b0 eefaf740 ee573810 c074ec14 eefc9974 ee573784
-de40: c13fed24 c13fec8c ee7e5810 ee573610 00000010 c074f53c ee7e5810 ee1e2410
-de60: 00000000 ee1e2400 00000000 c07cb7e4 00000000 ee1c8100 ee7e5810 00000000
-de80: fffffffe ee1e2410 fffffdfb c14004fc c14004fc c07dca20 c07dc9d0 ee1e2410
-dea0: c1472e88 00000000 00000000 c07db2bc 00000000 00000000 ee45dee8 c07db464
-dec0: 00000001 00000000 00000000 c07d983c ee04276c ee57e838 ee1e2410 ee1e2444
-dee0: c1400a58 c07db038 ee1e2410 00000001 ee063f00 ee1e2410 ee1e2410 c1400a58
-df00: eefb2800 c07da6d4 ee1e2410 c14009d8 c14009f4 c07dab08 ee1a5080 c14009fc
-df20: eefaf740 c0356fc4 ee1a5080 c0be3510 ee1a5080 ee1a5098 00000001 eefaf740
+dcc0: 00000000 c06e3f5c ee7e5810 ee476400 00000000 c06e3f5c ee7e5810 00000000
+dce0: 00000000 c07c9ce8 00000000 ee5a4010 ee7e5810 ee5739e8 00000000 ee573800
+dd00: ee5739d4 ee573800 ee771480 c074ee1c 00000000 00000000 00000000 00000001
+dd20: ee7e5c00 c07c21cc 00000000 00000001 ffffffff 00000000 ee7e5c00 00000000
+dd40: 00000000 c14002c0 00000000 00000000 ee77ad40 c0771490 00000000 ee7e5c00
+dd60: c14002c0 ee573810 00000000 ee7e5c00 ee573800 00000000 00000000 c14003d8
+dd80: 00000010 c07c1d64 c07c1d34 ee573810 c1472e88 c074eb48 c074eb2c c07db470
+dda0: 00000000 00000000 ee45ddd8 c07db618 00000001 c1472e64 00000000 c07d99f0
+ddc0: ee57b16c ee57e738 ee573810 ee573844 c13fecfc c07db1ec ee573810 00000001
+dde0: 00000000 ee573810 ee573810 c13fecfc ee1a1e10 c07da888 ee573810 00000000
+de00: ee573818 c07d8cfc 00000000 0000001c c07c9308 00000000 ee573800 ee7e5810
+de20: ee578b80 ee5739d4 ee5739b0 eefaf740 ee573810 c074ed14 eefc9974 ee573784
+de40: c13fed64 c13feccc ee7e5810 ee573610 00000010 c074f63c ee7e5810 ee1e2410
+de60: 00000000 ee1e2400 00000000 c07cb998 00000000 ee1c8100 ee7e5810 00000000
+de80: fffffffe ee1e2410 fffffdfb c140053c c140053c c07dcbd4 c07dcb84 ee1e2410
+dea0: c1472e88 00000000 00000000 c07db470 00000000 00000000 ee45dee8 c07db618
+dec0: 00000001 00000000 00000000 c07d99f0 ee04276c ee57e838 ee1e2410 ee1e2444
+dee0: c1400a98 c07db1ec ee1e2410 00000001 ee063f00 ee1e2410 ee1e2410 c1400a98
+df00: eefb2800 c07da888 ee1e2410 c1400a18 c1400a34 c07dacbc ee1a5080 c1400a3c
+df20: eefaf740 c0356fc4 ee1a5080 c0be3658 ee1a5080 ee1a5098 00000001 eefaf740
 df40: ee1a5098 eefaf740 00000008 c03571f4 eefb28f5 ee1a5080 eefaf758 c035741c
 df60: ee0b3ee0 ee0d2640 00000000 ee0d2640 00000000 ee1a41c0 ee0d265c ee1a5080
 df80: ee0b3ee0 c0357204 00000000 c035c794 ee1a41c0 c035c698 00000000 00000000
 dfa0: 00000000 00000000 00000000 c0307f78 00000000 00000000 00000000 00000000
 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
-[<c06e3e4c>] (regulator_enable) from [<c06e3e5c>] (regulator_enable+0x28/0x120)
+[<c06e3f4c>] (regulator_enable) from [<c06e3f5c>] (regulator_enable+0x28/0x120)
 Code: e5905030 e3130001 13a04000 1a000015 (e59501fc) 
----[ end trace e09f88ab1692dd97 ]---
+---[ end trace ae124d7f9f4ba801 ]---
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.668587440 -0800
+++ /tmp/foob	2017-01-04 20:43:09.672587454 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -31,21 +31,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################################
-	 4 MiB/s
+	 ###################################################
+	 3.9 MiB/s
 done
-Bytes transferred = 5504592 (53fe50 hex)
+Bytes transferred = 5505056 (540020 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x53fe50 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x540020 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -54,7 +54,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 4 20:34:17 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -64,7 +64,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f380, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -87,7 +87,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60980   ( 387 kB)
