U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################ 3.9 MiB/s done Bytes transferred = 7076736 (6bfb80 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 4 MiB/s done Bytes transferred = 66737 (104b1 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6bfb80 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830134b0 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc7-next-20160516-94924-gb0dc27a (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 16 02:58:48 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994996K/2096128K available (9529K kernel code, 1142K rwdata, 4216K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc106c518 (14738 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141dba0 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ca0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000030] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000044] Switching to timer-based delay loop, resolution 1000ns [ 0.005282] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005300] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005318] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005330] Switching to timer-based delay loop, resolution 83ns [ 0.005833] Console: colour dummy device 80x30 [ 0.005858] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.005873] pid_max: default: 32768 minimum: 301 [ 0.005969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005980] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006573] CPU: Testing write buffer coherency: ok [ 0.006794] /cpus/cpu@0 missing clock-frequency property [ 0.006837] /cpus/cpu@1 missing clock-frequency property [ 0.006879] /cpus/cpu@2 missing clock-frequency property [ 0.006922] /cpus/cpu@3 missing clock-frequency property [ 0.006934] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006955] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.010528] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.011973] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015666] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.020664] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025117] Brought up 4 CPUs [ 0.025136] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.025143] CPU: All CPU(s) started in SVC mode. [ 0.026616] devtmpfs: initialized [ 0.045432] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.046131] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.047477] pinctrl core: initialized pinctrl subsystem [ 0.049146] NET: Registered protocol family 16 [ 0.051102] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.065247] cpuidle: using governor menu [ 0.085187] No ATAGs? [ 0.085213] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.085223] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.091601] Serial: AMBA PL011 UART driver [ 0.125546] +5V_SYS: supplied by +VDD_MUX [ 0.125868] +3.3V_SYS: supplied by +VDD_MUX [ 0.126556] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.126572] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.126664] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.126677] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.126846] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.126859] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.126948] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.126960] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.127048] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.127060] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.127146] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.127157] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.130577] vgaarb: loaded [ 0.131433] SCSI subsystem initialized [ 0.131599] libata version 3.00 loaded. [ 0.131902] usbcore: registered new interface driver usbfs [ 0.131980] usbcore: registered new interface driver hub [ 0.132046] usbcore: registered new device driver usb [ 0.135871] pps_core: LinuxPPS API ver. 1 registered [ 0.135881] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.135904] PTP clock support registered [ 0.136107] EDAC MC: Ver: 3.0.0 [ 0.139261] clocksource: Switched to clocksource arch_sys_counter [ 0.150362] NET: Registered protocol family 2 [ 0.150878] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.150976] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.151162] TCP: Hash tables configured (established 8192 bind 8192) [ 0.151213] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.151254] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.151410] NET: Registered protocol family 1 [ 0.151644] RPC: Registered named UNIX socket transport module. [ 0.151652] RPC: Registered udp transport module. [ 0.151660] RPC: Registered tcp transport module. [ 0.151666] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.151677] PCI: CLS 0 bytes, default 64 [ 0.152870] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.154396] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.155102] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.166391] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.167238] NFS: Registering the id_resolver key type [ 0.167268] Key type id_resolver registered [ 0.167276] Key type id_legacy registered [ 0.167319] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.168578] bounce: pool size: 64 pages [ 0.168783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.168793] io scheduler noop registered [ 0.168801] io scheduler deadline registered [ 0.168836] io scheduler cfq registered (default) [ 0.174644] usb2-0 supply vbus not found, using dummy regulator [ 0.174769] usb2-1 supply vbus not found, using dummy regulator [ 0.175169] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.191846] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.191899] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.199321] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.201362] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.264215] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.267200] console [ttyS0] disabled [ 0.267235] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 333, base_baud = 25500000) is a Tegra [ 1.119171] console [ttyS0] enabled [ 1.123617] SuperH (H)SCI(F) driver initialized [ 1.129262] msm_serial: driver initialized [ 1.133557] STMicroelectronics ASC driver initialized [ 1.139573] serial-tegra serial@70006000: failed to get alias id, errno -19 [ 1.146600] serial-tegra serial@70006040: failed to get alias id, errno -19 [ 1.156716] [drm] Initialized drm 1.1.0 20060810 [ 1.164841] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.184354] brd: module loaded [ 1.193343] loop: module loaded [ 1.196959] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.205289] as3722 4-0040: AS3722 with revision 0x1 found [ 1.216473] as3722-sd2: supplied by +5V_SYS [ 1.221132] as3722-sd3: supplied by +5V_SYS [ 1.225556] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.231938] as3722-sd4: supplied by +5V_SYS [ 1.236583] as3722-sd5: supplied by +5V_SYS [ 1.242657] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.248743] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.254998] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.260939] as3722-ldo3: supplied by +3.3V_SYS [ 1.265439] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.273249] as3722-ldo4: supplied by +3.3V_SYS [ 1.277919] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.284170] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.289015] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.295993] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.301664] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.307854] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.320128] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.341955] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.350518] libphy: Fixed MDIO Bus: probed [ 1.355311] CAN device driver interface [ 1.361317] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.368284] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.377391] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.384847] usbcore: registered new interface driver pegasus [ 1.390571] usbcore: registered new interface driver asix [ 1.396021] usbcore: registered new interface driver ax88179_178a [ 1.402166] usbcore: registered new interface driver cdc_ether [ 1.408064] usbcore: registered new interface driver smsc75xx [ 1.413877] usbcore: registered new interface driver smsc95xx [ 1.419670] usbcore: registered new interface driver net1080 [ 1.425378] usbcore: registered new interface driver cdc_subset [ 1.431344] usbcore: registered new interface driver zaurus [ 1.437002] usbcore: registered new interface driver cdc_ncm [ 1.442926] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.450608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.457143] ehci-pci: EHCI PCI platform driver [ 1.461639] ehci-platform: EHCI generic platform driver [ 1.467100] ehci-omap: OMAP-EHCI Host Controller driver [ 1.472487] ehci-orion: EHCI orion driver [ 1.476658] SPEAr-ehci: EHCI SPEAr driver [ 1.480836] ehci-st: EHCI STMicroelectronics driver [ 1.485879] ehci-exynos: EHCI EXYNOS driver [ 1.490246] ehci-atmel: EHCI Atmel driver [ 1.494420] tegra-ehci: Tegra EHCI driver [ 1.498671] ------------[ cut here ]------------ [ 1.503310] WARNING: CPU: 1 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1bc/0x228 [ 1.512179] Modules linked in: [ 1.515258] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc7-next-20160516-94924-gb0dc27a #1 [ 1.523940] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 1.530218] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 1.537959] [] (show_stack) from [] (dump_stack+0x84/0xa4) [ 1.545178] [] (dump_stack) from [] (__warn+0xd4/0x100) [ 1.552136] [] (__warn) from [] (warn_slowpath_null+0x20/0x28) [ 1.559699] [] (warn_slowpath_null) from [] (__of_reset_control_get+0x1bc/0x228) [ 1.568825] [] (__of_reset_control_get) from [] (tegra_ehci_probe+0x2d0/0x51c) [ 1.577780] [] (tegra_ehci_probe) from [] (platform_drv_probe+0x50/0xb0) [ 1.586214] [] (platform_drv_probe) from [] (driver_probe_device+0x1f4/0x2b0) [ 1.595077] [] (driver_probe_device) from [] (__driver_attach+0xac/0xb0) [ 1.603507] [] (__driver_attach) from [] (bus_for_each_dev+0x54/0x88) [ 1.611678] [] (bus_for_each_dev) from [] (bus_add_driver+0xe8/0x1f4) [ 1.619848] [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [ 1.627844] [] (driver_register) from [] (do_one_initcall+0x3c/0x16c) [ 1.636016] [] (do_one_initcall) from [] (kernel_init_freeable+0x120/0x1ec) [ 1.644711] [] (kernel_init_freeable) from [] (kernel_init+0x8/0x118) [ 1.652884] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 1.660465] ---[ end trace 73f7145c01400f30 ]--- [ 1.665092] tegra-ehci 7d004000.usb: can't get utmi-pads reset from the PHY [ 1.672057] tegra-ehci 7d004000.usb: continuing, but please update your DT [ 