U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################ 2.8 MiB/s done Bytes transferred = 7076728 (6bfb78 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.7 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6bfb78 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc7-next-20160516-94924-gb0dc27a (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 23 11:58:58 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4216K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc106c518 (14738 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141dba0 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ca0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000017] Switching to timer-based delay loop, resolution 1000ns [ 0.001778] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001785] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001792] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001796] Switching to timer-based delay loop, resolution 83ns [ 0.001996] Console: colour dummy device 80x30 [ 0.002009] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002015] pid_max: default: 32768 minimum: 301 [ 0.002055] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002059] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002305] CPU: Testing write buffer coherency: ok [ 0.002417] /cpus/cpu@0 missing clock-frequency property [ 0.002431] /cpus/cpu@1 missing clock-frequency property [ 0.002445] /cpus/cpu@2 missing clock-frequency property [ 0.002459] /cpus/cpu@3 missing clock-frequency property [ 0.002464] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002474] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003723] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004319] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006954] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011947] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016677] Brought up 4 CPUs [ 0.016685] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016688] CPU: All CPU(s) started in SVC mode. [ 0.017228] devtmpfs: initialized [ 0.023635] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.023909] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024429] pinctrl core: initialized pinctrl subsystem [ 0.025097] NET: Registered protocol family 16 [ 0.025774] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036711] cpuidle: using governor menu [ 0.043277] No ATAGs? [ 0.043289] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043293] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045421] Serial: AMBA PL011 UART driver [ 0.046415] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.063477] +5V_SYS: supplied by +VDD_MUX [ 0.063587] +3.3V_SYS: supplied by +VDD_MUX [ 0.063822] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.063827] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.063859] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.063863] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.063893] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.063898] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.063927] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.063931] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.064013] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.064017] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.064046] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.064050] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.065194] vgaarb: loaded [ 0.065495] SCSI subsystem initialized [ 0.065565] libata version 3.00 loaded. [ 0.065674] usbcore: registered new interface driver usbfs [ 0.065700] usbcore: registered new interface driver hub [ 0.065726] usbcore: registered new device driver usb [ 0.067136] pps_core: LinuxPPS API ver. 1 registered [ 0.067139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.067147] PTP clock support registered [ 0.067219] EDAC MC: Ver: 3.0.0 [ 0.067650] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.067659] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.068140] clocksource: Switched to clocksource arch_sys_counter [ 0.071788] NET: Registered protocol family 2 [ 0.071984] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.072017] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.072080] TCP: Hash tables configured (established 8192 bind 8192) [ 