+      .data : 0xc0d00000 - 0xc0d60a40   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe308   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -321,45 +321,43 @@
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
-gpio gpiochip1: (as3722-gpio): could not create pin range
-as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 as3722-sd5: supplied by +5V_SYS
 as3722-ldo0: supplied by +1.35V_LP0(sd2)
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo2: supplied by +1.8V_VDDIO
 as3722-ldo3: supplied by +3.3V_SYS
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
 +VDDIO_SDMMC3: bypassed regulator has no supply!
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
 ------------[ cut here ]------------
-WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
+WARNING: CPU: 2 PID: 73 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
 Modules linked in:
-CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
+CPU: 2 PID: 73 Comm: kworker/2:1 Not tainted 4.10.0-rc2-next-20170105-143855-ged93c11 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c010f308>] (unwind_backtrace) from [<c010a900>] (show_stack+0x10/0x14)
-[<c010a900>] (show_stack) from [<c034e03c>] (dump_stack+0x84/0xa4)
-[<c034e03c>] (dump_stack) from [<c011fb34>] (__warn+0xd4/0x100)
+[<c010a900>] (show_stack) from [<c034e05c>] (dump_stack+0x84/0xa4)
+[<c034e05c>] (dump_stack) from [<c011fb34>] (__warn+0xd4/0x100)
 [<c011fb34>] (__warn) from [<c011fb80>] (warn_slowpath_null+0x20/0x28)
-[<c011fb80>] (warn_slowpath_null) from [<c03db5bc>] (regulator_unregister+0xc0/0xcc)
-[<c03db5bc>] (regulator_unregister) from [<c046a5ac>] (release_nodes+0x164/0x1dc)
-[<c046a5ac>] (release_nodes) from [<c0467544>] (driver_probe_device+0xac/0x2c0)
-[<c0467544>] (driver_probe_device) from [<c0465c24>] (bus_for_each_drv+0x44/0x8c)
-[<c0465c24>] (bus_for_each_drv) from [<c0467410>] (__device_attach+0x9c/0x100)
-[<c0467410>] (__device_attach) from [<c0466aac>] (bus_probe_device+0x84/0x8c)
-[<c0466aac>] (bus_probe_device) from [<c0466ee0>] (deferred_probe_work_func+0x60/0x8c)
-[<c0466ee0>] (deferred_probe_work_func) from [<c0134bb4>] (process_one_work+0x120/0x320)
+[<c011fb80>] (warn_slowpath_null) from [<c03db6b0>] (regulator_unregister+0xc0/0xcc)
+[<c03db6b0>] (regulator_unregister) from [<c046a72c>] (release_nodes+0x164/0x1dc)
+[<c046a72c>] (release_nodes) from [<c04676c4>] (driver_probe_device+0xac/0x2c0)
+[<c04676c4>] (driver_probe_device) from [<c0465da4>] (bus_for_each_drv+0x44/0x8c)
+[<c0465da4>] (bus_for_each_drv) from [<c0467590>] (__device_attach+0x9c/0x100)
+[<c0467590>] (__device_attach) from [<c0466c2c>] (bus_probe_device+0x84/0x8c)
+[<c0466c2c>] (bus_probe_device) from [<c0467060>] (deferred_probe_work_func+0x60/0x8c)
+[<c0467060>] (deferred_probe_work_func) from [<c0134bb4>] (process_one_work+0x120/0x320)
 [<c0134bb4>] (process_one_work) from [<c0134ddc>] (process_scheduled_works+0x28/0x38)
 [<c0134ddc>] (process_scheduled_works) from [<c0134ff0>] (worker_thread+0x204/0x4b4)
 [<c0134ff0>] (worker_thread) from [<c013a330>] (kthread+0xfc/0x134)
 [<c013a330>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
----[ end trace dcc7596eadcf5a46 ]---
+---[ end trace 504f51187809f5ce ]---
 tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -372,28 +370,6 @@
 tegra-xusb 70090000.usb: failed to get regulators: -517
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
-as3722-sd2: supplied by +5V_SYS
-as3722-sd3: supplied by +5V_SYS
-as3722-sd4: supplied by +5V_SYS
-as3722-sd5: supplied by +5V_SYS
-as3722-ldo0: supplied by +1.35V_LP0(sd2)
-as3722-ldo2: supplied by +1.8V_VDDIO
-as3722-ldo3: supplied by +3.3V_SYS
-as3722-ldo4: supplied by +3.3V_SYS
-as3722-ldo5: supplied by +1.8V_VDDIO
-+VDDIO_SDMMC3: bypassed regulator has no supply!
