U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 2.8 MiB/s done Bytes transferred = 8159752 (7c8208 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 2.9 MiB/s done Bytes transferred = 51860 (ca94 hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffffa93 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-next-20170908-199620-gda52d78 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Sep 11 15:05:03 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158e5c0, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef88000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993400K/2096128K available (10240K kernel code, 1626K rwdata, 4508K rodata, 2048K init, 405K bss, 37192K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1596910 (1627 kB) [ 0.000000] .bss : 0xc159fbc0 - 0xc160537c ( 406 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000013] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000031] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000040] Switching to timer-based delay loop, resolution 1000ns [ 0.002862] Console: colour dummy device 80x30 [ 0.002893] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.002903] pid_max: default: 32768 minimum: 301 [ 0.002985] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002994] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003397] CPU: Testing write buffer coherency: ok [ 0.003704] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003932] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.005256] Hierarchical SRCU implementation. [ 0.006576] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.007132] EFI services will not be available. [ 0.007233] smp: Bringing up secondary CPUs ... [ 0.010376] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020354] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.030334] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.030388] smp: Brought up 1 node, 4 CPUs [ 0.030401] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.030406] CPU: All CPU(s) started in SVC mode. [ 0.031116] devtmpfs: initialized [ 0.041500] Built 1 zonelists, mobility grouping on. Total pages: 514734 [ 0.041896] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.042543] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.042567] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.042791] pinctrl core: initialized pinctrl subsystem [ 0.043952] DMI not present or invalid. [ 0.044185] NET: Registered protocol family 16 [ 0.046851] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048651] cpuidle: using governor menu [ 0.062157] No ATAGs? [ 0.062258] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.062269] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.066510] Serial: AMBA PL011 UART driver [ 0.066990] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.067096] iommu: Adding device reg-dummy to group 0 [ 0.067131] iommu: Adding device 3000.pcie to group 1 [ 0.067151] iommu: Adding device 50000000.host1x to group 2 [ 0.067170] iommu: Adding device 54040000.mpe to group 3 [ 0.067189] iommu: Adding device 54080000.vi to group 4 [ 0.067208] iommu: Adding device 540c0000.epp to group 5 [ 0.067227] iommu: Adding device 54100000.isp to group 6 [ 0.067244] iommu: Adding device 54140000.gr2d to group 7 [ 0.067262] iommu: Adding device 54180000.gr3d to group 8 [ 0.067333] iommu: Adding device 54200000.dc to group 9 [ 0.067383] iommu: Adding device 54240000.dc to group 10 [ 0.067403] iommu: Adding device 54280000.hdmi to group 11 [ 0.067422] iommu: Adding device 50040600.timer to group 12 [ 0.067440] iommu: Adding device 50043000.cache-controller to group 13 [ 0.067458] iommu: Adding device 60005000.timer to group 14 [ 0.067476] iommu: Adding device 60007000.flow-controller to group 15 [ 0.067493] iommu: Adding device 6000a000.dma to group 16 [ 0.067515] iommu: Adding device 6000c000.ahb to group 17 [ 0.067535] iommu: Adding device 6000d000.gpio to group 18 [ 0.067551] iommu: Adding device 70000800.apbmisc to group 19 [ 0.067576] iommu: Adding device 70000868.pinmux to group 20 [ 0.067594] iommu: Adding device 70006000.serial to group 21 [ 0.067611] iommu: Adding device 7000e000.rtc to group 22 [ 0.067631] iommu: Adding device 7000c000.i2c to group 23 [ 0.067648] iommu: Adding device 7000c400.i2c to group 24 [ 0.067670] iommu: Adding device 7000c500.i2c to group 25 [ 0.067690] iommu: Adding device 7000c700.i2c to group 26 [ 0.067709] iommu: Adding device 7000d000.i2c to group 27 [ 0.067727] iommu: Adding device 7000da00.spi to group 28 [ 0.067745] iommu: Adding device 7000e400.pmc to group 29 [ 0.067764] iommu: Adding device 7000f000.memory-controller to group 30 [ 0.067789] iommu: Adding device 7000f800.fuse to group 31 [ 0.067813] iommu: Adding device 70080000.ahub to group 32 [ 0.067831] iommu: Adding device 78000000.sdhci to group 33 [ 0.067855] iommu: Adding device 78000600.sdhci to group 34 [ 0.067873] iommu: Adding device 7d000000.usb to group 35 [ 0.067892] iommu: Adding device 7d000000.usb-phy to group 36 [ 0.067909] iommu: Adding device 7d004000.usb to group 37 [ 0.067930] iommu: Adding device 7d004000.usb-phy to group 38 [ 0.067947] iommu: Adding device 7d008000.usb to group 39 [ 0.067966] iommu: Adding device 7d008000.usb-phy to group 40 [ 0.067982] iommu: Adding device pmu to group 41 [ 0.068010] iommu: Adding device clocks to group 42 [ 0.068028] iommu: Adding device gpio-leds to group 43 [ 0.068045] iommu: Adding device regulators to group 44 [ 0.068063] iommu: Adding device regulators:regulator@0 to group 45 [ 0.068081] iommu: Adding device regulators:regulator@1 to group 46 [ 0.068099] iommu: Adding device regulators:regulator@2 to group 47 [ 0.068117] iommu: Adding device regulators:regulator@3 to group 48 [ 0.068134] iommu: Adding device regulators:regulator@4 to group 49 [ 0.068151] iommu: Adding device regulators:regulator@5 to group 50 [ 0.068174] iommu: Adding device regulators:regulator@6 to group 51 [ 0.068199] iommu: Adding device regulators:regulator@7 to group 52 [ 0.068218] iommu: Adding device regulators:regulator@8 to group 53 [ 0.068236] iommu: Adding device sound to group 54 [ 0.076677] AT91: Could not find identification node [ 0.077188] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.077203] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.077255] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.077262] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.077311] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.077319] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.077420] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.077427] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.079230] vgaarb: loaded [ 0.079695] SCSI subsystem initialized [ 0.079834] libata version 3.00 loaded. [ 0.080011] usbcore: registered new interface driver usbfs [ 0.080049] usbcore: registered new interface driver hub [ 0.080086] usbcore: registered new device driver usb [ 0.084418] iommu: Adding device tps65910-gpio to group 55 [ 0.084699] iommu: Adding device tps65910-pmic to group 56 [ 0.087175] vrtc: supplied by vdd_5v_in [ 0.090457] vio: supplied by vdd_5v_in [ 0.101809] vdd1: supplied by vdd_5v_in [ 0.103167] vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV [ 0.111862] vdd2: supplied by vdd_5v_in [ 0.131805] ldo1: supplied by vdd_1v5_gen [ 0.134178] ldo2: supplied by vdd_1v5_gen [ 0.134649] vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV [ 0.136867] ldo3: supplied by vdd_5v_in [ 0.139207] ldo4: supplied by vdd_5v_in [ 0.141800] ldo5: supplied by vdd_5v_in [ 0.151807] ldo6: supplied by vdd_1v8_gen [ 0.152277] avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV [ 0.154508] ldo7: supplied by vdd_1v8_gen [ 0.161808] ldo8: supplied by vdd_1v8_gen [ 0.170079] iommu: Adding device tps65910-rtc to group 57 [ 0.170190] iommu: Adding device tps65910-power to group 58 [ 0.171967] pps_core: LinuxPPS API ver. 1 registered [ 0.171974] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.171990] PTP clock support registered [ 0.172126] EDAC MC: Ver: 3.0.0 [ 0.172319] dmi: Firmware registration failed. [ 0.173642] clocksource: Switched to clocksource timer_us [ 0.205672] NET: Registered protocol family 2 [ 0.206083] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.206139] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.206223] TCP: Hash tables configured (established 8192 bind 8192) [ 0.206366] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.206434] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.206602] NET: Registered protocol family 1 [ 0.206937] RPC: Registered named UNIX socket transport module. [ 0.206945] RPC: Registered udp transport module. [ 0.206949] RPC: Registered tcp transport module. [ 0.206953] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.206962] PCI: CLS 0 bytes, default 64 [ 0.207809] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.208035] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.208525] iommu: Adding device alarmtimer to group 59 [ 0.209218] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.212577] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.212972] NFS: Registering the id_resolver key type [ 0.213003] Key type id_resolver registered [ 0.213008] Key type id_legacy registered [ 0.213039] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.214027] bounce: pool size: 64 pages [ 0.214074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.214082] io scheduler noop registered [ 0.214087] io scheduler deadline registered [ 0.214243] io scheduler cfq registered (default) [ 0.214249] io scheduler mq-deadline registered [ 0.214254] io scheduler kyber registered [ 0.220554] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.220570] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.220584] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.220593] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.221026] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.221069] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.221391] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.221403] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.221415] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.221455] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.221484] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.221513] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.221552] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.222019] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.222129] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.227434] tegra-pcie 3000.pcie: 2x3 configuration [ 0.227605] tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517 [ 0.233287] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.235324] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.264056] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.264144] iommu: Adding device serial8250 to group 60 [ 0.266170] console [ttyS0] disabled [ 0.266208] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.646979] console [ttyS0] enabled [ 1.651002] SuperH (H)SCI(F) driver initialized [ 1.656146] msm_serial: driver initialized [ 1.660342] STMicroelectronics ASC driver initialized [ 1.669358] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.682278] brd: module loaded [ 1.690669] loop: module loaded [ 1.699598] m25p80 spi0.1: w25q32 (4096 Kbytes) [ 1.705403] iommu: Adding device Fixed MDIO bus.0 to group 61 [ 1.711553] libphy: Fixed MDIO Bus: probed [ 1.716291] CAN device driver interface [ 1.720673] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.727081] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.732897] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.738845] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.745796] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.753417] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.760859] usbcore: registered new interface driver pegasus [ 1.766535] usbcore: registered new interface driver asix [ 1.771936] usbcore: registered new interface driver ax88179_178a [ 1.778041] usbcore: registered new interface driver cdc_ether [ 1.783897] usbcore: registered new interface driver smsc75xx [ 1.789652] usbcore: registered new interface driver smsc95xx [ 1.795410] usbcore: registered new interface driver net1080 [ 1.801070] usbcore: registered new interface driver cdc_subset [ 1.807002] usbcore: registered new interface driver zaurus [ 1.812589] usbcore: registered new interface driver cdc_ncm [ 1.818438] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.826196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.832707] ehci-pci: EHCI PCI platform driver [ 1.837177] ehci-platform: EHCI generic platform driver [ 1.842508] ehci-orion: EHCI orion driver [ 1.846607] SPEAr-ehci: EHCI SPEAr driver [ 1.850681] ehci-st: EHCI STMicroelectronics driver [ 1.855633] ehci-exynos: EHCI EXYNOS driver [ 1.859890] ehci-atmel: EHCI Atmel driver [ 1.863971] tegra-ehci: Tegra EHCI driver [ 1.868275] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.874463] ohci-pci: OHCI PCI platform driver [ 1.878922] ohci-platform: OHCI generic platform driver [ 1.884259] SPEAr-ohci: OHCI SPEAr driver [ 1.888334] ohci-st: OHCI STMicroelectronics driver [ 1.893272] ohci-atmel: OHCI Atmel driver [ 1.897713] usbcore: registered new interface driver usb-storage [ 1.905983] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.912481] iommu: Adding device ci_hdrc.0 to group 62 [ 1.923129] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.930295] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.949039] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.956631] i2c /dev entries driver [ 1.962309] IR NEC protocol handler initialized [ 1.966842] IR RC5(x/sz) protocol handler initialized [ 1.971878] IR RC6 protocol handler initialized [ 1.976402] IR JVC protocol handler initialized [ 1.980918] IR Sony protocol handler initialized [ 1.985527] IR SANYO protocol handler initialized [ 1.990216] IR Sharp protocol handler initialized [ 1.994911] IR MCE Keyboard/mouse protocol handler initialized [ 2.000726] IR XMP protocol handler initialized [ 2.011316] sdhci: Secure Digital Host Controller Interface driver [ 2.017502] sdhci: Copyright(c) Pierre Ossman [ 2.022770] Synopsys Designware Multimedia Card Interface Driver [ 2.029528] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.035711] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 2.040584] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 2.053760] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.123738] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 2.140137] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.203662] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.212548] ledtrig-cpu: registered to indicate activity on CPUs [ 2.218827] usbcore: registered new interface driver usbhid [ 2.224398] usbhid: USB HID core driver [ 2.230732] NET: Registered protocol family 10 [ 2.235890] Segment Routing with IPv6 [ 2.239587] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.245895] NET: Registered protocol family 17 [ 2.250333] can: controller area network core (rev 20170425 abi 9) [ 2.256557] NET: Registered protocol family 29 [ 2.260987] can: raw protocol (rev 20170425) [ 2.265260] can: broadcast manager protocol (rev 20170425 t) [ 2.270908] can: netlink gateway (rev 20170425) max_hops=1 [ 2.276673] Key type dns_resolver registered [ 2.281319] ThumbEE CPU extension supported. [ 2.285603] Registering SWP/SWPB emulation handler [ 2.300987] vdd_ddr: supplied by vdd_5v_in [ 2.305930] vdd_5v_sata: supplied by vdd_5v_in [ 2.310710] usb1_vbus: supplied by vdd_5v_in [ 2.315300] usb3_vbus: supplied by vdd_5v_in [ 2.320803] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 2.326741] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 2.332243] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 2.337332] mmc1: new high speed MMC card at address 0001 [ 2.338117] mmcblk1: mmc1:0001 SEM16G 14.8 GiB [ 2.339017] mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 2.339579] mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 2.340477] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB [ 2.341285] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.341907] mmcblk0: mmc0:aaaa SS04G 3.69 GiB [ 2.353181] Primary GPT is invalid, using alternate GPT. [ 2.353197] mmcblk1: p1 p2 p3 p4 p5 [ 2.369305] mmcblk0: p1 p2 p3 [ 2.388806] tegra-pcie 3000.pcie: 2x3 configuration [ 2.397319] tegra-pcie 3000.pcie: probing port 0, using 2 lanes [ 2.461504] tegra-pcie 3000.pcie: probing port 2, using 2 lanes [ 2.871256] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.280289] tegra-pcie 3000.pcie: link 2 down, retrying [