U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################ 3.1 MiB/s done Bytes transferred = 7077928 (6c0028 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.5 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6c0028 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-next-20160523-95490-gcbafe21 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 23 12:18:04 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141bb00, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4216K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc106c574 (14738 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141db60 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ca0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001782] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001788] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001795] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001799] Switching to timer-based delay loop, resolution 83ns [ 0.001998] Console: colour dummy device 80x30 [ 0.002010] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002016] pid_max: default: 32768 minimum: 301 [ 0.002054] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002058] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002304] CPU: Testing write buffer coherency: ok [ 0.002415] /cpus/cpu@0 missing clock-frequency property [ 0.002430] /cpus/cpu@1 missing clock-frequency property [ 0.002444] /cpus/cpu@2 missing clock-frequency property [ 0.002458] /cpus/cpu@3 missing clock-frequency property [ 0.002463] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002473] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003715] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004313] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006957] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011952] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016677] Brought up 4 CPUs [ 0.016685] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016688] CPU: All CPU(s) started in SVC mode. [ 0.017229] devtmpfs: initialized [ 0.023682] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.023964] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024489] pinctrl core: initialized pinctrl subsystem [ 0.025149] NET: Registered protocol family 16 [ 0.025826] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036710] cpuidle: using governor menu [ 0.043089] No ATAGs? [ 0.043101] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043105] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045206] Serial: AMBA PL011 UART driver [ 0.046336] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.063462] +5V_SYS: supplied by +VDD_MUX [ 0.063567] +3.3V_SYS: supplied by +VDD_MUX [ 0.063788] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.063793] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.063824] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.063828] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.063858] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.063862] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.063891] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.063896] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.063975] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.063980] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.064009] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.064013] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.065139] vgaarb: loaded [ 0.065424] SCSI subsystem initialized [ 0.065494] libata version 3.00 loaded. [ 0.065595] usbcore: registered new interface driver usbfs [ 0.065618] usbcore: registered new interface driver hub [ 0.065643] usbcore: registered new device driver usb [ 0.067058] pps_core: LinuxPPS API ver. 1 registered [ 0.067062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.067070] PTP clock support registered [ 0.067141] EDAC MC: Ver: 3.0.0 [ 0.067575] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.067584] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.068074] clocksource: Switched to clocksource arch_sys_counter [ 0.071735] NET: Registered protocol family 2 [ 0.071948] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.071982] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.072045] TCP: Hash tables configured (established 8192 bind 8192) [ 0.072068] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.072082] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072145] NET: Registered protocol family 1 [ 0.072247] RPC: Registered named UNIX socket transport module. [ 0.072250] RPC: Registered udp transport module. [ 0.072253] RPC: Registered tcp transport module. [ 0.072256] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072260] PCI: CLS 0 bytes, default 64 [ 0.072708] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.073269] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.073555] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.077393] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.077699] NFS: Registering the id_resolver key type [ 0.077714] Key type id_resolver registered [ 0.077716] Key type id_legacy registered [ 0.077734] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.078212] bounce: pool size: 64 pages [ 0.078286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.078290] io scheduler noop registered [ 0.078293] io scheduler deadline registered [ 0.078304] io scheduler cfq registered (default) [ 0.080222] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.089084] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.089778] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.110375] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.111516] console [ttyS0] disabled [ 0.111532] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.965412] console [ttyS0] enabled [ 0.969232] SuperH (H)SCI(F) driver initialized [ 0.974120] msm_serial: driver initialized [ 0.978280] STMicroelectronics ASC driver initialized [ 0.984767] [drm] Initialized drm 1.1.0 20060810 [ 0.990795] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 0.997347] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.004558] panel supply power not found, using dummy regulator [ 1.014272] brd: module loaded [ 1.019408] loop: module loaded [ 1.023451] as3722 4-0040: AS3722 with revision 0x1 found [ 1.033208] as3722-sd2: supplied by +5V_SYS [ 1.037617] as3722-sd3: supplied by +5V_SYS [ 1.041967] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.048165] as3722-sd4: supplied by +5V_SYS [ 1.052493] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.058243] as3722-sd5: supplied by +5V_SYS [ 1.063833] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.069571] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.075591] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.081210] as3722-ldo3: supplied by +3.3V_SYS [ 1.085667] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.093248] as3722-ldo4: supplied by +3.3V_SYS [ 1.097836] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.103859] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.108628] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.115327] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.121366] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.126139] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.132694] as3722-ldo9: supplied by +5V_SYS [ 1.137259] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.143473] as3722-ldo10: supplied by +5V_SYS [ 1.147974] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.154421] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.172644] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.178906] libphy: Fixed MDIO Bus: probed [ 1.183240] CAN device driver interface [ 1.187777] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.194726] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.201453] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208861] usbcore: registered new interface driver pegasus [ 1.214530] usbcore: registered new interface driver asix [ 1.219934] usbcore: registered new interface driver ax88179_178a [ 1.226030] usbcore: registered new interface driver cdc_ether [ 1.231875] usbcore: registered new interface driver smsc75xx [ 1.237632] usbcore: registered new interface driver smsc95xx [ 1.243381] usbcore: registered new interface driver net1080 [ 1.249045] usbcore: registered new interface driver cdc_subset [ 1.254967] usbcore: registered new interface driver zaurus [ 1.260556] usbcore: registered new interface driver cdc_ncm [ 1.266928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.273446] ehci-pci: EHCI PCI platform driver [ 1.277893] ehci-platform: EHCI generic platform driver [ 1.283184] ehci-omap: OMAP-EHCI Host Controller driver [ 1.288449] ehci-orion: EHCI orion driver [ 1.292495] SPEAr-ehci: EHCI SPEAr driver [ 1.296552] ehci-st: EHCI STMicroelectronics driver [ 1.301473] ehci-exynos: EHCI EXYNOS driver [ 1.305706] ehci-atmel: EHCI Atmel driver [ 1.309759] tegra-ehci: Tegra EHCI driver [ 1.313828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319999] ohci-pci: OHCI PCI platform driver [ 1.324450] ohci-platform: OHCI generic platform driver [ 1.329723] ohci-omap3: OHCI OMAP3 driver [ 1.333778] SPEAr-ohci: OHCI SPEAr driver [ 1.337826] ohci-st: OHCI STMicroelectronics driver [ 1.342747] ohci-atmel: OHCI Atmel driver [ 1.347017] usbcore: registered new interface driver usb-storage [ 1.353610] mousedev: PS/2 mouse device common for all mice [ 1.359587] 1-0015 supply vcc not found, using dummy regulator [ 1.366649] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.373516] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.380426] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.387566] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.393931] i2c /dev entries driver [ 1.399807] 0-004c supply vcc not found, using dummy regulator [ 1.409696] sdhci: Secure Digital Host Controller Interface driver [ 1.415872] sdhci: Copyright(c) Pierre Ossman [ 1.420785] Synopsys Designware Multimedia Card Interface Driver [ 1.427179] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.433130] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.438794] mmc0: Unknown controller version (3). You may experience problems. [ 1.446151] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.451028] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.455918] mmc0: Unknown controller version (3). You may experience problems. [ 1.463238] mmc0: Unknown controller version (3). You may experience problems. [ 1.470479] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.508082] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.514797] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.524731] ledtrig-cpu: registered to indicate activity on CPUs [ 1.530847] usbcore: registered new interface driver usbhid [ 1.536411] usbhid: USB HID core driver [ 1.542336] NET: Registered protocol family 10 [ 1.547058] sit: IPv6 over IPv4 tunneling driver [ 1.551905] NET: Registered protocol family 17 [ 1.556348] can: controller area network core (rev 20120528 abi 9) [ 1.562543] NET: Registered protocol family 29 [ 1.566979] can: raw protocol (rev 20120528) [ 1.571241] can: broadcast manager protocol (rev 20120528 t) [ 1.576894] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582520] Key type dns_resolver registered [ 1.587018] ThumbEE CPU extension supported. [ 1.591286] Registering SWP/SWPB emulation handler [ 1.598543] +3.3V_RUN: supplied by +3.3V_SYS [ 1.603490] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.609271] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.614097] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.618931] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.624426] +VDD_LED: supplied by +VDD_MUX [ 1.629107] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.634139] +5V_USB_HS: supplied by +5V_SYS [ 1.638830] +5V_USB_SS: supplied by +5V_SYS [ 1.644128] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.649360] +3.3V_LP0: supplied by +3.3V_SYS [ 1.654363] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.660123] elan_i2c 1-0015: failed to read report data: -121 [ 1.660339] +5V_HDMI_CON: supplied by +5V_SYS [ 1.661345] usb3-0 supply vbus not found, using dummy regulator [ 1.661410] usb3-1 supply vbus not found, using dummy regulator [ 1.683284] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.690089] panel supply power not found, using dummy regulator [ 1.697584] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.703325] mmc1: Unknown controller version (3). You may experience problems. [ 1.710786] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.717295] +1.8V_VDDIO: voltage operation not allowed [ 1.722483] mmc1: Switching to 3.3V signalling voltage failed [ 1.729285] mmc0: new high speed MMC card at address 0001 [ 1.735312] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.740425] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.746837] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.753220] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.758178] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.759177] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.759187] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.759224] mmc2: Unknown controller version (3). You may experience problems. [ 1.759364] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.791964] elan_i2c 1-0015: invalid report id data (ff) [ 1.795845] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.801433] mmc1: new high speed SDIO card at address 0001 [ 1.813352] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.913667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.920283] [drm] No driver support for vblank timestamp query. [ 1.964999] mmc2: new high speed SDHC card at address 0007 [ 1.965554] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 1.974317] GPT:Primary header alternate_lba != Alt. header my_lba [ 1.974320] GPT:3014591 != 15564799 [ 1.974321] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 1.974322] GPT:3014591 != 15564799 [ 1.974323] GPT: Use GNU Parted to correct GPT errors. [ 1.974349] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.981615] Console: switching to colour frame buffer device 170x48 [ 2.033044] drm drm: fb0: frame buffer device [ 2.048160] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.055129] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.062404] as3722-rtc as3722-rtc: setting system clock to 2016-01-11 09:19:46 UTC (1452503986) [ 2.075096] +1.8V_RUN_CAM: disabling [ 2.078847] +3.3V_RUN_CAM: disabling [ 2.082571] +1.2V_RUN_CAM_FRONT: disabling [ 2.086807] +1.05V_RUN_CAM_REAR: disabling [ 2.091072] +2.8V_RUN_TOUCH: disabling [ 2.095051] +2.8V_RUN_CAM_AF: disabling [ 2.099062] +1.8V_RUN_VPP_FUSE: disabling [ 2.103248] +5V_VDD_TS_SW: disabling [ 2.106824] +5V_USB_HS: disabling [ 2.110154] +5V_USB_SS: disabling [ 2.114510] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.123060] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.537264] EXT4-fs (mmcblk0p3): recovery complete [ 2.542826] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.550957] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.558133] devtmpfs: mounted [ 2.561794] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.780364] PM: Syncing filesystems ... done. [ 5.790332] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.798529] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.807148] Suspending console(s) (use no_console_suspend to debug) [ 5.859745] PM: suspend of devices complete after 45.767 msecs [ 5.860706] PM: late suspend of devices complete after 0.951 msecs [ 5.861461] PM: noirq suspend of devices complete after 0.751 msecs [ 5.861463] Disabling non-boot CPUs ... [ 5.861714] IRQ17 no longer affine to CPU1 [ 5.861885] CPU1: shutdown [ 5.874159] CPU2: shutdown [ 5.898941] CPU3: shutdown [ 5.913523] Entering suspend state LP1 [ 5.913537] Enabling non-boot CPUs ... [ 5.938759] CPU1 is up [ 5.963771] CPU2 is up [ 5.988875] CPU3 is up [ 5.989371] PM: noirq resume of devices complete after 0.491 msecs [ 5.990836] PM: early resume of devices complete after 1.154 msecs [ 6.135187] +1.8V_VDDIO: voltage operation not allowed [ 6.135190] mmc1: Switching to 3.3V signalling voltage failed [ 6.195674] PM: resume of devices complete after 204.829 msecs [ 6.274310] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:31 1970 [ 6.627114] PM: Syncing filesystems ... done. [ 6.636613] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6.644823] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6.653472] Suspending console(s) (use no_console_suspend to debug) [ 6.709567] PM: suspend of devices complete after 49.286 msecs [ 6.710390] PM: late suspend of devices complete after 0.818 msecs [ 6.711046] PM: noirq suspend of devices complete after 0.653 msecs [ 6.711047] Disabling non-boot CPUs ... [ 6.711423] CPU1: shutdown [ 6.724086] CPU2: shutdown [ 6.748929] CPU3: shutdown [ 6.763495] Entering suspend state LP1 [ 6.763509] Enabling non-boot CPUs ... [ 6.783731] CPU1 is up [ 6.808752] CPU2 is up [ 6.833851] CPU3 is up [ 6.834350] PM: noirq resume of devices complete after 0.494 msecs [ 6.835672] PM: early resume of devices complete after 1.024 msecs [ 6.980085] +1.8V_VDDIO: voltage operation not allowed [ 6.980089] mmc1: Switching to 3.3V signalling voltage failed [ 7.047647] PM: resume of devices complete after 211.963 msecs [ 7.122629] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:35 1970 [ 7.482865] PM: Syncing filesystems ... done. [ 7.492281] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.500482] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.509118] Suspending