-+VDDIO_SDMMC3: failed to get the current voltage(-517)
-as3722-regulator as3722-regulator: regulator 13 register failed -517
-tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
-tegra-ahci 70027000.sata: Failed to get regulators
-tegra-xusb 70090000.usb: Failed to get supply 'avddio-pex': -517
-tegra-xusb 70090000.usb: failed to get regulators: -517
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_RUN: supplied by +3.3V_SYS
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
@@ -405,48 +381,48 @@
 [5a5a5c76] *pgd=00000000
 Internal error: Oops: 5 [#1] PREEMPT SMP ARM
 Modules linked in:
-CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: G        W       4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
+CPU: 2 PID: 73 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc2-next-20170105-143855-ged93c11 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
-task: ee8b4200 task.stack: ee998000
+task: eebe2b80 task.stack: ee028000
 PC is at regulator_enable+0x18/0x120
 LR is at regulator_enable+0x28/0x120
-pc : [<c03db7a4>]    lr : [<c03db7b4>]    psr: 60000113
-sp : ee999cb8  ip : 00000000  fp : c0d02d00
-r10: ee22a458  r9 : 00000003  r8 : c0955460
-r7 : 00000000  r6 : 00000000  r5 : 5a5a5a5a  r4 : ee22a410
-r3 : 0000005a  r2 : 00000000  r1 : c03db7fc  r0 : ee226200
+pc : [<c03db898>]    lr : [<c03db8a8>]    psr: 60000113
+sp : ee029cb8  ip : 00000000  fp : c0d02d00
+r10: ee207458  r9 : 00000003  r8 : c0955460
+r7 : 00000000  r6 : 00000000  r5 : 5a5a5a5a  r4 : ee207410
+r3 : 0000005a  r2 : 00000000  r1 : c03db8f0  r0 : ee200940
 Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
 Control: 10c5387d  Table: 8000406a  DAC: 00000051
-Process kworker/0:1 (pid: 29, stack limit = 0xee998210)
-Stack: (0xee999cb8 to 0xee99a000)
-9ca0:                                                       ee22a410 ee225800
-9cc0: 00000000 c03db7b4 ee22a410 ee1e7400 00000000 c03db7b4 ee22a410 00000000
-9ce0: 00000000 c0455f6c 00000000 eeb7a810 ee22a410 ee030608 00000000 ee030400
-9d00: ee0305f0 ee030400 ee222840 c0412ee0 00000000 00000000 00000000 00000001
-9d20: ee22a000 c044e3c4 00000000 00000001 ffffffff 00000000 ee22a000 00000000
-9d40: 00000000 c0d364dc 00000000 00000000 ee23de00 c0434a2c c0d364dc ee030410
-9d60: 00000000 c0d365f4 00000000 ee22a000 ee030400 00000000 00000000 c0d365f4
-9d80: 00000011 c044df5c c044df2c ee030410 c0dadefc c0412c0c c0412bf0 c0467694
-9da0: 00000000 00000000 ee999dd8 c046783c 00000001 c0daded8 00000000 c0465c24
-9dc0: eea82170 eeb7e3b8 ee030410 ee030444 c0d36040 c0467410 ee030410 00000001
-9de0: 00000000 ee030410 ee030410 c0d36040 ee988010 c0466aac ee030410 00000000
-9e00: ee030418 c0464f50 00000000 0000001c c045558c 00000000 ee030400 ee22a410
-9e20: eeb7f380 ee0305f0 ee0305c8 eef925c0 ee030410 c0412dd8 eefc8974 eebd0dac
-9e40: c0d360ac c0d36008 ee22a410 eebd0c10 00000011 c04136ec ee22a410 ee994a10
-9e60: 00000000 ee994a00 00000000 c0457c1c 00000000 ee993740 ee22a410 00000000
-9e80: ffffffed ee994a10 fffffdfb c0d36758 c0d36758 c0468d30 c0468ce0 ee994a10
-9ea0: c0dadefc 00000000 00000000 c0467694 00000000 00000000 ee999ee8 c046783c
-9ec0: 00000001 00000000 00000000 c0465c24 ee888d70 eeb7e2b8 ee994a10 ee994a44
-9ee0: c0d36ce8 c0467410 ee994a10 00000001 ee8b4200 ee994a10 ee994a10 c0d36ce8
-9f00: eef95900 c0466aac ee994a10 c0d36c60 c0d36c80 c0466ee0 ee991680 c0d36c88
-9f20: eef925c0 c0134bb4 eef925c0 eef9a500 ee991680 ee991698 00000001 eef925c0
-9f40: ee991698 eef925c0 00000008 c0134ddc eef959f5 ee991680 eef925d8 c0134ff0
-9f60: ee853ee0 ee98dbc0 00000000 ee98dbc0 00000000 ee98d600 ee98dbdc ee991680
-9f80: ee853ee0 c0134dec 00000000 c013a330 ee98d600 c013a234 00000000 00000000
+Process kworker/2:1 (pid: 73, stack limit = 0xee028210)
+Stack: (0xee029cb8 to 0xee02a000)
+9ca0:                                                       ee207410 ee207c00
+9cc0: 00000000 c03db8a8 ee207410 ee1ebc00 00000000 c03db8a8 ee207410 00000000
+9ce0: 00000000 c04560ec 00000000 eebc7810 ee207410 eebc6e08 00000000 eebc6c00
+9d00: eebc6df0 eebc6c00 ee201780 c0412fd4 00000000 00000000 00000000 00000001
+9d20: ee207000 c044e544 00000000 00000001 ffffffff 00000000 ee207000 00000000
+9d40: 00000000 c0d3651c 00000000 00000000 ee216080 c0434bac c0d3651c eebc6c10
+9d60: 00000000 c0d36634 00000000 ee207000 eebc6c00 00000000 00000000 c0d36634