0.072102] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.072115] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072176] NET: Registered protocol family 1 [ 0.072277] RPC: Registered named UNIX socket transport module. [ 0.072280] RPC: Registered udp transport module. [ 0.072283] RPC: Registered tcp transport module. [ 0.072286] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072289] PCI: CLS 0 bytes, default 64 [ 0.072736] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.073294] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.073576] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.077350] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.077649] NFS: Registering the id_resolver key type [ 0.077663] Key type id_resolver registered [ 0.077666] Key type id_legacy registered [ 0.077683] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.078160] bounce: pool size: 64 pages [ 0.078233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.078237] io scheduler noop registered [ 0.078240] io scheduler deadline registered [ 0.078251] io scheduler cfq registered (default) [ 0.080161] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.089089] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.089778] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.110218] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.111351] console [ttyS0] disabled [ 0.111368] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.965543] console [ttyS0] enabled [ 0.969363] SuperH (H)SCI(F) driver initialized [ 0.974252] msm_serial: driver initialized [ 0.978413] STMicroelectronics ASC driver initialized [ 0.984900] [drm] Initialized drm 1.1.0 20060810 [ 0.990920] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 0.997470] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.004685] panel supply power not found, using dummy regulator [ 1.014365] brd: module loaded [ 1.019477] loop: module loaded [ 1.023515] as3722 4-0040: AS3722 with revision 0x1 found [ 1.033253] as3722-sd2: supplied by +5V_SYS [ 1.037663] as3722-sd3: supplied by +5V_SYS [ 1.042013] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.048212] as3722-sd4: supplied by +5V_SYS [ 1.052540] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.058288] as3722-sd5: supplied by +5V_SYS [ 1.063875] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.069611] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.075631] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.081251] as3722-ldo3: supplied by +3.3V_SYS [ 1.085707] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.093288] as3722-ldo4: supplied by +3.3V_SYS [ 1.097876] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.103898] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.108667] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.115368] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.121405] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.126177] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.132732] as3722-ldo9: supplied by +5V_SYS [ 1.137297] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.143511] as3722-ldo10: supplied by +5V_SYS [ 1.148011] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.154458] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.172657] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.178913] libphy: Fixed MDIO Bus: probed [ 1.183244] CAN device driver interface [ 1.187776] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.194727] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.201456] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208863] usbcore: registered new interface driver pegasus [ 1.214532] usbcore: registered new interface driver asix [ 1.219935] usbcore: registered new interface driver ax88179_178a [ 1.226032] usbcore: registered new interface driver cdc_ether [ 1.231875] usbcore: registered new interface driver smsc75xx [ 1.237631] usbcore: registered new interface driver smsc95xx [ 1.243380] usbcore: registered new interface driver net1080 [ 1.249043] usbcore: registered new interface driver cdc_subset [ 1.254964] usbcore: registered new interface driver zaurus [ 1.260553] usbcore: registered new interface driver cdc_ncm [ 1.266922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.273439] ehci-pci: EHCI PCI platform driver [ 1.277885] ehci-platform: EHCI generic platform driver [ 1.283181] ehci-omap: OMAP-EHCI Host Controller driver [ 