1.679038] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.684467] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.692213] tegra-ehci 7d004000.usb: irq 352, io mem 0x7d004000 [ 1.704282] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.711041] hub 1-0:1.0: USB hub found [ 1.714840] hub 1-0:1.0: 1 port detected [ 1.719409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.725607] ohci-pci: OHCI PCI platform driver [ 1.730110] ohci-platform: OHCI generic platform driver [ 1.735529] ohci-omap3: OHCI OMAP3 driver [ 1.739701] SPEAr-ohci: OHCI SPEAr driver [ 1.743860] ohci-st: OHCI STMicroelectronics driver [ 1.748904] ohci-atmel: OHCI Atmel driver [ 1.753761] usbcore: registered new interface driver usb-storage [ 1.761535] mousedev: PS/2 mouse device common for all mice [ 1.770754] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.777642] as3722-rtc as3722-rtc: RTC interrupt 375 [ 1.786008] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.793194] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.799987] i2c /dev entries driver [ 1.810549] 0-004c supply vcc not found, using dummy regulator [ 1.826184] sdhci: Secure Digital Host Controller Interface driver [ 1.832378] sdhci: Copyright(c) Pierre Ossman [ 1.838440] Synopsys Designware Multimedia Card Interface Driver [ 1.845661] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.852148] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.857055] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.861994] mmc0: Unknown controller version (3). You may experience problems. [ 1.869497] mmc0: Unknown controller version (3). You may experience problems. [ 1.876786] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.914284] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.924020] ledtrig-cpu: registered to indicate activity on CPUs [ 1.930535] usbcore: registered new interface driver usbhid [ 1.936116] usbhid: USB HID core driver [ 1.944528] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.956181] NET: Registered protocol family 10 [ 1.961331] sit: IPv6 over IPv4 tunneling driver [ 1.966645] NET: Registered protocol family 17 [ 1.971132] can: controller area network core (rev 20120528 abi 9) [ 1.977393] NET: Registered protocol family 29 [ 1.981861] can: raw protocol (rev 20120528) [ 1.986147] can: broadcast manager protocol (rev 20120528 t) [ 1.991826] can: netlink gateway (rev 20130117) max_hops=1 [ 1.997717] Key type dns_resolver registered [ 2.002642] ThumbEE CPU extension supported. [ 2.006940] Registering SWP/SWPB emulation handler [ 2.015940] +3.3V_RUN: supplied by +3.3V_SYS [ 2.021608] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.027906] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.033044] +5V_USB_HS: supplied by +5V_SYS [ 2.038857] +3.3V_LP0: supplied by +3.3V_SYS [ 2.045154] +5V_HDMI_CON: supplied by +5V_SYS [ 2.050242] +5V_SATA: supplied by +5V_SYS [ 2.054776] +12V_SATA: supplied by +VDD_MUX [ 2.061102] usb2-0 supply vbus not found, using dummy regulator [ 2.062116] mmc0: new MMC card at address 0001 [ 2.063273] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.064473] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.065578] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.066343] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.071760] mmcblk0: p1 [ 2.096610] usb2-1 supply vbus not found, using dummy regulator [ 2.102986] usb3-0 supply vbus not found, using dummy regulator [ 2.110300] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.116940] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 2.126803] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.137699] as3722-sd2: supplied by +5V_SYS [ 2.142368] as3722-sd3: supplied by +5V_SYS [ 2.146962] as3722-sd4: supplied by +5V_SYS [ 2.151513] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.157351] as3722-sd5: supplied by +5V_SYS [ 2.163349] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.169460] as3722-ldo1: supplied by +3.3V_RUN [ 2.174327] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.179951] as3722-ldo3: supplied by +3.3V_SYS [ 2.185311] as3722-ldo4: supplied by +3.3V_SYS [ 2.190035] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.194928] as3722-ldo6: supplied by +3.3V_RUN [ 2.199659] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.205026] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.212122] as3722-ldo9: supplied by +5V_SYS [ 2.217614] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.224204] as3722-ldo10: supplied by +5V_SYS [ 2.229117] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.235785] as3722-ldo11: supplied by +3.3V_RUN [ 2.240849] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.250862] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.259938] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.270813] scsi host0: tegra-ahci [ 2.275436] scsi host1: tegra-ahci [ 2.279181] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343 [ 2.287218] ata2: DUMMY [ 2.292393] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.297832] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.305687] tegra-ehci 7d008000.usb: irq 353, io mem 0x7d008000 [ 2.319296] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.326408] hub 2-0:1.0: USB hub found [ 2.330270] hub 2-0:1.0: 1 port detected [ 2.336780] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.341740] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.346744] mmc1: Unknown controller version (3). You may experience problems. [ 2.354394] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.394814] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 2.407337] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.416012] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 2.424392] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 2.448835] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 2.458069] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 2.472168] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.479431] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.485624] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.492540] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.499883] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.505444] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.511611] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.518579] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.524758] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.531756] PCI: bus0: Fast back to back transfers disabled [ 2.537370] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.545426] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.553726] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 2.559826] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.566871] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.579412] PCI: bus1: Fast back to back transfers disabled [ 2.585037] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.591943] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 2.598019] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.603667] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.607986] ata1: SATA link down (SStatus 0 SControl 300) [ 2.615964] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.623387] pci 0000:02:00.0: supports D1 D2 [ 2.627698] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.644407] PCI: bus2: Fast back to back transfers disabled [ 2.650012] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.656808] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 2.663643] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 2.670482] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.678272] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.684419] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 2.691800] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.696819] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 2.703672] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.711482] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 2.718858] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.725006] pci 0000:00:02.0: PCI bridge to [bus 02] [ 2.730018] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.736162] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 2.742999] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.750827] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.757958] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 2.764399] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.771404] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.777982] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 2.784917] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.792041] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 2.798464] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.805467] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.812044] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.819212] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.824853] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 2.841067] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a52000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 393 [ 2.850784] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.863386] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.870047] [drm] No driver support for vblank timestamp query. [ 2.877944] mmc1: new high speed SDHC card at address aaaa [ 2.884495] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 2.899855] mmcblk1: p1 p2 p3 [ 2.997566] tegra-hdmi 54280000.hdmi: cannot set audio to 44100 at 297000000 pclk [ 3.167346] Console: switching to colour frame buffer device 512x135 [ 3.262690] drm drm: fb0: frame buffer device [ 3.279401] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.286674] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 3.294723] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.302050] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.310645] cpu cpu1: cpufreq_init: failed to get clk: -2 [ 3.316125] cpu cpu2: cpufreq_init: failed to get clk: -2 [ 3.321598] cpu cpu3: cpufreq_init: failed to get clk: -2 [ 3.328031] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.335679] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:12 UTC (946684812) [ 3.350225] +USB0_VBUS_SW: disabling [ 3.353806] +1.8V_RUN_CAM: disabling [ 3.357759] +2.8V_RUN_CAM: disabling [ 3.361725] +1.2V_RUN_CAM_FRONT: disabling [ 3.366055] +1.05V_RUN_CAM_REAR: disabling [ 3.370372] +3.3V_RUN_TOUCH: disabling [ 3.374323] +2.8V_RUN_CAM_AF: disabling [ 3.378350] +1.8V_RUN_VPP_FUSE: disabling [ 3.385104] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.591721] EXT4-fs (mmcblk0p1): recovery complete [ 3.599395] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.607684] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.650002] devtmpfs: mounted [ 3.658515] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#