+9d80: 00000011 c044e0dc c044e0ac eebc6c10 c0dadefc c0412d00 c0412ce4 c0467814
+9da0: 00000000 00000000 ee029dd8 c04679bc 00000001 c0daded8 00000000 c0465da4
+9dc0: eeb5ea70 eeb85238 eebc6c10 eebc6c44 c0d36080 c0467590 eebc6c10 00000001
+9de0: 00000000 eebc6c10 eebc6c10 c0d36080 ee988010 c0466c2c eebc6c10 00000000
+9e00: eebc6c18 c04650d0 00000000 0000001c c045570c 00000000 eebc6c00 ee207410
+9e20: ee04b080 eebc6df0 eebc6dc8 eefae5c0 eebc6c10 c0412ecc eefc8974 eebda5ac
+9e40: c0d360ec c0d36048 ee207410 eebda410 00000011 c04137e0 ee207410 ee994a10
+9e60: 00000000 ee994a00 00000000 c0457d9c 00000000 ee993740 ee207410 00000000
+9e80: ffffffed ee994a10 fffffdfb c0d36798 c0d36798 c0468eb0 c0468e60 ee994a10
+9ea0: c0dadefc 00000000 00000000 c0467814 00000000 00000000 ee029ee8 c04679bc
+9ec0: 00000001 00000000 00000000 c0465da4 ee888d70 eeb85138 ee994a10 ee994a44
+9ee0: c0d36d28 c0467590 ee994a10 00000001 eebe2b80 ee994a10 ee994a10 c0d36d28
+9f00: eefb1900 c0466c2c ee994a10 c0d36ca0 c0d36cc0 c0467060 eeb75d00 c0d36cc8
+9f20: eefae5c0 c0134bb4 eefae5c0 00000000 eeb75d00 eeb75d18 00000001 eefae5c0
+9f40: eeb75d18 eefae5c0 00000008 c0134ddc eefb19f5 eeb75d00 eefae5d8 c0134ff0
+9f60: ee8a9ee0 eeb60d80 00000000 eeb60d80 00000000 ee020c80 eeb60d9c eeb75d00
+9f80: ee8a9ee0 c0134dec 00000000 c013a330 ee020c80 c013a234 00000000 00000000
 9fa0: 00000000 00000000 00000000 c0107938 00000000 00000000 00000000 00000000
 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 eeff7fff ffff6fef
-[<c03db7a4>] (regulator_enable) from [<c03db7b4>] (regulator_enable+0x28/0x120)
+9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff fbfffeff
+[<c03db898>] (regulator_enable) from [<c03db8a8>] (regulator_enable+0x28/0x120)
 Code: e5905030 e3130001 13a04000 1a000015 (e595021c) 
----[ end trace dcc7596eadcf5a47 ]---
+---[ end trace 504f51187809f5cf ]---
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.688587513 -0800
+++ /tmp/foob	2017-01-04 20:43:09.692587528 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -42,20 +42,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.6 MiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 7409888 (7110e0 hex)
+Bytes transferred = 7411608 (711798 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7110e0 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x711798 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -63,7 +63,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 4 20:34:45 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -88,7 +88,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1995844K/2097148K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35768K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1995844K/2097148K available (9216K kernel code, 1203K rwdata, 4148K rodata, 2048K init, 471K bss, 35768K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -334,24 +334,24 @@
 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 91 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 1 PID: 91 Comm: kworker/1:1 Not tainted 4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
+CPU: 1 PID: 91 Comm: kworker/1:1 Not tainted 4.10.0-rc2-next-20170105-143855-ged93c11 #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
-[<c030b158>] (show_stack) from [<c0597170>] (dump_stack+0x84/0xa4)
-[<c0597170>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
+[<c030b158>] (show_stack) from [<c0597190>] (dump_stack+0x84/0xa4)
+[<c0597190>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
 [<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
-[<c0341bd8>] (warn_slowpath_null) from [<c07db348>] (driver_probe_device+0x288/0x2c0)
-[<c07db348>] (driver_probe_device) from [<c07d983c>] (bus_for_each_drv+0x44/0x8c)
-[<c07d983c>] (bus_for_each_drv) from [<c07db038>] (__device_attach+0x9c/0x100)
-[<c07db038>] (__device_attach) from [<c07da6d4>] (bus_probe_device+0x84/0x8c)
-[<c07da6d4>] (bus_probe_device) from [<c07dab08>] (deferred_probe_work_func+0x60/0x8c)
-[<c07dab08>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
+[<c0341bd8>] (warn_slowpath_null) from [<c07db4fc>] (driver_probe_device+0x288/0x2c0)
+[<c07db4fc>] (driver_probe_device) from [<c07d99f0>] (bus_for_each_drv+0x44/0x8c)
+[<c07d99f0>] (bus_for_each_drv) from [<c07db1ec>] (__device_attach+0x9c/0x100)
+[<c07db1ec>] (__device_attach) from [<c07da888>] (bus_probe_device+0x84/0x8c)
+[<c07da888>] (bus_probe_device) from [<c07dacbc>] (deferred_probe_work_func+0x60/0x8c)
+[<c07dacbc>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
 [<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
 [<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
 [<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
 [<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace f82ed558b3fd43cc ]---
+---[ end trace 58b469db06c8523c ]---
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.700587557 -0800
+++ /tmp/foob	2017-01-04 20:43:09.700587557 -0800
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################################
+	 ###################################################
 	 3.6 MiB/s
 done
-Bytes transferred = 5504592 (53fe50 hex)
+Bytes transferred = 5505056 (540020 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x53fe50 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x540020 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -62,7 +62,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 4 20:34:17 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -73,7 +73,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c0d5f2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f380, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -96,7 +96,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60980   ( 387 kB)
+      .data : 0xc0d00000 - 0xc0d60a40   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe308   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -298,12 +298,12 @@
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-NET: Registered protocol family 17
-NET: Registered protocol family 15
-can: controller area network core (rev 20120528 abi 9)
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20161123 t)
@@ -401,4 +401,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.993694] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# [    2.983852] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.724587646 -0800
+++ /tmp/foob	2017-01-04 20:43:09.724587646 -0800
@@ -49,18 +49,18 @@
 	 ##################################################
 	 4.1 MiB/s
 done
-Bytes transferred = 7409888 (7110e0 hex)
+Bytes transferred = 7411608 (711798 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4.1 MiB/s
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7110e0 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x711798 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -68,7 +68,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 4 20:34:45 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -91,7 +91,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 955752K/1048576K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 27288K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 955752K/1048576K available (9216K kernel code, 1203K rwdata, 4148K rodata, 2048K init, 471K bss, 27288K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -343,7 +343,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 02:59:26 UTC (1423191566)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 03:02:27 UTC (1423191747)
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.736587690 -0800
+++ /tmp/foob	2017-01-04 20:43:09.740587704 -0800
@@ -44,10 +44,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################################
+	 ###################################################
 	 4 MiB/s
 done
-Bytes transferred = 5504592 (53fe50 hex)
+Bytes transferred = 5505056 (540020 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -58,7 +58,7 @@
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x53fe50 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x540020 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -67,7 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 4 20:34:17 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -76,7 +76,7 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0d5f2c0, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0d5f380, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -99,7 +99,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60980   ( 387 kB)
+      .data : 0xc0d00000 - 0xc0d60a40   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe308   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -309,21 +309,17 @@
 tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input
 tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input
 tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
 mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
+tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
 tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
 tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
-mmc1: new high speed SD card at address b368
+mmc0: new high speed SDHC card at address b368
 NET: Registered protocol family 10
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+mmc1: new high speed SD card at address b368
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
@@ -331,6 +327,7 @@
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20161123 t)
 can: netlink gateway (rev 20130117) max_hops=1
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
 Bluetooth: RFCOMM socket layer initialized
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
@@ -342,24 +339,28 @@
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
+ mmcblk0: p1
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 02:57:54 UTC (1423191474)
+hub 1-1:1.0: USB hub found
+rtc-em3027 2-0056: setting system clock to 2015-02-06 03:00:55 UTC (1423191655)
+hub 1-1:1.0: 4 ports detected
 ALSA device list:
   #0: tegra-trimslice
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+random: fast init done
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-random: fast init done
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.989155] asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.752587749 -0800
+++ /tmp/foob	2017-01-04 20:43:09.756587763 -0800
@@ -41,18 +41,18 @@
 	 ##################################################
 	 3.3 MiB/s
 done
-Bytes transferred = 7409888 (7110e0 hex)
+Bytes transferred = 7411608 (711798 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7110e0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x711798 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Wed Jan 4 20:34:45 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994868K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35724K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994868K/2096128K available (9216K kernel code, 1203K rwdata, 4148K rodata, 2048K init, 471K bss, 35724K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -306,18 +306,18 @@
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
-tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 mmc1: new high speed MMC card at address 0001
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
-tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
  mmcblk0: p1 p2 p3
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -395,5 +395,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.093949] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.133950] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-04 20:43:09.760587778 -0800
+++ /tmp/foob	2017-01-04 20:43:09.764587793 -0800
@@ -36,21 +36,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##################################################
+	 ###################################################
 	 3.3 MiB/s
 done
-Bytes transferred = 5504592 (53fe50 hex)
+Bytes transferred = 5505056 (540020 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x53fe50 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x540020 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
+Linux version 4.10.0-rc2-next-20170105-143855-ged93c11 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Wed Jan 4 20:34:17 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -68,7 +68,7 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d5f2c0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0d5f380, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
@@ -91,7 +91,7 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0008000 - 0xc0900000   (9184 kB)
       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
-      .data : 0xc0d00000 - 0xc0d60980   ( 387 kB)
+      .data : 0xc0d00000 - 0xc0d60a40   ( 387 kB)
        .bss : 0xc0d62000 - 0xc0dbe308   ( 369 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -390,4 +390,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.340581] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.340512] usb 2-1: new high-speed USB device number 2 using tegra-ehci