1.288448] ehci-orion: EHCI orion driver [ 1.292494] SPEAr-ehci: EHCI SPEAr driver [ 1.296548] ehci-st: EHCI STMicroelectronics driver [ 1.301468] ehci-exynos: EHCI EXYNOS driver [ 1.305701] ehci-atmel: EHCI Atmel driver [ 1.309754] tegra-ehci: Tegra EHCI driver [ 1.313821] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319995] ohci-pci: OHCI PCI platform driver [ 1.324446] ohci-platform: OHCI generic platform driver [ 1.329718] ohci-omap3: OHCI OMAP3 driver [ 1.333772] SPEAr-ohci: OHCI SPEAr driver [ 1.337820] ohci-st: OHCI STMicroelectronics driver [ 1.342740] ohci-atmel: OHCI Atmel driver [ 1.347005] usbcore: registered new interface driver usb-storage [ 1.353592] mousedev: PS/2 mouse device common for all mice [ 1.359629] 1-0015 supply vcc not found, using dummy regulator [ 1.361301] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.361304] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.363549] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.363572] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.363851] i2c /dev entries driver [ 1.367192] 0-004c supply vcc not found, using dummy regulator [ 1.376668] sdhci: Secure Digital Host Controller Interface driver [ 1.376670] sdhci: Copyright(c) Pierre Ossman [ 1.377419] Synopsys Designware Multimedia Card Interface Driver [ 1.377954] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.378345] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.378364] mmc0: Unknown controller version (3). You may experience problems. [ 1.378561] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.378570] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.378600] mmc0: Unknown controller version (3). You may experience problems. [ 1.378755] mmc0: Unknown controller version (3). You may experience problems. [ 1.378797] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.413152] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.413960] ledtrig-cpu: registered to indicate activity on CPUs [ 1.414194] usbcore: registered new interface driver usbhid [ 1.414195] usbhid: USB HID core driver [ 1.417089] NET: Registered protocol family 10 [ 1.417440] sit: IPv6 over IPv4 tunneling driver [ 1.417827] NET: Registered protocol family 17 [ 1.417835] can: controller area network core (rev 20120528 abi 9) [ 1.417872] NET: Registered protocol family 29 [ 1.417875] can: raw protocol (rev 20120528) [ 1.417878] can: broadcast manager protocol (rev 20120528 t) [ 1.417883] can: netlink gateway (rev 20130117) max_hops=1 [ 1.418089] Key type dns_resolver registered [ 1.422194] ThumbEE CPU extension supported. [ 1.422199] Registering SWP/SWPB emulation handler [ 1.423509] +3.3V_RUN: supplied by +3.3V_SYS [ 1.423814] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.423859] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.423909] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.423949] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.424141] +VDD_LED: supplied by +VDD_MUX [ 1.424404] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.424663] +5V_USB_HS: supplied by +5V_SYS [ 1.424919] +5V_USB_SS: supplied by +5V_SYS [ 1.425550] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.426173] +3.3V_LP0: supplied by +3.3V_SYS [ 1.426679] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.426935] +5V_HDMI_CON: supplied by +5V_SYS [ 1.427971] usb3-0 supply vbus not found, using dummy regulator [ 1.428038] usb3-1 supply vbus not found, using dummy regulator [ 1.432937] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.433733] panel supply power not found, using dummy regulator [ 1.434693] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.434714] mmc1: Unknown controller version (3). You may experience problems. [ 1.435117] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.435319] +1.8V_VDDIO: voltage operation not allowed [ 1.435321] mmc1: Switching to 3.3V signalling voltage failed [ 1.463271] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.464253] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.464262] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.464300] mmc2: Unknown controller version (3). You may experience problems. [ 1.464444] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.471609] mmc0: new MMC card at address 0001 [ 