console(s) (use no_console_suspend to debug) [ 7.569636] PM: suspend of devices complete after 53.699 msecs [ 7.570817] PM: late suspend of devices complete after 1.170 msecs [ 7.571565] PM: noirq suspend of devices complete after 0.743 msecs [ 7.571566] Disabling non-boot CPUs ... [ 7.571933] CPU1: shutdown [ 7.594069] CPU2: shutdown [ 7.608728] IRQ17 no longer affine to CPU3 [ 7.608916] CPU3: shutdown [ 7.633482] Entering suspend state LP1 [ 7.633496] Enabling non-boot CPUs ... [ 7.658706] CPU1 is up [ 7.683732] CPU2 is up [ 7.708822] CPU3 is up [ 7.709289] PM: noirq resume of devices complete after 0.463 msecs [ 7.710435] PM: early resume of devices complete after 0.856 msecs [ 7.855622] +1.8V_VDDIO: voltage operation not allowed [ 7.855625] mmc1: Switching to 3.3V signalling voltage failed [ 7.917386] PM: resume of devices complete after 206.939 msecs [ 7.996480] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 8.357890] PM: Syncing filesystems ... done. [ 8.367310] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.375553] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.384254] Suspending console(s) (use no_console_suspend to debug) [ 8.449678] PM: suspend of devices complete after 58.607 msecs [ 8.450815] PM: late suspend of devices complete after 1.127 msecs [ 8.451565] PM: noirq suspend of devices complete after 0.746 msecs [ 8.451567] Disabling non-boot CPUs ... [ 8.451934] CPU1: shutdown [ 8.464043] CPU2: shutdown [ 8.488886] CPU3: shutdown [ 8.503461] Entering suspend state LP1 [ 8.503475] Enabling non-boot CPUs ... [ 8.528679] CPU1 is up [ 8.553704] CPU2 is up [ 8.578808] CPU3 is up [ 8.579272] PM: noirq resume of devices complete after 0.459 msecs [ 8.580524] PM: early resume of devices complete after 0.941 msecs [ 8.725016] +1.8V_VDDIO: voltage operation not allowed [ 8.725020] mmc1: Switching to 3.3V signalling voltage failed [ 8.787518] PM: resume of devices complete after 206.983 msecs [ 8.862117] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 9.222696] PM: Syncing filesystems ... done. [ 9.232154] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.240348] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.249003] Suspending console(s) (use no_console_suspend to debug) [ 9.299586] PM: suspend of devices complete after 43.776 msecs [ 9.300728] PM: late suspend of devices complete after 1.132 msecs [ 9.301482] PM: noirq suspend of devices complete after 0.749 msecs [ 9.301484] Disabling non-boot CPUs ... [ 9.301854] CPU1: shutdown [ 9.328831] IRQ17 no longer affine to CPU2 [ 9.329022] CPU2: shutdown [ 9.353874] CPU3: shutdown [ 9.368428] Entering suspend state LP1 [ 9.368442] Enabling non-boot CPUs ... [ 9.393653] CPU1 is up [ 9.418684] CPU2 is up [ 9.443779] CPU3 is up [ 9.444237] PM: noirq resume of devices complete after 0.453 msecs [ 9.445287] PM: early resume of devices complete after 0.762 msecs [ 9.590206] +1.8V_VDDIO: voltage operation not allowed [ 9.590208] mmc1: Switching to 3.3V signalling voltage failed [ 9.652755] PM: resume of devices complete after 207.457 msecs [ 9.731829] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:47 1970 [ 10.087793] PM: Syncing filesystems ... done. [ 10.097344] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.105550] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.114264] Suspending console(s) (use no_console_suspend to debug) [ 10.164490] PM: suspend of devices complete after 43.423 msecs [ 10.165304] PM: late suspend of devices complete after 0.810 msecs [ 10.165963] PM: noirq suspend of devices complete after 0.655 msecs [ 10.165965] Disabling non-boot CPUs ... [ 10.166176] IRQ17 no longer affine to CPU1 [ 10.166346] CPU1: shutdown [ 10.189000] CPU2: shutdown [ 10.208838] CPU3: shutdown [ 10.223412] Entering suspend state LP1 [ 10.223426] Enabling non-boot CPUs ... [ 10.248634] CPU1 is up [ 10.273653] CPU2 is up [ 10.298753] CPU3 is up [ 10.299222] PM: noirq resume of devices complete after 0.465 msecs [ 10.300532] PM: early resume of devices complete after 0.997 msecs [ 10.444818] +1.8V_VDDIO: voltage operation not allowed [ 10.444821] mmc1: Switching to 3.3V signalling voltage failed [ 10.507114] PM: resume of devices complete after 206.571 msecs [ 10.585805] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:51 1970 [ 10.942541] PM: Syncing filesystems ... done. [ 