Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.344802230 -0800
+++ /tmp/foob	2017-01-03 19:58:12.348802244 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -39,20 +39,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 2.9 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 7405512 (70ffc8 hex)
+Bytes transferred = 7409888 (7110e0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x70ffc8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7110e0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jan 2 21:20:14 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -71,7 +71,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c142b280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c142b300, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -84,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994948K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 470K bss, 35644K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994948K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35644K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142cd80   (1204 kB)
-       .bss : 0xc142e000 - 0xc14a3bf0   ( 471 kB)
+      .data : 0xc1300000 - 0xc142ce00   (1204 kB)
+       .bss : 0xc142e000 - 0xc14a3c30   ( 472 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -306,30 +306,30 @@
 Registering SWP/SWPB emulation handler
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
-VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 mmc0: new high speed SDHC card at address aaaa
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 [drm] Cannot find any crtc or sizes - going 1024x768
-Console: switching to colour frame buffer device 128x48
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
  mmcblk0: p1 p2 p3
-tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
+Console: switching to colour frame buffer device 128x48
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
- mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-27 16:52:55 UTC (972665575)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-28 15:22:38 UTC (972746558)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -341,4 +341,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.429419] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.439403] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.368802318 -0800
+++ /tmp/foob	2017-01-03 19:58:12.372802333 -0800
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.3 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 5504264 (53fd08 hex)
+Bytes transferred = 5504592 (53fe50 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x53fd08 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x53fe50 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jan 2 21:20:05 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -321,7 +321,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-27 16:50:09 UTC (972665409)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-28 15:19:56 UTC (972746396)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -335,4 +335,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.721096] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.709684] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.388802392 -0800
+++ /tmp/foob	2017-01-03 19:58:12.388802392 -0800
@@ -34,20 +34,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.8 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 7405512 (70ffc8 hex)
+Bytes transferred = 7409888 (7110e0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x70ffc8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7110e0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jan 2 21:20:14 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -66,7 +66,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c142b280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c142b300, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -79,7 +79,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994828K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 470K bss, 35764K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994828K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35764K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,8 +89,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142cd80   (1204 kB)
-       .bss : 0xc142e000 - 0xc14a3bf0   ( 471 kB)
+      .data : 0xc1300000 - 0xc142ce00   (1204 kB)
+       .bss : 0xc142e000 - 0xc14a3c30   ( 472 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -313,38 +313,38 @@
 +12V_SATA: supplied by +VDD_MUX
 usb2-0 supply vbus not found, using dummy regulator
 usb2-1 supply vbus not found, using dummy regulator
+usb3-0 supply vbus not found, using dummy regulator
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