1.472110] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.472397] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.472746] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.473016] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.492600] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.498548] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.518028] mmc1: new high speed SDIO card at address 0001 [ 1.591365] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.591367] [drm] No driver support for vblank timestamp query. [ 1.650227] mmc2: new high speed SDHC card at address 0007 [ 1.650723] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 1.659350] GPT:Primary header alternate_lba != Alt. header my_lba [ 1.659354] GPT:3014591 != 15564799 [ 1.659356] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 1.659358] GPT:3014591 != 15564799 [ 1.659359] GPT: Use GNU Parted to correct GPT errors. [ 1.659389] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.829800] Console: switching to colour frame buffer device 170x48 [ 1.839843] drm drm: fb0: frame buffer device [ 1.858235] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.864963] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.872100] as3722-rtc as3722-rtc: setting system clock to 2016-01-11 09:00:49 UTC (1452502849) [ 1.884768] +1.8V_RUN_CAM: disabling [ 1.888566] +3.3V_RUN_CAM: disabling [ 1.892318] +1.2V_RUN_CAM_FRONT: disabling [ 1.896610] +1.05V_RUN_CAM_REAR: disabling [ 1.900942] +2.8V_RUN_TOUCH: disabling [ 1.904868] +2.8V_RUN_CAM_AF: disabling [ 1.908875] +1.8V_RUN_VPP_FUSE: disabling [ 1.913039] +5V_VDD_TS_SW: disabling [ 1.916632] +5V_USB_HS: disabling [ 1.919957] +5V_USB_SS: disabling [ 1.936262] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input1 [ 1.945850] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.954846] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.444466] EXT4-fs (mmcblk0p3): recovery complete [ 2.451444] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.459577] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.469310] devtmpfs: mounted [ 2.472980] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.854073] PM: Syncing filesystems ... done. [ 5.864111] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.872281] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.880909] Suspending console(s) (use no_console_suspend to debug) [ 5.939672] PM: suspend of devices complete after 51.943 msecs [ 5.940927] PM: late suspend of devices complete after 1.246 msecs [ 5.941677] PM: noirq suspend of devices complete after 0.746 msecs [ 5.941679] Disabling non-boot CPUs ... [ 5.942084] CPU1: shutdown [ 5.958971] IRQ17 no longer affine to CPU2 [ 5.959158] CPU2: shutdown [ 5.984049] CPU3: shutdown [ 5.998575] Entering suspend state LP1 [ 5.998589] Enabling non-boot CPUs ... [ 6.023816] CPU1 is up [ 6.048837] CPU2 is up [ 6.073941] CPU3 is up [ 6.074408] PM: noirq resume of devices complete after 0.461 msecs [ 6.075550] PM: early resume of devices complete after 0.815 msecs [ 6.220128] +1.8V_VDDIO: voltage operation not allowed [ 6.220132] mmc1: Switching to 3.3V signalling voltage failed [ 6.280594] PM: resume of devices complete after 205.034 msecs [ 6.359223] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:31 1970 [ 6.760457] PM: Syncing filesystems ... done. [ 6.770131] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6.778231] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6.786832] Suspending console(s) (use no_console_suspend to debug) [ 6.849587] PM: suspend of devices complete after 55.923 msecs [ 6.850838] PM: late suspend of devices complete after 1.242 msecs [ 6.851587] PM: noirq suspend of devices complete after 0.745 msecs [ 6.851589] Disabling non-boot CPUs ... [ 6.851953] CPU1: shutdown [ 6.869155] CPU2: shutdown [ 6.894007] CPU3: shutdown [ 6.908567] Entering suspend state LP1 [ 6.908581] Enabling non-boot CPUs ... [ 6.933792] CPU1 is up [ 6.958814] CPU2 is up [ 6.983922] CPU3 is up [ 6.984393] PM: noirq resume of devices complete after 0.467 msecs [ 6.985883] PM: early resume of devices complete after 1.183 msecs [ 7.130107] +1.8V_VDDIO: voltage operation not allowed [ 7.130112] mmc1: Switching to 3.3V signalling voltage failed [ 7.192675] PM: resume of devices complete after 206.780 msecs [ 7.267261] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:35 1970 [ 7.670474] PM: Syncing filesystems ... done. [ 7.680206] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.688425] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.697021] Suspending