10.952113] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.960306] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.969021] Suspending console(s) (use no_console_suspend to debug) [ 11.019455] PM: suspend of devices complete after 43.627 msecs [ 11.020276] PM: late suspend of devices complete after 0.816 msecs [ 11.020924] PM: noirq suspend of devices complete after 0.645 msecs [ 11.020926] Disabling non-boot CPUs ... [ 11.021139] IRQ17 no longer affine to CPU1 [ 11.021309] CPU1: shutdown [ 11.038962] CPU2: shutdown [ 11.063816] CPU3: shutdown [ 11.078395] Entering suspend state LP1 [ 11.078409] Enabling non-boot CPUs ... [ 11.103605] CPU1 is up [ 11.128629] CPU2 is up [ 11.153747] CPU3 is up [ 11.154216] PM: noirq resume of devices complete after 0.464 msecs [ 11.155581] PM: early resume of devices complete after 1.065 msecs [ 11.299940] +1.8V_VDDIO: voltage operation not allowed [ 11.299942] mmc1: Switching to 3.3V signalling voltage failed [ 11.362969] PM: resume of devices complete after 207.376 msecs [ 11.441597] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:55 1970 [ 11.797739] PM: Syncing filesystems ... done. [ 11.807311] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.815413] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.824128] Suspending console(s) (use no_console_suspend to debug) [ 11.874399] PM: suspend of devices complete after 43.464 msecs [ 11.875380] PM: late suspend of devices complete after 0.971 msecs [ 11.876134] PM: noirq suspend of devices complete after 0.750 msecs [ 11.876136] Disabling non-boot CPUs ... [ 11.876504] CPU1: shutdown [ 11.898769] IRQ17 no longer affine to CPU2 [ 11.898960] CPU2: shutdown [ 11.923796] CPU3: shutdown [ 11.938364] Entering suspend state LP1 [ 11.938377] Enabling non-boot CPUs ... [ 11.958589] CPU1 is up [ 11.983611] CPU2 is up [ 12.008720] CPU3 is up [ 12.009191] PM: noirq resume of devices complete after 0.466 msecs [ 12.010556] PM: early resume of devices complete after 1.034 msecs [ 12.155293] +1.8V_VDDIO: voltage operation not allowed [ 12.155297] mmc1: Switching to 3.3V signalling voltage failed [ 12.215220] PM: resume of devices complete after 204.653 msecs [ 12.293850] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 12.657728] PM: Syncing filesystems ... done. [ 12.667287] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.675499] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.684137] Suspending console(s) (use no_console_suspend to debug) [ 12.749360] PM: suspend of devices complete after 58.401 msecs [ 12.750291] PM: late suspend of devices complete after 0.921 msecs [ 12.751012] PM: noirq suspend of devices complete after 0.717 msecs [ 12.751014] Disabling non-boot CPUs ... [ 12.751391] CPU1: shutdown [ 12.763936] CPU2: shutdown [ 12.788815] CPU3: shutdown [ 12.803340] Entering suspend state LP1 [ 12.803353] Enabling non-boot CPUs ... [ 12.828567] CPU1 is up [ 12.853587] CPU2 is up [ 12.878691] CPU3 is up [ 12.879163] PM: noirq resume of devices complete after 0.468 msecs [ 12.880306] PM: early resume of devices complete after 0.840 msecs [ 13.024950] +1.8V_VDDIO: voltage operation not allowed [ 13.024954] mmc1: Switching to 3.3V signalling voltage failed [ 13.087604] PM: resume of devices complete after 207.287 msecs [ 13.162225] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 13.522441] PM: Syncing filesystems ... done. [ 13.531790] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.539974] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.548689] Suspending console(s) (use no_console_suspend to debug) [ 13.599566] PM: suspend of devices complete after 44.073 msecs [ 13.600527] PM: late suspend of devices complete after 0.951 msecs [ 13.601276] PM: noirq suspend of devices complete after 0.744 msecs [ 13.601277] Disabling non-boot CPUs ... [ 13.601647] CPU1: shutdown [ 13.623722] IRQ17 no longer affine to CPU2 [ 13.623915] CPU2: shutdown [ 13.643753] CPU3: shutdown [ 13.658323] Entering suspend state LP1 [ 13.658336] Enabling non-boot CPUs ... [ 13.683546] CPU1 is up [ 13.708569] CPU2 is up [ 13.733667] CPU3 is up [ 13.734137] PM: noirq resume of devices complete after 0.466 msecs [ 13.735300] PM: early resume of devices complete after 0.853 msecs [ 13.879904] +1.8V_VDDIO: voltage operation not allowed [ 13.879907] mmc1: Switching to 3.3V signalling voltage failed [ 13.942340] PM: resume of devices complete after 207.029 msecs [ 14.021025] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE