U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 3.4 MiB/s done Bytes transferred = 6544920 (63de18 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 2.9 MiB/s done Bytes transferred = 51467 (c90b hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x63de18 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffff90a ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.3.0-next-20151109-54255-g53e81f2 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Nov 10 04:03:07 PST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0fc43c0, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 12 pages/cpu @eef93000 s19136 r8192 d21824 u49152 [ 0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998504K/2096128K available (8243K kernel code, 1040K rwdata, 3740K rodata, 1044K init, 341K bss, 32088K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0dbce84 (11988 kB) [ 0.000000] .init : 0xc0dbd000 - 0xc0ec2000 (1044 kB) [ 0.000000] .data : 0xc0ec2000 - 0xc0fc6320 (1041 kB) [ 0.000000] .bss : 0xc0fc9000 - 0xc101e468 ( 342 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000015] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000034] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000043] Switching to timer-based delay loop, resolution 1000ns [ 0.002503] Console: colour dummy device 80x30 [ 0.002528] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000) [ 0.002537] pid_max: default: 32768 minimum: 301 [ 0.002623] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002631] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003050] CPU: Testing write buffer coherency: ok [ 0.003343] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003420] Setting up static identity map for 0x80209000 - 0x80209098 [ 0.005695] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.006901] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007540] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008175] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.008213] Brought up 4 CPUs [ 0.008226] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.008230] CPU: All CPU(s) started in SVC mode. [ 0.008806] devtmpfs: initialized [ 0.017065] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.017743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.021220] pinctrl core: initialized pinctrl subsystem [ 0.022749] NET: Registered protocol family 16 [ 0.025223] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.039934] cpuidle: using governor ladder [ 0.054928] cpuidle: using governor menu [ 0.063081] No ATAGs? [ 0.063114] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.063120] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.065889] Serial: AMBA PL011 UART driver [ 0.066980] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.087936] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.088005] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.088113] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.088164] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.088270] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.088319] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.088473] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.088523] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.090591] vgaarb: loaded [ 0.091162] SCSI subsystem initialized [ 0.091279] libata version 3.00 loaded. [ 0.091463] usbcore: registered new interface driver usbfs [ 0.091500] usbcore: registered new interface driver hub [ 0.091538] usbcore: registered new device driver usb [ 0.146727] pps_core: LinuxPPS API ver. 1 registered [ 0.146735] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.146751] PTP clock support registered [ 0.146901] EDAC MC: Ver: 3.0.0 [ 0.148429] clocksource: Switched to clocksource timer_us [ 0.154457] NET: Registered protocol family 2 [ 0.154849] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.154902] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.154984] TCP: Hash tables configured (established 8192 bind 8192) [ 0.155081] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.155139] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.155314] NET: Registered protocol family 1 [ 0.155582] RPC: Registered named UNIX socket transport module. [ 0.155589] RPC: Registered udp transport module. [ 0.155594] RPC: Registered tcp transport module. [ 0.155598] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.155615] PCI: CLS 0 bytes, default 64 [ 0.156365] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.157311] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.163379] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.163904] NFS: Registering the id_resolver key type [ 0.163946] Key type id_resolver registered [ 0.163951] Key type id_legacy registered [ 0.163993] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.164804] bounce: pool size: 64 pages [ 0.164928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.164941] io scheduler noop registered [ 0.164949] io scheduler deadline registered [ 0.164971] io scheduler cfq registered (default) [ 0.170371] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.170387] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.170401] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.170412] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.170859] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.170902] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.171220] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.171233] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.171251] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.171293] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.171323] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.171353] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.171393] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.171866] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.171977] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.176124] tegra-pcie 3000.pcie-controller: 2x3 configuration [ 0.176236] vdd_1v5_gen: supplied by vdd_5v_in [ 0.176278] vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen [ 0.176382] tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517 [ 0.180309] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.181232] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.214746] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.216390] SuperH (H)SCI(F) driver initialized [ 0.216929] msm_serial: driver initialized [ 0.217557] console [ttyS0] disabled [ 0.217594] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.145815] console [ttyS0] enabled [ 1.149760] STMicroelectronics ASC driver initialized [ 1.156311] [drm] Initialized drm 1.1.0 20060810 [ 1.162444] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.173941] loop: module loaded [ 1.181760] m25p80 spi32766.1: w25q32 (4096 Kbytes) [ 1.186662] spi32766.1: 'partitions' subnode not found on /spi@7000da00/spi-flash@1. Trying to parse direct subnodes as partitions. [ 1.200230] libphy: Fixed MDIO Bus: probed [ 1.204735] CAN device driver interface [ 1.209378] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.216332] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.223668] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.231103] usbcore: registered new interface driver pegasus [ 1.236791] usbcore: registered new interface driver asix [ 1.242212] usbcore: registered new interface driver ax88179_178a [ 1.248330] usbcore: registered new interface driver cdc_ether [ 1.254200] usbcore: registered new interface driver smsc75xx [ 1.259976] usbcore: registered new interface driver smsc95xx [ 1.265741] usbcore: registered new interface driver net1080 [ 1.271420] usbcore: registered new interface driver cdc_subset [ 1.277358] usbcore: registered new interface driver zaurus [ 1.282986] usbcore: registered new interface driver cdc_ncm [ 1.289995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.296526] ehci-pci: EHCI PCI platform driver [ 1.300997] ehci-platform: EHCI generic platform driver [ 1.306343] ehci-omap: OMAP-EHCI Host Controller driver [ 1.311640] ehci-orion: EHCI orion driver [ 1.315721] SPEAr-ehci: EHCI SPEAr driver [ 1.319804] ehci-st: EHCI STMicroelectronics driver [ 1.324753] ehci-exynos: EHCI EXYNOS driver [ 1.329022] ehci-atmel: EHCI Atmel driver [ 1.333094] tegra-ehci: Tegra EHCI driver [ 1.337428] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.343618] ohci-pci: OHCI PCI platform driver [ 1.348082] ohci-platform: OHCI generic platform driver [ 1.353405] ohci-omap3: OHCI OMAP3 driver [ 1.357496] SPEAr-ohci: OHCI SPEAr driver [ 1.361580] ohci-st: OHCI STMicroelectronics driver [ 1.366530] ohci-atmel: OHCI Atmel driver [ 1.370828] usbcore: registered new interface driver usb-storage [ 1.377736] mousedev: PS/2 mouse device common for all mice [ 1.385470] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.392642] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.411357] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.418946] i2c /dev entries driver [ 1.427696] sdhci: Secure Digital Host Controller Interface driver [ 1.433876] sdhci: Copyright(c) Pierre Ossman [ 1.439135] Synopsys Designware Multimedia Card Interface Driver [ 1.445773] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.451923] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 1.456810] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 1.462830] sdhci-tegra 78000000.sdhci: No vmmc regulator found [ 1.468749] sdhci-tegra 78000000.sdhci: No vqmmc regulator found [ 1.474748] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.513510] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 1.524137] sdhci-tegra 78000600.sdhci: No vmmc regulator found [ 1.530058] sdhci-tegra 78000600.sdhci: No vqmmc regulator found [ 1.536056] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.578436] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 1.586864] ledtrig-cpu: registered to indicate activity on CPUs [ 1.593086] usbcore: registered new interface driver usbhid [ 1.598655] usbhid: USB HID core driver [ 1.609268] NET: Registered protocol family 10 [ 1.614276] sit: IPv6 over IPv4 tunneling driver [ 1.621366] NET: Registered protocol family 17 [ 1.625830] can: controller area network core (rev 20120528 abi 9) [ 1.634058] NET: Registered protocol family 29 [ 1.638508] can: raw protocol (rev 20120528) [ 1.642770] can: broadcast manager protocol (rev 20120528 t) [ 1.650434] can: netlink gateway (rev 20130117) max_hops=1 [ 1.656208] Key type dns_resolver registered [ 1.664938] ThumbEE CPU extension supported. [ 1.669221] Registering SWP/SWPB emulation handler [ 1.699731] tegra-pcie 3000.pcie-controller: 2x3 configuration [ 1.705719] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 1.710877] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 1.719765] tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes [ 1.749125] mmc1: new high speed MMC card at address 0001 [ 1.756381] mmcblk0: mmc1:0001 SEM16G 14.8 GiB [ 1.762244] mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 1.769045] mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 1.776583] mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB [ 1.784960] tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes [ 1.789454] Primary GPT is invalid, using alternate GPT. [ 1.789468] mmcblk0: p1 p2 p3 p4 p5 [ 2.204556] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 2.614581] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 3.024595] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 3.032778] tegra-pcie 3000.pcie-controller: link 2 down, ignoring [ 3.039083] tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00 [ 3.046044] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.052911] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.060211] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.065689] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 3.071882] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.077942] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.084704] PCI: bus0: Fast back to back transfers disabled [ 3.090274] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.098377] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.104407] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.109986] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.117206] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.124468] pci 0000:01:00.0: supports D1 D2 [ 3.128733] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.143454] PCI: bus1: Fast back to back transfers disabled [ 3.149026] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.155692] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.163431] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.169521] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.177263] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.185003] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.191091] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.196050] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.202136] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.209881] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.216935] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.223171] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.230129] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.236649] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.243528] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.249111] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.256223] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375 [ 3.266223] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.275613] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.281130] vdd_1v8_gen: supplied by vdd_5v_in [ 3.289363] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.295977] [drm] No driver support for vblank timestamp query. [ 3.301921] drm drm: No connectors reported connected with modes [ 3.307925] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.335145] Console: switching to colour frame buffer device 128x48 [ 3.347658] drm drm: fb0: frame buffer device [ 3.363821] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.372335] usb3_vbus: supplied by vdd_5v_in [ 3.378754] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.385213] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.390620] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.398461] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.413834] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.421089] hub 1-0:1.0: USB hub found [ 3.424861] hub 1-0:1.0: 1 port detected [ 3.429761] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.435175] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.442921] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.458825] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.465968] hub 2-0:1.0: USB hub found [ 3.469736] hub 2-0:1.0: 1 port detected [ 3.478207] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.492107] vdd_sata,avdd_plle: disabling [ 3.496561] usb1_vbus: disabling [ 3.502517] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.518083] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 3.528327] EXT4-fs (mmcblk0p1): recovery complete [ 3.533134] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.541245] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.558261] devtmpfs: mounted [ 3.562234] Freeing unused kernel memory: 1044K (c0dbd000 - c0ec2000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.783850] usb 2-1: new high-speed USB device number 2 using tegra-ehci