  mmcblk0: p1
-usb3-0 supply vbus not found, using dummy regulator
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 ------------[ cut here ]------------
-WARNING: CPU: 1 PID: 91 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
+WARNING: CPU: 2 PID: 60 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 1 PID: 91 Comm: kworker/1:1 Not tainted 4.10.0-rc2-next-20170103-143161-g533d7e3 #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Not tainted 4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
 [<c030b158>] (show_stack) from [<c0597170>] (dump_stack+0x84/0xa4)
-[<c0597170>] (dump_stack) from [<c0341bcc>] (__warn+0xd4/0x100)
-[<c0341bcc>] (__warn) from [<c0341c18>] (warn_slowpath_null+0x20/0x28)
-[<c0341c18>] (warn_slowpath_null) from [<c07dad7c>] (driver_probe_device+0x288/0x2c0)
-[<c07dad7c>] (driver_probe_device) from [<c07d9270>] (bus_for_each_drv+0x44/0x8c)
-[<c07d9270>] (bus_for_each_drv) from [<c07daa6c>] (__device_attach+0x9c/0x100)
-[<c07daa6c>] (__device_attach) from [<c07da108>] (bus_probe_device+0x84/0x8c)
-[<c07da108>] (bus_probe_device) from [<c07da53c>] (deferred_probe_work_func+0x60/0x8c)
-[<c07da53c>] (deferred_probe_work_func) from [<c0357004>] (process_one_work+0x134/0x33c)
-[<c0357004>] (process_one_work) from [<c0357234>] (process_scheduled_works+0x28/0x38)
-[<c0357234>] (process_scheduled_works) from [<c035745c>] (worker_thread+0x218/0x4f0)
-[<c035745c>] (worker_thread) from [<c035c7d4>] (kthread+0xfc/0x134)
-[<c035c7d4>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace 19d9b10c5a701e10 ]---
+[<c0597170>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
+[<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
+[<c0341bd8>] (warn_slowpath_null) from [<c07db348>] (driver_probe_device+0x288/0x2c0)
+[<c07db348>] (driver_probe_device) from [<c07d983c>] (bus_for_each_drv+0x44/0x8c)
+[<c07d983c>] (bus_for_each_drv) from [<c07db038>] (__device_attach+0x9c/0x100)
+[<c07db038>] (__device_attach) from [<c07da6d4>] (bus_probe_device+0x84/0x8c)
+[<c07da6d4>] (bus_probe_device) from [<c07dab08>] (deferred_probe_work_func+0x60/0x8c)
+[<c07dab08>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
+[<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
+[<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
+[<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
+[<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
+---[ end trace e09f88ab1692dd95 ]---
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 as3722-sd4: supplied by +5V_SYS
@@ -359,28 +359,28 @@
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
 ------------[ cut here ]------------
-WARNING: CPU: 1 PID: 91 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
+WARNING: CPU: 2 PID: 60 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
 Modules linked in:
-CPU: 1 PID: 91 Comm: kworker/1:1 Tainted: G        W       4.10.0-rc2-next-20170103-143161-g533d7e3 #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
 [<c030b158>] (show_stack) from [<c0597170>] (dump_stack+0x84/0xa4)
-[<c0597170>] (dump_stack) from [<c0341bcc>] (__warn+0xd4/0x100)
-[<c0341bcc>] (__warn) from [<c0341c18>] (warn_slowpath_null+0x20/0x28)
-[<c0341c18>] (warn_slowpath_null) from [<c06e3698>] (regulator_unregister+0xc0/0xcc)
-[<c06e3698>] (regulator_unregister) from [<c07ddc34>] (release_nodes+0x164/0x1dc)
-[<c07ddc34>] (release_nodes) from [<c07daba0>] (driver_probe_device+0xac/0x2c0)
-[<c07daba0>] (driver_probe_device) from [<c07d9270>] (bus_for_each_drv+0x44/0x8c)
-[<c07d9270>] (bus_for_each_drv) from [<c07daa6c>] (__device_attach+0x9c/0x100)
-[<c07daa6c>] (__device_attach) from [<c07da108>] (bus_probe_device+0x84/0x8c)
-[<c07da108>] (bus_probe_device) from [<c07da53c>] (deferred_probe_work_func+0x60/0x8c)
-[<c07da53c>] (deferred_probe_work_func) from [<c0357004>] (process_one_work+0x134/0x33c)
-[<c0357004>] (process_one_work) from [<c0357234>] (process_scheduled_works+0x28/0x38)
-[<c0357234>] (process_scheduled_works) from [<c035745c>] (worker_thread+0x218/0x4f0)
-[<c035745c>] (worker_thread) from [<c035c7d4>] (kthread+0xfc/0x134)
-[<c035c7d4>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace 19d9b10c5a701e11 ]---
+[<c0597170>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
+[<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
+[<c0341bd8>] (warn_slowpath_null) from [<c06e3c64>] (regulator_unregister+0xc0/0xcc)
+[<c06e3c64>] (regulator_unregister) from [<c07de200>] (release_nodes+0x164/0x1dc)
+[<c07de200>] (release_nodes) from [<c07db16c>] (driver_probe_device+0xac/0x2c0)
+[<c07db16c>] (driver_probe_device) from [<c07d983c>] (bus_for_each_drv+0x44/0x8c)
+[<c07d983c>] (bus_for_each_drv) from [<c07db038>] (__device_attach+0x9c/0x100)
+[<c07db038>] (__device_attach) from [<c07da6d4>] (bus_probe_device+0x84/0x8c)
+[<c07da6d4>] (bus_probe_device) from [<c07dab08>] (deferred_probe_work_func+0x60/0x8c)
+[<c07dab08>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
+[<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
+[<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
+[<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
+[<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
+---[ end trace e09f88ab1692dd96 ]---
 tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
 tegra-ehci 7d008000.usb: EHCI Host Controller
@@ -402,48 +402,48 @@
 [000dbd9c] *pgd=00000000
 Internal error: Oops: 5 [#1] SMP ARM
 Modules linked in:
-CPU: 1 PID: 91 Comm: kworker/1:1 Tainted: G        W       4.10.0-rc2-next-20170103-143161-g533d7e3 #1
+CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W       4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
-task: ee5fd940 task.stack: ee728000
+task: ee3e0a80 task.stack: ee45c000
 PC is at regulator_enable+0x18/0x120
 LR is at regulator_enable+0x28/0x120
-pc : [<c06e3880>]    lr : [<c06e3890>]    psr: 60000113
-sp : ee729cb8  ip : 00000000  fp : c1302d00
-r10: ee7dd858  r9 : 00000003  r8 : c0d38548
-r7 : 00000000  r6 : 00000000  r5 : 000dbba0  r4 : ee7dd810
-r3 : 00000080  r2 : 00000000  r1 : c06e38d8  r0 : ee74d880
+pc : [<c06e3e4c>]    lr : [<c06e3e5c>]    psr: 60000113
+sp : ee45dcb8  ip : 00000000  fp : c1302d00
+r10: ee7e5858  r9 : 00000003  r8 : c0d38ac8
+r7 : 00000000  r6 : 00000000  r5 : 000dbba0  r4 : ee7e5810
+r3 : 00000080  r2 : 00000000  r1 : c06e3ea4  r0 : ee784c80
 Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
 Control: 10c5387d  Table: 8020406a  DAC: 00000051
-Process kworker/1:1 (pid: 91, stack limit = 0xee728220)
-Stack: (0xee729cb8 to 0xee72a000)
-9ca0:                                                       ee7dd810 ee7dc000
-9cc0: 00000000 c06e3890 ee7dd810 ee0f5800 00000000 c06e3890 ee7dd810 00000000
-9ce0: 00000000 c07c9568 00000000 ee3d4010 ee7dd810 ee599be8 00000000 ee599a00
-9d00: ee599bd4 ee599a00 ee74e480 c074e750 00000000 00000000 00000000 00000001
-9d20: ee7ddc00 c07c1a4c 00000000 00000001 ffffffff 00000000 ee7ddc00 00000000
-9d40: 00000000 c1400224 00000000 00000000 ee758800 c0770d10 00000000 ee7ddc00
-9d60: c1400224 ee599a10 00000000 ee7ddc00 ee599a00 00000000 00000000 c140033c
-9d80: 00000010 c07c15e4 c07c15b4 ee599a10 c1472e48 c074e47c c074e460 c07dacf0
-9da0: 00000000 00000000 ee729dd8 c07dae98 00000001 c1472e24 00000000 c07d9270
-9dc0: ee3dc16c ee3cc9b8 ee599a10 ee599a44 c13fec60 c07daa6c ee599a10 00000001
-9de0: 00000000 ee599a10 ee599a10 c13fec60 ee1a1e10 c07da108 ee599a10 00000000
-9e00: ee599a18 c07d857c 00000000 0000001c c07c8b88 00000000 ee599a00 ee7dd810
-9e20: ee58a900 ee599bd4 ee599bb0 eefa1740 ee599a10 c074e648 eefc9974 ee599984
-9e40: c13fecc8 c13fec30 ee7dd810 ee599810 00000010 c074ef70 ee7dd810 ee1e2410
-9e60: 00000000 ee1e2400 00000000 c07cb218 00000000 ee1c8100 ee7dd810 00000000
-9e80: fffffffe ee1e2410 fffffdfb c14004a0 c14004a0 c07dc454 c07dc404 ee1e2410
-9ea0: c1472e48 00000000 00000000 c07dacf0 00000000 00000000 ee729ee8 c07dae98
-9ec0: 00000001 00000000 00000000 c07d9270 ee04276c ee3ccab8 ee1e2410 ee1e2444
-9ee0: c14009f8 c07daa6c ee1e2410 00000001 ee060540 ee1e2410 ee1e2410 c14009f8
-9f00: eefa4800 c07da108 ee1e2410 c1400978 c1400994 c07da53c ee0d6600 c140099c
-9f20: eefa1740 c0357004 ee0d6600 c0be2d20 ee0d6600 ee0d6618 00000001 eefa1740
-9f40: ee0d6618 eefa1740 00000008 c0357234 eefa48f5 ee0d6600 eefa1758 c035745c
-9f60: ee09fee0 ee1a43c0 00000000 ee1a43c0 00000000 ee0d2580 ee1a43dc ee0d6600
-9f80: ee09fee0 c0357244 00000000 c035c7d4 ee0d2580 c035c6d8 00000000 00000000
-9fa0: 00000000 00000000 00000000 c0307f78 00000000 00000000 00000000 00000000
-9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
-[<c06e3880>] (regulator_enable) from [<c06e3890>] (regulator_enable+0x28/0x120)
+Process kworker/2:1 (pid: 60, stack limit = 0xee45c220)
+Stack: (0xee45dcb8 to 0xee45e000)
+dca0:                                                       ee7e5810 ee7e4c00
+dcc0: 00000000 c06e3e5c ee7e5810 ee476400 00000000 c06e3e5c ee7e5810 00000000
+dce0: 00000000 c07c9b34 00000000 ee5a4010 ee7e5810 ee5739e8 00000000 ee573800
+dd00: ee5739d4 ee573800 ee785480 c074ed1c 00000000 00000000 00000000 00000001
+dd20: ee7e5c00 c07c2018 00000000 00000001 ffffffff 00000000 ee7e5c00 00000000
+dd40: 00000000 c1400280 00000000 00000000 ee78ecc0 c07712dc 00000000 ee7e5c00
+dd60: c1400280 ee573810 00000000 ee7e5c00 ee573800 00000000 00000000 c1400398
+dd80: 00000010 c07c1bb0 c07c1b80 ee573810 c1472e88 c074ea48 c074ea2c c07db2bc
+dda0: 00000000 00000000 ee45ddd8 c07db464 00000001 c1472e64 00000000 c07d983c
+ddc0: ee57b16c ee57e738 ee573810 ee573844 c13fecbc c07db038 ee573810 00000001
+dde0: 00000000 ee573810 ee573810 c13fecbc ee1a1e10 c07da6d4 ee573810 00000000
+de00: ee573818 c07d8b48 00000000 0000001c c07c9154 00000000 ee573800 ee7e5810
+de20: ee578b80 ee5739d4 ee5739b0 eefaf740 ee573810 c074ec14 eefc9974 ee573784
+de40: c13fed24 c13fec8c ee7e5810 ee573610 00000010 c074f53c ee7e5810 ee1e2410
+de60: 00000000 ee1e2400 00000000 c07cb7e4 00000000 ee1c8100 ee7e5810 00000000
+de80: fffffffe ee1e2410 fffffdfb c14004fc c14004fc c07dca20 c07dc9d0 ee1e2410
+dea0: c1472e88 00000000 00000000 c07db2bc 00000000 00000000 ee45dee8 c07db464
+dec0: 00000001 00000000 00000000 c07d983c ee04276c ee57e838 ee1e2410 ee1e2444
+dee0: c1400a58 c07db038 ee1e2410 00000001 ee063f00 ee1e2410 ee1e2410 c1400a58
+df00: eefb2800 c07da6d4 ee1e2410 c14009d8 c14009f4 c07dab08 ee1a5080 c14009fc
+df20: eefaf740 c0356fc4 ee1a5080 c0be3510 ee1a5080 ee1a5098 00000001 eefaf740
+df40: ee1a5098 eefaf740 00000008 c03571f4 eefb28f5 ee1a5080 eefaf758 c035741c
+df60: ee0b3ee0 ee0d2640 00000000 ee0d2640 00000000 ee1a41c0 ee0d265c ee1a5080
+df80: ee0b3ee0 c0357204 00000000 c035c794 ee1a41c0 c035c698 00000000 00000000
+dfa0: 00000000 00000000 00000000 c0307f78 00000000 00000000 00000000 00000000
+dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
+[<c06e3e4c>] (regulator_enable) from [<c06e3e5c>] (regulator_enable+0x28/0x120)
 Code: e5905030 e3130001 13a04000 1a000015 (e59501fc) 
----[ end trace 19d9b10c5a701e12 ]---
+---[ end trace e09f88ab1692dd97 ]---
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.424802525 -0800
+++ /tmp/foob	2017-01-03 19:58:12.428802540 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -34,7 +34,7 @@
 	 ##################################################
 	 4 MiB/s
 done
-Bytes transferred = 5504264 (53fd08 hex)
+Bytes transferred = 5504592 (53fe50 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -45,7 +45,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x53fd08 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x53fe50 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -54,7 +54,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jan 2 21:20:05 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -323,51 +323,130 @@
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 gpio gpiochip1: (as3722-gpio): could not create pin range
 as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517
-Unable to handle kernel NULL pointer dereference at virtual address 00000020
-pgd = c0004000
-[00000020] *pgd=00000000
-Internal error: Oops: 5 [#1] PREEMPT SMP ARM
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
++VDDIO_SDMMC3: bypassed regulator has no supply!
++VDDIO_SDMMC3: failed to get the current voltage(-517)
+as3722-regulator as3722-regulator: regulator 13 register failed -517
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:4136 regulator_unregister+0xc0/0xcc
 Modules linked in:
-CPU: 3 PID: 42 Comm: kworker/3:1 Not tainted 4.10.0-rc2-next-20170103-143161-g533d7e3 #1
+CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
-task: eeb09680 task.stack: eeb0a000
-PC is at pinctrl_put+0xc/0x34
-LR is at pinctrl_unregister+0x40/0xe0
-pc : [<c037f24c>]    lr : [<c037f2bc>]    psr: 00000013
-sp : eeb0be70  ip : 00000000  fp : c0d02d00
-r10: c046a00c  r9 : c046a008  r8 : eeb0be88
-r7 : 00000004  r6 : ee20abbc  r5 : ee205e00  r4 : ee20ab40
-r3 : eeb09680  r2 : 00000020  r1 : c037f2ac  r0 : 00000000
-Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
-Control: 10c5387d  Table: 8000406a  DAC: 00000051
-Process kworker/3:1 (pid: 42, stack limit = 0xeeb0a210)
-Stack: (0xeeb0be70 to 0xeeb0c000)
-be60:                                     c037f35c ee207640 ee205e00 ee099010
-be80: 00000004 c046a56c ee203b80 ee207640 ee099010 c0dadefc 00000000 fffffdfb
-bea0: c0d19410 eefbc5c0 00000008 c0467504 00000000 00000000 eeb0bee8 c04677fc
-bec0: 00000001 00000000 00000000 c0465be4 ee888d70 eeb55338 ee099010 ee099044
-bee0: c0d36ce8 c04673d0 ee099010 00000001 eeb09680 ee099010 ee099010 c0d36ce8
-bf00: eefbf900 c0466a6c ee099010 c0d36c60 c0d36c80 c0466ea0 ee8bd380 c0d36c88
-bf20: eefbc5c0 c0134bb4 eefbc5c0 00000000 ee8bd380 ee8bd398 00000001 eefbc5c0
-bf40: ee8bd398 eefbc5c0 00000008 c0134ddc eefbf9f5 ee8bd380 eefbc5d8 c0134ff0
-bf60: ee8b7ee0 ee98da80 00000000 ee98da80 00000000 eeabbb00 ee98da9c ee8bd380
-bf80: ee8b7ee0 c0134dec 00000000 c013a330 eeabbb00 c013a234 00000000 00000000
-bfa0: 00000000 00000000 00000000 c0107938 00000000 00000000 00000000 00000000
-bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 7fffffff
-[<c037f24c>] (pinctrl_put) from [<c037f2bc>] (pinctrl_unregister+0x40/0xe0)
-[<c037f2bc>] (pinctrl_unregister) from [<c046a56c>] (release_nodes+0x164/0x1dc)
-[<c046a56c>] (release_nodes) from [<c0467504>] (driver_probe_device+0xac/0x2c0)
-[<c0467504>] (driver_probe_device) from [<c0465be4>] (bus_for_each_drv+0x44/0x8c)
-[<c0465be4>] (bus_for_each_drv) from [<c04673d0>] (__device_attach+0x9c/0x100)
-[<c04673d0>] (__device_attach) from [<c0466a6c>] (bus_probe_device+0x84/0x8c)
-[<c0466a6c>] (bus_probe_device) from [<c0466ea0>] (deferred_probe_work_func+0x60/0x8c)
-[<c0466ea0>] (deferred_probe_work_func) from [<c0134bb4>] (process_one_work+0x120/0x320)
+[<c010f308>] (unwind_backtrace) from [<c010a900>] (show_stack+0x10/0x14)
+[<c010a900>] (show_stack) from [<c034e03c>] (dump_stack+0x84/0xa4)
+[<c034e03c>] (dump_stack) from [<c011fb34>] (__warn+0xd4/0x100)
+[<c011fb34>] (__warn) from [<c011fb80>] (warn_slowpath_null+0x20/0x28)
+[<c011fb80>] (warn_slowpath_null) from [<c03db5bc>] (regulator_unregister+0xc0/0xcc)
+[<c03db5bc>] (regulator_unregister) from [<c046a5ac>] (release_nodes+0x164/0x1dc)
+[<c046a5ac>] (release_nodes) from [<c0467544>] (driver_probe_device+0xac/0x2c0)
+[<c0467544>] (driver_probe_device) from [<c0465c24>] (bus_for_each_drv+0x44/0x8c)
+[<c0465c24>] (bus_for_each_drv) from [<c0467410>] (__device_attach+0x9c/0x100)
+[<c0467410>] (__device_attach) from [<c0466aac>] (bus_probe_device+0x84/0x8c)
+[<c0466aac>] (bus_probe_device) from [<c0466ee0>] (deferred_probe_work_func+0x60/0x8c)
+[<c0466ee0>] (deferred_probe_work_func) from [<c0134bb4>] (process_one_work+0x120/0x320)
 [<c0134bb4>] (process_one_work) from [<c0134ddc>] (process_scheduled_works+0x28/0x38)
 [<c0134ddc>] (process_scheduled_works) from [<c0134ff0>] (worker_thread+0x204/0x4b4)
 [<c0134ff0>] (worker_thread) from [<c013a330>] (kthread+0xfc/0x134)
 [<c013a330>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
-Code: eaffffab f57ff05b e2802020 f592f000 (e1921f9f) 
----[ end trace ebb1bd5aff41b597 ]---
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
+---[ end trace dcc7596eadcf5a46 ]---
+tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
+tegra-ahci 70027000.sata: Failed to get regulators
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 355, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tegra-xusb 70090000.usb: Failed to get supply 'avddio-pex': -517
+tegra-xusb 70090000.usb: failed to get regulators: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
+tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
++VDDIO_SDMMC3: bypassed regulator has no supply!
++VDDIO_SDMMC3: failed to get the current voltage(-517)
+as3722-regulator as3722-regulator: regulator 13 register failed -517
+tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
+tegra-ahci 70027000.sata: Failed to get regulators
+tegra-xusb 70090000.usb: Failed to get supply 'avddio-pex': -517
+tegra-xusb 70090000.usb: failed to get regulators: -517
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
+Unable to handle kernel paging request at virtual address 5a5a5c76
+pgd = c0004000
+[5a5a5c76] *pgd=00000000
+Internal error: Oops: 5 [#1] PREEMPT SMP ARM
+Modules linked in:
+CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: G        W       4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: events deferred_probe_work_func
+task: ee8b4200 task.stack: ee998000
+PC is at regulator_enable+0x18/0x120
+LR is at regulator_enable+0x28/0x120
+pc : [<c03db7a4>]    lr : [<c03db7b4>]    psr: 60000113
+sp : ee999cb8  ip : 00000000  fp : c0d02d00
+r10: ee22a458  r9 : 00000003  r8 : c0955460
+r7 : 00000000  r6 : 00000000  r5 : 5a5a5a5a  r4 : ee22a410
+r3 : 0000005a  r2 : 00000000  r1 : c03db7fc  r0 : ee226200
+Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
+Control: 10c5387d  Table: 8000406a  DAC: 00000051
+Process kworker/0:1 (pid: 29, stack limit = 0xee998210)
+Stack: (0xee999cb8 to 0xee99a000)
+9ca0:                                                       ee22a410 ee225800
+9cc0: 00000000 c03db7b4 ee22a410 ee1e7400 00000000 c03db7b4 ee22a410 00000000
+9ce0: 00000000 c0455f6c 00000000 eeb7a810 ee22a410 ee030608 00000000 ee030400
+9d00: ee0305f0 ee030400 ee222840 c0412ee0 00000000 00000000 00000000 00000001
+9d20: ee22a000 c044e3c4 00000000 00000001 ffffffff 00000000 ee22a000 00000000
+9d40: 00000000 c0d364dc 00000000 00000000 ee23de00 c0434a2c c0d364dc ee030410
+9d60: 00000000 c0d365f4 00000000 ee22a000 ee030400 00000000 00000000 c0d365f4
+9d80: 00000011 c044df5c c044df2c ee030410 c0dadefc c0412c0c c0412bf0 c0467694
+9da0: 00000000 00000000 ee999dd8 c046783c 00000001 c0daded8 00000000 c0465c24
+9dc0: eea82170 eeb7e3b8 ee030410 ee030444 c0d36040 c0467410 ee030410 00000001
+9de0: 00000000 ee030410 ee030410 c0d36040 ee988010 c0466aac ee030410 00000000
+9e00: ee030418 c0464f50 00000000 0000001c c045558c 00000000 ee030400 ee22a410
+9e20: eeb7f380 ee0305f0 ee0305c8 eef925c0 ee030410 c0412dd8 eefc8974 eebd0dac
+9e40: c0d360ac c0d36008 ee22a410 eebd0c10 00000011 c04136ec ee22a410 ee994a10
+9e60: 00000000 ee994a00 00000000 c0457c1c 00000000 ee993740 ee22a410 00000000
+9e80: ffffffed ee994a10 fffffdfb c0d36758 c0d36758 c0468d30 c0468ce0 ee994a10
+9ea0: c0dadefc 00000000 00000000 c0467694 00000000 00000000 ee999ee8 c046783c
+9ec0: 00000001 00000000 00000000 c0465c24 ee888d70 eeb7e2b8 ee994a10 ee994a44
+9ee0: c0d36ce8 c0467410 ee994a10 00000001 ee8b4200 ee994a10 ee994a10 c0d36ce8
+9f00: eef95900 c0466aac ee994a10 c0d36c60 c0d36c80 c0466ee0 ee991680 c0d36c88
+9f20: eef925c0 c0134bb4 eef925c0 eef9a500 ee991680 ee991698 00000001 eef925c0
+9f40: ee991698 eef925c0 00000008 c0134ddc eef959f5 ee991680 eef925d8 c0134ff0
+9f60: ee853ee0 ee98dbc0 00000000 ee98dbc0 00000000 ee98d600 ee98dbdc ee991680
+9f80: ee853ee0 c0134dec 00000000 c013a330 ee98d600 c013a234 00000000 00000000
+9fa0: 00000000 00000000 00000000 c0107938 00000000 00000000 00000000 00000000
+9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 eeff7fff ffff6fef
+[<c03db7a4>] (regulator_enable) from [<c03db7b4>] (regulator_enable+0x28/0x120)
+Code: e5905030 e3130001 13a04000 1a000015 (e595021c) 
+---[ end trace dcc7596eadcf5a47 ]---
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.464802672 -0800
+++ /tmp/foob	2017-01-03 19:58:12.468802687 -0800
@@ -42,20 +42,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 2.9 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 7405512 (70ffc8 hex)
+Bytes transferred = 7409888 (7110e0 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x70ffc8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7110e0 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -63,7 +63,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jan 2 21:20:14 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -75,7 +75,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524287
-free_area_init_node: node 0, pgdat c142b280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c142b300, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -88,7 +88,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1995844K/2097148K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 470K bss, 35768K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1995844K/2097148K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35768K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,8 +98,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142cd80   (1204 kB)
-       .bss : 0xc142e000 - 0xc14a3bf0   ( 471 kB)
+      .data : 0xc1300000 - 0xc142ce00   (1204 kB)
+       .bss : 0xc142e000 - 0xc14a3c30   ( 472 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -305,7 +305,6 @@
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20161123 t)
@@ -322,83 +321,94 @@
 usb3-0 supply vbus not found, using dummy regulator
 usb3-1 supply vbus not found, using dummy regulator
 tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
 panel supply power not found, using dummy regulator
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 ------------[ cut here ]------------
-WARNING: CPU: 0 PID: 97 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
+WARNING: CPU: 1 PID: 91 at drivers/base/dd.c:362 driver_probe_device+0x288/0x2c0
 Modules linked in:
-CPU: 0 PID: 97 Comm: kworker/0:2 Not tainted 4.10.0-rc2-next-20170103-143161-g533d7e3 #1
+CPU: 1 PID: 91 Comm: kworker/1:1 Not tainted 4.10.0-rc2-next-20170104-143507-gd7ebc8e #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events deferred_probe_work_func
 [<c030faf8>] (unwind_backtrace) from [<c030b158>] (show_stack+0x10/0x14)
 [<c030b158>] (show_stack) from [<c0597170>] (dump_stack+0x84/0xa4)
-[<c0597170>] (dump_stack) from [<c0341bcc>] (__warn+0xd4/0x100)
-[<c0341bcc>] (__warn) from [<c0341c18>] (warn_slowpath_null+0x20/0x28)
-[<c0341c18>] (warn_slowpath_null) from [<c07dad7c>] (driver_probe_device+0x288/0x2c0)
-[<c07dad7c>] (driver_probe_device) from [<c07d9270>] (bus_for_each_drv+0x44/0x8c)
-[<c07d9270>] (bus_for_each_drv) from [<c07daa6c>] (__device_attach+0x9c/0x100)
-[<c07daa6c>] (__device_attach) from [<c07da108>] (bus_probe_device+0x84/0x8c)
-[<c07da108>] (bus_probe_device) from [<c07da53c>] (deferred_probe_work_func+0x60/0x8c)
-[<c07da53c>] (deferred_probe_work_func) from [<c0357004>] (process_one_work+0x134/0x33c)
-[<c0357004>] (process_one_work) from [<c0357234>] (process_scheduled_works+0x28/0x38)
-[<c0357234>] (process_scheduled_works) from [<c035745c>] (worker_thread+0x218/0x4f0)
-[<c035745c>] (worker_thread) from [<c035c7d4>] (kthread+0xfc/0x134)
-[<c035c7d4>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
----[ end trace c3d71bc6d5dc85ef ]---
-gpio gpiochip1: (as3722-gpio): could not create pin range
-as3722-pinctrl as3722-pinctrl: Couldn't add pin range, -517
-Unable to handle kernel NULL pointer dereference at virtual address 00000020
-pgd = c0204000
-[00000020] *pgd=00000000
-Internal error: Oops: 5 [#1] SMP ARM
-Modules linked in:
-CPU: 0 PID: 97 Comm: kworker/0:2 Tainted: G        W       4.10.0-rc2-next-20170103-143161-g533d7e3 #1
-Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
-Workqueue: events deferred_probe_work_func
-task: ee0ade80 task.stack: ee774000
-PC is at pinctrl_put+0xc/0x34
-LR is at pinctrl_unregister+0x44/0x1e0
-pc : [<c05d956c>]    lr : [<c05d95e0>]    psr: 00000013
-sp : ee775e58  ip : 00000000  fp : c1302d00
-r10: c07dd6d4  r9 : c07dd6d0  r8 : ee775e88
-r7 : ee476c7c  r6 : ee6d6610  r5 : ee777a00  r4 : ee476c00
-r3 : ee0ade80  r2 : 00000020  r1 : c05d95d0  r0 : 00000000
-Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
-Control: 10c5387d  Table: 8020406a  DAC: 00000051
-Process kworker/0:2 (pid: 97, stack limit = 0xee774220)
-Stack: (0xee775e58 to 0xee776000)
-5e40:                                                       ffffffff 00000000
-5e60: 00000000 c035dab0 ee77f3c0 ee777a00 ee6d6610 00000006 ee775e88 c07dd6d0
-5e80: c07dd6d4 c07ddc34 ee6c43c0 ee77f3c0 ee6d6610 c1472e48 00000000 fffffdfb
-5ea0: c13419d4 eef92740 00000009 c07daba0 00000000 00000000 ee775ee8 c07dae98
-5ec0: 00000001 00000000 00000000 c07d9270 ee04276c ee40c438 ee6d6610 ee6d6644
-5ee0: c14009f8 c07daa6c ee6d6610 00000001 ee060000 ee6d6610 ee6d6610 c14009f8
-5f00: eef95800 c07da108 ee6d6610 c1400978 c1400994 c07da53c ee478180 c140099c
-5f20: eef92740 c0357004 00000000 eefbcb40 ee478180 ee478198 00000001 eef92740
-5f40: ee478198 eef92740 00000008 c0357234 eef958f5 ee478180 eef92758 c035745c
-5f60: ee079ee0 ee743240 00000000 ee743240 00000000 ee474980 ee74325c ee478180
-5f80: ee079ee0 c0357244 00000000 c035c7d4 ee474980 c035c6d8 00000000 00000000
-5fa0: 00000000 00000000 00000000 c0307f78 00000000 00000000 00000000 00000000
-5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
-5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
-[<c05d956c>] (pinctrl_put) from [<c05d95e0>] (pinctrl_unregister+0x44/0x1e0)
-[<c05d95e0>] (pinctrl_unregister) from [<c07ddc34>] (release_nodes+0x164/0x1dc)
-[<c07ddc34>] (release_nodes) from [<c07daba0>] (driver_probe_device+0xac/0x2c0)
-[<c07daba0>] (driver_probe_device) from [<c07d9270>] (bus_for_each_drv+0x44/0x8c)
-[<c07d9270>] (bus_for_each_drv) from [<c07daa6c>] (__device_attach+0x9c/0x100)
-[<c07daa6c>] (__device_attach) from [<c07da108>] (bus_probe_device+0x84/0x8c)
-[<c07da108>] (bus_probe_device) from [<c07da53c>] (deferred_probe_work_func+0x60/0x8c)
-[<c07da53c>] (deferred_probe_work_func) from [<c0357004>] (process_one_work+0x134/0x33c)
-[<c0357004>] (process_one_work) from [<c0357234>] (process_scheduled_works+0x28/0x38)
-[<c0357234>] (process_scheduled_works) from [<c035745c>] (worker_thread+0x218/0x4f0)
-[<c035745c>] (worker_thread) from [<c035c7d4>] (kthread+0xfc/0x134)
-[<c035c7d4>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
-Code: eaffffab f57ff05b e2802020 f592f000 (e1921f9f) 
----[ end trace c3d71bc6d5dc85f0 ]---
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
+[<c0597170>] (dump_stack) from [<c0341b8c>] (__warn+0xd4/0x100)
+[<c0341b8c>] (__warn) from [<c0341bd8>] (warn_slowpath_null+0x20/0x28)
+[<c0341bd8>] (warn_slowpath_null) from [<c07db348>] (driver_probe_device+0x288/0x2c0)
+[<c07db348>] (driver_probe_device) from [<c07d983c>] (bus_for_each_drv+0x44/0x8c)
+[<c07d983c>] (bus_for_each_drv) from [<c07db038>] (__device_attach+0x9c/0x100)
+[<c07db038>] (__device_attach) from [<c07da6d4>] (bus_probe_device+0x84/0x8c)
+[<c07da6d4>] (bus_probe_device) from [<c07dab08>] (deferred_probe_work_func+0x60/0x8c)
+[<c07dab08>] (deferred_probe_work_func) from [<c0356fc4>] (process_one_work+0x134/0x33c)
+[<c0356fc4>] (process_one_work) from [<c03571f4>] (process_scheduled_works+0x28/0x38)
+[<c03571f4>] (process_scheduled_works) from [<c035741c>] (worker_thread+0x218/0x4f0)
+[<c035741c>] (worker_thread) from [<c035c794>] (kthread+0xfc/0x134)
+[<c035c794>] (kthread) from [<c0307f78>] (ret_from_fork+0x14/0x3c)
+---[ end trace f82ed558b3fd43cc ]---
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
++3.3V_PANEL: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
+elan_i2c 1-0015: failed to read report data: -121
+tegra-sor 54540000.sor: failed to probe output: -517
+panel supply power not found, using dummy regulator
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: Switching to 3.3V signalling voltage failed
+mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc2: Unknown controller version (3). You may experience problems.
+mmc2: Invalid maximum block size, assuming 512 bytes
+elan_i2c 1-0015: invalid report id data (ff)
+mmc1: new high speed SDIO card at address 0001
+mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+Console: switching to colour frame buffer device 170x48
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
++1.8V_RUN_CAM: disabling
++3.3V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++2.8V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
++5V_VDD_TS_SW: disabling
++5V_USB_HS: disabling
++5V_USB_SS: disabling
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): recovery complete
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.476802716 -0800
+++ /tmp/foob	2017-01-03 19:58:12.480802731 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -40,20 +40,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 877 KiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 5504264 (53fd08 hex)
+Bytes transferred = 5504592 (53fe50 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 872.1 KiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x53fd08 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x53fe50 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -62,7 +62,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jan 2 21:20:05 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -298,12 +298,12 @@
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20161123 t)
@@ -364,12 +364,12 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
 GPT:Primary header alternate_lba != Alt. header my_lba
 GPT:3014591 != 15564799
 GPT:Primary header thinks Alt. header is not at the end of the disk.
@@ -380,7 +380,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:28 UTC (946684828)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -392,13 +392,13 @@
   #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
-uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.974218] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+root@(none):/# [    2.993694] usb 1-3: new high-speed USB device number 3 using tegra-xusb
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.484802746 -0800
+++ /tmp/foob	2017-01-03 19:58:12.488802760 -0800
@@ -49,18 +49,18 @@
 	 ##################################################
 	 4.1 MiB/s
 done
-Bytes transferred = 7405512 (70ffc8 hex)
+Bytes transferred = 7409888 (7110e0 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x70ffc8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7110e0 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -68,7 +68,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jan 2 21:20:14 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -78,7 +78,7 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c142b280, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c142b300, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -91,7 +91,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 955752K/1048576K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 470K bss, 27288K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 955752K/1048576K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 27288K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -101,8 +101,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142cd80   (1204 kB)
-       .bss : 0xc142e000 - 0xc14a3bf0   ( 471 kB)
+      .data : 0xc1300000 - 0xc142ce00   (1204 kB)
+       .bss : 0xc142e000 - 0xc14a3c30   ( 472 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -343,7 +343,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 02:56:00 UTC (1423191360)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 02:59:26 UTC (1423191566)
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.496802790 -0800
+++ /tmp/foob	2017-01-03 19:58:12.500802805 -0800
@@ -45,9 +45,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 4.1 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 5504264 (53fd08 hex)
+Bytes transferred = 5504592 (53fe50 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -58,7 +58,7 @@
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x53fd08 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x53fe50 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -67,7 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jan 2 21:20:05 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -310,15 +310,15 @@
 tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input
 tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
 tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
-tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
-tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
-NET: Registered protocol family 10
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
+tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
+tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 mmc1: new high speed SD card at address b368
+NET: Registered protocol family 10
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
  mmcblk1: p1 p2
 Segment Routing with IPv6
@@ -349,18 +349,17 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 02:54:29 UTC (1423191269)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 02:57:54 UTC (1423191474)
 ALSA device list:
   #0: tegra-trimslice
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-random: fast init done
-asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
+random: fast init done
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    2.989155] asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.504802819 -0800
+++ /tmp/foob	2017-01-03 19:58:12.508802834 -0800
@@ -41,18 +41,18 @@
 	 ##################################################
 	 3.3 MiB/s
 done
-Bytes transferred = 7405512 (70ffc8 hex)
+Bytes transferred = 7409888 (7110e0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x70ffc8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7110e0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jan 2 21:20:14 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jan 3 19:50:19 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -70,7 +70,7 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c142b280, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c142b300, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1994868K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 470K bss, 35724K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994868K/2096128K available (9216K kernel code, 1203K rwdata, 4144K rodata, 2048K init, 471K bss, 35724K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0xc0208000 - 0xc0c00000   (10208 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc142cd80   (1204 kB)
-       .bss : 0xc142e000 - 0xc14a3bf0   ( 471 kB)
+      .data : 0xc1300000 - 0xc142ce00   (1204 kB)
+       .bss : 0xc142e000 - 0xc14a3c30   ( 472 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU debugfs-based tracing is enabled.
@@ -311,12 +311,12 @@
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -395,5 +395,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.083625] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.093949] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-03 19:58:12.516802864 -0800
+++ /tmp/foob	2017-01-03 19:58:12.516802864 -0800
@@ -39,18 +39,18 @@
 	 ##################################################
 	 3.3 MiB/s
 done
-Bytes transferred = 5504264 (53fd08 hex)
+Bytes transferred = 5504592 (53fe50 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x53fd08 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x53fe50 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc2-next-20170103-143161-g533d7e3 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jan 2 21:20:05 PST 2017
+Linux version 4.10.0-rc2-next-20170104-143507-gd7ebc8e (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jan 3 19:49:51 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -390,4 +390,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.360522] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.340581] usb 2-1: new high-speed USB device number 2 using tegra-ehci