console(s) (use no_console_suspend to debug) [ 7.754707] PM: suspend of devices complete after 50.858 msecs [ 7.755841] PM: late suspend of devices complete after 1.125 msecs [ 7.756592] PM: noirq suspend of devices complete after 0.747 msecs [ 7.756594] Disabling non-boot CPUs ... [ 7.756961] CPU1: shutdown [ 7.769126] CPU2: shutdown [ 7.793785] IRQ17 no longer affine to CPU3 [ 7.793973] CPU3: shutdown [ 7.808543] Entering suspend state LP1 [ 7.808557] Enabling non-boot CPUs ... [ 7.833777] CPU1 is up [ 7.858792] CPU2 is up [ 7.883897] CPU3 is up [ 7.884367] PM: noirq resume of devices complete after 0.466 msecs [ 7.885787] PM: early resume of devices complete after 1.120 msecs [ 8.030018] +1.8V_VDDIO: voltage operation not allowed [ 8.030021] mmc1: Switching to 3.3V signalling voltage failed [ 8.092165] PM: resume of devices complete after 206.367 msecs [ 8.170824] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 8.575340] PM: Syncing filesystems ... done. [ 8.584933] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.593148] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.601789] Suspending console(s) (use no_console_suspend to debug) [ 8.654607] PM: suspend of devices complete after 46.000 msecs [ 8.655575] PM: late suspend of devices complete after 0.959 msecs [ 8.656333] PM: noirq suspend of devices complete after 0.754 msecs [ 8.656335] Disabling non-boot CPUs ... [ 8.656530] IRQ17 no longer affine to CPU1 [ 8.656706] CPU1: shutdown [ 8.689111] CPU2: shutdown [ 8.703950] CPU3: shutdown [ 8.718525] Entering suspend state LP1 [ 8.718539] Enabling non-boot CPUs ... [ 8.743753] CPU1 is up [ 8.768764] CPU2 is up [ 8.793868] CPU3 is up [ 8.794360] PM: noirq resume of devices complete after 0.488 msecs [ 8.795737] PM: early resume of devices complete after 1.060 msecs [ 8.940052] +1.8V_VDDIO: voltage operation not allowed [ 8.940055] mmc1: Switching to 3.3V signalling voltage failed [ 9.002477] PM: resume of devices complete after 206.729 msecs [ 9.081146] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 9.485419] PM: Syncing filesystems ... done. [ 9.495184] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.503375] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.512057] Suspending console(s) (use no_console_suspend to debug) [ 9.564496] PM: suspend of devices complete after 45.565 msecs [ 9.565577] PM: late suspend of devices complete after 1.072 msecs [ 9.566326] PM: noirq suspend of devices complete after 0.745 msecs [ 9.566328] Disabling non-boot CPUs ... [ 9.566693] CPU1: shutdown [ 9.579069] CPU2: shutdown [ 9.593800] IRQ17 no longer affine to CPU3 [ 9.593981] CPU3: shutdown [ 9.608493] Entering suspend state LP1 [ 9.608507] Enabling non-boot CPUs ... [ 9.633728] CPU1 is up [ 9.658745] CPU2 is up [ 9.683849] CPU3 is up [ 9.684319] PM: noirq resume of devices complete after 0.465 msecs [ 9.685499] PM: early resume of devices complete after 0.879 msecs [ 9.829849] +1.8V_VDDIO: voltage operation not allowed [ 9.829853] mmc1: Switching to 3.3V signalling voltage failed [ 9.891764] PM: resume of devices complete after 206.252 msecs [ 9.970434] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:47 1970 [ 10.375315] PM: Syncing filesystems ... done. [ 10.384886] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.393068] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.401710] Suspending console(s) (use no_console_suspend to debug) [ 10.454740] PM: suspend of devices complete after 46.213 msecs [ 10.455860] PM: late suspend of devices complete after 1.110 msecs [ 10.456612] PM: noirq suspend of devices complete after 0.748 msecs [ 10.456614] Disabling non-boot CPUs ... [ 10.456986] CPU1: shutdown [ 10.469060] CPU2: shutdown [ 10.493909] CPU3: shutdown [ 10.508477] Entering suspend state LP1 [ 10.508491] Enabling non-boot CPUs ... [ 10.533705] CPU1 is up [ 10.558721] CPU2 is up [ 10.583827] CPU3 is up [ 10.584297] PM: noirq resume of devices complete after 0.466 msecs [ 10.585467] PM: early resume of devices complete after 0.868 msecs [ 10.730004] +1.8V_VDDIO: voltage operation not allowed [ 10.730007] mmc1: Switching to 3.3V signalling voltage failed [ 10.792259] PM: resume of devices complete after 206.779 msecs [ 10.866847] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:51 1970 [ 11.275379] PM: Syncing filesystems ... done. [ 11.284969] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.293162] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.301848] Suspending console(s) (use no_console_suspend to debug) [ 11.354702] PM: suspend of devices complete after 46.039 msecs [ 11.355831] PM: late suspend of devices complete after 1.119 msecs [ 11.356583] PM: noirq suspend of devices complete after 0.747 msecs [ 11.356584] Disabling non-boot CPUs ... [ 11.356780] IRQ17 no longer affine to CPU1 [ 11.356954] CPU1: shutdown [ 11.379030] CPU2: shutdown [ 11.403911] CPU3: shutdown [ 11.418445] Entering suspend state LP1 [ 11.418459] Enabling non-boot CPUs ... [ 11.443679] CPU1 is up [ 11.468703] CPU2 is up [ 11.493806] CPU3 is up [ 11.494272] PM: noirq resume of devices complete after 0.461 msecs [ 11.495648] PM: early resume of devices complete after 1.081 msecs [ 11.639944] +1.8V_VDDIO: voltage operation not allowed [ 11.639946] mmc1: Switching to 3.3V signalling voltage failed [ 11.702788] PM: resume of devices complete after 207.130 msecs [ 11.781460] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:55 1970 [ 12.185298] PM: Syncing filesystems ... done. [ 12.194952] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.203154] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.211814] Suspending console(s) (use no_console_suspend to debug) [ 12.269541] PM: suspend of devices complete after 50.909 msecs [ 12.270543] PM: late suspend of devices complete after 0.993 msecs [ 12.271284] PM: noirq suspend of devices complete after 0.737 msecs [ 12.271286] Disabling non-boot CPUs ... [ 12.271650] CPU1: shutdown [ 12.289013] CPU2: shutdown [ 12.318868] CPU3: shutdown [ 12.333434] Entering suspend state LP1 [ 12.333448] Enabling non-boot CPUs ... [ 12.358659] CPU1 is up [ 12.383680] CPU2 is up [ 12.408785] CPU3 is up [ 12.409259] PM: noirq resume of devices complete after 0.469 msecs [ 12.410629] PM: early resume of devices complete after 1.068 msecs [ 12.554788] +1.8V_VDDIO: voltage operation not allowed [ 12.554790] mmc1: Switching to 3.3V signalling voltage failed [ 12.618071] PM: resume of devices complete after 207.431 msecs [ 12.692619] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 13.100337] PM: Syncing filesystems ... done. [ 13.109961] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.118150] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.126833] Suspending console(s) (use no_console_suspend to debug) [ 13.179513] PM: suspend of devices complete after 45.865 msecs [ 13.180418] PM: late suspend of devices complete after 0.897 msecs [ 13.181141] PM: noirq suspend of devices complete after 0.719 msecs [ 13.181143] Disabling non-boot CPUs ... [ 13.181511] CPU1: shutdown [ 13.203982] CPU2: shutdown [ 13.228872] CPU3: shutdown [ 13.243401] Entering suspend state LP1 [ 13.243415] Enabling non-boot CPUs ... [ 13.268634] CPU1 is up [ 13.293654] CPU2 is up [ 13.318760] CPU3 is up [ 13.319227] PM: noirq resume of devices complete after 0.462 msecs [ 13.320501] PM: early resume of devices complete after 0.963 msecs [ 13.464936] +1.8V_VDDIO: voltage operation not allowed [ 13.464940] mmc1: Switching to 3.3V signalling voltage failed [ 13.527348] PM: resume of devices complete after 206.836 msecs [ 13.601947] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 14.010328] PM: Syncing filesystems ... done. [ 14.019951] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.028143] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.036831] Suspending console(s) (use no_console_suspend to debug) [ 14.089632] PM: suspend of devices complete after 45.984 msecs [ 14.090546] PM: late suspend of devices complete after 0.904 msecs [ 14.091268] PM: noirq suspend of devices complete after 0.718 msecs [ 14.091270] Disabling non-boot CPUs ... [ 14.091634] CPU1: shutdown [ 14.103973] CPU2: shutdown [ 14.128837] CPU3: shutdown [ 14.143385] Entering suspend state LP1 [ 14.143399] Enabling non-boot CPUs ... [ 14.168612] CPU1 is up [ 14.193630] CPU2 is up [ 14.218732] CPU3 is up [ 14.219198] PM: noirq resume of devices complete after 0.461 msecs [ 14.220587] PM: early resume of devices complete after 1.075 msecs [ 14.364872] +1.8V_VDDIO: voltage operation not allowed [ 14.364875] mmc1: Switching to 3.3V signalling voltage failed [ 14.428111] PM: resume of devices complete after 207.512 msecs [ 14.502665] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE